Gemini 2500 Series Are Made of 25 Gauge Galvanized Steel

Total Page:16

File Type:pdf, Size:1020Kb

Gemini 2500 Series Are Made of 25 Gauge Galvanized Steel N INDUS CA TR RI Y E S M T A A N H D T A I R W D A H S A U R D N I W E A D R A E M Gemini Collection A unique combination of safety, economy and selection 2500 Series 25 Gauge / 2” Sections Safety, Economy, Selection Choose your own design The Hörmann Gemini Collection offers you a wide range of styles and a broad variety of design options to enhance the beauty of your home. The virtually maintenance-free Gemini 2500 Series are made of 25 gauge galvanized steel. Precisely designed tongue and Traditional Ranch groove section joints reduce air infiltration and creates weather-tight seal. Well-defined panel embossments, easy to clean woodgrain texture, galvanized and finish painted steel provide years of trouble-free performance and Country Cottage beauty. The bottom weather seal keeps out wind, rain, debris and other elements for added energy savings. Shaker Medley* Hörmann Innovations *Ask your dealer for details *Also available in other designs Safety Bottom Fixture Superior and Safe Windows Custom Door Heights Hörmann garage doors utilize safety fixtures on their Hörmann window insert frames are recessed to the panel The Gemini Collection is now available in door heights up bottom sections for added safety for your peace of mind. surface to give your door a cleaner look. Tempered safety to 14’ tall. glass panes offer extra layer of safety in case of breakage. Choose the color which best suits your home Select your favorite window design White Sandstone Golden Oak Standard Short Standard Long Almond Brown Medium Oak Cross Short Cross 6 Long Teratone Desert Tan Walnut Cross Arch Cross 8 & Cross Arch Long Metallic Silver Hunter Green Rosewood Stockbridge Short Stockbridge & Arch Long Black Prairie Short Prairie Long All colors shown as accurately as printing technology allows. Specifications Cathedral Short Cathedral Long Series Gemini 2500 Steel Thickness 25 ga. Section Thickness 2 in. Cascade Short Cascade Long R - Value Up to 7.4 with Optional Insulation Polystyrene Core Insulation Optional Diamond Short Diamond Long Panel Designs Traditional Standard Ranch Standard Country Standard Sherwood Short Sherwood Long Cottage Standard Shaker Standard Medley Standard Available Colors White Standard Sunrise Non-insulated glass. Sandstone Standard Almond Standard Desert Tan Standard Brown Standard Diamond Glass Dynasty Glass Teratone Optional Hunter Green Optional Metallic Silver Optional Black Optional Dakota Zinc Acrylic Dakota Brass Acrylic Golden Oak Optional Medium Oak Optional Walnut Optional Sunburst Zinc Acrylic Sunburst Brass Acrylic Rosewood Optional Decorative windows are available in single pane glass, Traditional and Country design only. Standard Warranty Sections Limited Lifetime Hardware 2 years Extension Springs 1 year The advanced technology in SilentDrive® Torsion Springs 2 years garage door openers provide: - Ultra quiet performance Additional size, color and design options available via Hörmann Solution Advantage. - Unique safety features Please call us at 1-877-OK-HORMANN (1-877-654-6762) for more details. - Maximum convenience AVAILABLE FROM: Call us u 1 877 OK HORMANN (1-877-654-6762) Hörmann LLC, 450 Airport Road, Sparta, TN 38583 Phone: 630-859-3000 Fax: 630-859-8122 Email: [email protected] www.hormann.us 27800346 / Printed in USA ©Hörmann LLC H/E/PK/#2000 (VERSION 1, PRINT 05.20) Everything you’ve you’ve always always wanted wanted in ain garage a garage door, door, and andmore. more..
