DOCSLIB.ORG

USB 3.0 Boostlinq - 33Ft (10M) GUE310

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
USB 3.0 Boostlinq - 33Ft (10M) GUE310 USB 3.0 BoostLinq - 33ft (10m) GUE310 ● 33ft USB 3.0 Type-A male to Type-A female SuperSpeed extension cable ● Daisy chain up to 5 BoostLinqs to reach a maximum distance of 164ft* ● Built-in booster chipset amplifies USB 3.0 signals ● Up to 10x faster than USB 2.0 ● USB 3.0 transfer rates of up to 5Gbps ● Backwards compatible with USB 2.0 and 1.1 devices ● Plug & Play design-no drivers or power supply needed *Requires optional power supply The IOGEAR GUE310 USB 3.0 Booster Extension Cable uses active electronics to amplify the USB signal and maintain USB 3.0 SuperSpeed data transfers over extended distance, with no loss of data integrity or signal quality. The cable has male and female USB type "A" connectors. The USB "A" connector is the rectangular shaped plug found on PC's, hubs, and many other host interfaces. The IOGEAR USB 2.0 Booster Extension Cable extends from the host and provides another female "A" connector for longer distance USB needs. The cable is transparent to the host and the device and it is compatible with both PC and Mac computers, and is backwards compatible with USB 2.0 and 1.1 devices. It is ideal for applications that require distance between a user and the peripheral but still need the data transfer speeds of USB 3.0, such as webcams, hard drives, etc. The IOGEAR USB 2.0 Booster Extension Cable is Plug-and-Play, no additional drivers or complicated set up required. The IOGEAR GUE310 USB 3.0 Booster Extension Cable also gives you the ability to daisy-chain a maximum of five cables together in order to reach up to a total of 166 feet of USB 3.0 SuperSpeed connection. USB 3.0 BoostLinq - 33ft (10m) Product Requirements Package Contents ● Windows Vista®, Windows 7®, ● 1 x 3.0 BootLinq - 33ft (10m) cable Windows® 8/8.1 ● 1 x USB Type-A female to male ● Mac OS X 10.6 and above adapter ● Available USB 3.0 Port ● 1 x Quick Start Guide ● 1 x Warranty Card Specifications Function GUE310 Dimensions GUE310 USB Specification USB 3.0 compliant Unit Dimensions Width .87" (2.2 cm) Transfer Rate 5Gbps Height .5" (1.27 cm) Cable Length 33ft (10 meters) LEDs Depth Link 1 Length 33 ft (10 m) Cable Connections Inner Pack Input USB 3.0 A Female Width 8.3" (21.1 cm) Output USB 3.0 A Male Height 8.4" (21.3 cm) Operating Temperature 0 to 50 degrees (Celsius) Depth 9.6" (24.4 cm) Computer Connections Inner Pack Qty. 3 Daisy Chain or Cascading Up to 5 level daisy chain Unit Package Dimensions Max Output Power 5V/1.5A (with optional power supply) Width 9.1" (23.1 cm) Connectors Height 2.6" (6.6 cm) AC Power Inlets 5V/1.5A Depth 7.9" (20 cm) Operating System Support Windows XP/Vista/7/8/8.1 Master Carton Storage Temperature -40 to 55 degrees (Celsius) Width 10.2" (27.4 cm) Computer Interface USB Type A Height 9.9" (25.1 cm) Depth 17.1" (2.1 cm) Master Carton Qty. 12 Weight Master Carton Wt. 13.9 lb (6.3 kg) Inner Pack Wt. 6.35 lb (2.9 kg) Unit Pack Wt. 2 lb (.9 kg) Unit Wt. 1.75 lbs. (1.1 kg) www.IOGEAR.com 19641 Da Vinci, Foothill Ranch, CA 92610 GUE310 © 2014 IOGEAR® IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may appear in this document. .
