DOCSLIB.ORG

Classic and Advanced Ceramics: from Fundamentals to Applications. Robert B

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Classic and Advanced Ceramics: from Fundamentals to Applications. Robert B Robert B. Heimann Classic and Advanced Ceramics From Fundamentals to Applications Robert B. Heimann Classic and Advanced Ceramics Related Titles Aldinger, F., Weberruss, V. A. Volume 4: Applications Advanced Ceramics and 2012 Future Materials Hardcover ISBN: 978-3-527-31158-3 An Introduction to Structures, Properties and Technologies Öchsner, A., Ahmed, W. (eds.) 2010 Hardcover Biomechanics of Hard Tissues ISBN: 978-3-527-32157-5 Modeling, Testing, and Materials 2010 Riedel, R., Chen, I-W. (eds.) Hardcover Ceramics Science and ISBN: 978-3-527-32431-6 Technology 4 Volume Set Krenkel, W. (ed.) Hardcover Ceramic Matrix Composites ISBN: 978-3-527-31149-1 Fiber Reinforced Ceramics and their Applications Volume 1: Structures 2008 Hardcover 2008 ISBN: 978-3-527-31361-7 Hardcover ISBN: 978-3-527-31155-2 Öchsner, A., Murch, G. E., de Lemos, M. J. S. (eds.) Volume 2: Properties Cellular and Porous Materials 2010 Hardcover Thermal Properties Simulation and Prediction ISBN: 978-3-527-31156-9 2008 Hardcover ISBN: 978-3-527-31938-1 Volume 3: Synthesis and Processing 2010 Hardcover ISBN: 978-3-527-31157-6 Robert B. Heimann Classic and Advanced Ceramics From Fundamentals to Applications The Author All books published by Wiley-VCH are carefully produced. Nevertheless, authors, editors, and Prof. Dr. Robert B. Heimann publisher do not warrant the information Am Stadtpark 2A contained in these books, including this book, to 02826 Görlitz be free of errors. Readers are advised to keep in mind that statements, data, illustrations, procedural details or other items may inadvertently be inaccurate. Library of Congress Card No.: applied for British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library. Bibliographic information published by the Deutsche Nationalbibliothek The Deutsche Nationalbibliothek lists this publication in the Deutsche Nationalbibliografi e; detailed bibliographic data are available on the Internet at http://dnb.d-nb.de. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim All rights reserved (including those of translation into other languages). No part of this book may be reproduced in any form – by photoprinting, microfi lm, or any other means – nor transmitted or translated into a machine language without written permission from the publishers. Registered names, trademarks, etc. used in this book, even when not specifi cally marked as such, are not to be considered unprotected by law. Cover Design Formgeber, Eppelheim Typesetting Toppan Best-set Premedia Limited Printing and Binding Betz-Druck GmbH, Darmstadt Printed in the Federal Republic of Germany Printed on acid-free paper ISBN: 978-3-527-32517-7 V To Gabriele whose love, support, and patience were indispensable for creating this text. Classic and Advanced Ceramics: From Fundamentals to Applications. Robert B. Heimann © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 978-3-527-32517-7 VII Contents Preface XV 1 Introduction to Classic Ceramics 1 1.1 Ceramics through the Ages, and Technological Progress 1 1.2 Classifi cation of Ceramics 6 References 9 2 Mineralogy, Structure, and Green Processing of Clay Minerals 