NI Product Guide
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Facilitating Modeling and Simulation of Complex Systems Through Interoperable Software Jeannie Sullivan Falcon, Ph.D
Facilitating Modeling and Simulation of Complex Systems Through Interoperable Software Jeannie Sullivan Falcon, Ph.D. Chief Engineer, Control & Simulation Overview ▪ Introduction ▪ Models in the design, development, and operation of complex cyber-physical systems ▪ Industry and technology trends – connectivity, autonomy, and electrification ▪ Customer needs – interoperability, open source software, complex physical models ▪ Beachhead applications ▪ Lessons learned Mission Statement NI equips engineers and scientists with systems that accelerate productivity, innovation, and discovery. ni.com Accelerating Engineering for More Than Four Decades 1977 1986 1991 2004 2013 Introduces GPIB to LabVIEW starts Creates the Alliance Makes FPGAs Introduces connect instruments the computer-based Partner Network to accessible to engineers software-designed to mini computers measurement revolution strengthen ecosystem and scientists instrumentation 2020 1976 1983 1987 1998 2006 2014 NI founded Introduces first GPIB board Releases data acquisition Creates PXI and expands Announces Leads prototyping to connect instruments solutions to provide opportunities with CompactDAQ of 5G systems to IBM PCs accurate measurements complete to increase system solutions measurement accuracy $1.23 7,500+ EMPLOYEES BILLION 35,000+ OVER 18% 50+ COUNTRIES IN 2016 CUSTOMERS WORLDWIDE INVESTMENT IN R&D $1,400 $1,200 $1,000 $800 Long-Term Track Record of Growth $600 $400 Revenue in millions USD $200 $0 '87 '88 '89 '90 '91 '92 '93 '94 '95 '96 '97 '98 '99 '00 '01 '02 '03 '04 '05 '06 '07 '08 '09 '10 '11 '12 '13 '14 '15 '16 A software-centric platform that accelerates the development and increases the productivity of test, measurement, and control systems. ni.com ONE-PLATFORM APPROACH NI SERVICES AND SUPPORT THIRD-PARTY SOFTWARE THIRD-PARTY HARDWARE WEB SERVICES NI PRODUCTIVE ARDUINO PYTHON DEVELOPMENT SOFTWARE ETHERNET C/C#/.NET USB The MathWorks, Inc. -
DAQ Assistant Help
DAQ Assistant Help January 2008, 370467L-01 This help file describes how to use the DAQ Assistant to interactively configure common measurement tasks, global virtual channels, or scales. In NI LabVIEW 7.x and later, NI LabWindows™/CVI™ 7.x and later, or NI Measurement Studio 7.x and later, you also can use the DAQ Assistant to generate NI-DAQmx code from your tasks and global virtual channels. You can also use the DAQ Assistant with NI LabVIEW SignalExpress 2.x and later. To navigate this help file, use the Contents, Index, and Search tabs to the left of this window. For more information about this help file, refer to the following topics: Conventions—formatting and typographical conventions used in this help file Related Documentation Glossary Important Information Technical Support and Professional Services To comment on National Instruments documentation, refer to the National Instruments Web site. © Copyright 2003–2008 National Instruments Corporation. All rights reserved. Related Documentation The following documents contain information that you might find helpful as you use this help file: DAQ Getting Started Guide—This guide describes how to install the NI-DAQmx driver software, your data acquisition (DAQ) device, and how to confirm that your device is operating properly. LabVIEW Help—This help file contains information about LabVIEW palettes, menus, tools, VIs, and functions. This help file also includes step-by-step instructions for using LabVIEW features. In LabVIEW, select Help. LabWindows/CVI Help—The LabWindows/CVI Help includes the following sections: Using LabWindows/CVI—Information about windows, menus, commands, dialog boxes, and options for customizing configuration defaults. -
Ingo Foldvari Business Development Manager – Academic