Load more

Recommended publications
  • USB Software Package for Infiniivision X-Series Oscilloscopes
    USB Software Package for InfiniiVision X-Series Oscilloscopes The USB Software Package for Keysight’s InfiniiVision oscilloscopes enables USB 2.0 low-, full-, and hi-speed protocol triggering and decode, as well as USB PD (Power Delivery) trigger and decode. This package also enables other advanced analysis capabilities including USB 2.0 automated signal quality testing, jitter analysis, mask testing, and frequency response analysis (Bode plots) to help test and debug high-speed digital signals, such as USB 2.0. Find us at www.keysight.com Page 1 Table of Contents Introduction ................................................................................................................................................................ 3 Serial Trigger and Decode ......................................................................................................................................... 4 USB 2.0 Low- and Full-speed .................................................................................................................................... 4 USB 2.0 Hi Speed ...................................................................................................................................................... 6 USB PD (Power Delivery) .......................................................................................................................................... 7 Advanced Analysis ...................................................................................................................................................
    [Show full text]
  • 单端模拟输入/输出和 S/Pdif的立体声音频编解码器 查询样品: Pcm2906c
    PCM2906C www.ti.com.cn ZHCS074 –NOVEMBER 2011 具有USB 接口、单端模拟输入/输出和 S/PDIF的立体声音频编解码器 查询样品: PCM2906C 1特性 • 立体声 DAC: 上的模拟性能 234• 片载 USB 接口： – VBUS = 5V: – 具有全速收发器 – THD+N = 0.005% – 完全符合 USB 2.0 规范 – SNR = 96 dB – 由 USB-IF 认证 – 动态范围 = 93 dB – 用于回放的 USB 自适应模式 – 过采样数字滤波器： – 用于记录的 USB 异步模式 – 通频带纹波 = ±0.1 dB – 总线供电 – 阻带衰减 = –43 dB • 16 位 Δ-Σ ADC 和 DAC – 单端电压输出 • 采样速率： – 包含模拟 LPF – DAC: 32，44.1，48 kHz • 多功能： – ADC: – 人机接口 (HID) 功能： 8，11.025，16，22.05，32，44.1，48 kHz – 音量控制和静音 • 具有单个 12-MHz 时钟源的片载时钟发生器 – 终止标识功能 • S/PDIF 输入/输出 • 28-引脚 SSOP 封装 • 单电源： 应用 – 5 V 典型值 (VBUS) • 立体声 ADC: • USB 音频扬声器 • USB 耳机 – VBUS 时的模拟性能 = 5V: – THD+N = 0.01% • USB 显示器 – SNR = 89 dB • USB 音频接口盒 动态范围 – = 89 dB 说明 – 数字抽取滤波器： PCM2906C 是德州仪器的含有一个USB兼容全速协议 – 通频带纹波 = ±0.05 dB 控制器和S/PDIF的单片，USB，立体声编码器。 USB – 阻带衰减 = –65 dB 协议控制器无需软件编码。 PCM2906C 采用 SpAct™ – 单端电压输入 架构，这是 TI 用于从 USB 数据包数据恢复音频时钟 – 包含抗混淆滤波器 的独特系统。 采用SpAct 的片载模拟PLL支持具有低 – 包含数字 HPF 时钟抖动以及独立回放和录音采样率的回放和录音。 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2SpAct is a trademark of Texas Instruments. 3System Two, Audio Precision are trademarks of Audio Precision, Inc. 4All other trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Copyright © 2011, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not English Data Sheet: SBFS037 necessarily include testing of all parameters.