11 2.1 Natural Clay Minerals 12 2.1.1 Formation of Clay Minerals 13 2.1.2 Structure of Important Clay Minerals 16 2.1.2.1 Kaolinite 18 2.1.2.2 Illite 19 2.1.2.3 Montmorillonite: Structure and Application 22 2.1.3 Nomenclature of Clays 26 2.2 Synthetic Raw Materials 27 2.3 Processing and Forming of Clay Powders 30 2.3.1 Dry Forming Methods 31 2.3.2 Wet Forming Methods 31 2.4 Rheology of Clay Particle Suspensions 32 2.4.1 Modeling of Rheological Behavior 32 2.4.1.1 Linear Two-Element Models 34 2.4.1.2 Linear Three-Element Models 36 2.4.1.3 Nonlinear Models 37 2.4.2 Colloidal Processing of Clay 37 2.4.2.1 Structural Viscosity 37 2.4.2.2 Hofmeister Series 40 2.4.2.3 Effect of pH on Clay–Water Suspensions 41 2.4.2.4 Zeta (Electrokinetic) Potential 42 2.4.2.5 Thixotropy and Rheopexy 46 2.5 Drying of Green Clay Bodies 47 References 50 Classic and Advanced Ceramics: From Fundamentals to Applications. Robert B. Heimann © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 978-3-527-32517-7 VIII Contents 3 Important Ceramic Phase Systems 55 3.1 Fundamentals of Phase Diagrams 55 3.1.1 Gibbs’ Phase Rule 55 3.1.2 One-Component Phase Diagrams 57 3.1.3 Two-Component (Binary) Phase Diagrams 59 3.1.3.1 Simple Binary Phase Diagram without Intermediate Compound or Solid Solution 59 3.1.3.2 Complete Solid Solution of Two Components 61 3.1.4 Three-Component (Ternary) Phase Diagrams 62 3.1.4.1 Composition of a Ternary Compound 62 3.1.4.2 Phase Boundary Lines, Eutectic Points, and Degrees of Freedom 63 3.1.4.3 Compatibility Joins (Conodes) and Compatibility Triangles 64 3.1.4.4 The Complete (3-D) Ternary Phase Diagram 65 3.1.5 Four-Component (Quaternary) Phase Diagrams 68 3.1.5.1 Conclusion 70 3.2 Phase Systems with Ceramic Relevance 71 3.2.1 One-Component Systems 71 3.2.1.1 Silica 71 3.2.2 Two-Component Systems 81 3.2.2.1 Al2O3–SiO2 81 3.2.2.2 MgO–SiO2 84 3.2.2.3 CaO–SiO2 86 3.2.3 Three-Component Systems 88 3.2.3.1 CaO–Al2O3–SiO2 88 3.2.3.2 K2O–Al2O3–SiO2 89 References 94 4 Mineralogy and Chemistry of the Ceramic Firing Process 99 4.1 Introduction 99 4.2 Crystallography of the Thermal Transformation of Kaolinite 100 4.3 Thermal Transformations in Illitic Clays 104 4.4 Thermal Transformations and Phase Formation in the System MgO–CaO–Al2O3–SiO2 109 4.5 Thermal Transformations and Phase Formation in the System MgO–(Fe2O3)–Al2O3–SiO2 113 References 117 5 Mineralogy and Chemistry of Cements 119 5.1 Historical Development 119 5.2 Portland Cement 120 5.2.1 Introduction 120 5.2.2 Typical Composition and Materials Properties 121 5.2.3 Phase Composition 124 5.2.4 Hydration of Clinker Minerals 128 5.2.4.1 Calcium Silicates 128 Contents IX 5.2.4.2 Calcium Aluminate 129 5.2.4.3 Ferrite (Brownmillerite) 131 5.2.4.4 Kinetics of Hydration 132 5.2.5 Models of Hydration 133 5.2.5.1 Delayed Nucleation Model 133 5.2.5.2 Protective Layer Model 134 5.2.6 Setting and Hardening of Cement 136 5.3 High-Performance Concretes (HPC) 138 5.3.1 Mineral and Chemical Admixtures 138 5.3.1.1 Mineral Admixtures 138 5.3.1.2 Chemical Admixtures 139 5.3.2 DSP Cement 142 5.3.3 Macro-Defect-Free (MDF) Cement 143 5.3.4 Gas Concrete (Autoclaved Aerated Concrete; AAC) 144 5.4 Environmental Impact and Concrete Recycling 145 5.4.1 CO2 Emissions 146 5.4.2 NOx Emissions 146 5.4.3 Particulate Emissions and Visual Pollution 147 5.4.4 Water Pollution 147 5.4.5 