Recommended publications
  • Detached Garage / Pool House Application Requirements *
    TOWN OF EAST FISHKILL BUILDING AND ZONING DEPARTMENT 330 Route 376, Hopewell Junction, NY 12533 (845) 221-2427 Fax (845) 227-4018 http://www.eastfishkillny.org DETACHED GARAGE / POOL HOUSE APPLICATION REQUIREMENTS * ALONG WITH THE COMPLETED APPLICATION, PLEASE PROVIDE THE FOLLOWING ITEMS: IF DETACHED GARAGE/POOL HOUSE IS A PRE-FAB, A COPY OF BROCHURE NOTING MAKE, MODEL AND SIZE. IF DETACHED GARAGE/POOL HOUSE IS BEING CONSTRUCTED, 2 COPIES OF PLANS/DRAWINGS SHOWING SPECIFICATIONS OF STRUCTURE. (PLANS MUST BE STAMPED IF 500 SQ. FT. AND OVER.) A COPY OF SURVEY SHOWING LOCATION OF STRUCTURE WITH SETBACKS NOTED. ANY DETACHED GARAGE/POOL HOUSE 500 SQ. FT. AND OVER REQUIRES 3 COPIES OF STAMPED PLOT PLAN (SURVEY) SHOWING LOCATION OF ADDITION WITH FRONT, SIDE AND REAR SETBACKS NOTED (TO BE APPROVED BY ENGINEERING: REVIEW FEE/$250). PLOT PLAN REQUIREMENTS CAN BE OBTAINED AT THE BUILDING DEPARTMENT. (** AN AS-BUILT AND FINAL SURVEY MAY BE REQUIRED.) INSURANCE FORMS FOR CONTRACTORS OR “SELF” (See insurance info in permit application packet. Forms must be submitted with application. No faxing/emailing.) IF APPLICANT IS NOT THE HOME OWNER/PROPERTY OWNER, AN ORIGINAL, SIGNED, NOTARIZED LETTER FROM THE OWNER WILL BE REQUIRED GRANTING PERMISSION TO APPLY FOR PERMIT. (Applicant may obtain signature on application from owner, thus notarized letter not required.) FEE: PLEASE SEE FEE SHEET ATTACHED TO THE BUILDING PERMIT CASH OR CHECK MADE OUT TO: TOWN OF EAST FISHKILL Note: Construction without a permit is double the fee: As-Built Fee (* Not to exceed 750 sq. ft. or 60% of the square footage of the footprint of the principal structure, whichever is greater in size and 1 ½ stories or 25 ft/height without ZBA approval.
    [Show full text]
  • Residential Bathroom Remodel Based on the 2016 California Residential, Electrical, Plumbing and Mechanical Code
    BUILDING & SAFETY DIVISION │ PLANS AND PERMITS DIVISION DEVELOPMENT SERVICES CENTER 39550 LIBERTY STREET, FREMONT, CA 94538 P: 510.494.4460 │ EMAIL: [email protected] WWW.FREMONT.GOV SUBMITTAL AND CODE REQUIREMENTS FOR AN RESIDENTIAL BATHROOM REMODEL BASED ON THE 2016 CALIFORNIA RESIDENTIAL, ELECTRICAL, PLUMBING AND MECHANICAL CODE PERMIT INFORMATION: A permit is required for bathroom remodels that include the replacement of the tub/shower enclosure, relocation of plumbing fixtures or cabinets, or if additional plumbing fixtures will be installed. A permit is not required for replacement of plumbing fixtures (sink or toilet) in the same location. Plans shall be required if walls are removed, added, altered, and/or if any fixtures are removed, added or relocated. All requirements shall in conformance to the currently adopted codes. THINGS TO KNOW: □ A Building Permit may be issued only to a State of California Licensed Contractor or the Homeowner. If the Homeowner hires workers, State Law requires the Homeowner to obtain Worker’s Compensation Insurance. □ When a permit is required for an alteration, repair or addition exceeding one thousand dollars ($1,000.00) to an existing dwelling unit that has an attached garage or fuel-burning appliance, the dwelling unit shall be provided with a Smoke Alarm and Carbon Monoxide Alarm in accordance with the currently adopted code. □ WATER EFFICIENT PLUMBING FIXTURES (CALIFORNIA CIVIL CODE 1101.4(A)): The California Civil Code requires that all existing non-compliant plumbing fixtures (based on water efficiency) throughout the house be upgraded whenever a building permit is issued for remodeling of a residence. Residential building constructed after January 1, 1994 are exempt from this requirement.
