9930 Plank a Boat Framework

9930 version 5 Page 1 of 4 Plank a boat framework

Level 4

Credits 20

Purpose People credited with this unit standard are able to: select planking materials; prepare timber for fitting and fixing; fit and fix timber to a framework; and make planking watertight.

Subfield Boating Industries

Domain Boatbuilding

Status Registered

Status date 7 May 1997

Date version published 17 October 2008

Planned review date 31 December 2010

Entry information Open.

Accreditation Evaluation of documentation and visit by NZQA and industry.

Standard setting body (SSB) Boating Industry Training Organisation

Accreditation and Moderation Action Plan (AMAP) reference 0136 This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Special notes

1 The credit value of this unit standard has been calculated on the basis that people seeking credit have acquired competence in the use of relevant hand and power tools.

2 Evidence of the elements of this unit standard may be presented across the following contexts: planking systems – carvel, clinker, double diagonal, triple planking.

Ó New Zealand Qualifications Authority 2018 9930 version 5 Page 2 of 4

3 The following apply to the performance of all elements of this unit standard: a All required equipment must be set up, started up, operated, and shut down in accordance with company procedures. b All work practices must meet recognised codes of practice and documented worksite health and safety procedures (where these exceed code) for personal, product, and worksite health and safety, and must meet the obligations required under the Health and Safety in Employment Act 1992, and subsequent and delegated legislation. c All work practices must meet recognised codes of practice and documented worksite environmental procedures (where these exceed code) for personal, product, and worksite environmental matters, and must meet the obligations required under the Resource Management Act 1991, and subsequent and delegated legislation. d All work practices must meet documented worksite quality management requirements. These include documentation of activities, events, and decisions.

4 This unit standard can be assessed on job.

Elements and performance criteria

Element 1

Select planking materials.

Range timber, fastenings.

Performance criteria

1.1 Timber is selected to meet job requirements.

Range requirements – moisture content, species, dimensions, defects.

1.2 Fastenings are selected to meet job requirements.

Range adhesives, nails, screws, staples, rivets, rooves, dowels, bolts.

Element 2

Prepare timber for fitting and fixing.

2.1 Timber is cut to size so that it can be fixed to frames in accordance with job requirements, and fair lines can be achieved to design requirements.

2.2 Timber pieces are pre-shaped in accordance with job requirements for jointing to adjacent pieces.

Range jointing – scarving, spiling, butt strapping.

2.3 Timber is pre-coated to job requirements.

Range sealing, priming.

Element 3

Fit and fix timber to a framework.

3.1 Framework is faired to job specifications and tolerances for fair lines.

3.2 Timber is fitted and fixed in accordance with job requirements for fastening type and location.

Range fastenings – adhesives, nails, screws, staples, rivets, rooves, dowels, bolts.

3.3 All joint surfaces are in contact with each other.

3.4 Timber is fitted and fixed to relieve all stress that could potentially open up the joints.

Element 4

Make planking watertight.

Range by caulking or gluing.

4.1 Materials are selected and prepared in accordance with job requirements and manufacturer’s specifications and instructions.

4.2 Materials are applied to job requirements and in accordance with manufacturer’s specifications and instructions.

4.3 Water tightness is established using visual methods.

Please note

Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards.

Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Boating Industry Training Organisation [email protected] if you wish to suggest changes to the content of this unit standard.

Ó New Zealand Qualifications Authority 2018