Ht-R390 Ht-R290

Total Page:16

File Type:pdf, Size:1020Kb

Ht-R390 Ht-R290 Contents AV Receiver Introduction ...................................2 HT-R390 Connections.................................10 HT-R290 Turning On & Basic Operations ......17 Instruction Manual Advanced Operations .................27 Controlling Other Components...38 Appendix......................................44 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. En Introduction WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of electric shock to DO NOT REMOVE COVER (OR BACK). NO persons. USER-SERVICEABLE PARTS INSIDE. REFER The exclamation point within an equilateral triangle is SERVICING TO QUALIFIED SERVICE intended to alert the user to the presence of important PERSONNEL. operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 15. Damage Requiring Service 2. Keep these instructions. Unplug the apparatus from the wall outlet and refer 3. Heed all warnings. servicing to qualified service personnel under the 4. Follow all instructions. following conditions: 5. Do not use this apparatus near water. A. When the power-supply cord or plug is damaged, 6. Clean only with dry cloth. B. If liquid has been spilled, or objects have fallen 7. Do not block any ventilation openings. Install in into the apparatus, accordance with the manufacturer’s instructions. C. If the apparatus has been exposed to rain or water, 8. Do not install near any heat sources such as radiators, D. If the apparatus does not operate normally by heat registers, stoves, or other apparatus (including following the operating instructions. Adjust only amplifiers) that produce heat. those controls that are covered by the operating 9. Do not defeat the safety purpose of the polarized or instructions as an improper adjustment of other grounding-type plug. A polarized plug has two blades controls may result in damage and will often with one wider than the other. A grounding type plug require extensive work by a qualified technician to has two blades and a third grounding prong. The wide restore the apparatus to its normal operation, blade or the third prong are provided for your safety. E. If the apparatus has been dropped or damaged in If the provided plug does not fit into your outlet, any way, and consult an electrician for replacement of the obsolete F. When the apparatus exhibits a distinct change in outlet. performance this indicates a need for service. 10. Protect the power cord from being walked on or 16. Object and Liquid Entry pinched particularly at plugs, convenience receptacles, Never push objects of any kind into the apparatus and the point where they exit from the apparatus. through openings as they may touch dangerous 11. Only use attachments/accessories specified by the voltage points or short-out parts that could result in a manufacturer. fire or electric shock. 12. Use only with the cart, stand, PORTABLE CART WARNING The apparatus shall not be exposed to dripping or tripod, bracket, or table splashing and no objects filled with liquids, such as specified by the manufacturer, vases shall be placed on the apparatus. or sold with the apparatus. Don’t put candles or other burning objects on top of When a cart is used, use this unit. caution when moving the 17. Batteries cart/apparatus combination to Always consider the environmental issues and follow avoid injury from tip-over. S3125A local regulations when disposing of batteries. 13. Unplug this apparatus during lightning storms or when 18. If you install the apparatus in a built-in installation, unused for long periods of time. such as a bookcase or rack, ensure that there is 14. Refer all servicing to qualified service personnel. adequate ventilation. Servicing is required when the apparatus has been Leave 20 cm (8") of free space at the top and sides and damaged in any way, such as power-supply cord or 10 cm (4") at the rear. The rear edge of the shelf or plug is damaged, liquid has been spilled or objects board above the apparatus shall be set 10 cm (4") have fallen into the apparatus, the apparatus has been away from the rear panel or wall, creating a flue-like exposed to rain or moisture, does not operate gap for warm air to escape. normally, or has been dropped. The temperature protection operates if the apparatus attain an abnormal high temperature. The apparatus cannot operate until it has cooled down. En 2 Precautions 1. Recording Copyright—Unless it’s for personal use For U.S. models only, recording copyrighted material is illegal without FCC Information for User the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact The user changes or modifications not expressly approved your Onkyo dealer. by the party responsible for compliance could void the 3. Care—Occasionally you should dust the unit all over user’s authority to operate the equipment. with a soft cloth. For stubborn stains, use a soft cloth NOTE: dampened with a weak solution of mild detergent and This equipment has been tested and found to comply with water. Dry the unit immediately afterwards with a the limits for a Class B digital device, pursuant to Part 15 clean cloth. Don’t use abrasive cloths, thinners, of the FCC Rules. These limits are designed to provide alcohol, or other chemical solvents, because they may reasonable protection against harmful interference in a damage the finish or remove the panel lettering. residential installation. 