DOCSLIB.ORG

Facade Cladding System Solutions for Curtain Walls

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Facade Cladding System Solutions for Curtain Walls FACADE CLADDING System Solutions for Curtain Walls SYSTEM OVERVIEW Foreword If the best material curtails creativity, what good is it? If the best idea cannot be realized, what good is it? Materials that foster creativity and lend form to ideas are required for individual solu- tions, as are consulting services that take technical perfection, structural physics and aesthetics into consideration. RHEINZINK offers all of the above. Not only does the name stand for unique creative material to clad roofs and fa- cades, but also for exemplary service to implement your ideas – regardless of the size of your project – big or small. We offer solutions that are as unique as your project. A comprehensive range of RHEINZINK roofing and facade prod- ucts along with diverse installation tech- niques, make it easy to find a perfect solution for every design. RHEINZINK is extremely malleable; it is compatible with every architectural envi- ronment and its aesthetic is timeless. Fur- thermore, requirements for sustainable building using natural material are met without difficulty. Its lifetime comprises several generations and that, in and of itself, sets standards; its ecological bal- ance is exemplary. The examples in this brochure illustrate the design potential of RHEINZINK, along with various options available to you by using this ecological material. Datteln, January 2013 Terrace-shaped building, Oswaldgasse, Vienna, Austria TRUMPF Sachsen GmbH, Neukirch, Germany New Lecture Hall, Victoria University, Werribee Campus, Werribee, Australia RHEINZINK-Flat-Lock Tiles Flat-lock tiles are used primarily for large ■ Individual tile sizes curtain wall areas. This is where the visual ■ High degree of design freedom effect is the most impressive. By using dif- ■ Environmentally friendly declared ferent sizes of tiles and by changing up product the layout of the seam lines, the planner has many options for facade designs. For quality assurance and optimal material usage efficiency custom production is recommended. 4|5 Head Offices of Berlinwasser Holding AG, Berlin, Germany Olympic Stadium, Jinan, China Sir Colin Campbell Building, University of Nottingham, Great Britain RHEINZINK-Small Tiles Square and diamond-shaped tiles make ■ Diamond shaped or square tiles up RHEINZINK’s small tile group. Con- available in various sizes trary to sheets or shingles, these tiles have ■ Flexible adaptation to building forward facing edges on the top surface shapes and backward facing edges on the low- ■ Durable and environmentally er surface to form simple lock joints. The friendly declared product small format of these tiles permits secure and aesthetically pleasing solutions to be realized, particularly for geometrically complicated buildings. Virtually all cor- ners and curves can be accommodated. Dormer, chimney head and roof edges are some of the more conventional ap- plications for small tiles. Perth Convention & Exhibition Centre, Perth, Australia Zinkhaus, Copenhagen, Denmark Villa, Prague, Czech Republic RHEINZINK-Seam Technology RHEINZINK-seam systems join indi- ■ Suitable for almost every building vidual panels longitudinally. The angled shape or style standing seam is used primarily for cur- ■ In conventional vertical, diagonal or tain walls. Its distinguishing feature is the horizontal application bold accentuation of its seams (ca. 12 ■ A variety of panel widths available mm width). A variety of panel lengths ■ Environmetally friendly declared and widths, allows even the most elabo- product rate shapes to be realized using seam technology. The availability of machines guarantees efficient and consistent forming of panel edges and closing of seams. 