OPERATION TIME: • Because of the gentle natural thermal convection drying boots and shoes are best left to dry overnight. • Drying time varies depending upon extent of moisture present in the boot or shoe, the size of the boot or shoe and the surrounding or ambient temperature and humidity. • We recommend a minimum of four hours every time your boots are used. • The MaxxDrySD™ is so gentle you can actually store your boots and shoes on the working unit to always have dry warm boots, shoes and gloves when you should need them. MAINTENANCE: MaxxDrySD™ SilentDry™ - MX00206 Use only mild soap and a damp cloth to clean the MaxxDrySD™. Never immerse any part of the heating element into liquid. Silent Shoe & Boot Dryer IMPORTANT: To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. ACCESSORIES: Recommended accessories for use with your MaxxDrySD™ are available from MaxxDry.com. If you need assistance regarding accessories, please call: 1-888-330-9452 or email: [email protected]. CAUTION: The use of any accessory or attachment not recommended may be hazardous and may void warranty. SERVICE INFORMATION: MaxxDry™ Service Center is staffed with trained personnel to provide customers with efficient and reliable product service. Whether you need technical advice, repair, or genuine factory replacement parts, contact: MaxxDry™ Service Center at: [email protected]. FULL THIRTY (30) YEAR USE WARRANTY: MaxxDry™ (U.S.) warrants this product for Thirty (30) Years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase, store name and date of purchase may be required. Please check with the retailer for their specific return policy regarding returns. INSTRUCTION MANUAL The second option is to take or send the product (prepaid) to a MaxxDry™ authorized service center for repair or replacement at our discretion. Proof of purchase, store name and date of purchase may be required. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the service center. This product is not intended for commercial BEFORE RETURNING THIS PRODUCT use. FOR ANY REASON PLEASE CALL THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY: 1-888-330-9452 - Any modification to MaxxDrySD™ - Product has been misused or improperly cared for - Products over Thirty (30) year from date of original purchase IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE - Warranty request without original receipt ™ - Repairs done by anyone other than MaxxDry™ or a MaxxDry™ authorized repair facility A PROBLEM WITH YOUR MaxxDry PRODUCT In consideration of the above promises by MaxxDry™, the buyer agrees to and accepts the following conditions: CALL 1-888-330-9452 1. That this warranty is in lieu of all other warranties, expressed or implied. 2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED OR WAIVED. Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the 3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from MaxxDry™ provided any outside of the product box and the store receipt with purchase date. In most cases, a MaxxDry™ representative can resolve the problem and all warranty defects fall within the warranty period and meets all warranty provisions. over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please send 4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise, which the buyer may them via email to: [email protected]. Your feedback is vital to MaxxDry™. have against MaxxDry™. SAVE THIS MANUAL FOR FUTURE REFERENCE

MaxxDry.com September 2012 MaxxDry.com GENERAL SAFETY RULES STATEMENT – Please make a note of this! The MaxxDrySD™ is completely silent, No Noise and generates No Wind! Your MaxxDrySD™ dries by WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. natural thermal convection technology; there are no fans and no moving parts and therefore it will not blow Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury. hot air or make noise. The MaxxDrySD™ heats to a moderate temperature in about 10 minutes. It does not get hot, but warms the air which will naturally rise up through the drying tubes and into your wet boots or shoes. An air parcel will rise naturally if the air within the parcel is warmer than the sur rounding air (like a SAVE THESE INSTRUCTIONS hot air balloon). The cool damp air present inside the wet boot or shoe is then forced down and out when warm air rises and pushes AREA OF USE: the cool damp air out of the way. As the warm air naturally cools • Keep surrounding area clean and well lit. Cluttered areas invite accidents. and becomes diluted while mixing with the surrounding air, it loses some of its buoyancy (its ability to rise) and a natural movement • Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. of air begins to dry your wet, damp boots or shoes evenly and CAUTION – RISK OF OVERHEATING THE UNIT IS POSSIBLE! without damage. • NEVER block air flow from freely exiting the boot or garment being dried. • Do NOT place gloves, mittens or any garment that may close off or reduce the air from escaping the drying tubes or the risk of overheating the unit is possible. • The Glove Drying Attachment is required for gloves or mittens and the extensions are required for taller boots. • Do NOT operate in standing water. *See Note #7 Below • Extensions are required for tall boots. • Do NOT dry socks or hats.