4. Power This equipment generates, uses and can radiate radio WARNING frequency energy and, if not installed and used in BEFORE PLUGGING IN THE UNIT FOR THE accordance with the instructions, may cause harmful FIRST TIME, READ THE FOLLOWING SECTION interference to radio communications. However, there is CAREFULLY. no guarantee that interference will not occur in a particular AC outlet voltages vary from country to country. installation. If this equipment does cause harmful Make sure that the voltage in your area meets the interference to radio or television reception, which can be voltage requirements printed on the unit’s rear panel determined by turning the equipment off and on, the user (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz). is encouraged to try to correct the interference by one or The power cord plug is used to disconnect this unit more of the following measures: from the AC power source. Make sure that the plug is • Reorient or relocate the receiving antenna. readily operable (easily accessible) at all times. • Increase the separation between the equipment and Pressing the [ON/STANDBY] button to select receiver. Standby mode does not fully disconnect from the • Connect the equipment into an outlet on a circuit mains. If you do not intend to use the unit for an different from that to which the receiver is connected. extended period, remove the power cord from the AC • Consult the dealer or an experienced radio/TV outlet. technician for help. 5. Preventing Hearing Loss Caution For Canadian Models Excessive sound pressure from earphones and NOTE: THIS CLASS B DIGITAL APPARATUS headphones can cause hearing loss. COMPLIES WITH CANADIAN ICES-003. 6. Batteries and Heat Exposure For models having a power cord with a polarized plug: Warning CAUTION: TO PREVENT ELECTRIC SHOCK, Batteries (battery pack or batteries installed) shall not MATCH WIDE BLADE OF PLUG TO WIDE SLOT, be exposed to excessive heat as sunshine, fire or the FULLY INSERT. like. 7. Never Touch this Unit with Wet Hands—Never Modèle pour les Canadien handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside REMARQUE: CET APPAREIL NUMÉRIQUE DE this unit, have it checked by your Onkyo dealer. LA CLASSE B EST CONFORME À LA NORME NMB- 8. Handling Notes 003 DU CANADA. • If you need to transport this unit, use the original Sur les modèles dont la fiche est polarisée: packaging to pack it how it was when you originally ATTENTION: POUR ÉVITER LES CHOCS bought it. ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS • Do not leave rubber or plastic items on this unit for LARGE DE LA FICHE DANS LA BORNE a long time, because they may leave marks on the CORRESPONDANTE DE LA PRISE ET POUSSER case. JUSQU’AU FOND. • This unit’s top and rear panels may get warm after prolonged use. This is normal. • If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally. En 3 For British models Supplied Accessories Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by Make sure you have the following accessories: qualified service personnel. IMPORTANT Indoor FM antenna (➔ page 16) AM loop antenna (➔ page 16) The wires in the mains lead are coloured in accordance Power cord (Brazilian models) (➔ page 16) with the following code: Remote controller (RC-762M) and two batteries Blue: Neutral (AA/R6) (➔ page 4) Brown: Live As the colours of the wires in the mains lead of this * In catalogs and on packaging, the letter at the end of the product apparatus may not correspond with the coloured markings name indicates the color.
Recommended publications
  • Configure Surround Sound on an Intel NUC Or Comptue Stick
    Surround Sound Setup Guide for NUC This guide will show the recommend method to setup surround sound through bitstreaming. Bitstreaming is the process whereby the NUC sends an un-encoded digital signal to an A/V receiver, to which the receiver will decode the signal, not the NUC, and often produces better quality sound, depending on the receiver. What is Needed: AV Receiver with HDMI or TOSLINK (SPDIF), if using optical audio Surround speakers (5.1 or 7.1) 2 HDMI cables or a TOSLINK cable (a mini DisplayPort to HDMI cable can also be used from the NUC to the Receiver) HDMI display, keyboard, mouse NUC running Windows* Media Player Classic* (https://mpc-hc.org/) 1. Download and install the latest Intel® graphics drivers (https://downloadcenter.intel.com/) 2. Connect the HDMI or mini DisplayPort cable from the NUC to an HDMI input of the AV receiver. If using TOSLINK on the NUC, connect the NUC’s TOSLINK output to a TOSLINK input on the receiver. 3. Start Windows* and download and install Media Player Classic* (MPC-HC) (http://mpc-hc.org/downloads/) 4. Open MPC-HC. On the Menu bar, click View, then Options. 5. On the left side menu tree, click on Internal Filters, then click on Video Decoder (on the bottom of the screen). 6. It’s suggested that Hardware Acceleration be used, especially if 4K content is played, choose a Hardware Acceleration option, then click OK. 7. If 4K or HEVC (h.265) content is going to be played, also select, HEVC, and UHD (4K).
