Common Tasks

• Browser Settings for Internet Explorer, on page 1 • Browser Settings for Firefox, on page 2 • Sign In to Finesse Desktop, on page 3 • Accept Security Certificates, on page 5 • Accept Certificates for Live Data Gadget, on page 7 • Accept Certificates for Multi-session Chat and Email, on page 8 • Sign Out of the Finesse Desktop, on page 9 • Live Data Reports, on page 9 • View My History, on page 10 • View Context Service Data, on page 11 Browser Settings for Internet Explorer If Internet Explorer is used to access the Finesse desktop, certain settings must be configured in the browser to ensure all features of Finesse work properly. 1. Disable pop-up blockers. Finesse does not support Compatibility View. When the desktop is running in Compatibility View, Internet Explorer renders in the standard mode for that version. 2. Configure the following privacy and advanced settings: 1. From the browser menu, select Tools > Internet Options. 2. Click the Privacy tab. 3. Click Sites. 4. In the Address of website box, enter the domain name for the Side A Finesse server. 5. Click Allow. 6. In the Address of website box, enter the domain name for the Side B Finesse server. 7. Click Allow. 8. Click OK.

Common Tasks 1 Common Tasks Browser Settings for Firefox

3. You must enable the following security settings to allow users to sign in: • Run ActiveX controls and plug-ins • Script ActiveX controls marked as safe for scripting • Active scripting

To enable these settings: 1. From the Internet Explorer browser menu, select Tools > Internet Options. 2. Click the Security tab. 3. Click Custom level. 4. Under ActiveX controls and plug-ins, select Enable for Run ActiveX controls and plug-ins and Script ActiveX controls marked safe for scripting. 5. Under Scripting, select Enable for Active Scripting.

Note If the customer is using self-signed CA (Certificate Authority) and their agents use the server's FQDN, there should not be any certificate errors or warnings when connecting to Finesse over HTTPS.

Browser Settings for Firefox Complete the following steps to ensure Finesse behaves as expected when it is not the active window.

Procedure

Step 1 Open Firefox and enter about:config in the address bar. A warning page appears that states, This might void your warranty!. Step 2 Click I'll be careful, I promise!. Step 3 In the Search field, enter dom.disable_window_flip. Step 4 Double-click dom.disable_window_flip to set the value to false. Step 5 Restart Firefox.

Common Tasks 2 Common Tasks Sign In to Finesse Desktop

Note Extension Mobility brings a user-specific phone profile (including configured extensions for that user) to the phone being logged in from. After logging in to Cisco Unified Communications Manager with Extension Mobility, agents can log in to Unified CCX using Finesse. If you log in to any other Extension Mobility device when you are still logged in to one Extension Mobility device and Finesse Desktop, you are automatically logged off from the first Extension Mobility device. However, you have to log out and log in again to Finesse Desktop.

Procedure

Step 1 Enter the following URL in the address bar of your browser: https://FQDN:portnumber/desktop/ where FQDN is the fully qualified domain name of your primary server.

Step 2 If your contact center has installed a language pack for Finesse, a language selector appears on the desktop. From the language selector drop-down list, select the language that you want to appear on the desktop. Note You can also select a language by passing the locale as part of the URL (for example, http://FQDN of Finesse server/desktop?locale=fr_FR) or by changing your browser preferred language. The default language is English (en_US). If your contact center does not have a language pack installed for Finesse, the desktop locale is English only.

Step 3 In the Username field, enter your agent ID or username. Note Agent IDs are case-sensitive and can contain letters, numbers, hyphens (-), underscores (_), and periods (.). Agent IDs are assigned to you by your administrator. Agent IDs cannot begin or end with a period or contain two periods in a row. Finesse agent usernames are restricted to 7-bit printable ASCII characters (any of the 94 characters with the numeric values from 33 to 126). The supported characters are: A-Z and 0-9, ,, -, !, ~, `, $, ^, &, (, ), ", ', {, }, @,..They do not support the following characters, /, \, [, ], :, ;, |, =, ,, +, *, ?, <, >.

Step 4 In the Password field, enter your password. Step 5 In the Extension field, enter the extension of your phone. Step 6 Click Sign In. You are signed in to the Finesse desktop. Your role (agent or supervisor), agent name, agent ID, and extension appear in the header. Your status is set to Not Ready.