6|7 Private Residence, Empel, Netherlands Train Station Passageway, Uster, Switzerland MG AVU Galerie der modernen Kunst Akademie bildender Kunst, Prague, Czech Republic RHEINZINK-Shiplap Panel Due to its layered characteristics and ■ Layered sheath look shadowless joint, the shiplap panel is ■ A variety of panel widths available a particularly unique facade cladding, ■ Environmentally friendly declared reminiscent of wooden facades. When product exposed to light and shade, interesting shadows and sharp contours appear because of its profile geometry. Precision profile manufacturing (in accordance with detailed planning and pre-defined panel dimensions) guarantees efficient and optimum installation on site. Theater am Marientor (previously: Les Misérables), Duisburg, Germany University of Nottingham, Business School, Nottingham, Great Britain Tropical Islands, Briesen-Brand, Germany RHEINZINK-Reveal Panels The benefit of the reveal panel is the ■ A panel system with different choice of bay widths (200 - 333 mm) visual effects and variable joint widths of 0 - 30 mm. ■ Choice of reveal and panel widths With the flexibility of vertical and diago- ■ Environmentally friendly declared nal installation, the reveal panel offers the product architect an exceptional amount of free- dom in implementing their design ideas. Configured panels with an extremely wide range of shapes can be realized. Therefore, permanent quality solutions can be implemented very quickly when it comes to renovations or retrofitting in- sulation. 8|9 Multisport Complex, Walferdange, Luxembourg Private Residence, Berlin, Germany Private Residence, Datteln, Germany RHEINZINK-Corrugated Profiles The fluid design of the conventional sine ■ Flexible application as a result wave gives the corrugated profile a fili- of large formats greed look. Various types of installation ■ Accentuated facade design – horizontal, vertical or diagonal – per- ■ Diverse corrugated formats upon mit detailed panelization or clearly vis- request ible segmentation of the facade image, ■ Environmentally friendly declared panel by panel. The soft interplay of light product and shadow creates a vitality on these large surfaces that is both aesthetically interesting and appealing. The Material with a Future. since the consumption of energy in the a natural patina. With the pre-weathered recycling, amounts to only 5% of the pri- variants, the natural material of prePATI- In the context of the discussion on sus- mary energy content. The decision to use NA blue-grey and prePATINA graphite- tainability, the environmental compatibil- RHEINZINK is also a great benefit to fu- grey, have from the beginning a typical ity of building products is being given ture generations. Thanks to the recycling zinc, blue-grey and graphite-grey ap- greater significance, and accordingly rate of 95%, a further reduction of the pearance. This product line with its pre- influences the decision making, in the se- energy requirement is achieved in the weathered variants will age over time. lection of materials, by the owners of manufacturing process, as production The blue-grey and graphite-grey ap- buildings and planners. Focus is also scrap is passed back to the melting pro- pearance of the RHEINZINK-PROTECT given to the important consideration of cess, without further pre-handling. LINE is however protected from aging, in the expenditure of energy consumption, the longer term, by a transparent protec- during the manufac turing of the material, In addition to exemplary ecological cha- tion coating and additional energy saving is achieved racteristics RHEINZINK‘s aesthetic ap- by the high recycling rate. pearance is architecturally convincing. It RHEINZINK – COLOR LINE, with its col- can be delivered in various product lines oured RHEINZINK variants, offers ad- RHEINZINK’s environmental compatibi- and versions. ditional design possibilities for roofing, lity has high value. Ecological yardsticks facade cladding and architectural detail- have been set for the extraction and pro- ing. Currently it is available for delivery cessing of the raw material. The con- in the colours RHEINZINK-blue, RHEIN- sumption of energy is extremely low and ZINK-tile-red, RHEINZINK-moss-green, our modern production facilities reduce RHEINZINK-pearl-gold and RHEIN- emissions to a minimum. RHEINZINK is ZINK-nut-brown. RHEINZINK – COLOR 100% recyclable and its use over many RHEINZINK-PATINA is the classic line. LINE retains the metal’s outstanding decades is the yardstick of its strength. Its The bright rolled version (prePATINA processing characteristics. use as a roof covering, facade cladding bright rolled), in the course of time due to and roof drainage, is given high value, atmospheric influences, takes the form of Internationale Gesellschaft für Elektrosmog-Forschung IGEF Ltd. International Association for Electrosmog-Research IGEF Ltd. IGEF Certi cation Centre 1 TÜV QUALITY ZINC Certificate CERTIFICATE CERTIFICATION The results of the biophysical analysis carried out by the IGEF testing and research laboratory 2 TÜV Certificate show that up to 99.93 % of the low-frequency alternating electric elds and the high- frequency