    [Show full text]
  • SCSI Standards and Technology Update © 2013 Storage Networking Industry Association
    SCSIPRESENTATION Standards TITLE and GOES Technology HERE Update Marty Czekalski President, SCSI Trade Association Interface and Emerging Architecture Program Manager - Seagate Technology SNIA Legal Notice The material contained in this tutorial is copyrighted by the SNIA unless otherwise noted. Member companies and individual members may use this material in presentations and literature under the following conditions: Any slide or slides used must be reproduced in their entirety without modification The SNIA must be acknowledged as the source of any material used in the body of any document containing material from these presentations. This presentation is a project of the SNIA Education Committee. Neither the author nor the presenter is an attorney and nothing in this presentation is intended to be, or should be construed as legal advice or an opinion of counsel. If you need legal advice or a legal opinion please contact your attorney. The information presented herein represents the author's personal opinion and current understanding of the relevant issues involved. The author, the presenter, and the SNIA do not assume any responsibility or liability for damages arising out of any reliance on or use of this information. NO WARRANTIES, EXPRESS OR IMPLIED. USE AT YOUR OWN RISK. 2 SCSI Standards and Technology Update © 2013 Storage Networking Industry Association. All Rights Reserved. 2 Abstract SCSI Standards and Technology Update SCSI continues to be the backbone of enterprise storage deployments and has rapidly evolved by adding new features, capabilities, and performance enhancements. This talk will include an up-to-the-minute recap of the latest additions to the SAS standard and roadmaps.
    [Show full text]
  • Funbox Classic (FBC)
    FunBox Classic (FBC) Group 14 Stephen Caskey (EE & CS) Anna Iskender (EE) Nick Johnson (EE) Kyle McCleary (EE & CS) Goals and Objectives u Accurately simulate old consoles u Rechargeable battery from USB u Emulate GB, GBC, GBA, NES, and SNES at native speed u Games upload through USB u Audio through speakers or headphones u Controller feels like a SNES controller u Sturdy housing u Built-in Bluetooth u Solar Charging u Battery Life Indicator Specifications Component Parameter Design Specificaon Screen Size Between 3.5" and 6" Screen Refresh Rate 50Hz (PAL) Bluetooth Version 4.0 LE or higher Storage Type MicroSD Size Minimum 16 GB Headphones Connector 3.5mm jack Speakers Power 1W Impedance Minimum 8 ohms Power Max Current Draw 700 mA Solar Charge Current Minimum 100 mA Charging Voltage 5V Baery Capacity Minimum 2100 mAh Discharge Time Minimum 2 hours Work Distribution Group Member Case Raspberry Pi PCB Bluetooth Solar Baery Power Audio Website Stephen Primary Secondary Secondary Secondary Kyle Secondary Primary Secondary Primary Nick Primary Primary Anna Primary Primary Primary Constraints u Economic constraints Ø Financing/shipping from ordering many individual components u Manufacturing constraints Ø Acquisition of needed parts and manufacturing supplies u Size constraints Ø Surface mounted components and case design parameters u Sustainable energy constraints Ø Power supply and battery charging challenges Standards Identification Standard Description Number SMPTE-170M-1990 Standard for analog television system color bar test system IEEE
    [Show full text]
  • S-Video/Composite to USB 2.0 SD Video Capture Device Cable - TWAIN Support - Analog to Digital Converter for Media Storage - Windows Only
    USB Video Capture Adapter Cable - S-Video/Composite to USB 2.0 SD Video Capture Device Cable - TWAIN Support - Analog to Digital Converter for Media Storage - Windows Only Product ID: SVID2USB232 This USB video capture adapter offers an easy to use analog video capture solution, enabling you to convert video (and accompanying audio) from a composite or S Video source to your Windows-based computer. An easy-to-use device for recording analog video to your PC from external sources, such as a VCR or camcorder, the S Video and composite to USB converter offers the perfect solution for Betamax or VHS video capture, with real-time MPEG-1, MPEG-2, and MPEG-4 encoding. This analog to digital video adapter is ideal for converting VHS or home movies to digital format, as well as importing videos onto your Windows computer for editing. It also features a snapshot function that enables users to capture still images from their analog video. This analog video capture cable delivers seamless analog video capture for your Windows devices. As well, the S Video / composite to USB adapter has TWAIN support, to ensure compatibility with a wide range of systems and software. This analog to digital converter cable connects to your PC through USB 2.0 and is compact enough to fit in the palm of your hand, providing a conveniently portable video capture solution that©s more than suitable for use with laptops and desktop computers alike. SVID2USB232 is backed by a StarTech.com 2-year warranty and free lifetime technical support. Note: This converter is for use with Windows-based devices only and is not compatible with macOS.