Common Tasks 3 Common Tasks Sign In to Finesse Desktop Single Sign-On Mode

Note On first login, you are prompted to set your preference for notifications. Choose the option to always receive or allow toaster notifications. Note that toaster notifications will not appear if your browser is set to private mode i.e New incognito window in Chrome or New private window in Firefox.

Procedure

Step 1 Enter the following URL in the address bar of your browser: https://FQDN:portnumber/desktop/ where FQDN is the fully qualified domain name of your primary server.

Step 3 On the login page, enter your Username. Step 4 In the Password field, enter your password and click Sign-In. Step 5 The Finesse landing page is displayed, In the Extension field, enter the extension of your phone. Step 6 Click Submit. You are signed in to the Finesse desktop. Your role (agent or supervisor), agent name, agent ID, and extension appear in the header. Your status is set to Not Ready. Note On first login, you are prompted to set your preference for notifications. Choose the option to always receive or allow toaster notifications. Note that toaster notifications will not appear if your browser is set to private mode i.e New incognito window in Chrome or New private window in Firefox.

Account Locked After Five Failed Sign In Attempts If you try to sign in to Finesse with the wrong password five times in a row, Finesse blocks access to your account for 5 minutes. For security reasons, if you try to sign in again during that time, Finesse does not alert you that your account is locked. You must wait 5 minutes and try again. Do not attempt to sign in again when your account is locked, otherwise the lockout timer resets, and you must wait an additional 5 minutes. This restriction applies regardless of how you sign in, be it on the desktop or using the Finesse IP Phone Agent (IPPA).

Common Tasks 4 Common Tasks Accept Security Certificates

Accept Security Certificates The first time you sign in to the Finesse desktop, you may be prompted to accept security certificates before you can continue. Unless the certificates are deleted, you should only need to accept them once. These certificates allow the Finesse desktop to communicate over a secure connection to the Finesse server. You must make sure pop-ups are enabled for the Finesse desktop.

Note If you are using a Windows client, signed in as a Windows user, and using Internet Explorer, you must run Internet Explorer as an administrator to install these security certificates. In your Start menu, right-click Internet Explorer and select Run as administrator. Contact your administrator if you do not have the required permissions to install the security certificates.

Procedure

Step 1 Enter the URL for the Finesse desktop in your browser. Step 2 If you use Internet Explorer: a) A page appears that states there is a problem with the website's security certificate. Click Continue to this website (not recommended) to open the Finesse sign-in page. b) Enter your agent ID or username, password, and extension, and then click Sign In. The following message appears: Establishing encrypted connection... A dialog box appears that lists the certificates to accept. c) Click OK on the dialog box. A new browser tab opens for each certificate you need to accept. A certificate error appears in the address bar. Note Depending on your browser settings, a window may open for each certificate you need to accept instead of a browser tab.

d) Click Certificate error and then click View Certificates to open the Certificate dialog box. e) On the Certificate dialog box, click Install Certificate to open the Certificate Import Wizard. If you are using Internet Explorer 11 with Windows 8.1, the Install Certificate option does not appear until you add Finesse to your trusted sites. 1. From the browser menu, select Internet Options. 2. On the Security tab, click Trusted Sites, and then click Sites. 3. In the Add this website to the zone field, enter the URL for the Finesse desktop and click Add. 4. After you click Install Certificate, under Store Location, select Current User to install the certificate for the current user only, or select Local Machine to install the certificate for all Windows users who use this computer.

Common Tasks 5 Common Tasks Accept Security Certificates

If you select Local Machine, a dialog box appears that asks if you want to allow Windows host process to make changes to this computer. Select Yes.

f) On the Certificate Import Wizard, click Next. g) Select Place all certificates in the following store, and then click Browse. h) Select Trusted Root Certification Authorities, and then click OK. i) Click Next. j) Click Finish. A Security Warning dialog box appears that asks if you want to install the certificate. k) Click Yes. A Certificate Import dialog box that states the import was successful appears. l) Click OK. m) Click OK on the Certificate dialog box. n) Close the browser tab. You are asked to accept another certificate. Repeat the preceding steps until all certificates are accepted. After you accept all required certificates, the sign-in process completes. Note To remove the certificate error from the desktop, you must close and reopen your browser.