    [Show full text]
  • For Sale Large 4 Bedroom TERRACED HOUSE
    For Sale Large 4 Bedroom TERRACED HOUSE & Interconnecting 6 Car Garage With Country Views General Information Description Status: For Sale Located on the outskirts of Mqabba, is this 4 bedroomed TERRACED HOUSE enjoying unobstructed country views. Offered At: €310,000 Price(LM): (Lm133,083) The spacious accommodation comprises of a formal sitting room, guest shower, Location: Mqabba kitchen/dining/living room with access to a back yard, 4 bedrooms, bathroom, a large terrace and a washroom. Type: Terraced House Category: Residential Complimenting this property is an interconnecting 6 car garage with shower room, 2 storage rooms and a back yard. Finish: Highly Code: SS Property is being sold freehold and will make a beautiful family home. Ref Number: 3303 Contact Information Mobile: +356 79708350 E-Mail: [email protected] Ref: 3303 €310,000 These details are intended as a guide and do not form part of a contract. Buyers should satisfy themselves as to any information contained therein. For Sale Large 4 Bedroom TERRACED HOUSE & Interconnecting 6 Car Garage With Country Views Summary Room Dimensions Bedrooms – 4 Entrance Hall – 2.48x4.17 – (10.35sqm) Yard – Yes Formal Sitting Room – 4.02x4.24 – (17.06sqm) Hall – 8.52x2.47 – (21.10sqm) Garage – Yes Bedroom – 4.04x3.98 – (16.14sqm) Freehold – Yes Shower – 2.32x2.96 – (6.88sqm) Water Well – Yes Kitchen/dining/living – 4.72x6.67 – (31.57sqm) Unobstructed Country Views - Yes Yard – 2.03x3.13 – (6.37sqm) Bathroom – 2.32x2.98 – (6.93sqm) Bedroom – 4.03x3.96 – (16.01sqm) Bedroom – 3.98x4.28 – (17.07sqm) Features Terrace – (13.85sqm) Bedrooms 4 Bedroom – 3.57x5.70 – (20.41sqm) Washroom – 4.72x4.67 – (22.07sqm) Bathrooms 3 Roof – 9.12x6.69 – (61.11sqm) Kitchen W/Appliances Garage – 6.38x12.78 – (81.58sqm) Shower in Garage – 5.14x2.42 – (12.49sqm) Living Room in Garage – 4.80x3.32 – (15.98sqm) Garage 6 Room in Garage – 2.85x3.58 – (10.22sqm) Yard in Garage – 4.27x3.11 – (13.30sqm) Roof Plot 23ftx83ft No.
    [Show full text]
  • Additional Code Requirements
    ADDITIONAL CODE REQUIREMENTS #___________________ m 2012 International Residential Code & 2012 International Building Code PROVIDE ON-SITE ALL DELAWARE SEALED SPECIFICATIONS FOR ANY MANUFACTURED & ENGINEERED STRUCTURAL BUILDING COMPONENTS INCLUDING BUT NOT LIMITED TO: WOOD TRUSSES, I-JOISTS, STRUCTURAL COMPOSITE LUMBER & STEEL BEAMS. The approved set of prints shall be kept at the job site and open to inspection. *** A separate Inspection for perimeter or under slab insulation board for “Pole Building” style Dwellings or Dwellings with a Monolithic turn down slab or slab on grade foundation is required. R302 FIRE-RESISTANT CONSTRUCTION: Construction, projections, openings & penetrations of exterior walls of dwellings & accessory buildings shall comply with Table R302.1(1). R302.2 TOWNHOUSES: Each townhouse shall be considered a separate building & shall be separated by fire-resistance-rated wall assemblies. R302.5 DWELLING/GARAGE OPENING/PENETRATION PROTECTION (garage door to house separation):self-closing, 3 solid wood doors/steel doors ≥1 /8 inches in thickness or 20-minute fire-rated doors. Openings into non-sleeping rooms only. 1 R302.6 DWELLING/GARAGE FIRE SEPARATION: from the residence and attics: ≥ /2-inch gypsum board applied to the garage 5 side; habitable rooms above the garage: /8-inch Type X gypsum board; garages located less than 3 feet from a dwelling unit on 1 the same lot: ≥ /2-inch gypsum board applied to the interior side of exterior walls 1 R302.7 UNDER-STAIR PROTECTION: Enclosed accessible space under stairs shall be protected with /2-inch gypsum board. R303.7 STAIRWAY ILLUMINATION: All interior & exterior stairways shall be provided with a means to illuminate the stairs, landings and treads; exterior stairways: artificial light source located in the immediate vicinity of the top landing; exterior stairways (access to a basement from the outside): artificial light source located in the immediate vicinity of the bottom stairway landing.