ELECTRICAL SAFETY: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do NOT modify the OPERATING INSTRUCTIONS: plug in any way. 1. Assemble the MaxxDrySD™ base by sliding the front half into the channels on the back. Make sure • Do NOT overload with garments. it gently moves into place. • Do NOT cut-off or restrict air circulation. 2. Affix the two drying tubes to the base unit tubes. 3. Slip the two boot anvils onto the two drying tubes, facing forward toward the front of the unit. • Do NOT expose MaxxDrySD™ to rain or snow. 4. Carefully slide footwear upside down onto drying tubes, being careful not to restrict air flow at the • Use of attachments not recommended or sold by MaxxDry™ may result in a risk of fire, electric shock, bottom by loosening the tongue and laces between the footwear and drying tubes. or injury to persons. 5. Plug the MaxxDrySD™ into any standard household 110 Volt 60 Hz electrical outlet. • To reduce risk of damage to electric plug and cord, pull only by the plug rather than cord when 6. Make sure the toe of the boot or shoe is higher than the heel so the footwear will dry thoroughly. disconnecting unit. 7. Keep the air vents at the back of the MaxxDrySD™ free of obstruction or this will cut off the natural • Make sure cord is positioned so that it will not be stepped on, tripped over, or other wise subjected to circulation of air. damage or stress. *NOTE! There must be 6 inches of clearance between the top of the footwear and the base • An extension cord should not be used unless absolutely necessary. Use of improper extension cord of the dryer. This allows the natural circulation of air to dry foot wear properly. If you cannot could result in a risk of fire, electric shock or electrocution. obtain the 6 inches of clearance because you’re drying longer boots, you can purchase • Two- wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension additional drying tubes to allow drying taller boots. cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the 8. Do not place footwear or gear on drying tubes without anvils. The anvils are engineered to help circulate extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor warm air through footwear for maximum efficiency. use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord 9. Do not place the MaxxDrySD™ close to a secondary heat source such as a fireplace or wood burning is suitable for outdoor use. stove, or over floor vents. • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety as well as 10. Please do not dry any kind of gloves without using the glove adaptor. Failure to do so will harm the dryer. to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the 11. Drying Ski Boots is not recommended. capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1 12. Never totally block the drying tube. Always leave room around the garment being dried for air to escape. extension to make up the total length, be sure each extension contains at least the minimum wire size. MaxxDry.com MaxxDry.com GENERAL SAFETY RULES STATEMENT – Please make a note of this! The MaxxDrySD™ is completely silent, No Noise and generates No Wind! Your MaxxDrySD™ dries by WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. natural thermal convection technology; there are no fans and no moving parts and therefore it will not blow Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury. hot air or make noise. The MaxxDrySD™ heats to a moderate temperature in about 10 minutes. It does not get hot, but warms the air which will naturally rise up through the drying tubes and into your wet boots or shoes. An air parcel will rise naturally if the air within the parcel is warmer than the sur rounding air (like a SAVE THESE INSTRUCTIONS hot air balloon). The cool damp air present inside the wet boot or shoe is then forced down and out when warm air rises and pushes AREA OF USE: the cool damp air out of the way. As the warm air naturally cools • Keep surrounding area clean and well lit. Cluttered areas invite accidents. and becomes diluted while mixing with the surrounding air, it loses some of its buoyancy (its ability to rise) and a natural movement • Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. of air begins to dry your wet, damp boots or shoes evenly and CAUTION – RISK OF OVERHEATING THE UNIT IS POSSIBLE! without damage. • NEVER block air flow from freely exiting the boot or garment being dried. • Do NOT place gloves, mittens or any garment that may close off or reduce the air from escaping the drying tubes or the risk of overheating the unit is possible. • The Glove Drying Attachment is required for gloves or mittens and the extensions are required for taller boots. • Do NOT operate in standing water. *See Note #7 Below • Extensions are required for tall boots. • Do NOT dry socks or hats.