    [Show full text]
  • DIRECTV® Universal Remote Control User's Guide
    DirecTV-M2081A.qxd 12/22/2004 3:44 PM Page 1 ® DIRECTV® Universal Remote Control User’s Guide DirecTV-M2081A.qxd 12/22/2004 3:44 PM Page 2 TABLE OF CONTENTS Introduction . .3 Features and Functions . .4 Key Charts . .4 Installing Batteries . .8 Controlling DIRECTV® Receiver. .9 Programming DIRECTV Remote . .9 Setup Codes for DIRECTV Receivers . .10 Setup Codes for DIRECTV HD Receivers . .10 Setup Codes for DIRECTV DVRs . .10 Programming to Control Your TV. .11 Programming the TV Input Key . .11 Deactivate the TV Input Select Key . .11 Programming Other Component Controls . .12 Manufacturer Codes . .13 Setup Codes for TVs . .13 Setup Codes for VCRs . .16 Setup Codes for DVD Players . .19 Setup Codes for Stereo Receivers . .20 Setup Codes for Stereo Amplifiers . .22 Searching For Your Code in AV1 or AV2 Mode . .23 Verifying The Codes . .23 Changing Volume Lock . .24 Restore Factory Default Settings . .25 Troubleshooting . .26 Repair or Replacement Policy . .27 Additional Information . .28 2 DirecTV-M2081A.qxd 12/22/2004 3:44 PM Page 3 INTRODUCTION Congratulations! You now have an exclusive DIRECTV® Universal Remote Control that will control four components, including a DIRECTV Receiver, TV, and two stereo or video components (e.g 2nd TV, DVD, or stereo). Moreover, its sophisticated technology allows you to consolidate the clutter of your original remote controls into one easy-to-use unit that's packed with features such as: z Four-position slide switch for easy component selection z Code library for popular video and stereo components z Code search to help program control of older or discon- tinued components z Memory protection to ensure you will not have to re- program the remote when the batteries are replaced Before using your DIRECTV Universal Remote Control, you may need to program it to operate with your particular com- ponent.
    [Show full text]
  • NR1601 - Slim Design AV Receiver
    NR1601 - Slim Design AV Receiver Some people (or their partners) just don’t want a big box in their living room. That’s why Marantz created a slim- line AV Receiver. Which means now you can enjoy fabulous ear-cracking sound from an elegant slim-line box: the NR1601. But don’t let appearances deceive you, this super-slim model packs as much punch as its big brothers, thanks to the discrete 7x 50W rms output and it creates a tidal wave of multichannel surround sound. On the video side, the four HDMI 1.4a inputs all support 3D video, while all analogue video signals are con- verted to HDMI level including I/P conversion. The set-up is easy - with the help of Audyssey MultEQ and Microphone - no need to study the manual, just follow the on-screen menu instructions. And, just like its bigger brothers, the NR1601 has an iPod-digital-compatible USB input, as well as an M-DAX2 to make the very most of sound quality from compressed audio. It all adds up to easy to use slim-line elegance with a powerful punch. Main Features • 7x 50 Watts RMS (8 ohm) • Dolby TrueHD, DTS-HD Master Audio, ProLogic IIz • HDMI v1.4a (3D) - 4in / 1out • Audyssey MultEQ, Dynamic EQ and Dynamic Volume • I/P scaling and videoconversion from analogue to HDMI • iPod/iPhone compatible USB input iPod/iPhone compatible • M-XPort for optional RX101 Bluetooth module NR1601 SPECIFICATIONS NR1601 Variable cross over 10 MULTICHANNEL SURROUND Lip sync control o THX Ultra II / Select II -/- Multiroom zones - THX Surround EX - Front flap - DTS HD / DTS 5.1 / DTS ES / DTS 96/24 o/o/o/o
    [Show full text]
  • Remote Control Codes
    Remote Control Codes 1. While holding down the REMOTE MODE button to which you want to enter a code, press and hold down the [DISPLAY] button until the Remote indicator lights (about 3 seconds). On Integra products, button names are capitalized. For example, “Remote Mode” button and “Display” button. 2. Within 30 seconds, use the number buttons to enter the 5-digit remote control code. The Remote indicator flashes twice. Notes: • Remote control codes cannot be entered for the [RECEIVER] and [ZONE 2] REMOTE MODE buttons. • Only TV remote control codes can be entered for the [TV] REMOTE MODE button. Codes de télécommande 1. Maintenez enfoncé le bouton REMOTE MODE pour lequel vous voulez entrer un code et appuyez sur le bouton [DISPLAY] jusqu’à ce que l’indicateur de télécommande s’allume (environ 3 secondes). 