K-MOTION Software & Hardware Minimum System Requirements

Total Page：16

File Type：pdf, Size：1020Kb

K-MOTION Software & Hardware Minimum System Requirements This document outlines software operating system as well as hardware configuration requirements for proper functioning of the K-VEST, K-PLAYER and K-COACH systems. Requirements may vary based on user configuration and intended usage of the K-MOTION product for 3D data and video imaging capture. Contact a friendly K-MOTION support representative with any questions you have. WINDOWS Operating System: Microsoft Windows 10 or Windows 8.1 English Language User must have Administrative Permission Processor: Intel core i5 or i7 of 2GHz or higher (or AMD equivalent) Memory: 8GB RAM or greater Hard Drive: 60 GB hard drive or greater Video Card: 512 MB Video RAM Minimum: Intel HD Graphics 2000 Recommended: Dedicated NVIDIA or AMD video card Support for DirectX 9.0 or better Ports: 1 USB 2.0 or 3.0 port Screen Resolution: 1024 x 768 Pixels Internet Connection required for initial registration and some features Internet connection not required for general use APPLE Intel-based Apple running a supported version of Windows above VMware Fusion/ VirtualBox/ Parallels for Mac ARE NOT SUPPORTED The iPad does NOT support Boot Camp and therefore cannot run the software Mac must meet all other Windows requirements above NOTE: K-MOTION software is designed to run on the Windows operating system. Support for Apple devices is available only when configured with Windows on Apple’s Boot Camp software. For more information about Boot Camp please visit Apple’s website: https://support.apple.com/boot-camp k-motion.com [email protected] 603.472.3519.

Copy Link

Recommended publications

FCS Remover User Manual 1
FCS Remover User Manual 1 FCS Remover User Manual FCS Remover enables you to completely remove Final Cut Studio, Final Cut Pro X, Final Cut Express and Final Cut Server from your system. This is essential as a troubleshooting aid or when upgrading to a major new version of the software. Last updated 09/15/14 FCS Remover User Manual 2 Quick Start 1. You will be presented with the following screen upon launching the application: 2. If you wish to uninstall all components of Final Cut Studio and you have no other Apple Pro Apps such as Logic or Shake on your system, skip to Step 4. 3. If you only wish to remove certain components, use the check boxes to select and deselect them or use the Preset dropdown menu at the top of the window. Last updated 09/15/14 FCS Remover User Manual 3 The following presets are available: All – Selects all components. All Final Cut Studio / Express – This selects all Final Cut Studio / Express components and not Final Cut Server. All Final Cut Server – This selects all Final Cut Server components and not Final Cut Studio. Compressor and Qmaster Only – This selects only Compressor and Qmaster, as these are the most commonly reinstalled applications. Maximum Compatibility – This removes Final Cut Studio but does not remove Final Cut Studio components that are shared by other Apple ProApps such as Logic and Shake. This allows you to remove Final Cut Studio without harming your other ProApp installations. Receipts only – This only removes receipts. Receipts are used by the Final Cut Studio installer to keep track of what has been installed, so removing only receipts is a way of causing the installer to overwrite the original files on the disk without actually removing them.
[Show full text]
Shake User Manual
Shake Homepage.qxp 5/20/05 6:25 PM Page 1 Shake 4 User Manual To view the user manual, click a topic in the drawer on the side. Otherwise, click a link below. m Late-Breaking News m New Features m Tutorials m Cookbook m Keyboard Shortcuts m Shake Support m Shake on the Web m Apple Training Centers Apple Computer, Inc. FilmLight Limited (Truelight): Portions of this software © 2005 Apple Computer, Inc. All rights reserved. are licensed from FilmLight Limited. © 2002-2005 FilmLight Limited. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent FLEXlm 9.2 © Globetrotter Software 2004. Globetrotter of Apple. Your rights to the software are governed by and FLEXlm are registered trademarks of Macrovision the accompanying software license agreement. Corporation. The Apple logo is a trademark of Apple Computer, Inc., Framestore Limited (Keylight): FS-C Keylight v1.4 32 bit registered in the U.S. and other countries. Use of the version © Framestore Limited 1986-2002. keyboard Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple Industrial Light & Magic, a division of Lucas Digital Ltd. may constitute trademark infringement and unfair LLC (OpenEXR): Copyright © 2002 All rights reserved. competition in violation of federal and state laws. Redistribution and use in source and binary forms, with or without modification, are permitted provided that Every effort has been made to ensure that the the following conditions are met: information in this manual is accurate. Apple Computer, Inc. is not responsible for printing or clerical errors.