    [Show full text]
  • Timeless Collection
    2020 TIMELESS COLLECTION The Quality Garage Door.™ Classic Style. Distinctive Design. For a truly lasting design, explore the Timeless Collection from C.H.I. Overhead Doors. The distinctive stamp designs and extensive personalizing options ensure the perfect complement to your home’s exterior. Short raised panel shown in white with optional stockton inserts and tinted glass. Find Your Perfect Match Timeless style and traditional stamped steel designs to complement any home. RAISED PANEL Reliable and low maintenance, these doors are a neighborhood standard and feature a classic garage door design. STAMPED CARRIAGE HOUSE These doors merge traditional carriage house style with simple design and functionality. STAMPED SHAKER Featuring distinctive shaker style, these minimalist doors leave a lasting impression. WANT TO SEE MORE? Visit chiohd.com/raised-panel Long raised panel shown in optional accents woodtones dark oak with madison inserts and obscure glass. 4 Short raised panel shown in black. RAISED PANEL Short raised panel shown in white with optional stockton inserts and tinted glass. Long raised panel shown in white with optional sherwood inserts and plain glass. 5 Section Detail Available in both short and long panel options. The raised panels start with a recessed edge, but the interior surface of each panel is brought slightly forward, adding just a hint of definition to a classic garage door design. Short Raised Panel Long Raised Panel SECTIONS SPRINGS HARDWARE Limited Lifetime 3 Years 3 & 6 Years Short raised panel shown in accents woodtones natural oak. 6 Model Comparison Chart GOOD BETTER BEST Panel Style / Model Number3 Short Raised Panel 2250 2240 2255 2251 2241 2283 2206 2216 Long Raised Panel 4250 4240 4255 4251 4241 4283 4206 4216 2in.
    [Show full text]
  • Deck Requirements for Manufactured Homes
    NC MANUFACTURED HOME - DECK CODE (These are minimum requirements for the steps and platforms on manufactured homes. Any deck 36 square foot or larger will need to comply with the NC Residential Building Code) 3.11 EGRESS REQUIREMENTS 3.11.1 Egress – General Requirements: Federal regulations require that each manufactured home have a minimum of two exterior egress doors that are located remotely from each other. Where any means of egress from a manufactured home, including sliding glass doors, is not substantially level with grade, such differences in elevation shall be negotiated by stairs or ramps, which are constructed in accordance with Sections 3.11.2 and 3.11.3. Landings shall comply with Section 3.11.4. Egress stairs, ramps and landings shall be provided and installed by the selling party unless specifically contracted otherwise by the homeowner. 3.11.2 Exterior Steps and Stairways 3.11.2.1 General – All stairs and landings constructed in accordance with this Code shall be entirely self-supporting unless designed and approved by a registered Engineer of Architect. Adequate bracing of stairway and landing structures shall be provided as required for lateral stability. 3.11.2.2 Footings for Stairway and Landing Structures – All support posts for exterior stairway and landing structures shall rest on a minimum 8” x 16” x 4” thick concrete masonry or 8” x 16” x 6” thick poured in place concrete footing. The bottom of such footings shall be below the frost line (6” in Buncombe County). EXCEPTION: Stair or landing structures designed specifically to be set directly on the ground do not require footings as described above.
