Inglenook™ Cr/Cl Series

INGLENOOK™ CR/CL SERIES

CORNER-VIEW WOOD-BURNING FIREPLACES

16-1/2 10-7/8 (419) (277)

2x4 Stud for Nailing Flange Back and Side

38-5/8 21-1/2 (981) (546) 52 (1321) 24 (610) Min. Minimum 43 (1093) to Unprotected Wall Framing Dimensions Framing Perpendicular Combustible FRONT VIEW SIDE VIEW Wall Wall FRONT VIEW

Inches (millimeters)

31 (788)

22 (559) 18-7/8 (480) 13 (331)

39-1/8 (994) Top View

42-1/2 (1080)

40 22-3/4 (1016) (578) Fireplace Dimensions Fireplace 8 8-3/4 (223) 7 (178) (204) 10-1/2 36 (915) (667) 39-1/8 (994) 16-1/4 Side View Front View (413)

Inches (millimeters)

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. P/N 900733-00, REV. NC, 07/2016 Page 1 of 2 INGLENOOK™ CR/CL SERIES

Product Reference Information Shipping Shipping Cat. No. Model Desc. Interior This ﬁ replace has been tested and ap- Weight Volume PFS ® proved by PFS Corporation under UL127/ F0698 InglenookCRP2 Radiant WS 192 lb. 23.7 cu. ft. C US ULC-S610 standard as a Factory Built Appliance and may be used with gas F0699 InglenookCLP2 Radiant WS 192 lb. 23.7 cu. ft. logs approved to ANSI Z21.60, Z21.84 Listing Report No. 09-146 or Z21.11.2 standards. F0700 InglenookCRP2 Louver WS 192 lb. 23.7 cu. ft.

Product Info Product F0701 InglenookCLP2 Louver WS 192 lb. 23.7 cu. ft.

Clearances to Combustibles Mantel Clearances Description Min. Clearance Side View Back and sides of fi replace 3/4 (19)* Combustible Top spacers 0 (0) 12-1/4 (312) Material Ref. Perpendicular side wall to opening of unit 24 (610) Bottom of fi replace to fl oor 0 (0) Chimney outer pipe surfaces 2 (51) Mantel Safe Zone for 6 (153) Projection of Chase inside dimension 16-1/2 (419) Combustible Materials Ref. 33° 5 * Not required at nailing fl anges 9 /8 15 Inches (millimeters) 8 /16 1 8 /4 9 3 (77) Nom. 7 /16 7 6 /8 No Combustible 3 6 /16 Material on Face 1 Example 1 5 /2

Clearances 1-1/2 (38) of Fireplace 13 4 /16 12 (305) Max. 1 4 /8 Min. Fireplace Example 2 7 3 /16 Opening 3 2 /4 9 (229) Min. 1 1 (26) Both 2 /16 Sides 3 1 /8 Upper Section 11/16 of Fireplace FIREBOX 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Inches (millimeters) Minimum 24 (610) from Perpendicular Side Wall Fireplace Opening Example 1: The face of a mantel, bookshelf, etc. is made of combustible material and protrudes 2-3/4” (70 mm) from the wall on which the fi replace is installed. The combustible material must be a minimum of 4” (102 mm) from side of fi replace opening. Example 2: The face of a mantel, bookshelf, etc. is made of combustible material and protrudes 11/16” (18 mm) from the wall on which the fi replace is installed. The combustible material can butt up against side of fi replace (i.e. 1” [26 mm] from fi replace opening).

Venting Typical Offset Uses Standard (8DM) and Return Elbow Installations Hi-Temp (8HT) Wood-Burning Return Elbow Chimney.

Return Elbow

Offset Elbow 6' (1.8 M) 6' (1.8 M) Offset Elbow Max. Max.

Ceiling Support Pipe 6' (1.8 M) 12S-8DM Max. Return Elbow Return Elbow Venting

6' (1.8 M) Max.

6' (1.8 M) 6' (1.8 M) Max. Max. Offset Elbow Offset Elbow Offset Elbow

AB C