Environmental Benefi ts 148 5.5 Future Developments and Outlook 150 5.5.1 Reduction of the Emission of Greenhouse Gases 150 5.5.2 Recycling of Concrete 151 References 153 6 Introduction to Advanced Ceramics 157 6.1 General Properties of Advanced Ceramics 157 6.2 The Current World Market Situation 163 6.2.1 Advanced Structural Ceramics 164 6.2.2 Advanced Electronic Ceramics 164 6.2.3 Advanced Ceramic Coatings 166 6.2.4 Chemical Processing and Environment-Related Ceramics 167 6.2.5 Bioceramics, Bioactive Glasses, and Coatings 168 6.3 Recent US and Global Forecasts 168 6.3.1 Advanced Ceramic Powders 170 6.3.2 Carbon Nanotubes 171 6.3.3 Ceramic Superconductors 171 References 172 7 Oxide Ceramics: Structure, Technology, and Applications 175 7.1 Alumina 175 7.1.1 General Properties and Application 175 7.1.2 Processing of Alumina 176 7.1.2.1 Extraction 176 7.1.2.2 Precipitation 177 X Contents 7.1.2.3 Calcination 178 7.1.3 Structure of Alumina Polymorphs 178 7.1.3.1 Stable Alumina Polymorphs 178 7.1.3.2 Transitional Alumina Polymorphs 182 7.1.4 Specifi c Properties and Applications 185 7.1.4.1 Duplex Al2O3–ZrO2 Ceramics 185 7.1.4.2 Stuffed Alumina Ceramics 185 7.1.4.3 Selected Applications of Alumina Ceramics 186 7.2 Zirconia 196 7.2.1 Introduction 196 7.2.2 Processing of Zirconia 197 7.2.3 Structure of Zirconia 199 7.2.4 Transformation Toughening of Zirconia Ceramics 201 7.2.5 Binary Phase Systems 208 7.2.5.1 System ZrO2–MgO 208 7.2.5.2 System ZrO2–CaO 208 7.2.5.3 System ZrO2–Y2O3 208 7.2.5.4 System ZrO2–CeO2 211 7.2.5.5 System ZrO2–Sc2O3 213 7.2.6 Selected Applications of Zirconia 215 7.2.6.1 Structural Applications 215 7.2.6.2 Functional Applications 219 7.3 Titania 235 7.3.1 General Properties and Applications 235 7.3.2 Processing of Titania 235 7.3.3 Structure of Titania 237 7.3.4 Selected Applications 238 7.3.4.1 Pigments 238 7.3.4.2 Semiconductor Gas Sensors 239 7.3.4.3 Photocatalysis 240 7.3.4.4 Antimicrobial Coatings 243 7.3.4.5 Photovoltaic Applications 243 References 245 8 Electroceramic Materials 253 8.1 Introduction 253 8.1.1 Defi nition and Properties of Ferroic, Smart, and Intelligent Materials 254 8.1.2 Historical Development of Dielectric Ceramics 256 8.2 Physics of Dielectric Materials 258 8.2.1 Dielectric Effects 258 8.2.2 Electric Polarization in Dielectric Materials 259 8.2.3 Characteristic Dielectric Parameters 267 8.3 Ferroelectric Ceramics 269 8.3.1 Barium Titanate (BT) 273 Contents XI 8.3.2 Lead Zirconate/Lead Titanate (PZT) 275 8.3.3 Ferroelectric Relaxor Ceramics 277 8.4 Microwave Ceramics 281 8.4.1 Grain Boundary Engineering 281 8.4.2 Design of Microwave Ceramics 283 8.5 Pyroelectric and Piezoelectric Ceramics 288 8.5.1 Pyroelectric Ceramics 289 8.5.2 Semiquantitative Model of Piezoelectricity 291 8.5.3 Novel Piezoelectric Single Crystals with CGG Structure 294 8.5.3.1 Structure of CGG Compounds 295 8.5.3.2 Czochralski Growth of Single Crystals 296 8.5.3.3 Selected Properties of Single Crystals with CGG Structure 297 8.6 Electro-Optic Ceramics 301 8.6.1 Linear Electro-Optic (Pockels) Effect 301
Load more

Recommended publications
  • View/Download PDF of This Article, the File Size