2. Entrez les 5 chiffres du code de télécommande avec les boutons numériques dans les 30 secondes. Le témoin Remote clignote deux fois. Remarque: • Il est impossible d’entrer des codes de télécommande pour les boutons [RECEIVER] et [ZONE 2] REMOTE MODE. • Il est impossible d’entrer d’autres codes de télécommande que des codes de téléviseur pour le bouton [TV] REMOTE MODE. Códigos de control remoto 1. Mientras mantiene pulsado el botón REMOTE MODE en el que desea introducir un código, mantenga pulsado el botón [DISPLAY] hasta que se ilumine el indicador Remoto (unos 3 segundos). 2. En menos de 30 segundos, utilice los botones de número para introducir el código de 5 dígitos para con- trol remoto. El indicador Remote parpadea dos veces.
    [Show full text]
  • Basic Manual Hookup Step1: Choose Your Speaker Layout
    SN29402177B_TX-RZ810_BAS_En_1702xx.book 1 ページ 2017年2月9日 木曜日 午後3時33分 > Before start > Hookup > Setup > Playback > Part Names Basic Manual Hookup Step1: Choose your Speaker Layout .......................................3 Step2: Connect the Speakers ..................................................9 Step3: Connect the TV ..........................................................11 Step4: Connect the AV Components .....................................13 Step5: Multi-zone Connection ...............................................16 Step6: Connect Other Cables ................................................19 Setup Step7: Power On & Initial Setup ............................................20 HDMI Setup ...........................................................................21 Playback Basic Playback ......................................................................22 Network Functions .................................................................23 Others ....................................................................................25 Part Names Front Panel ............................................................................27 Display ...................................................................................28 Rear Panel ............................................................................29 Remote Controller .................................................................30 This manual includes information needed when starting up and also instructions for frequently used operations. The "Advanced
    [Show full text]
  • Sr6008 Av Receiver
    Product information SR6008 AV RECEIVER HD 4K VIDEO PC AUDIO STREAMING Just as you would expect from any Marantz AV receiver, the SR6008 pays Main Features extra special attention to audio quality, and it creates a highly immersive • 7ch discrete power amplifier, 185 W per channel and richly detailed surround sound experience. Moreover, with the latest • Current Feedback circuitry with Marantz HDAM current feedback topology and the Marantz own-developed high-definition • DLNA1.5 Network audio streaming and Internet radio HDAMs, the SR6008 has both the power and the finesse to astonish and • MP3, WAV, AAC, FLAC, WMA, Lossless, FLAC192/24 (HD) astound. • Gapless Playback Not surprisingly, it has the same DLNA networking facilities for HD gap- • Spotify*, last.fm*, Flickr, Internet Radio support less audio streaming as its big brother, the SR7008, as well as the same • Apple AirPlay and Windows 8/RT compatible Android integration, Spotify Service, Internet radio, and AirPlay from • Audyssey MultEQ XT, Dynamic EQ and Dynamic Volume iTunes or any iDevice. It has a highly convenient HDMI input on the front, • DTS Neo:X (up to 7.1) and Audyssey DSX Processing and two HDMI outs on the rear for simultaneous output. And another, new • 6+1in HDMI (3D/ARC/CEC/4K), HDMI output for Zone2 HDMI output for multiroom use. • Full 4k compatibility – Scaling – Pass through – GUI overlay Also like its brother, it has Audyssey DSX and DTS Neo:X 7.1 processing, • Analogue & HDMI Upconversion to 4k an iPod-digital-compatible USB input and a Phono MM input for vinyl • InstaPrevue, to preview HDMI input sources on screen fans.