Step 3 If you use Firefox: a) A page appears that states this connection is untrusted. Click I Understand the Risks, and then click Add Exception. b) Ensure the Permanently store this exception check box is checked. c) Click Confirm Security Exception. The Finesse sign-in page appears. d) Enter your agent ID or username, password, and extension, and then click Sign In. The following message appears: Establishing encrypted connection... A dialog box appears that lists the certificates to accept. e) Click OK. A browser tab opens for each certificate that you need to accept. f) On each tab, click I Understand the Risks, and then click Add Exception. g) Ensure the Permanently store this exception check box is checked. h) Click Confirm Security Exception. Each tab closes after you accept the certificate. After you accept all required certificates, the sign-in process completes.

Common Tasks 6 Common Tasks Accept Certificates for Live Data Gadget

Accept Certificates for Live Data Gadget The Cisco Unified Intelligence Center Live Data gadget provides reports that you can view in the Finesse desktop. If your desktop contains these reports, the first time you sign in, you may be prompted to accept security certificates.

Procedure

Step 1 Sign in to the Finesse desktop. The Cisco Unified Intelligence Center Live Data gadget displays a message that states Finesse is checking for connectivity. If Finesse detects that security certificates must be accepted, a message appears that lists the certificates that you must accept to use Cisco Unified Intelligence Center. Note Each Cisco Unified Intelligence Center report displays this message.

Step 2 Click OK. A new browser tab (or window, depending on your browser settings) opens for each certificate that you need to accept. The message in the gadget changes to state that to continue, accept the certificates in the opened tabs.

Step 3 If you use Internet Explorer: a) Click Certificate error and then click View Certificates to open the Certificate dialog box. b) On the Certificate dialog box, click Install Certificate to open the Certificate Import Wizard. If you are using Internet Explorer 11 with Windows 8.1, the Install Certificate option does not appear until you add Finesse to your trusted sites. 1. From the browser menu, select Internet Options. 2. On the Security tab, click Trusted Sites, and then click Sites. 3. In the Add this website to the zone field, enter the URL for the Finesse desktop and click Add. 4. After you click Install Certificate, under Store Location, select Current User to install the certificate for the current user only, or select Local Machine to install the certificate for all Windows users who use this computer. If you select Local Machine, a dialog box appears that asks if you want to allow Windows host process to make changes to this computer. Select Yes.

c) On the Certificate Import Wizard, click Next. d) Select Place all certificates in the following store, and then click Browse. e) Select Trusted Root Certification Authorities, and then click OK. f) Click Next. g) Click Finish. A Security Warning dialog box appears that asks if you want to install the certificate. h) Click Yes. A Certificate Import dialog box that states the import was successful appears.

Common Tasks 7 Common Tasks Accept Certificates for Multi-session Chat and Email

i) Click OK. j) Click OK on the Certificate dialog box. k) Close the browser tab. You are asked to accept another certificate. Repeat the preceding steps until all certificates are accepted. After the browser tabs are closed, the Cisco Unified Intelligence Center Live Data gadget reloads.

Step 4 If you use Firefox: a) In each tab, click I Understand the Risks, and then click Add Exception. b) Ensure the Permanently store this exception check box is checked. c) Click Confirm Security Exception. After the browser tabs are closed, the Cisco Unified Intelligence Center Live Data gadget reloads.

Accept Certificates for Multi-session Chat and Email Before you can join a chat room or handle email contacts, you may be required to accept certificates in the Manage Chat and Email gadget on the Finesse desktop. When you sign in to Finesse, check the tab on which the Manage Chat and Email gadget appears to check whether you must accept any certificates and ensure the gadget loads properly.

Procedure

Step 1 Sign in to the Finesse desktop. The Manage Chat and Email gadget displays a message that states Finesse is checking for connectivity. If Finesse detects that security certificates must be accepted, a message appears that lists the certificates that you must accept to use the gadget.

Step 2 Click OK. A new browser tab (or window, depending on your browser settings) opens for each certificate that you need to accept.

Step 3 The steps to accept the certificates in your browser are the same as the steps you followed to accept the Live Data certificates. Follow the instructions for your browser type that are outlined in Accept Certificates for Live Data Gadget section.