    INVESTIGATION OF STRUCTURE AND PROPERTIES OF THERMAL COATINGS OF WC—Co—Cr SYSTEM PRODUCED BY HIGH-VELOCITY METHODS OF SPRAYING Yu.S. BORISOV, E.A. ASTAKHOV, A.P. MURASHOV, A.P. GRISHCHENKO, N.V. VIGILYANSKAYA and M.V. KOLOMYTSEV E.O. Paton Electric Welding Institute, NASU 11 Bozhenko Str., 03680, Kiev, Ukraine. E-mail: [email protected] Spraying of coatings of WC—9Co—4Cr powder was performed by high-velocity procedures of thermal spraying, using the methods of detonation, supersonic air-gas plasma (SAGP) and oxy-fuel HVOF spraying. Microstructure and properties of produced coatings were investigated. Analysis of results of the coating structure examination showed that during spraying with these methods the dense coatings are formed, consisting of inclusions of tungsten carbide, uniformly distributed in Co—Cr matrix. Porosity of coatings is less than 1 %. Microhardness of SAGP- and HVOF-sprayed coatings is 11.0—11.7 GPa. As to the values of microhardness these coatings are superior to those of the galvanic chromium (10 GPa). Microhardness of the detonation coating is 8.5 GPa. The cause of decrease in hardness of the detonation coating is a partial loss of carbon and appearance of oxide inclusions in it, that is caused by the oxidizing medium of the detonation products. By the complex of characteristics of hardness, adhesion strength (more than 50 MPa) and porosity the coatings of WC—9Co—4Cr system, sprayed by SAGP and HVOF methods, are advantageous as compared with the galvanic chrome-plating. Among the investigated methods of high-velocity thermal spraying of coatings of WC—9Co—4Cr system the SAGP method is characterized by the highest efficiency (15 kg/h).
    [Show full text]
  • Microhardness Improvement by Using Thermal Sprayed Ni and Al Coatings by Detonation Gun
    e-ISSN (O): 2348-4470 Scientific Journal of Impact Factor (SJIF): 5.71 p-ISSN (P): 2348-6406 International Journal of Advance Engineering and Research Development Volume 5, Issue 04, April -2018 MICROHARDNESS IMPROVEMENT BY USING THERMAL SPRAYED NI AND AL COATINGS BY DETONATION GUN Mukesh kumar1, Mohd Vaseem2, Rajesh Kumar3 1Mechanical Engineering, Quantum University, Roorkee, India 2Mechanical Engineering, Quantum University, Roorkee, India 3Enginear, Welding/NDT, Engineeres India Limited RRFCL, Telagana, India Abstract - The present work was undertaken to increase the hardness of aluminium and nickel based coatings deposited by Detonation spray technique. The experimental work included deposition of Al2O3-TiO2 and Ni-Cr overlays of around 400 micron coating thickness, so as to achieve appropriate adhesion strength and hardness by using detonation gun spray technique (DS). Characterization of samples was made for further studies viz. as sprayed condition & post coating treatment. One of the hardfaced samples was subjected to post spray treatments of nitriding and compaction heat-treatment at 565° C for 2.5 hours and allowed to furnace cool, while another set of samples of both types of coatings was subjected to compaction at 12kN for 15 minutes. Systematic microstructural characterization of the coatings in the as-sprayed, nitrided conditions were carried out which included microhardness techniques in order to understand the effect of post treatment on the microstructure of these coatings. It is found that the microhardness values of base metal are enhanced almost three times after hardfacing/coatings with the Al2O3-TiO2 & Ni-Cr, using DS, which further enhanced after post treatment of nitriding and compaction.