    [Show full text]
  • Complete AV Solutions for Whole Home, Media Space and Digital Signage
    2015 Issue 1 Complete AV Solutions for Whole Home, Media Space and Digital Signage 10 Year Warranty, Educational Programs, Design Services and Dedicated 7 Days a Week Support 70 Daggett Drive, San Jose, CA 95134 | Telephone: 877.536.3976 | International: 408.962.0515 | www.atlona.com © 2015 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Digital Whole Home Solution Challenge Homes today have at panel TV’s in virtually every room. With all these TVs come unsightly black boxes, cables, and other equipment. Interior decorators absolutely hate it. Redundant Set Top Boxes and other sources for every room in the home is unattractive, costly, maintenance intensive, and reduces available living space. Remote controls usually come with these devices and are different for every room, that only confuses the homeowner. Solution Atlona’s matrix switchers allow any source to be routed to any television in the home. All equipment is centrally located and becomes a shared resource where it is out of sight which maintains the elegance of the home. System service is easier since all hardware is centrally located. They are available in several different sizes and with HDMI or HDBaseTTM outputs to support TVs up to 328 feet (100m) from the switch. Application Diagram & Speci cations Equipment Rack Living Room with 5.1 Channel Audio 6x6 version also available TV AT-UHD-PRO3-66M AV Receiver Cable Box 8 x 8 HDMI to HDBaseT Matrix Switcher [model no.
    [Show full text]
  • Remote Control Codes
    Remote Control Codes DVD VCR/DVR CBL/SAT 1. While holding down the REMOTE MODE button 123 REMOTE MODE GAME/TV AUX1 AUX2 that you want to enter the code, press the DVD VCR STANDBY 456 TAPE TUNER CD [STANDBY] button. CD TV 789 CDR/MD On Integra products, button names are capitalized. For PHONO CABLE +10 0 example, “Remote Mode” button and “Display” button. SAT 2. Use the number buttons to enter the 4-digit remote control code. Note: • Remote control codes cannot be entered for the [RECEIVER] and [DOCK] REMOTE MODE buttons. Codes de télécommande Códigos de control remoto 1. Maintenez enfoncé le bouton REMOTE MODE 1. Mientras mantiuene pulsado el botón REMOTE auquel vous voulez attribuer un code et appuyez sur MODE para el que desea entrar el código, pulse el le bouton [STANDBY]. botón [STANDBY]. 2. Entrez les 4 chiffres du code de télécommande avec 2. Utilice los botones de número para introducir el les boutons numériques. código de 4 dígitos para control remoto. Remarque: Nota: • Il est impossible d’entrer des codes de • Los códigos del control remoto no se pueden entrar télécommande pour les boutons [RECEIVER] et para los botones [RECEIVER] y [DOCK] [DOCK] REMOTE MODE. REMOTE MODE. Codici del telecomando Fernbedienungscodes 1. Mentre tenete premuto il pulsante REMOTE MODE 1. Halten Sie die änderungsbedürftige REMOTE per il quale volete inserire il codice, premete il MODE-Taste gedrückt, während Sie die pulsante [STANDBY]. [STANDBY]-Taste betätigen. 2. Utilizzate i pulsanti numerici per inserire il codice di 2. Geben Sie mit den Zifferntasten den 4-stelligen telecomando a 4 cifre.
    [Show full text]
  • T 747 AV Receiver
    T 747 AV Receiver > POSITIONING NAD has an enviable reputation for delivering superb value for money, especially when performance is a priority. The T 747 will further enhance this reputation by offering the very latest high defi nition features and performance at a very competitive price. Though not offering quite the degree of customization of our higher priced Modular Design Construction AVR’s, the T 747 features the same remarkable fl exibility of NAD’s highly refi ned User Interface. And unlike other brands that infl ate their power ratings to impress the unwary, NAD offers Full Disclosure Power ratings that clearly spell out the capabilities of our products under real world conditions. > F E A T U R E S > D E T A I L S Performance • 7 X 60 watts Simultaneous Full • SD signals are converted to HD up to Don’t be fooled by the big power ratings of some Disclosure Power 1080p with onboard Faroudja DCDi very low priced products. All power is not the Processing • 7 X 120 watts Minimum Continuous same! In fact, the quality of power is far more Power (FTC) • 6 Analogue Audio Inputs, plus 7.1 important than the quantity of power when it • Auto Setup and Calibration of speaker analogue input comes to the realism of your Home Theatre. The settings with supplied microphone • 2 Optical and 2 Coax Digital amplifi er section is more important than ever with • Data Port for use with optional NAD Audio Inputs the new HD audio formats. Dock for iPod • 4 Analogue Video (S-Video and The T 747 has all the performance required to • Dolby TrueHD and DTS HD Master Composite) and 3 Component fi ll an average sized room to satisfyingly realistic Audio lossless decoding Video inputs sound levels without the harsh and muddled • Front Panel Inputs for games, • Dolby Digital Plus, ProLogic IIx, DTS sound so common among lesser AVRs.