Common Tasks 8 Common Tasks Sign Out of the Finesse Desktop

Sign Out of the Finesse Desktop

Important Do not close your browser to sign out of the Finesse desktop. Finesse can take up to 120 seconds to detect that your browser closed and an additional 60 seconds to sign you out. Finesse may continue to route contacts to you during this time. Sign out of the desktop as described in the following procedure.

Procedure

Step 1 Ensure your status is set to Not Ready. Click the status drop-down list and select Not Ready (or Not Ready with the appropriate reason ). Note If you handle chat and email contacts, you must ensure that your status is set to Not Ready in both the Call Control gadget and the Chat and Email Control gadget.

Step 2 Click Sign Out. A drop-down list appears that contains the Sign Out reason . Note If no Sign Out reason are configured for your team, Finesse signs you out when you click Sign Out.

Step 3 Select the appropriate Sign Out reason from this list. Step 4 On the sign out confirmation screen, you can choose to exit the browser or be redirected to the Finesse Desktop by clicking the Click here link. This will take you to any one of the following sign out scenarios: • The Finesse Landing page. To log in to the Finesse Desktop again, enter your Username, Password and Extension. • The Finesse Landing page. To log in to the Finesse Desktop again, enter your Extension. • The Log In page. To log in to the Finesse Desktop again, enter your Password and Extension.

Live Data Reports

Access Live Data Cisco Finesse agent and supervisor desktops provide Live Data gadget. Live Data gadget displays information about the current state of the contact center. This gadget receives data from the real-time data source at frequent intervals. This feature provides the following access: • Agents can access the Live Data agent reports.

Common Tasks 9 Common Tasks View Multiple Live Data Report Views

• Supervisors can access the Live Data agent and supervisor reports. To access reports, the administrator must add and configure them in the Cisco Finesse administration console. In Cisco Finesse agent desktop, click the My Statistics tab to access the reports. In Cisco Finesse supervisor desktop, click the Team Data tab and Queue Data tab to access the reports.

View Multiple Live Data Report Views Cisco Finesse allows you to view multiple Live Data reports or views on a single gadget. You can select the desired view to display from a drop-down list on the gadget toolbar, which lists up to five report views in Report Name - View Name format. Your administrator determines which views are available for you to select.

Note When you upgrade from an earlier version of Unified CCX 10.x to Unified CCX 11.0 version you can view the multiple live data reports on a single gadget only.

From the Live Data report toolbar, you can also do the following: • Pause and resume event updates in the Live Data gadget using the pause and play button. (If the button is paused when there are updates available on the gadget, a notification appears over the button.) • Hide and restore the toolbar using the arrow in the center of the toolbar. • Access help for the relevant reporting gadgets by clicking the help button.

View My History Use the My History tab on the Agent or Supervisor desktop to view your recent call history and state history.

Recent Call History On clicking the My History tab on the desktop, you can view the following details of the your calls since midnight: • Type: Indicates if the call was an Inbound or Outbound call. • Number: Indicates the phone number of the Inbound or Outbound call. • Disposition: Indicates the action taken for the call. • Wrap-Up Reason: Indicates the call reason category for the call. • Queue: Indicates the queue associated with the call. • Start-Time: Indicates the start time of the call. • Duration: Indicates the duration of the call. • For Inbound calls it includes the ring time, talk time and hold time. • For Outbound calls it includes dial tone, ring back, talk time, and hold time.

Common Tasks 10 Common Tasks View Context Service Data

• Make Call: Click on the call icon to initiate an outgoing call when in Ready or Not Ready state.

Recent State History On clicking the My History tab on the desktop, you can view the following details of your call state history since midnight: • Start Time: Indicates the time when agent state was initiated. • State: Indicates the ACD agent state. • Reason: Indicates the reason for the current agent state. • Duration: Indicates the duration of the agent state.

View Context Service Data Cisco Context Service is a cloud-based omnichannel solution for Cisco Unified Contact Center Express. It enables you to capture your customer’s interaction history by providing flexible storage of customer-interaction data across any channel. For more information about Context Service and to check service availability, see https://help.webex.com/ community/context-service.

Procedure

Step 1 To view the Context Service gadget, click the Manage Customer tab. Step 2 For information about how to use the Context Service, see the instructions provided in the gadget itself.

Common Tasks 11 Common Tasks View Context Service Data

Common Tasks 12