    [Show full text]
  • Design Concepts of Gaseous Detonation Guns for Thermal Spraying
    ɌȿKA. COMMISSION OF MOTORIZATION AND ENERGETICS IN AGRICULTURE – 2013, Vol. 13, No.4, 82-91 Design concepts of gaseous detonation guns for thermal spraying Yuriy Kharlamov1, Maksym Kharlamov2 1Volodymyr Dahl East Ukrainian National University, Molodizhny bl., 20ɚ, Lugansk, 91034, Ukraine, e-mail: [email protected] 2E.O. Paton Electric Welding Institute 11 Bozhenko St., Kiev, 03680, Ukraine, e-mail: [email protected] Received September 12.2013: accepted October 10.2013 S u m m a r y . Presented a structural analysis of gaseous processes have exposed that higher detonation guns for spraying powder coatings and the performance and lifetime coatings can be possible variants of their operational cycle. The basic principles for the design of high detonation-gas plants produced if the feedstock particles are for spraying powder coatings, including the concept of a accelerated to a high velocity and heated prior valveless devices, are formulated. to impact on the substrate to be coated [4, K e y w o r d s . Gaseous detonation, coating deposition, 13, 27]. operational cycle. Almost in parallel to plasma spraying, Union Carbide (now Praxair Surface INTRODUCTION Technologies, Inc., Indianapolis. IN) marketed the trademarked D-Gun producing premium In spite of competing processes coatings, especially metallic and cermet ones, (chemical vapor deposition (CVD), physical which have long been the goal of all other vapor deposition (PVD), etc.) and certain coating processes, i.e., higher density, drawbacks, thermal spray process sales are improved corrosion barrier, higher hardness, increasing regularly (almost by 10% per year better wear resistance, higher bonding and since 1990 [6]). The growth will probably cohesive strength, almost no oxidation, thicker continue, because spraying techniques are coatings, and smoother as-sprayed surfaces.
    [Show full text]
  • Application Notes Metallographic Preparation of Thermal Spray Coatings
    Metallographic preparation of thermal spray coatings Application Notes Thermal spraying was invented in the early 1900s using zinc for „metallizing” substrates for corrosion protection. The development of the plasma spray gun in the late 50s and 60s made it commercially viable to use high temperature materials such as ceramics and refractory metals for coating materials. In addition to fl ame and plasma spraying, today thermal spray methods include high velocity and detona- tion spraying using a multitude of different spray materials for the most diverse and demanding applications. Thermal spray coatings are applied to a substrate to give a specifi c surface quali- ty, which it originally does not have. Thus Metallography of thermal spray coatings the bulk strength of a part is given by the can have several purposes: substrate, and the coating adds superior - To defi ne, monitor and control spraying surface qualities such as corrosion, wear conditions for quality control or heat resistance. - For failure analysis Therefore thermal spray coatings are wide- - For developing new products. ly used in the aerospace and power gene- ration industry for new and refurbished The procedure normally involves coating sections and parts for jet engines and a test coupon to defi ne and optimize the gas turbines, compressors and pumps. process for the part to be sprayed. Sec- The properties of some coatings can only tions of this test coupon are then metal- be fabricated by thermal spraying, using lographically prepared and examined to mainly metals, ceramics, carbides and assess coating thickness, size and distribu- composites as well as mixtures of various tion of porosity, oxides and cracks, adhe- materials.
    [Show full text]
  • Properties of WC–10%Co–4%Cr Detonation Spray Coating Deposited on the Al–4%Cu–1%Mg Alloy
    materials Article Properties of WC–10%Co–4%Cr Detonation Spray Coating Deposited on the Al–4%Cu–1%Mg Alloy Marina Samodurova 1, Nataliya Shaburova 2,* , Olga Samoilova 2, Ahmad Ostovari Moghaddam 2 , Kirill Pashkeev 1, Vladimir Ul’yanitckiy 3 and Evgeny Trofimov 2 1 Resource Center for Special Metallurgy, South Ural State University, 76 Lenin Av., Chelyabinsk 454080, Russia; [email protected] (M.S.); [email protected] (K.P.) 2 Department of Materials Science, Physical and Chemical Properties of Materials, South Ural State University, 76 Lenin Av., Chelyabinsk 454080, Russia; [email protected] (O.S.); [email protected] (A.O.M.); [email protected] (E.T.) 3 Laboratory of Synthesis of Composite Materials, Institute of Hydrodynamics, M.A. Lavrent’ev SB RAS, 15 Lavrent’ev Av., Novosibirsk 630090, Russia; [email protected] * Correspondence: [email protected] Abstract: One of the methods of local improvement of the wear resistance of aluminum alloy parts is the deposition of hard tungsten carbide-based coatings on the surfaces subjected to intense external influence. This paper is devoted to the characterization of the WC–10Co–4Cr (wt.%) coating deposited on an Al–4Cu–1Mg (wt.%) alloy by the detonation spray method. In comparison with the common thermal spray techniques like High Velocity Oxygen Fuel (HVOF) or Atmospheric Plasma Spraying (APS), the heat input delivered to the substrate during detonation spray is significantly lower, that is especially important in case of coating deposition on aluminum alloys. The paper presents the Citation: Samodurova, M.; results of morphology investigation, microstructure, phase composition, microhardness, and cohesive Shaburova, N.; Samoilova, O.; strength of deposited carbide-based detonation spray coating.