    [Show full text]
  • Development of a Multi-Bus Platform for Automation Testbed
    A Master Thesis Work in Electronics Development of a Multi‐bus platform for automation testbed By Lukas Knapik and Mathias Isaksson Examiner: Professor Lars Asplund, Mälardalens University Supervisor: Martin Ekström, PhD Student in Electronics, Mälardalen University Dan Olsson, M.SC Physics, Infotiv AB Lukas Knapik Mathias Isaksson 070‐7124691 073‐8079350 [email protected] [email protected] Mälardalen University, Västerås 2010‐02‐17 Development of a Multi‐bus platform for automation testbed Master Thesis CEL505 ABSTRACT The task for this thesis was to develop, construct and evaluate a multi‐bus communication system, connected to a PC via USB and capable of communicating in CAN, I2C and SPI and develop drivers for it in National Instruments LabVIEW. In the beginning a study was made of the communication buses followed by an investigation of what type of hardware that could accomplish this task. A microcontroller unit was selected and programmed in MikroElektronika MikroC Pro v.3.2 to act as the interface between the communication busses and PC. A PCB prototype of the system was constructed by using Eagle Cad software v.5.6.0. General drivers for this system where created in LabVIEW v.8.6.1 so the end‐user simply can create their own applications and control the compatible hardware depending on their type of purposes. The system was tested on criteria’s such as: speed, power consumption, burst performance and transmission length depending on which communication bus was used. Lukas Knapik, Mathias Isaksson Mälardalen University, Västerås 2010‐02‐17 Development of a Multi‐bus platform for automation testbed Master Thesis CEL505 ACKNOWLEDGEMENTS We would like to thank Infotiv AB for giving us the opportunity to do this thesis.
    [Show full text]
  • Blackhawkblackhawk™™ TALONTALON RTOSRTOS Forfor TITI Dsps
    BlackhawkBlackhawk™™ TALONTALON RTOSRTOS forfor TITI DSPs TI DSP platforms: C6000, C5400, C5500, C3x4x, C2000 The Blackhawk™ TALON™ OS is a POSIX-compliant real time operating system, the perfect software platform for designing and implementing application software for Texas Instruments TMS320 digital signal processors (DSP). Talon™ offers unsurpassed power and flexibility, providing the solu- Features tion for sophisticated high-performance application devel- opment. ƒ Royalty Free — Includes full source code On the surface you see a well-defined, documented and Optimized for each TI DSP family supported application programming interface (API) across ƒ all our supported platforms. But our performance is not ƒ Real-Time Multithreaded pre-emptive kernel compromised by porting from one architecture to another. Host to Target Communication Utilities Each kernel is optimized for each DSP platform to achieve ƒ the highest possible performance. ƒ Dynamic Shared Library Allocation POSIX ® is an IEEE Standard for Information Technology - ƒ Three completely configurable File Systems Portable Operating System Interface. This standard has pro- Small OS Footprint vided a stable framework for both operating system design- ƒ ers and application programmers. While the touch and feel ƒ Completely “Thread Safe” run-time libraries of the standard is UNIX-like, the POSIX interfaces are rigor- POSIX® Compliant ously defined, therefore ensuring predictable behavior of ƒ Board Support Packages Available compliant applications. There are many benefits to using ƒ standardized operating system interfaces. ƒ Affordable price · Well-defined and standardized operating system ser- vices provide for design of reliable and robust applica- tion software. System Requirements · Application compliance to POSIX ensures smooth soft- ware portability between hardware platforms.