Ingo Foldvari Business Development Manager – Academic Cell +1.760.691.0877 [email protected] linkedin.com/in/ingofoldvari NI Technical Seminar Developing Embedded DAQ, Monitoring and Control Applications The World of Converged Devices More capability defined in software - Functions change rapidly - Increasingly complex to design and test Mission Statement NI equips engineers and scientists with systems that accelerate productivity, innovation, and discovery. ni.com Accelerating Engineering for More Than Four Decades 1977 1986 1991 2004 2013 Introduces GPIB to LabVIEW starts Creates the Alliance Makes FPGAs Introduces connect instruments the computer-based Partner Network to accessible to engineers software-designed to mini computers measurement revolution strengthen ecosystem and scientists instrumentation 2020 1976 1983 1987 1998 2006 2014 NI founded Introduces first GPIB board Releases data acquisition Creates PXI and Announces Leads prototyping to connect instruments solutions to provide expands opportunities CompactDAQ of 5G systems to IBM PCs accurate measurements with complete to increase system solutions measurement accuracy Long 50+ COUNTRIES50+ EMPLOYEES - Term Track Record Growth of Record Track Term 7,500+ $1.23 BILLION IN 2015 Revenue in millions USD WORLDWIDE CUSTOMERS $1,000 $1,200 $1,400 $200 $400 $600 $800 $0 '84 35,000+ '87 '88 '89 '90 '91 '92 '93 '94 '95 '96 '97 '98 '99 '00 '01 INVESTMENT IN R&D INVESTMENT '02 '03 '04 18%OVER '05 '06 '07 '08 '09 '10 '11 '12 '13 '14 '15 A software-centric platform approach to accelerate the development of any system that needs test, measurement, and control. ni.com ONE-PLATFORM APPROACH NI SERVICES AND SUPPORT THIRD-PARTY SOFTWARE THIRD-PARTY HARDWARE WEB SERVICES NI PRODUCTIVE ARDUINO PYTHON DEVELOPMENT SOFTWARE ETHERNET C USB The MathWorks, Inc. -
Reconfigurable Chassis for NI Compactrio NI Crio-911X
Technical Sales (866) 531-6285 [email protected] Ordering Information | Detailed Specifications For user manuals and dimensional drawings, visit the product page resources tab on ni.com. Last Revised: 2013-07-23 14:41:43.0 Reconfigurable Chassis for NI CompactRIO NI cRIO-911x Easy-to-use LabVIEW FPGA automatically synthesizes electrical circuit 4- or 8-slot chassis for any CompactRIO I/O module implementation DIN-rail mount, 19 in. rack mount, and panel mount options NI CompactRIO Extreme Industrial Certifications and Ratings RIO FPGA core executes at default rates of 40 MHz, and can be compiled to run even Design hardware in LabVIEW faster Comparison Tables Chassis Module Slots FPGA LUTs and Flip-Flops Multipliers cRIO-9111 4 Virtex-5 LX30 19,200 32 cRIO-9112 8 Virtex-5 LX30 19,200 48 cRIO-9113 4 Virtex-5 LX50 28,800 48 cRIO-9114 8 Virtex-5 LX50 28,800 48 cRIO-9116 8 Virtex-5 LX85 51,840 48 cRIO-9118 8 Virtex-5 LX110 69,120 64 Back to Top Application and Technology NI CompactRIO reconfigurable chassis are the heart of the CompactRIO system because they contain the reconfigurable I/O (RIO) core. You program the RIO field-programmable gate array (FPGA) core, which has an individual connection to each I/O module, with easy-to-use elemental I/O functions to read or write signal information from each module. Because there is no shared communication bus between the RIO FPGA core and the I/O modules, you can precisely synchronize I/O operations on each module with 25 ns resolution. -
NI-Daqmx to Program Your National Instruments Device
NI-DAQ™mx Help January 2008, 370466L-01 This help file contains information about using NI-DAQmx to program your National Instruments device. NI-DAQmx is the software you use to communicate with and control your NI data acquisition (DAQ) device. Refer to Support in NI-DAQ 8.7 in the NI-DAQ 8.7 Readme for a list of devices supported in NI-DAQmx. This document describes only NI-DAQmx. For information on Traditional NI-DAQ (Legacy), refer to the Traditional NI-DAQ (Legacy) User Manual. For more information about this help file, refer to the following topics: Using Help Related Documentation Important Information Technical Support and Professional Services To comment on National Instruments documentation, refer to the National Instruments Web site. © 