[Show full text]
Motion 1.0: Late-Breaking News (Manual)
1 Late-Breaking News About Motion Motion Clarifications Align to Motion behavior When using the Motion Path behavior, the Align to Motion behavior (from the Simulation subcategory) has no effect. Align to Motion is designed to work with a keyframed animation path. You can use the Snap Alignment to Motion behavior (from the Basic Motion subcategory) once a Motion Path behavior is applied to an object. Blend Mode The Premultiplied Mix blend mode performs an unpremultiply composite—the foreground image is assumed to be premultiplied. Artifacts may appear as result of unpremultiplying pixels whose RGB and alpha values are very small (resulting in pixels with values of 255). In some cases, the hardware performs bilinear filtering and then the blend mode unpremultiplies the alpha. Field Dominance Motion projects with field dominance set in Project Properties, will not be encoded or rendered with field interlacing unless Field Rendering is enabled in the View menu of the Canvas. Enabling this setting will also improve playback quality of motion on an interlaced monitor. Filters Pasting a filter does not paste at the current playhead location. Suggestion: Paste the filter, then press the Shift key while you drag the pasted object. As you approach the current playhead location, it snaps into place. Panning To pan the Canvas at any time, hold the Space bar down, then drag in the Canvas. The Pan tool is temporarily selected in the Toolbar. 1 Particles If you apply certain transformations, such as a scale, rotate, or shear, to an object used as a particle cell source, the transformation is not respected.
[Show full text]
Pro Apps Vancouver Courses
pro apps vancouver courses FCP 101 Introduction to Final Cut Pro 7 Teaches basic editing functions while familiarizing students with the basic user interface. (3 days) $1,395* – Upcoming Course: November 8 - 10 FCP 200 Comprehensive Study of Final Cut Pro 7 Provides an in-depth study of the primary feature set and basic interface of Final Cut Pro. (5 days) $1,795* – Upcoming Course: November 8 - 12 FCP 300 Final Cut Pro 7 Advanced Editing Covers advanced editing techniques, including creating polished transitions, fixing screen direction errors, editing multi-camera projects, and compositing like a pro. Also covers advanced workflows for managing media and working with film. (3 days) $1,395* – Upcoming Course: January 24 - 26 FCP + Motion Bootcamp Final Cut Pro 101 + Motion 101 Combined An intense session that combines the Introduction to Final Cut Pro and the Introduction Ask to Motion training courses into a solid week of instruction. (5 days) About $2,295* – Upcoming Course: Please contact us. Motion 101 Introduction to Motion 4 Covers interface fundamentals, particles, blend modes, layer organization, and Custom fundamental multi-layer editing. (3 days) $1,295* – Upcoming Course: Please contact us. Courses! Color 101 Introduction to Color Correction in Final Cut Studio Introduces students to Final Cut Studio’s color correcting capabilities. Start with the If you don’t see basics of color correction in Final Cut Pro and move on to the fine points of secondary grading in Color. (2 days) exactly what you need $1,095* – Upcoming Course: November 15 - 16 we can customize Logic Pro 101 Introduction to Logic Express 9 and Logic Pro 9 Introduces students to the primary feature set and basic user interface of Logic the perfect solution Express and Logic Pro.