    [Show full text]
  • Information Required for a Detached Garage
    ONLINE PERMITS www.cityofroseville.com/epermits COMMUNITY DEVELOPMENT DEPARTMENT 2660 Civic Center Drive, Roseville, MN 55113 INSPECTION SCHEDULING and GENERAL INFORMATION 651-792-7080 INFORMATION REQUIRED FOR A DETACHED GARAGE 1. Signed, completed Building Permit application form. 2. Two copies of a Site Plan based on a current Certificate of Survey, drawn to scale indicating the lot dimensions, the location and ground coverage area of existing structure(s), and the location and area of the proposed structure. Indicate drainage pattern with arrows. 3. Two copies of plans showing proposed design and materials. Plans shall be drawn to scale and shall include the following: A. A floor plan indicating: • Proposed garage size • Type, size, spacing and direction of roof framing • Size of window and door headers • Location and size of window and door openings B. Cross-section plan indicating: • Footing/slab design and size • Exterior wall construction materials • Roof Construction materials • Roof slope C. An elevation plan indicating: • Front and side view of the proposed garage • Approximate height of structure • Location of door(s) and windows • Siding and roof covering materials • Size of all overhangs *Attached are examples of drawings which may assist you. They are intended as a guide only. MOST COMMON LAND-USE RESTRICTIONS: (Residential Zoning District Only) This is not an all-inclusive list. Contact the Community Development Department for specific restrictions of your lot. 1. Locating the property corner irons (legal markers) is the responsibility of the property owner and the irons must be visible when the footing inspection is requested. Setbacks are measured from the legal property line.
    [Show full text]
  • RS-15- Common Residential Codes
    Full Service Center East Area Service Center 827 7th Street, Room 102 5229 Hazel Avenue, Suite B Sacramento, CA 95814 Fair Oaks, CA 95628 M-F 8:30am - 4:30pm M-Tu. 9:00am - 4:00pm Building Permits & Inspection Division Bradshaw Center North Area Service Center 9700 Goethe Road, Suite A 3331 Peacekeeper Wy, Suite 100 General Information: (916) 875-5296 Sacramento, CA 95827 McClellan, CA 95652 www.building.saccounty.net M-F 8:30am - 4:30pm W-Th. 9:00am - 4:00pm COMMON RESIDENTIAL CODES Project Description Date Case No. These sheets, when attached to a set of plans, become part of those plans and must remain attached thereto. The approval of this plan and the specifications shall not be held to permit or approve the violation of any County ordinance or State or Federal law. Sacramento County currently enforces the 2016 California Building Code (CBC), 2016 California Residential Code (CRC), 2016 California Mechanical Code (CMC), 2016 California Electrical Code (CEC), 2016 California Plumbing Code (CPC), 2016 California Fire Code (CFC), 2016 California Energy Commission Standards (CESC) and the current California Health and Safety Codes as well as Sacramento County locally adopted amendments to such codes. I have read and will comply with the items in this document and as marked on the plans. I am aware that the text and code sections referenced in this form may be appealed as per SCC 105. Date Signature of: Owner Authorized Agent Contractor Architect/Engineer BUILDING CODE REQUIREMENTS Section R301 Design Criteria B-1 R301.1.1 Alternative provisions. Conventional Light-Frame Construction complying with the AF&PA (WFCM) is an acceptable alternative to this CRC provision, when addressing prescriptive framing requirements.
    [Show full text]
  • Single-Family Home Requirements in the R Zoning Districts
    Single-Family Home Requirements in the R Zoning Districts This brochure summarizes requirements for remodels and additions to single-family homes located in the RH, R-1, R-2, R-3, R-4 and R-5 Zoning Districts. If your home is located in another zoning district, please consult a planner for requirements specific to your zone. A separate brochure is available for site work such as sheds, fences, arbors, pools, spas and tree removal. Planning an Addition or Remodel? Get started with the following steps: 1. Zoning - Check the zoning of your property at http://pubgis.redwoodcity.org/gis/ 2. Historic Status – Confirm whether the property has been evaluated and found to have potential historic significance or has been designated as a historic resource. Planning staff can assist with this. 3. Zoning Requirements – See the reverse side of the sheet for setback, height, lot coverage, or other design requirements. 4. Permits Needed – If you are planning to do a second-story addition or second-story remodel that involves any exterior modifications, including decks, an Architectural Permit with the Planning Division will be required prior to submittal of a building permit application. Single-story additions that meet all zoning requirements will require a building permit only. Things to Know Fire Sprinklers – Fire sprinklers are required for any Parking That Doesn’t Meet Current Requirements new construction or demolition and reconstruction of Single family homes in a R Zoning District that do 1,000 square feet or more, excluding detached not comply with current parking requirements may garages. If the detached garage also has living space still be expanded provided that: adjacent or above, this entire square footage qualifies • Existing parking spaces are covered and legally towards the 1,000 square feet.