electromagnetic radiation from outside of the building are shielded by the The Institute Construction and Environment (Institut Bauen und Umwelt e.V.) and its members are committed towards sustainable building. Joint projects focus on analysing the ecological performance RHEINZINK-Roof and - Facade System made of Titanium Zinc of building products across their entire life cycle and on the basis of scientifi c principles. Transparent disclosure of all information including a full life cycle assessment (LCA) is performed on the basis of internationally ISO 9001:2008, and produced by the company RHEINZINK GmbH & Co. KG. agreed standards such as ISO 14025, ISO 21930 and EN 15804. Thus, the requirements
Load more

Recommended publications
  • Constructional Design of Curtain Wall Façade Inspired by “Hydraulics” Science
    The Turkish Online Journal of Design, Art and Communication - TOJDAC April 2016 Special Edition CONSTRUCTIONAL DESIGN OF CURTAIN WALL FAÇADE INSPIRED BY “HYDRAULICS” SCIENCE Asem Sharbaf Department of Architecture, Iran university of Scince & Technology [email protected] Mitra Sharbaf Department of Architecture, Islamic Azad University of Tabriz [email protected] Ghasem Sharbaf Department of civil engineering, University of Hormozgan [email protected] ABSTRACT In recent years, the facade construction has been changed a lot. The use of curtain wall facades is the best solution to Supply the demands of the building engineering group. The curtain wall Facade has a capability to supply the expectations of the facade. There are large spectrums of construction system for curtain wall Facades that mainly concerned with the quality of their functions. Besides, we are able to mention the common points that can be seen among the facades such as: integration, lightness and particularly their transparency. The cable net façade is a new generation of Curtain wall Façade, having been previously used as a cable net structure to cover vast areas. According to the overall structure of the cable net Facade, there is a possibility that can be increased integration of façade. On the other, by increasing the façade’s area, other destructive factors such as vibration and large displacement are involved in the facade design. Many solutions have been proposed to eliminate these factors, mainly affecting the transparency of the facade. In this article, we are trying to offer a mention called ''hydraulics science'' as an appropriate solution. ''Damper'' is just one of their applications in the construction industry that is mainly used in the issue related to earthquake.
    [Show full text]
  • Reducing the Carbon Footprint of the Bucharest University of Economic Studies Through Green Facades in an Economically Efficient Manner
    sustainability Article Reducing the Carbon Footprint of the Bucharest University of Economic Studies through Green Facades in an Economically Efficient Manner Simona Roxana Pătărlăgeanu 1, Costel Negrei 1, Mihai Dinu 1,* and Roxana Chiocaru 2 1 The Faculty of Agrifood and Environmental Economics, The Department of Agrifood and Environmental Economics, Bucharest University of Economic Studies, 5-7 Mihail Moxa Street, District 1, 010961 Bucharest, Romania; [email protected] (S.R.P.); [email protected] (C.N.) 2 The Faculty of Biology, The Department of Systems Ecology and Sustainability, University of Bucharest, Splaiul Independent, ei Street, 91-95, 050095 Bucharest, Romania; [email protected] * Correspondence: [email protected] Received: 7 March 2020; Accepted: 29 April 2020; Published: 6 May 2020 Abstract: This paper focuses on the current environmental issues, more specifically the amount of greenhouse gases humanity is being confronted with at the moment. The research was carried out on a niche of the topic, namely on the carbon footprint of public buildings. The concept of a sustainable university is new and insufficiently explored, and as part of the environmental metabolism, it influences anthropic sustainability in a directly proportional manner. This indicator’s monitoring systems reveal how vulnerable humanity is in front of the latency of an unprecedented and inevitable environmental catastrophe. The ecological effects may be mitigated by the academic community through green urban design. The ecological performance can be expressed in an economically efficient manner, which can, at the same time, create a precious channel of communication within the entire academic community though volunteering for sustainability.