    [Show full text]
  • SHS Powders for Thermal Spray Coating†
    SHS Powders for Thermal Spray Coating† T. Talako*, A. Ilyuschenko and A. Letsko Powder Metallurgy Institute1 Abstract The possibilities of preparing advanced powders for thermal spraying functional coatings by the method of self-propagating high-temperature synthesis are discussed in this review. Besides important economical and ecological benefits, the method allows the formation of powders with improved or unique structure and properties in size ranges and with an external morphology suitable for different thermal spray processes. A number of novel powders and recent achievements are presented. Keywords: self-propagating high-temperature synthesis, powder, thermal spray coating ent, depending on the spraying process, the operat- Introduction ing conditions, the desired properties of the final Modern industrial technologies call for the devel- coating, etc. Besides the intrinsic material properties, opment of novel materials with improved properties, the technical requirements for the TS feedstock pow- lower costs and environmentally suitable processes. ders include good flowability and sprayability. They Surface engineering that attempts to create func- are greatly affected by the particle size, shape and tional layers on the surface is obviously the most morphology as well as particle size distribution. That economical way to provide high performance to is why thermal spray feedstock powder production machinery and equipment. Among the wide range processes must be reliable and flexible, while remain- of available methods (including varieties of atomistic ing as inexpensive as possible. and particulate deposition, bulk coatings wetting Self-propagating high-temperature synthesis (SHS) processes and surface modification), thermal spray or combustion synthesis, discovered by A.G. Mer- coatings offer the most versatile solutions.
    [Show full text]
  • Detonation Thermal Spraying Process of Metal
    Technology Lappeenranta/Imatra Degree Programme in Mechanical Engineering and Production Technology Specialisation Andrey Vinogradov Detonation thermal spraying process of metal- ceramic coating of the inner body of a regulating valve for maintenance of turbine condensate level in a deaerator for a nuclear power plant Bachelor’s Thesis 2015 1 Abstract Andrey Vinogradov Detonation thermal spraying process of metal-ceramic coating of the inner body of a regulating valve for maintenance of turbine condensate level in a deaerator for a nuclear power plant, 41 pages, 3 appendices Saimaa University of Applied Sciences Technology Lappeenranta Degree Programme in Mechanical Engineering and Production Technology Bachelor’s Thesis 2015 Instructors: Lecturer Jukka Nisonen, Saimaa University of Applied Sciences Managing Director Zelenin Y.V., main process engineer Shvedov N.G., process engineer Karpenko D., Center of Scientific-Technical Service "Prometey" The objective of the research was to examine a process of metal-ceramic deto- nation spraying, technology and realization of the procedure and its features for the given component. The work was commissioned by main process engineer Shvedov N. G. This study was carried out at the Center of Scientific-Technical Service "Prometey". The information was gathered from internal documentation of the enterprise, manuals, literature and by interviewing process engineers. As a result of this thesis the detonation coating process was investigated for a particular unit – the regulating valve. All the stages and requirements were pre- sented. The results can be applied to any detonation coating case or surface treatment matter where complex approach is necessary. Keywords: coating, valve, deposition, spraying, mixture, powder, assembly, component, aluminum oxide, spraying gun, surface, nozzle, plunger, process.