2003–2008 National Instruments Corporation. All rights reserved. Related Documentation Many manuals also are available as PDFs. You must have Adobe Acrobat Reader with Search and Accessibility 5.0.5 or later installed to view the PDFs. Refer to the Adobe Systems Incorporated Web site to download Acrobat Reader. Refer to the National Instruments Product Manuals Library for updated documentation resources. The following documents contain information that you may find helpful as you use this help file. For additional details on these documents, along with their default installation locations, refer to ni.com/kb. DAQ Assistant Help DAQ Getting Started Guide Getting Started with LabVIEW Getting Started with LabVIEW SignalExpress LabVIEW Help LabVIEW Real-Time User Manual LabVIEW SignalExpress Help -
Compactdaq Controllers Cdaq-913X
Technical Sales (866) 531-6285 [email protected] Ordering Information For user manuals and dimensional drawings, visit the product page resources tab on ni.com. Last Revised: 2015-08-03 11:01:10.0 CompactDAQ Controllers cDAQ-913x Intel processor with options for dual-core or quad-core Atom, Core i7, or Celeron Ultra-rugged options with -40 ºC to 70 ºC operating temperatures Up to 32 GB onboard nonvolatile storage and SDHC storage Measure in minutes with NI-DAQmx software and automatic code generation using More than 60 hot-swappable I/O modules with integrated signal conditioning the DAQ Assistant USB, Gigabit Ethernet, serial, MXI-Express, and CAN/LIN for connectivity 4 general-purpose 32-bit counter/timers built into the chassis (access through digital module) Overview High-performance cDAQ-913x controllers include Intel processing and up to 32 GB nonvolatile storage in a rugged enclosure for advanced data-logging and embedded monitoring applications. You have the option to use a Microsoft Windows Embedded Standard 7 (WES7) or a real-time OS. Choose WES7 on a cDAQ-913x to take advantage of the extensive Windows ecosystem of software and display capabilities made possible by LabVIEW software. LabVIEW Real-Time, which is recommended for long-term reliability, uses a local display with the NI Linux Real-Time OS (on the cDAQ-9132/9133/9134/9135/9136/9137 controllers). A high-performance cDAQ-913x controller also offers a wide array of standard connectivity and expansion options, including USB, Ethernet, serial, MXI-Express, CAN/LIN, trigger input, and Mini DisplayPort or VGA display output. -
NI Cdaq-9184 4-Slot Ethernet NI Compactdaq Chassis
Technical Sales (866) 531-6285 [email protected] Ordering Information For user manuals and dimensional drawings, visit the product page resources tab on ni.com. Last Revised: 2014-11-06 07:15:13.0 NI cDAQ-9184 4-Slot Ethernet NI CompactDAQ Chassis Measure up to 128 channels of sensor, analog I/O, and digital I/O signals Standard IEEE 802.3ab Gigabit Ethernet communication interface Choose from more than 50 hot-swappable I/O modules with integrated signal Access four 32-bit advanced general-purpose counters built into the chassis conditioning Simplify setup with zero configuration networking and web-based configuration Run up to seven hardware-timed measurement I/O tasks simultaneously Pair with the Moxa AWK-3121 wireless access point for high-speed wireless streaming Stream continuous waveform I/O with patented NI Signal Streaming technology applications Overview Simple, Complete Ethernet Data Acquisition The NI cDAQ-9184 is a 4-slot NI CompactDAQ Gigabit Ethernet chassis designed for remote or distributed sensor and electrical measurements. A single NI CompactDAQ chassis can measure up to 256 channels of sensor signals, analog I/O, digital I/O, and counter/timers with an Ethernet interface back to a host PC or laptop. By combining more than 50 sensor-specific NI C Series I/O modules with patented NI Signal Streaming technology, the NI CompactDAQ platform delivers high-speed data and ease of use in a flexible, mixed-measurement system. Modules are available for a variety of sensor measurements including thermocouples, resistance temperature detectors (RTDs), strain gages, load and pressure transducers, torque cells, accelerometers, flow meters, and microphones. -