    [Show full text]
  • Optimizing the Architectural Layouts of Curtain Walls to Minimize Use of Aluminium
    Optimizing the Architectural Layouts of Curtain Walls to Minimize Use of Aluminium Adam D. Leea,b,∗, Paul Shepherda, Mark C. Everndena, David Metcalfec aDepartment of Architecture and Civil Engineering, University of Bath, Claverton Down, Bath, BA2 7AY, U.K. bPTCC Facade Design, Telecom Plaza, 316 Senator Gil Puyat Ave., Makati City, Metro Manila, 1200, Philippines. cCentre for Window and Cladding Technology (CWCT), The Studio, Entry Hill, Bath, BA2 5LY, U.K. Abstract During recent decades it has become common to enclose large buildings with lightweight, weathertight walls that hang, like curtains, from the floor edges. The frames of these curtain walls are, usually, extruded aluminium { a material whose production is highly energy-intensive. Although means of enhancing the thermal performance of building envelopes have been scrutinized, comparatively little attention has been given to the cost and embodied energy savings that can be achieved through efficient structural design. No guidelines for efficient use of aluminium in a curtain wall have been published, and architects therefore have not known the impact that their decisions have upon the facade's material content. In this study more than 1,000 unique curtain wall systems have been opti- mized numerically, each one to a different set of design criteria, and the results show the extent to which aluminium content is influenced by floor height, lo- cations of supports, number of horizontal members per panel, width of the extrusions, spacing between mullions, design wind pressure, and the minimum allowable thickness of aluminium. The conditions in which the amount of metal ∗Corresponding Author Email addresses: [email protected] (Adam D.
    [Show full text]
  • Applying Double Skin Façade with ETFE Membrane
    Journal of Civil Engineering and Architecture 13 (2019) 178-185 D doi: 10.17265/1934-7359/2019.03.002 DAVID PUBLISHING Applying Double Skin Façade with ETFE Membrane Assembly for Energy Saving and Acoustic Protection for the Building of the Czech Institute of Informatics, Robotics and Cybernetics in Prague Petr Franta1, 2 1. Architects & Assoc., Ltd., Prague, Czech Republic 2. Czech Institute of Informatics, Robotics and Cybernetics—Czech Technical University, Prague, Czech Republic Abstract: Multidisciplinary, integrated planning approach by architects, engineers, scientists and manufacturers to reduce energy consumption of buildings. The CIIRC Complex, located on the main campus of Czech Technical University in Prague consists of two buildings, newly constructed building and adaptive reuse of existing building. CIIRC—Czech Institute of Informatics, Robotics and Cybernetics is a contemporary teaching facility of new generation and use for scientific research teams. New building has ten above-ground floors, on the bottom 4 floors of laboratories, scientist modules, classrooms, above are offices, meeting rooms, teaching and research modules for professors and students. Offices of the rector are on the last two floors of the building. On the top floor is congress type auditorium, in the basement is fully automatic car park. Double skin pneumatic cushions façade. In the project are introduced series of architectural and technical features and innovations. Probably the most visible is the double skin façade facing south-transparent double layer membrane ETFE (Ethylen-TetraFluorEthylen) cushions with triple glazed modular system assembly. Acting as solar collector, recuperating of hot air on the top floors, saving up to 30% of an energy consumption.
    [Show full text]
  • Double Skin Façades for Office Buildings
    Double Skin Façades for Office Buildings Literature Review Harris Poirazis Division of Energy and Building Design Department of Construction and Architecture Lund Institute of Technology Lund University, 2004 Report EBD-R--04/3 Lund University Lund University, with eight faculties and a number of research centres and specialized institutes, is the largest establishment for research and higher education in Scandinavia. The main part of the University is situ- ated in the small city of Lund which has about 101 000 inhabitants. A number of departments for research and education are, however, located in Malmö. Lund University was founded in 1666 and has today a total staff of 5 530 employees and 34 000 students attending 60 degree pro- grammes and 850 subject courses offered by 89 departments. Department of Construction and Architecture The Department of Construction & Architecture is part of Lund Insti- tute of Technology, the technical faculty of Lund University. The main mission of the Department of Construction & Architecture is to pursue research and education on topics related to the built environment. Some of the topics of interest are: restoration and maintenance of buildings, construction management, design processes, construction, energy effi- ciency, climatization and design of ventilation and heating systems, demo- lition, disposal and re-use of building materials. These topics are treated from both a Swedish and an international perspective and collaboration between actors from mutidisciplinary fields of competence forms a particularly important aspect of research and edu- cation at the Department. The Department is divided into 6 sub-depart- ments or divisions: Architectural Conservation & Restoration, Building Services, Computer Aided Architectural Design, Construction Manage- ment, Energy & Building Design, and Housing Development & Man- agement.