    [Show full text]
  • Mechanical Characterization of Composite Coatings Formed by Reactive Detonation Spraying of Titanium
    metals Article Mechanical Characterization of Composite Coatings Formed by Reactive Detonation Spraying of Titanium Sergey Panin 1,2,3,* ID , Ilya Vlasov 2,3, Dina Dudina 4,5 ID , Vladimir Ulianitsky 4, Roman Stankevich 3, Igor Batraev 4 and Filippo Berto 6 1 College of Physics, Jilin University, Changchun 130022, China 2 Institute of Strength Physics and Materials Science SB RAS, Tomsk 634055, Russia; [email protected] 3 Department of Materials Science in Mechanical Engineering, National Research Tomsk Polytechnic University, Tomsk 634050, Russia; [email protected] 4 Laboratory of Detonation Flows, Lavrentyev Institute of Hydrodynamics SB RAS, Novosibirsk 630090, Russia; [email protected] (D.D.); [email protected] (V.U.); [email protected] (I.B.) 5 Department of Mechanical Engineering and Technologies, Novosibirsk State Technical University, Novosibirsk 630073, Russia 6 Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7491 Trondheim, Norway; fi[email protected] * Correspondence: [email protected]; Tel.: +7-3822-286-904 Received: 18 August 2017; Accepted: 5 September 2017; Published: 8 September 2017 Abstract: The structure and mechanical properties of the coatings formed by reactive detonation spraying of titanium in a wide range of spraying conditions were studied. The variable deposition parameters were the nature of the carrier gas, the spraying distance, the O2/C2H2 ratio, and the volume of the explosive mixture. The phase composition of the coatings and the influence of the spraying parameters on the mechanical properties of the coatings were investigated. In addition, nanohardness of the individual phases contained in the coatings was evaluated. It was found that the composition of the strengthening phases in the coatings depends on the O2/C2H2 ratio and the nature of the carrier gas.
    [Show full text]
  • The Effect of Detonation Spraying on the Phase Composition And
    160 Eurasian Journal of Physics and Functional Materials 2020, 4(2), 160-166 The effect of detonation spraying on the phase composition and hardness of Al2O3 coatings B.K. Rakhadilov∗,1,2, D.B. Buytkenov1, D. Kakimzhanov1, R.S. Kozhanova2, G.S. Bektasova1 1S. Amanzholov East Kazakhstan State University, Ust-Kamenogorsk, Kazakhstan 2Limited partnership «PlasmaScience», Ust-Kamenogorsk, Kazakhstan E-mail: [email protected] DOI: 10.29317/ejpfm.2020040207 Received: 07.04.2020 - after revision The article were studied the effect of detonation spraying on the structure and properties of Al 2 O 3 coatings. It was determined that reducing the delay time between shots is leading to increase the hardness and elastic module of Al 2 O 3 coatings. It was found on the basis of X-ray diffraction analysis that the main reason for the increasing in hardness with a decreasing in the delay time between shots is associated with increasing in the volume fraction of α -Al 2 O 3 phase. The studies of X-ray diffraction presented that the highest content of the phase is achieved when the coatings are formed with a delay time between shots of 0.25 s. It was found that increasing in the volume fraction of the α -Al 2 O 3 phase is caused by the secondary recrystallization γ → α , which occurs due to the heating of particles during ◦ coating formation, i.e. due to increasing in temperature above 1100 C in single spots of the coating when they are put each other. Keywords: detonation deposition, aluminum oxide, phase, hardness, coating.
    [Show full text]
  • Structure and Properties of Coatings Formed by Detonation Spraying of Titanium Powder
    MTMNG IOP Publishing IOP Conf. Series: Materials Science and Engineering1234567890 286 (2017) 012025 doi:10.1088/1757-899X/286/1/012025 Structure and Properties of Coatings Formed by Detonation Spraying of Titanium Powder S V Panin1,2,3, I V Vlasov2,3, R V Stankevich3, D V Dudina4,5, V Yu Ulyanitsky4 and I S Batraev4 1Jilin University, 4026 Yatai St, Nanguan Qu, Changchun Shi, 130022, China 2Institute of Strength Physics and Materials Science SB RAS, 2/4, pr. Akademicheskii, Tomsk, 634055, Russia 3National Research Tomsk Polytechnic University, 30, Lenin Avenue, Tomsk, 634050, Russia 4Lavrentyev Institute of Hydrodynamics SB RAS, 15, pr. ac. Lavrentyeva, Novosibirsk, 630090, Russia 5Novosibirsk State Technical University, 20, pr. K. Marksa, Novosibirsk, 630073, Russia E-mail: [email protected] Abstract. Structure and properties of the coatings formed by detonation spraying of titanium powder have been studied at varying the deposition parameters (nature of carrier gas, spraying distance, O2/C2H2 ratio, and the volume of explosive mixture). It is shown that when air is used as the carrier gas the primary strengthening by the titanium oxide phases is realized. When nitrogen is introduced into the explosive mixture, a more complicated mechanism of hardening is realized due to the formation of titanium oxides, carbides, oxynitrides and carbonitrides. The aspects of employing the revealed “rational” modes of the detonation spraying for formation of protective composite coatings based on titanium possessing a complex of improved physical and mechanical properties are discussed. 1. Introduction At present, several coating deposition methods are known and widely used in the industry. One of the efficient technologies for restoration, repair and strengthening of machine parts is cold gas-dynamic spraying.