Crio-904X Getting Started Guide Sequence Software Corresponding Programming Mode
GETTING STARTED GUIDE cRIO-904x Embedded CompactRIO Controller with Real-Time Processor and Reconfigurable FPGA This document describes how to begin using the cRIO-904x. In this document, the cRIO-9040, cRIO-9041, cRIO-9042, cRIO-9043, cRIO-9045, cRIO-9046, cRIO-9047, cRIO-9048, and cRIO-9049 are referred to collectively as cRIO-904x. Note Refer to the device Safety, Environmental, and Regulatory Information document, shipped with your cRIO-904x controller and available on ni.com/ manuals, for important safety and environmental specifications necessary when setting up your device. Unpacking the Kit Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. 1. Touch the antistatic package to a metal part of the computer chassis. 2. Remove the device from the package and inspect the device for loose components or any other sign of damage. Notice Never touch the exposed pins of connectors. Note Do not install a device if it appears damaged in any way. 3. Unpack any other items and documentation from the kit. Store the device in the antistatic package when the device is not in use. What You Need to Get Started Verify that the following items are included in the cRIO-904x controller kit. Figure 1. cRIO-904x Kit Contents 1 2 3 4 5 6 7 8 1. Controller (4-Slot or 8-Slot) 5. SD Card Cover (Ships Connected on Front Panel) 2. USB Type-A Male to USB Type-C Male Cable 6. Screwdriver 3. -
Measurement Studio Evaluation Guide
Measurement StudioTM Evaluation Guide Measurement Studio Evaluation Guide April 2008 350836E-01 Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide Offices Australia 1800 300 800, Austria 43 662 457990-0, Belgium 32 (0) 2 757 0020, Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 5050 9800, Czech Republic 420 224 235 774, Denmark 45 45 76 26 00, Finland 358 (0) 9 725 72511, France 01 57 66 24 24, Germany 49 89 7413130, India 91 80 41190000, Israel 972 3 6393737, Italy 39 02 41309277, Japan 0120-527196, Korea 82 02 3451 3400, Lebanon 961 (0) 1 33 28 28, Malaysia 1800 887710, Mexico 01 800 010 0793, Netherlands 31 (0) 348 433 466, New Zealand 0800 553 322, Norway 47 (0) 66 90 76 60, Poland 48 22 3390150, Portugal 351 210 311 210, Russia 7 495 783 6851, Singapore 1800 226 5886, Slovenia 386 3 425 42 00, South Africa 27 0 11 805 8197, Spain 34 91 640 0085, Sweden 46 (0) 8 587 895 00, Switzerland 41 56 2005151, Taiwan 886 02 2377 2222, Thailand 662 278 6777, Turkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545 For further support information, refer to the Technical Support and Professional Services appendix. To comment on National Instruments documentation, refer to the National Instruments Web site at ni.com/info and enter the info code feedback. © 2001–2008 National Instruments Corporation. All rights reserved. -
Stand-Alone NI Compactdaq Embedded Measurement and Logging System NI Cdaq-9138, NI Cdaq-9139
Technical Sales United States (866) 531-6285 [email protected] Print | E-mail this Page | Open Document as PDF Ordering Information For user manuals and dimensional drawings, visit the product page resources tab on ni.com. Last Revised: 2012-08-31 12:04:34.0 Stand-Alone NI CompactDAQ Embedded Measurement and Logging System NI cDAQ-9138, NI cDAQ-9139 Intel dual-core processor with options for Core i7 or Celeron 4 general-purpose 32-bit counter/timers built into chassis (access through digital 32 GB nonvolatile storage, 2 GB DDR3 800 MHz RAM module) More than 50 hot-swappable I/O modules with integrated signal conditioning Measure in minutes with NI-DAQmx software and automatic code generation using the DAQ Assistant 4 USB Hi-Speed, 2 Gigabit Ethernet, 2 serial, and 1 MXI-Express port for connectivity and expansion Run up to 7 hardware-timed analog I/O, digital I/O, or counter/timer operations simultaneously Overview The high-performance stand-alone NI cDAQ-9138 and cDAQ-9139 eight-slot chassis include Intel dual-core processing and 32 GB nonvolatile storage for advanced data-logging and embedded monitoring applications. The processing power of the chassis makes them well suited to perform the online processing tasks required by complex applications such as image detection and machine life-cycle prognostics. You have the option to use a Microsoft Windows Embedded Standard 7 (WES7) or real-time OS. Choose WES7 on a cDAQ-913x to take advantage of the extensive Windows ecosystem of software and display capabilities made possible by NI LabVIEW software. -