    [Show full text]
  • Accommodating Movement in Building Envelope Materials
    I S S U E 4/2017 VOLUME 34 NUMBER 4 Journal of architectural technology published by Hoffmann Architects, Inc., specialists in the rehabilitation of building exteriors. Accommodating Movement in Building Envelope Materials Richard P. Kadlubowski, AIA and Christopher M. DeRosa, AIA, PE W e may think of the building are anticipated, the design should ac- envelope as an inanimate object, but, commodate each material’s propensity really, its components can be quite for expansion and contraction, and the mobile. Building materials grow, shrink, building enclosure must allow for dif- shift, bulge, deform, and elongate in fering – and, often, opposing – move- response to stresses and fluctuations ment of adjoining materials. in the environment, and these dimen- Calculations and detailing for seem- sional changes often impose strain on ingly small movements in the building adjacent elements. envelope may seem cumbersome and Where the forces of movement are time-consuming, however the forces not foreseen during design and con- that develop from these deformations struction, evidence of the struggle will can be immense. Neglecting to include emerge, in the form of cracks, spalls, adequate expansion joints, control displacement, broken glass, warped joints, bond breaks, flexible anchorage, metal, and, eventually, breakdown of slip planes, and other means to allow the assembly. for changes in dimension will ultimate- Failure to anticipate and allow for ly expend more time and money in movement in building materials com- remediation than a prudent approach pels imparted stresses to find their would require at the outset. Where own path to release, which is nearly al- a building owner is faced with the ways an undesirable one.
    [Show full text]
  • Journal of Medieval Art and Architecture
    Peregrinations: Journal of Medieval Art and Architecture Volume 4 Issue 3 2014 Peregrinations: Journal of Medieval Art and Architecture (Volume 4, Issue 3) Follow this and additional works at: https://digital.kenyon.edu/perejournal Part of the Ancient, Medieval, Renaissance and Baroque Art and Architecture Commons Recommended Citation . "Peregrinations: Journal of Medieval Art and Architecture (Volume 4, Issue 3)." Peregrinations: Journal of Medieval Art and Architecture 4, 3 (2014). https://digital.kenyon.edu/perejournal/vol4/iss3/15 This Full Issue is brought to you for free and open access by the Art History at Digital Kenyon: Research, Scholarship, and Creative Exchange. It has been accepted for inclusion in Peregrinations: Journal of Medieval Art and Architecture by an authorized editor of Digital Kenyon: Research, Scholarship, and Creative Exchange. For more information, please contact [email protected]. et al. Welcome Welcome to the Spring 2014 issue of Peregrinations: Journal of Medieval Art & Architecture. It is with great Current Issue pleasure that we present an issue that goes back to our Photo­bank roots with a focus on pilgrimage and pilgrimage art. Roger E. Reynolds presents “A Precious Ancient Submission Souvenir Given to the First Pilgrim to Santiago de Guidelines Compostela” which examines Bishop Godescalc’s visit and how it impacted the manuscripts at Albelda in a very Organizations personal way. John K. Moore, Jr. also brings new critical attention to the imposing sculpture of St. James as a Exhibitions pilgrim in “Santiago’s
    [Show full text]
  • Delirious Facade
    BLACK BOX: Articulating Architecture’s Core in the Post-Digital Era 1 DELIRIOUS FACADE WEI-HAN VIVIAN LEE JAMES MACGILLIVRAY University of Toronto that had developed earlier in the composition of the plan and section. The generative nature of this relationship between This paper looks at a recent developments in digital knowledge and design towards what the authors interior and exterior, coupled with the relative stability of call “raster” based surfaces and away from “vector” lineaments. The authors present this turn in ornamental and formal languages meant that facade com- relation to the historical context of facade composition, drawing an analogy between the beaux-arts position was circumscribed. understanding of facades as a consequence of plan and section and the auditable and verifiable scripts of parametric design. In contrast to the vector, the authors present contemporary developments Yet, with the advent of reinforced concrete and the cantile- in machine learning and perception that privilege an interaction with the world based on surfaces vered floor slab, the causal connection between the facade and pixels. Lastly they present the potential for the raster digital as a design