    [Show full text]
  • Improving Wear Resistance of Grey Cast Iron Using Detonation Gun Sprayed Coatings: a Review
    www.ijemr.net ISSN (ONLINE): 2250-0758, ISSN (PRINT): 2394-6962 Volume-5, Issue-1, February-2015 International Journal of Engineering and Management Research Page Number: 303-307 Improving Wear Resistance of Grey Cast Iron using Detonation Gun Sprayed Coatings: A Review Gobind1, Jawala Parshad2, Dr. Neel Kanth Grover3 1,2,3Department of Mechanical Engineering, S.B.S.S.T.C, Ferozepur, Punjab, INDIA ABSTRACT finely divided metallic or nonmetallic materials are Materials are precious resources. Different methods deposited in a molten or semi molten condition to form a and techniques are employed to protect the materials from coating. The coating material may be in the form of degradation. As the wear is a surface phenomenon and occurs powder, ceramic-rod, wire, or molten materials [2]. mostly at outer surfaces. Failure of mechanical components As shown in figure 1, Thermal spraying can provide due to wear is the most common and unavoidable problem in thick coatings (approx. thickness range is 20 micrometers automobiles, power generation units (hydro power plants), construction equipments, marine sector, gas and fuel to several mm, depending on the process and feedstock), pipelines and other mechanical processing industries. It not over a large area at high deposition rate as compared to only affects the life of a component but also reduces its other coating processes such performances. Therefore due to heavy economic losses as electroplating, physical and chemical vapor deposition. associated with wear, this problem has attracted the attention Coating materials available for thermal spraying include of the researchers worldwide. To overcome this problem of metals, alloys, ceramics, plastics and composites.
    [Show full text]
  • Thermal Spraying
    Thermal Spraying Thermal Spraying DIN 32530: Thermal spraying comprises processes that feature: - full or partial melting of spraying feedstock (or at least sufficient heat transfer in order to provide a state of high plastic deformation capability) inside or outside a spraying torch - propelling of spray particles onto a prepared substrate surface - substrate surface is (usually) not melted Definition Heat and Momentum Substrate Transfer Spraying gun Energy source -Flame -Arc -Plasma Spraying feedstock -Powder -Wire -Rod Principle of Thermal Spraying Coating formation Thermal Spraying Spraying direction Pores Oxides Heat flux Lateral spreading Contact zones Impact of spray particles on substrates Pore Oxidized particle Not fully molten particle Substrate Formation of thermal spray coatings t = 0.00 µs -50 µm 0 50 t = 0.08 µs t = 0.03 µs -50 µm -50 0 µm 0 50 50 t = 0.13 µs d = 50 µm, v = 200 m/s Spreading of a AlPart. Part. -50 µm 0 50 2 O 3 particle on a substrate t = 0.23 µs -50 µm 0 50 t = 0.62 µs t = 0.36 µs -50 µm -50 0 µm 0 50 50 t = 5.00 µs d = 50 µm, v = 200 m/s Spreading of an AlPart. Part. -50 µm 0 50 2 O 3 particle on a substrate 15 30 45 60 75 > 75 P [MPa] t = 0.04 µs t = 0.10 µs -0.1 0.1 -0.1 0.1 mm mm t = 0.06 µs t = 0.23 µs -0.1 0.1 -0.1 0.1 mm mm t = 0.09 µs t = 0.36 µs -0.1 0.1 -0.1 0.1 mm mm Pressure distribution in an Al2O3 particle during spreading on a steel substrate white dashs: t = 0.62 µs solidification boundary -0.10 0.10 [mm] Temperature [K] t = 3.00 µs -0.10 0.10 > 1550 [mm] > 1300 >1050 t = 10.00 µs -0.10
    [Show full text]