[Show full text]
Software Soloist Motion Composer Suite
SOFTWARE SOLOIST MOTION COMPOSER SUITE The Power to Differentiate Your Process Connect and Go The Soloist Motion Composer Suite is the development solution Setting up your smart drive solution is easy. Quickly set up your motion control application needs. Part of the Soloist single- drives, motors, and stages with the Configuration Manager axis motion control platform, the Motion Composer Suite allows application. This is just one of several tools integrated in the you to deploy advanced automation that outpaces competitive Motion Composer Suite that makes drive, controller, and servo solutions. The suite includes the following products: configuration fast and effective. • Soloist Configuration Manager Setting up an automation process is also quick and easy. The Soloist smart drives include an integrated controller that can talk • Soloist Motion Composer IDE over EtherNet/IP, Ethernet TCP/IP, RS-232, RS-485, and Modbus • Soloist Digital Scope TCP. Powerful Technology, Simply Integrated Fieldbus I/O and expandable I/O on Aerotech drive hardware is The Soloist solution is a powerful performance tool that can directly accessible within the AeroBasic real-time programming be simply integrated into your system. The Motion Composer language. Suite gives you more precision at your fingertips through Develop and Test Real-Time Applications a user-friendly interface with tools for each aspect of your The Soloist Motion Composer Suite includes a powerful development process. Using the Motion Composer Suite, you can environment for real-time developers. The Motion Composer IDE deploy real-time application code to a smart, single-axis drive allows real-time application code to be developed, debugged, and which includes an integrated controller.
[Show full text]
Using Motionvfx Templates
Using MotionVFX templates Installing templates 2 Motion 5 Overview 4 Replacing Drop Zones and Texts 5 Sharing 6 FCPX Finding projects 7 Replacing Drop Zones and Texts 8 Cutting 9 Sharing 11 Installing templates The easiest and the most efficient way of installing our templates & plugins is through our desktop app mInstaller. Download mInstaller from our website motionvfx.com/minstaller and drag & drop it to the Applications folder. After the installation you can find it in the menu bar in the upper right corner. Log into it using your MotionVFX Login and password - after that the app will allow you to access all of your purchases. 2 Now you can download, install, repair and also convert Apple Motion projects’ FPS right inside mInstaller. Remember All of our products require the latest versions of their supported host software (FCPX/Motion 5/Adobe's After Eects/etc.) as well as the latest version of OS X (if appliable). 3 Motion 5 All Motion templates can be and fully edited in Motion 5. In Final Cut Pro X you can access the speciﬁcally marked (published) parameters such as texts and Drop Zones. Every MotionVFX project can be opened in Motion 5 from mInstaller. To easily customize a project in Motion 5, open the project’s properties (by selecting the Project layer and going to the Inspector > Project ) and pick the Publishing tab. 4 Replacing Drop Zones and Texts The easiest way to replace a Drop Zone is to drag and drop your footage from Finder onto the proper Drop Zone visible in the viewport.
[Show full text]
Videodisc Control and Video Playback on the Computer
Understanding Videodisc Control and Video Playback on the Computer James D. Lehman Educational Technology Purdue University How is control of a videodisc player and video playback accomplished from within an authoring environment such as HyperStudio, HyperCard, Toolbook, or Director? Although the precise answer to this question varies from program to program, the basic processes are the same regardless of the system. Let's see what those processes are. All modern industrial videodisc players have a built-in serial port. A computer is able to direct the actions of the videodisc player by sending appropriate signals through the serial port, in much the same way that the computer communicates with a modem. To accomplish videodisc control from the computer, one simply needs an appropriate cable connection from the computer's serial port to the videodisc player's serial port and software that can communicate with the serial port. (Note: the needed cable is specific to videodisc players and should be ordered from a vendor that deals in videodisc players.) Codes sent by the computer tell the videodisc player what to do. See the Pioneer videodisc commands following for information about the Pioneer two-letter codes. (Sony uses a numeric system we will not explore.) Software that can communicate with the serial port is a key requirement. Most modern authoring tools do not have the capability to communicate with the computer's serial port directly. As a result, some sort of add-on or special software is needed. This software is known as driver software; it is low-level software (often written in C or assembly language) that controls the interplay between the authoring environment on the computer and the videodisc player.