tool, using artificial and the elevation was largely severed. There are other exam- intelligence to synthesize hybrid facade designs in a digital dream state. ples, but Le Corbusier’s free facade is the most emblematic.5 The free facade instigated a crisis in what had otherwise BACKGROUND been a logical conclusion to the procedure of architectural Forest and city are two things essentially deep, and depth composition. Indeed counter to the easy sounding name, the is fatally condemned to become a surface if it wants to free facade actually requires more compositional work; Le be visible… The part of the forest immediately before Corbusier’s invention of the concept of “regulating lines” and us is a screen as it were, behind which the rest of it lies his use of the facade diagram in Towards a New Architecture hidden and aloof.
    [Show full text]
  • Design of Integral Concrete Facade Assisted by Numerical Simulation
    DESIGN OF INTEGRAL CONCRETE FACADE ASSISTED BY NUMERICAL SIMULATION Vladimir Cervenka 1, Josef Taferner, Matthias Gander, Konrad Bergmeister 2 1Cervenka Consulting, Prague, CZECH REPUBLIC 2 Ingenieur Team Bergmeister, Brixen, ITALY e-mail: [email protected] , [email protected] SUMMARY Design of façade of the school building in Laimburg, Bozen in northern Italy was based on an integral concept without expansion joints. Outer layer made of architectural reinforced concrete was verified for limitation of crack widths due to shrinkage and temperature. The analysis model was based on the finite element method and fracture mechanics. The method allowed optimization of façade reinforcement and its fastening to the base bearing substructure. Keywords : Facade, crack width, fracture mechanics, temperature, shrinkage 1. INTRODUCTION Design of building facades are often based on sandwich systems, where each layer is determined for a specific function. The inner reinforced concrete layer serves to bearing capacity, the intermediate layer provides a thermal insulation and the outer layer serves to an architectural design. An obvious major function of the outer layer is its architectural role. In addition it represents a shield of the building, which must resist to environmental actions of sun radiation, atmospheric conditions, wind, rain, etc. Due to the high intensity of these actions the surface layer is often composed of panels separated by expansion joints allowing movements imposed by the environment. However, the architectural design may require a continuous construction of the outer layer. Such a solution, which is referred here as “integral façade”, eliminates the problems related to expansion joints (leakage, stress-induced dalamination of layers near joints, etc.).
    [Show full text]
  • Facade Refurbishment – Improving the Energy Performance of the Existing Building Stock in Belgrade
    Facade Refurbishment – Improving the Energy Performance of the Existing Building Stock in Belgrade Natasa Cukovic-Ignjatovic and Dusan Ignjatovic Faculty of Architecture, University of Belgrade, Belgrade, Serbia and Montenegro ABSTRACT: Urban tissue of Belgrade comprises rather large building stock, mainly dwellings with poor performance regarding energy and some aspects of human comfort. This paper is trying to identify the most efficient strategy for improving the energy balance citywise by focusing on specific building types that are the most suitable for energy rehabilitation. Certain interventions that are most likely to occur in present conditions are analysed and compared. Conference Topic: 6 Recycled architecture (re-use, upgrading and rehabilitation of buildings) Keywords: facade, energy, modification INTRODUCTION erection and milestone years that significantly influenced the building practice in Belgrade. Urban tissue of Belgrade comprises rather large 2.1 Buildings Dated Before 1941. building stock, mainly dwellings with poor Some 15% of present building stock1 was performance regarding energy and some aspects of constructed before World War II and it could not be human comfort. Throughout last 50-60 years, the considered as representative for numerous reasons permanent migrations caused constant demand for such as: housing that has significantly shaped the present rather modest number of apartments image of the city. This paper tends to identify the great variety of building types most commonly encountered problems that can be many of these buildings are important part of solved, emphasizing the building types that were architectural and cultural heritage and their repeatedly used. The idea is to propose some refurbishment demands specific and more guidelines for interventions on the envelopes of these complex approach buildings.