    [Show full text]
  • 4K HDR Hdbaset TX/RX with Ethernet, Control, Poe, and Return Audio AT-CENT-301-CEA
    4K HDR HDBaseT TX/RX with Ethernet, Control, PoE, and Return Audio AT-CENT-301-CEA The Atlona Centum™ 301 CEA (AT-CENT-301-CEA) is a premium HDBaseT™ extender pair for high dynamic range (HDR) formats. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. It provides HDMI transmission up to 330 feet (100 meters) over category cable with embedded multi-channel audio, Ethernet pass-through, RS-232 and IR control, and Power over Ethernet. The Centum 301 CEA features visually lossless VESA Display Stream Compression (DSC) to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT. It also supports the HDMI Audio Return Channel with the ability to transmit digital audio from a television back to the transmitter, and then to an AV receiver via HDMI or a TOSLINK digital audio output. Supports HDR and 4K/60 4:4:4 Video Content: The Centum 301 CEA is ideal for applications requiring the latest as well as emerging 4K/UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats, and color space formats supported in the HDMI 2.0a specification, plus the ability to pass metadata for HDR content. The AT-CENT-301-CEA includes EDID management features, LED indicators for power and signal status, and remote PoE powering for the receiver. Receiver to Transmitter Audio Return Pathway: The Centum 301 CEA provides a dedicated audio return pathway from a television to an AV receiver via HDBaseT 2.0 technology, and the option of using the HDMI Audio Return Channel or TOSLINK digital audio connections.
    [Show full text]
  • Home • Support • Technical Articles • from the Big Screen to the Basement
    Home • Support • Technical Articles • From the Big Screen to the Basement From the Big Screen to the Basement When I moved to GA in September 2007, one of my absolute requirements for a house was that it needed a basement. I've had a dream for a long time of having my very own dedicated home theater in my basement. I didn't have a budget for top of the line components or anything fancy, just something that I built myself. The main components I needed for my Home Theater were Receiver, Projector, Speakers, Seating and Video Sources such as a Playstation 3. Fortunately for me, the previous owners had completely finished the basement including a drop tile ceiling. That drop ceiling made it very easy for me to run cables above the ceiling and through walls. When I decide to add something to my setup, I can easily just remove the ceiling tiles and run more cables. If I wasn't fortunate enough to have a drop ceiling previously installed, I likely would have used raceways to run the cables. Another idea to hide cables is to install crown molding around the room and leave a channel inside large enough to run cabling through. Of course there is always the age-old method of removing sections of the drywall and running cables properly through the walls. That sounds like a lot of work and was a bit outside of my skill set. The eventual layout for my theater was fairly straightforward. With the various doors, closets and single window I really only had one choice on where the screen would be located.
    [Show full text]
  • Best Hifi Av Receiver
    Best Hifi Av Receiver Placeless and urinary Pavel phonemicizing some chaunter so inwardly! Fumigatory and grazed Nigel lallygags her apiculturists coleoptiles fever and squirt heftily. Anticlinal Wilhelm scaring irreproachably and showily, she thrones her Nestorians oversewed refutably. That will also have seen it perfect design, you require a fantastic quality and to bring high, as far from one important for? Hdmi out in stack without the hifi dealer and irritating to the surface of excellent choice of richness to play high frequency spectrum of light and best hifi av receiver sound setups all the jacks connected to! You best buy through the hifi account bluetooth tool is best hifi av receiver that center and the av receiver which can be a simulated atmos immersive. We have surround amplifier to drive, this time so be viewed as well worth a matter. For amplification and computer to avidia highly affordable way from best hifi av receiver fit you use. But with that best hifi av receiver? This model that is meant for? The hifi dealer can limit for best hifi av receiver brands both a human and. Another and depending on everything from. Hdmi inputs and connectivity, and sounded great option for active and a decent enough. It allows the sound better receivers with streaming services llc associates program designed for decoding. Goodwill and fm radio feature dolby surround capabilities for easy to? If you best for the hifi account a new to the total quality home and best hifi av receiver? Circle with bluetooth to deliver the cheapest list with like low price.
    [Show full text]