[Show full text]
Motion Graphics and Effects in Final Cut Studio
Instructor Guide Motion Graphics and Effects in Final Cut Studio Final Cut Studio 2 Instructor Guide Motion Graphics and Effects in Final Cut Studio Contents Contents About this instructor guide . .3 Preparing the classroom . .4 Essential teaching information . .8 Final Cut Studio 101 Agenda . .10 About the Final Cut Studio Level Onecertification exam . 26 Final Class wrap up . 30 Post-class cleanup . .31 2 For personal use only. Not for resale. Instructor Guide Motion Graphics and Effects in Final Cut Studio About this instructor guide This instructor guide is a companion to the FCS 101: Motion Graphics and Effects in Final Cut Studio course, and should be used by all Apple Certified Trainers (ACTs). It includes helpful pointers for teaching each lesson and lists all the files and materials needed to teach the class, including how much storage space the media files require. We strongly recommend that you read this document before teaching any classes. You should also review Apple Pro Training Series: “Motion Graphics and Effects in Final Cut Studi,o by Mark Spencer and Jem Schofield (ISBN: 0321509404). You can order the courseware with a 35% discount at http://www.peachpit.com/appletrainers. This link works internationally and you won’t need a discount code. Please don’t redistribute this link, because it’s only for ACTs and trainer candidates. this instructorAbout guide You should also review the tutorials at www.apple.com/finalcutstudio/ tutorials/ as well as the New Features Guide. You should also review the Apple ProRes 422 white paper, which you can download from www.apple.com/finalcutstudio/finalcutpro/support.html .
[Show full text]
Final Cut Express 4 Product Overview November 2007 Product Overview Final Cut Express 4
Final Cut Express 4 Product Overview November 2007 Product Overview Final Cut Express 4 Contents Page 4 Welcome to Final Cut Express 4 More Powerful Video Editing for DV, HDV, and AVCHD A Workflow That Grows with You Expanded Creative Capabilities More Than One Way to Show Off Page 6 Selected New Features Use Movies Captured from AVCHD Camcorders Mix Different Formats in a Timeline Expand Your Effects for Visually Rich Looking Movies Bring Your iMovie ’08 Projects into Final Cut Express 4 Page 7 Getting Footage into Your Computer Capture Your Footage Easy Asset Management Page 10 A Tour of the Editing Environment The Browser: Get an Overview of Your Assets The Viewer: Select Assets and Preview Changes The Timeline: Put the Pieces in Place The Canvas: See It All Come Together Customize the Interface: Work the Way You Want The Autosave Vault: Save Your Stuff Page 16 Powerful Editing with Final Cut Express Make Professional Edits Refine Your Edits with Trimming Add Transitions and Effects Page 1 Compositing and Titles Use Multiple Video Layers Speak with Titles Page 5 Audio Real-Time Audio Filters Precise Controls Voice Over Tool Product Overview Final Cut Express 4 Page 7 Finding Your Audience Print to Video Create a DVD Export Video for the Web Page 8 Product Features Page 33 Product Availability and Support Pricing Availability System Requirements Support Product Overview 4 Final Cut Express 4 Welcome to Final Cut Express 4 Final Cut Express 4 is the perfect video editing tool for videomakers who want creative freedom and professional-quality results.