USER GUIDE and SPECIFICATIONS NI Cdaq-9172
USER GUIDE AND SPECIFICATIONS NI cDAQ-9172 Français Deutsch ni.com/manuals Contents Introduction............................................................................................. 4 Safety Guidelines .................................................................................... 5 Safety Guidelines for Hazardous Voltages...................................... 5 Related Documentation........................................................................... 6 Device Documentation and Specifications ...................................... 9 Training Courses.............................................................................. 9 Technical Support on the Web......................................................... 9 Installing the Software ............................................................................ 10 Installing NI-DAQmx ...................................................................... 10 Installing Other Software................................................................. 10 Installing the NI cDAQ-9172.................................................................. 11 Mounting the NI cDAQ-9172.......................................................... 12 NI 9901 Desktop Mounting Kit................................................ 12 NI 9910 DIN-Rail Kit............................................................... 13 NI 9905 Panel Mount Kit ......................................................... 13 Setting Up the NI cDAQ-9172............................................................... -
National Instruments Cdaq-9184 Datasheet 2
Full-service, independent repair center -~ ARTISAN® with experienced engineers and technicians on staff. TECHNOLOGY GROUP ~I We buy your excess, underutilized, and idle equipment along with credit for buybacks and trade-ins. Custom engineering Your definitive source so your equipment works exactly as you specify. for quality pre-owned • Critical and expedited services • Leasing / Rentals/ Demos equipment. • In stock/ Ready-to-ship • !TAR-certified secure asset solutions Expert team I Trust guarantee I 100% satisfaction Artisan Technology Group (217) 352-9330 | [email protected] | artisantg.com All trademarks, brand names, and brands appearing herein are the property o f their respective owners. Find the National Instruments cDAQ-9189 at our website: Click HERE Technical Sales (866) 531-6285 [email protected] Ordering Information For user manuals and dimensional drawings, visit the product page resources tab on ni.com. Last Revised: 2014-11-06 07:15:13.0 NI cDAQ-9184 4-Slot Ethernet NI CompactDAQ Chassis Measure up to 128 channels of sensor, analog I/O, and digital I/O signals Standard IEEE 802.3ab Gigabit Ethernet communication interface Choose from more than 50 hot-swappable I/O modules with integrated signal Access four 32-bit advanced general-purpose counters built into the chassis conditioning Simplify setup with zero configuration networking and web-based configuration Run up to seven hardware-timed measurement I/O tasks simultaneously Pair with the Moxa AWK-3121 wireless access point for high-speed wireless streaming Stream continuous waveform I/O with patented NI Signal Streaming technology applications Overview Simple, Complete Ethernet Data Acquisition The NI cDAQ-9184 is a 4-slot NI CompactDAQ Gigabit Ethernet chassis designed for remote or distributed sensor and electrical measurements.