    [Show full text]
  • When Santiago De Compostela and Mondoñedo Were Built in Wood: Half Timber with Earth Constructions in the Cities of Galicia
    The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XLIV-M-1-2020, 2020 HERITAGE2020 (3DPast | RISK-Terra) International Conference, 9–12 September 2020, Valencia, Spain WHEN SANTIAGO DE COMPOSTELA AND MONDOÑEDO WERE BUILT IN WOOD: HALF TIMBER WITH EARTH CONSTRUCTIONS IN THE CITIES OF GALICIA. A. Fernández Palicio 1, * 1 SeteOitavas Sociedade Cooperativa Galega. Vigo, Galicia 36202 - [email protected] Laboratorio de Tecnoloxías Apropiadas Vigo, Galicia 36202 - [email protected] Commission II - WG II/8 KEY WORDS: Half-timber with earth, Galicia, earth construction, Middle Age, urban architecture ABSTRACT: Nowadays, more common traditional constructions in Galician historical cities are houses with stone walls and wood slabs. However, Galician medieval cities were built with half timbers with earth and bricks used as structural closures and recovered interiorly with mud and lime mortars. At that time, Santiago de Compostela and Mondoñedo were two cities built in wood, not in stone and these half timbers were the most widespread technique in these cities until the XVIII and XIX. Only a few examples can be seen at present. These constructions are on the brink of disappearance due to three main factors: the lack of general public knowledge, the lack of Government protection and, finally, the lack of building professional training in the aforementioned techniques. 1. INTRODUCTION Finally, we have verified that a large part of the already scarce heritage that was left standing was destroyed in the last two decades 1.1 About this research without being documented by technical services that carried out the works, which makes it more necessary an urgent this research.
    [Show full text]
  • Impacts of Traditional Architecture on the Use of Wood As an Element of Facade Covering in Serbian Contemporary Architecture
    SPATIUM International Review UDC 728.012.6:691.11 ; No. 24, March 2011, pp. 57-62 692.23.011.1 Preliminary report-Short Communications DOI: 10.2298/SPAT1124057I IMPACTS OF TRADITIONAL ARCHITECTURE ON THE USE OF WOOD AS AN ELEMENT OF FACADE COVERING IN SERBIAN CONTEMPORARY ARCHITECTURE Jelena Ivanović Šekularac1, University of Belgrade, Faculty of Architecture, Belgrade, Serbia Nenad Šekularac, University of Belgrade, Faculty of Architecture, Belgrade, Serbia The world trend of re-use of wood and wood products as materials for construction and covering of architectural structures is present not only because of the need to meet the aesthetic, artistic and formal requirements or to seek inspiration in the return to the tradition and nature, but also because of its ecological, economic and energetic feasibility. Furthermore, the use of wood fits into contemporary trends of sustainable development and application of modern technical and technological solutions in the production of materials, in order to maintain a connection to nature, environment and tradition. In this study the author focuses on wood and wood products as an element of facade covering on buildings in our country, in order to extend knowledge about possibilities and limitations of their use and create a base for their greater and correct application. The subject of this research is to examine the application of wood and wood products as an element covering the exterior in combination with other materials applied in our traditional and contemporary homes with the emphasis on functional, representational art and the various possibilities of wood. In this study all the factors that affect the application of wood and wood products have been analyzed and the conclusions have been drawn about the manner of their implementation and the types of wood and wood products protection.
    [Show full text]