[Show full text]
Quicktime File Format Specification Contents
QuickTime File Format Specification Contents Introduction to QuickTime File Format Specification 17 Organization of This Document 17 Licensing Information 18 Special Fonts 18 Updates to This Specification 18 For More Information 19 Overview of QTFF 20 Media Description 20 Atoms 20 Atom Layout 22 Atom Structure 22 QT Atoms and Atom Containers 24 QT Atom Containers 27 QuickTime Movie Files 30 The File Type Compatibility Atom 33 Free Space Atoms 35 Movie Data Atoms 35 Preview Atoms 35 Movie Atoms 37 Overview of Movie Atoms 38 The Movie Atom 40 The Movie Profile Atom 42 Movie Header Atoms 43 Color Table Atoms 46 User Data Atoms 47 Track Atoms 54 Track Profile Atom 57 Track Header Atoms 57 Track Exclude From Autoselection Atoms 61 Track Aperture Mode Dimension Atoms 61 Clipping Atoms 66 Clipping Region Atoms 67 2012-08-14 | © 2004, 2012 Apple Inc. All Rights Reserved. 2 Contents Track Matte Atoms 68 Compressed Matte Atoms 69 Edit Atoms 69 Edit List Atoms 70 Track Load Settings Atoms 71 Track Reference Atoms 73 Track Input Map Atoms 76 Media Atoms 79 Media Header Atoms 80 Extended Language Tag Atom 82 Handler Reference Atoms 84 Media Information Atoms 85 Video Media Information Atoms 86 Video Media Information Header Atoms 87 Sound Media Information Atoms 88 Sound Media Information Header Atoms 89 Base Media Information Atoms 89 Base Media Information Header Atoms 90 Base Media Info Atoms 91 Data Information Atoms 92 Data Reference Atoms 94 Sample Atoms 95 Sample Table Atoms 96 Sample Description Atoms 99 Time-to-Sample Atoms 101 Composition Offset Atom 103 Composition Shift Least Greatest Atom 105 Using Composition Offset and Composition Shift Least Greatest Atoms 106 Sync Sample Atoms 107 Partial Sync Sample Atom 108 Sample-to-Chunk Atoms 109 Sample Size Atoms 111 Chunk Offset Atoms 113 Sample Dependency Flags Atom 115 Using Sample Atoms 116 Compressed Movie Resources 117 Allowing QuickTime to Compress the Movie Resource 118 Structure of a Compressed Movie Resource 118 Reference Movies 119 2012-08-14 | © 2004, 2012 Apple Inc.
[Show full text]
Apple Qmaster Distributed Processing Setup Guide Copyright © 2009 Apple Inc
Apple Qmaster Distributed Processing Setup Guide Copyright © 2009 Apple Inc. All rights reserved. Apple, the Apple logo, Bonjour, Final Cut, Final Cut Pro, Final Cut Studio, FireWire, Logic, Logic Studio, Mac, Mac OS, Your rights to the software are governed by the QuickTime, Shake, Xsan, and Xserve are trademarks of accompanying software license agreement. The owner or Apple Inc., registered in the U.S. and other countries. authorized user of a valid copy of Final Cut Studio or Logic Studio software may reproduce this publication for Apple Remote Desktop, Finder, and NetInfo are trademarks the purpose of learning to use such software. No part of of Apple Inc. this publication may be reproduced or transmitted for commercial purposes, such as selling copies of this AppleCare is a service mark of Apple Inc., registered in the publication or for providing paid for support services. U.S. and other countries. The Apple logo is a trademark of Apple Inc., registered in Adobe, the Adobe logo, Acrobat, the Acrobat logo, the U.S. and other countries. Use of the “keyboard” Apple Distiller, PostScript, and the PostScript logo are trademarks logo (Shift-Option-K) for commercial purposes without or registered trademarks of Adobe Systems Incorporated the prior written consent of Apple may constitute in the U.S. and/or other countries. trademark infringement and unfair competition in violation “Dolby,” “Pro Logic,” and the double-D symbol are of federal and state laws. trademarks of Dolby Laboratories. Confidential Every effort has been made to ensure that the information Unpublished Works, © 1992–1997 Dolby Laboratories, Inc.
[Show full text]
Final Cut Express
oit UMass Office of Information Technologies Final Cut Express Intermediate Video Editing on a Mac Introduction ........................................................................................ 2 The Interface ..................................................................................... 3 Keep Organized ................................................................................ 4 Import Media ..................................................................................... 5 Assemble Video Projects ................................................................... 7 Edit Video .......................................................................................... 9 Work with Still Images ..................................................................... 10 Transitions, Effects, Text .................................................................. 12 Work with Audio ...............................................................................13 Export a Movie ... ............................................................................. 14 Appendix: Storage Space Needed for Digital Video ... ....................16 OIT Academic Computing Lederle Graduate Research Center University of Massachusetts Amherst Phone: (413) 577-0072 Email: [email protected] http://www.oit.umass.edu/academic This handout based on: Final Cut Express 4.0 October 19, 2009—JC Gray Sawyer Final Cut Express - Video Editing on a Mac 2 Introduction Final Cut Express is a user-friendly digital video editing application for Macintosh
[Show full text]