    [Show full text]
  • USB-To-Serial Converter for IEI Access Systems
    USB-to-Serial Converter Installation Instructions USB-to-Serial Converter for IEI Access Systems Model # 0295097 Specifications/Requirements: Mechanical: Electrical: Form Factor: Single-Gang Plate Operating Voltage: 5V (USB Port Powered) Circuit Board Dimensions: 2.555” x 1.8” Current Draw: Normal: 26mA Mounts to single-gang Handy Box or Work Box USB Suspend Mode: less than 500µA Wire Specifications: Software: Refer to wiring sections See Below Environmental: PC Connections: Environment: For indoor use only. USB Port (v1.1 or v2.0) Temperature Tolerance: 32º F to 120º F (0º – 49ºC) Description The USB-to-Serial Converter is used to connect your PC to a HubMax II, Hub MiniMax II, Max 3, MiniMax 3or prox.pad Plus via the computer's USB port. The unit requires no hardware configuration and is ready to communicate to either type of device. Software Compatibility and Driver Installation The USB Converter is compatible with a USB port (v1.1 or v2.0) and works with any version of Hub Manager Professional. To use the USB device you must install the USB drivers. It is plug and play, so when you plug it in, your PC should recognize the new hardware and attempt to install the drivers. You can either tell Windows to search automatically or browse to the drivers yourself, which are located on the Hub Manager Professional Installation CD, version 7.1.4 (or higher) and copied onto the PC when you run the Hub Manager software installation. The driver locations on the PC are as follows: For Windows 98 and ME: C:\Program Files\IEI\HubManagerPro7\Program\Utilities\USB_Driver\FTDI_98-ME For Windows 2000, XP and Server 2003 International Electronics, Inc.
    [Show full text]
  • Esatap Back Plate Adapter
    eSATAp Back Plate Adapter User Manual English LINDY No. 70534, 70539 (2 Port) www.lindy.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (October 2009) User Manual Introduction English Thank you for purchasing the 12V enabled eSATAp Back Plate Adapter. This adapter combines a 5V & 12V Power-Over-eSATA port with a USB port. The 12V enabled eSATAp technology supports connection to 2.5” and 3.5” SATA drives without the need for a separate power adapter – the power can be driven from the 12V enabled eSATAp port using separately available 5 or 12V enabled eSATAp cables. Please note: when converting an internal SATA port from a motherboard, or add-on card, to an external eSATAp port, the 1m maximum cable length for internal SATA ports should be taken into account when calculating the total cable length (i.e. internal plus external eSATA cable). The power from the adapter’s USB/eSATAp port exceeds the 5V 500mA usually available from standard USB ports. The power is limited only by the computer’s ATX power supply connected to the adapter. This allows USB or eSATA 2.5” HDD enclosures to supply enough power to operate the hard drive over a single eSATAp connection. Einführung Deutsch Herzlichen Glückwunsch zum Erwerb dieses 12V eSATAp Slotblechadapters. Er stellt Ihnen eine kombinierten 12V und 5V Power-over-eSATA/USB Anschluss zur Verfügung. Er ermöglicht den sicheren Betrieb von 2,5“ und 3,5“ SATA Festplatten und Gehäusen über nur eine Kabelverbindung bei Verwendung der entsprechenden 5V oder 12V eSATAp Kabel. Bitte beachten Sie, dass bei Adaptierung eines internen Mainboard SATA Ports zu einem eSATA Port nach wie vor die maximale (Gesamt-)Kabellänge 1m nicht überschreiten soll! Aus dem eSATAp Anschluss können mehr als die üblichen 5V 500mA wie aus einem USB Port entnommen werden.