    [Show full text]
  • Information Needed for Shed Or Garage Permit Application
    INFORMATION NEEDED FOR SHED OR GARAGE PERMIT APPLICATION The following must be submitted to the Inspector for approval: ► A completed Building Permit Application. ► A detailed drawing/drawings of the structure, in 1/4” scale, including materials, dimensions and elevations. The maximum shed size is 250 sq. ft. No metal structures are allowed per the Design Standards. ► One of the following: • A current survey map showing lot lines and the proposed location of the shed (rear yard only) or garage, as well as all other structures on the property (pools, decks, etc.); or •An existing survey with the lot lines located and the proposed shed/garage shown; or •A drawing/plot plan for the property with the shed located. FEES: Shed permit fee: $55 up to 150 sq. ft. Sheds larger than 150 sq. ft. also require a $60 Plan Review fee. Garage permit fee: 30¢ per sq. ft., plus $60 Plan Review fee. Certificate of Occupancy: $50 Note: The approval process may take up to two weeks dependent on workload; however, information and plans/drawings must be complete for the review process to begin. Please provide a complete set of drawings/plans and all requested information with the Building Permit application. Failure to provide the required info will cause delays and possible rejection of permit application. Building Permits are valid for one year. Work must begin within 6 months of issuance of permit. Sussex Building Inspection Department Sussex Village Hall, N64 W23760 Main Street (262) 246-5212 rev. 7/16 INFORMATION NEEDED FOR SHED OR GARAGE PERMIT APPLICATION The following must be submitted to the Inspector for approval: ► A completed Building Permit Application.
    [Show full text]
  • Office in the Home Frequently Asked Questions
    Office in the Home Frequently Asked Questions [1] What are the requirements for deducting expenses for the business use of my home? [2] What does exclusive use mean? [3] Does my home office still qualify if my mother uses it once a year when she comes for a visit? [4] What does regular use mean? [5] Does my home office qualify if I don’t use it all year? [6] How do I meet the business use test? [7] How do I determine my principal place of business? [8] Can I claim a home office deduction if I work at both the job site and my home office? [9] What kind of expenses related to my home can I deduct? [10] Can I take a deduction for a garage I use to store my tools? [11] If I rent office space, can I still deduct the cost of a storage building on my property? [12] Can I take a deduction for my labor if I build my own home office? [13] How do I determine my business use percentage for my home office? [14] If I own my home, how do I depreciate my home office? [15] What happens if I claim depreciation for my home office and then later sell my home? [16] If I rent my home instead of owning it, can I deduct my rent payments? [17] If I rent an office space and also have a home office where I conduct all my managerial type activities, can I claim them both as a business deduction? [18] How do I deduct the office in the home expense on my return if I am self-employed? 1.
    [Show full text]
  • Toilet Facilities, Must the Toilet Rooms Be Available to the Public When the Building Or Space Is Not Open for Use? Answer: No
    Wisconsin Department of Safety and Professional Services Division of Industry Services 4822 Madison Yards Way Phone: 608-266-2112 PO Box 7302 Web: http://dsps.wi.gov Madison WI 53707-7302 Email: [email protected] Commercial Buildings Frequently Asked Questions SPS 362.1210, 362.2900, and 362.2902(6), IBC 2902.1, Table 2902.1, and 2902.3 In buildings or spaces that are required to be provided toilet facilities, must the toilet rooms be available to the public when the building or space is not open for use? Answer: No. Most buildings and spaces provide their services during their business hours or hours of operation and there is no requirement that the toilet rooms remain available to the public when the business is closed for the day. Not so obvious are those buildings or structures that provide some walk-in or drive-in services that are available 24/7 even though the rest of the building or space, including the toilets within, is closed to the public. The best example of this would be the service stations that include a convenience store that has toilet rooms that are open during the normal operating hours of the convenience store, but not at all times the gas pumps are available for use. (September 1, 2011) IBC 2902.1, Table 2902.1, 2902.3, and IBC Section 202 Are toilet rooms required for buildings or structures that are not designed to be normally occupied? Answer: No. Many buildings and structures are not designed as an “occupiable space” and accordingly need not include toilet rooms within them or adjacent to them.
    [Show full text]