ELECTRICAL SAFETY: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do NOT modify the OPERATING INSTRUCTIONS: plug in any way. 1. Assemble the MaxxDrySD™ base by sliding the front half into the channels on the back. Make sure • Do NOT overload with garments. it gently moves into place. • Do NOT cut-off or restrict air circulation. 2. Affix the two drying tubes to the base unit tubes. 3. Slip the two boot anvils onto the two drying tubes, facing forward toward the front of the unit. • Do NOT expose MaxxDrySD™ to rain or snow. 4. Carefully slide footwear upside down onto drying tubes, being careful not to restrict air flow at the • Use of attachments not recommended or sold by MaxxDry™ may result in a risk of fire, electric shock, bottom by loosening the tongue and laces between the footwear and drying tubes. or injury to persons. 5. Plug the MaxxDrySD™ into any standard household 110 Volt 60 Hz electrical outlet. • To reduce risk of damage to electric plug and cord, pull only by the plug rather than cord when 6. Make sure the toe of the boot or shoe is higher than the heel so the footwear will dry thoroughly. disconnecting unit. 7. Keep the air vents at the back of the MaxxDrySD™ free of obstruction or this will cut off the natural • Make sure cord is positioned so that it will not be stepped on, tripped over, or other wise subjected to circulation of air. damage or stress. *NOTE! There must be 6 inches of clearance between the top of the footwear and the base • An extension cord should not be used unless absolutely necessary. Use of improper extension cord of the dryer. This allows the natural circulation of air to dry foot wear properly. If you cannot could result in a risk of fire, electric shock or electrocution. obtain the 6 inches of clearance because you’re drying longer boots, you can purchase • Two- wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension additional drying tubes to allow drying taller boots. cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the 8. Do not place footwear or gear on drying tubes without anvils. The anvils are engineered to help circulate extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor warm air through footwear for maximum efficiency. use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord 9. Do not place the MaxxDrySD™ close to a secondary heat source such as a fireplace or wood burning is suitable for outdoor use. stove, or over floor vents. • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety as well as 10. Please do not dry any kind of gloves without using the glove adaptor. Failure to do so will harm the dryer. to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the 11. Drying Ski Boots is not recommended. capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1 12. Never totally block the drying tube. Always leave room around the garment being dried for air to escape. extension to make up the total length, be sure each extension contains at least the minimum wire size. MaxxDry.com MaxxDry.com OPERATION TIME: • Because of the gentle natural thermal convection drying boots and shoes are best left to dry overnight. • Drying time varies depending upon extent of moisture present in the boot or shoe, the size of the boot or shoe and the surrounding or ambient temperature and humidity. • We recommend a minimum of four hours every time your boots are used. • The MaxxDrySD™ is so gentle you can actually store your boots and shoes on the working unit to always have dry warm boots, shoes and gloves when you should need them. MAINTENANCE: MaxxDrySD™ SilentDry™ - MX00206 Use only mild soap and a damp cloth to clean the MaxxDrySD™. Never immerse any part of the heating element into liquid. Silent Shoe & Boot Dryer IMPORTANT: To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. ACCESSORIES: Recommended accessories for use with your MaxxDrySD™ are available from MaxxDry.com. If you need assistance regarding accessories, please call: 1-888-330-9452 or email: [email protected]. CAUTION: The use of any accessory or attachment not recommended may be hazardous and may void warranty. SERVICE INFORMATION: MaxxDry™ Service Center is staffed with trained personnel to provide customers with efficient and reliable product service. Whether you need technical advice, repair, or genuine factory replacement parts, contact: MaxxDry™ Service Center at: [email protected]. FULL THIRTY (30) YEAR USE WARRANTY: MaxxDry™ (U.S.) warrants this product for Thirty (30) Years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase, store name and date of purchase may be required. Please check with the retailer for their specific return policy regarding returns. INSTRUCTION MANUAL The second option is to take or send the product (prepaid) to a MaxxDry™ authorized service center for repair or replacement at our discretion. Proof of purchase, store name and date of purchase may be required. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the service center. This product is not intended for commercial BEFORE RETURNING THIS PRODUCT use. FOR ANY REASON PLEASE CALL THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY: 1-888-330-9452 - Any modification to MaxxDrySD™ - Product has been misused or improperly cared for - Products over Thirty (30) year from date of original purchase IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE - Warranty request without original receipt ™ - Repairs done by anyone other than MaxxDry™ or a MaxxDry™ authorized repair facility A PROBLEM WITH YOUR MaxxDry PRODUCT In consideration of the above promises by MaxxDry™, the buyer agrees to and accepts the following conditions: CALL 1-888-330-9452 1. That this warranty is in lieu of all other warranties, expressed or implied. 2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED OR WAIVED. Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the 3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from MaxxDry™ provided any outside of the product box and the store receipt with purchase date. In most cases, a MaxxDry™ representative can resolve the problem and all warranty defects fall within the warranty period and meets all warranty provisions. over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please send 4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise, which the buyer may them via email to: [email protected]. Your feedback is vital to MaxxDry™. have against MaxxDry™. SAVE THIS MANUAL FOR FUTURE REFERENCE

MaxxDry.com September 2012 MaxxDry.com