    [Show full text]
  • Usb 3.0 Connector
    INPUT/ OUTPUT CONNECTOR USB 3.0 CONNECTOR OVERVIEW USB 3.0 connector is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices. USB 3.0 connector features a new transfer mode SuperSpeed that can transfer data at up to 5Gb/s, which is more than ten times faster than the USB 2.0 standard. The USB 3.0 connector is backward compatible with USB 2.0 devices and cables. On each end of the USB 3.0 cable, FCI offers the Standard Type A and Type B receptacle and cable solutions in single-stacked positions. Additionally, Type A is also available in double- stacked positions. The USB 3.0 is available in vertical through- hole, right angle through-hole and upright through-hole options.. Originally designed to meet the standards for connection between computer peripherals to personal computers, the USB 3.0 now provides an alternative to delivering power to portable devices as well as replacing older interfaces such as serial and parallel ports. USB 3.0 connectors are ideal for applications in consumer, data, communications and industrial markets. FEATURES BENEFITS • Meets USB 3.0 specification • Mating interface follows USB 3.0 specification • Capable of transferring data up to 5Gb/s • Minimizes user waiting time • More than 10 times increase in performance • Provides higher speed and more efficient power management than USB 2.0 • Similar interface as USB 2.0 Type A & B connectors, with • Ensure maximum receptacle-to-PCB retention added pins for SuperSpeed USB signals • Full metal shielding
    [Show full text]
  • Delock 2.5 External Enclosure SATA HDD > Multiport USB 3.0 + Esatap
    Delock 2.5 External Enclosure SATA HDD > Multiport USB 3.0 + eSATAp (up to 15 mm HDD) Description This aluminium-enclosure by Delock enables you to install a 2.5 SATA HDD or SSD and provides up to 4 different connecting options due to its special Multiport USB 3.0 + eSATAp interface. The Multiport is a combination of eSATA and USB 3.0 interface, which supports a fast data transfer and a voltage supply of up to 5 V. For extra voltage supply, when connecting via eSATA, you will find an additional power cable included in delivery. The enclosure is especially suitable for different hard disk with a height up to 15 mm. Connecting options: 1. USB 3.0 (Power via USB) 2. USB 2.0 (Power via USB) 3. eSATAp (Power Over eSATA combo-connection eSATA+USB - eSATA for data and USB for power) 4. eSATA (eSATA for data and power via included USB power cable) Specification Item No. 42492 • External aluminium-enclosure for 2.5 SATA 1.5 Gb/s and 3 Gb/s HDD or SSD • Supports different hard disk height: 9 mm, 12.5 mm 14.5 mm or 15 mm • Connector EAN 4043619424924 external: 1 x Multiport USB 3.0 + eSATAp 1 x DC for power when connecting via eSATA Country of origin Taiwan, Republic Of internal: SATA 22 pin (data + power) China • Dimension DC connector: Length of pin: 9.5 mm ø 3.5 / 1.3 mm Polarity: ground outside, plus inside • Data transfer rate: 1. USB 3.0 up to 5 Gb/s 2.
    [Show full text]
  • Usb & Ieee 1394 Firewire
    USB & IEEE 1394 FIREWIRE ADAM TECHNOLOGIES UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE USB & FWC SERIES INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of body styles and sizes, positions and mounting orientations. Each is shielded for superior EMI/RFI protection and features spring contacts for exceptional connectivity properties. Specially designed shells with flares eliminate misconnection and kinked boardlocks add a strong, stable PCB attachment. An ideal solution for a low cost, high speed connection to peripheral devices. FEATURES: Industry Standard Compatible High Speed I/O applications Variety of Circuit sizes Variety of Body Styles Standard and Mini versions Shielded for EMI/RFI protection MATING CONNECTORS: Adam Tech USB and IEEE 1394 series connectors and all industry ORDERING INFORMATION standard USB and IEEE 1394 connectors. SPECIFICATIONS: USB A S RA Material: Insulator: PBT, Glass filled, rated UL94V-0 or Hi-Temp Nylon PA9T, rated UL94V-0 MOUNTING ANGLE Insulator Color: Black (White optional) SERIES INDICATOR RA =Right Angle, Contacts: Phosphor Bronze or Brass USB = Universal RU =Right Angle, Shell: Steel, nickel plated Serial Bus Upright MUSB = Mini USB Contact Plating: VT =Vertical Mount FWC = IEEE 1394, S =Wire Termination Gold Flash over nickel on mating area, Tin over Firewire (Plug Only) Copper underplate on tails MFW = Mini IEEE Electrical: 1394, Firewire Operating Voltage: 250V AC Current Rating: 1 Amps max. Contact Resistance: 30 mΩ max. Insulation Resistance: 100 MΩ min. PORTS Dielectric Withstanding Voltage: 250V AC for 1 minute S = Single port Mechanical: D= Dual port Insertion force: 3 oz max.
    [Show full text]