ASTM F-03 Committee on Gaskets

Form cog-1 ASTM F03 Committee on Gaskets Revised May 15, 2006 EXECUTIVE COMMITTEE Yr Member Phone FAX E-Mail Chairman 01 N. Burkhart 937-498-2222 937-498-7544 [email protected] Executive Vice-Chairman 01 A. Bausman 423-229-6059 423-229-8379 [email protected] Administrative Vice-Chairman 01 D. Monroe 205-591-5632 205-595-9119 [email protected] Recording Secretary 01 J. Lingenfelder 713-467-1316 713-467-1326 [email protected] Membership Secretary 01 J. Jamalyaria 281-604-2456 281-604-2415 [email protected] Staff Manager 01 J. Hugo 610-832-9740 610-832-9666 [email protected] Administrative Assistant 01 L. Drennen 610-832-9735 610-832-9666 [email protected]

Jill Di Cicco

610-832-9734

610-832-9666 [email protected] ADMINISTRATIVE SUBCOMMITTEES & TASK GROUPS Yr Member Phone FAX E-Mail F-3.90 Executive 01 N. Burkhart 937-498-2222 937-498-7544 [email protected] F-3.90.01 Historical 96 M. Passarella 614-459-5104 614-538-9202 [email protected] F-3.90.02 Website 98 A. Bausman 423-229-6059 423-229-8379 [email protected] F-3.91 Administrative 99 D. Monroe 205-591-5632 205-595-9119 [email protected] F-3.92 Meeting & Liaison Activities 98 A. Bausman 423-229-6059 423-229-8379 [email protected] F-3.94 Terminology (F118) 00 C. Armellini 215-737-0530 215-737-7500 [email protected] F-3.95 Planning 98 R. Dickerman 313-653-5624 313-653-5636 [email protected] F-3.95.01 Industrial Gasketing 96 J. Lingenfelder 713-467-1316 713-467-1326 [email protected] F-3.95.02 Transportation Gasketing 01 S. Bond 847-568-2387 847-568-1917 [email protected] F-3.95.03 Mat’l characterization (FEA) 01 P. Petrunich 864-234-6626 864-675-0747 [email protected] F-3.96 SCGI/International 96 N. Burkhart 937-498-2222 937-498-7544 [email protected] F-3.97 Awards 00 J. Payne 908-876-4017 908-876-4017 [email protected] F-3.99 Statistics 00 M. Pollock 216-529-3902 216-529-3888 [email protected] TECHNICAL SUBCOMMITTEES & TASK GROUPS Yr Member Phone FAX E-Mail F-3.10 Composite Gaskets 98 D. Guimond 508-668-0295 508-668-6526 [email protected] F-3.10.03 Heat Transfer (F433) M. Pollock 216-529-3902 216-529-3888 [email protected] F-3.10.06 Sealability (F37, F112, F2378) M. Pollock 216-529-3902 216-529-3888 [email protected] F-3.10.07 Enveloped Gaskets (F336) J. Staples 716-247-6509 F-3.10.08 Coated Metal Gaskets R. Bratcher 262-862-2311 [email protected] F-3.20 Mechanical Test Methods 99 N. Migneault 613-966-1442 613-966-1572 [email protected] F-3.20.01 Creep Relaxation (F38 & F1276) D. Guimond 508-668-0295 508-668-8082 [email protected] F-3.20.02 Flat Faced Joint Assemblies (F145) M. Moser 717-396-5220 717-396-4119 [email protected] F-3.20.03 Compressibility (F36 & F806) D. Guimond 508-668-0295 508-668-8082 [email protected] F-3.20.04 Tension Testing (F152) J. Jamalyaria 281-604-2456 281-604-2415 [email protected] F-3.20.07 Blow-out Testing (F434) J. Staples 716-247-6509 F-3.20.09 Compressive Strength (F1574) N. Burkhart 937-498-2222 937-498-7544 [email protected] F-3.20.10 Dimensional Stability (F1087) D. Guimond (tent.) 508-668-0295 508-668-8082 [email protected] F-3.20.12 Flexibility (F147) N. Migneault 613-966-1442 613-966-1572 [email protected] F-3.20.16 Density (F1315) D. Guimond (tent.) 508-668-0295 508-668-8082 [email protected] F-3.20.19 Load Compression Curves K. Kolb 409-552-8832 409-560-8993 [email protected] F-3.20.20 Dyn. Spring Rate of Gasket Materials S. Bond 847-568-2387 847-568-1917 [email protected] F-3.20.21 Hot Blow-Out Performance A. Bausman 423-229-6059 423-229-8379 [email protected] F-3.20.22 Bolted Flange Joint Assembly E. Hayman 281-383-2600 F-3.20.23 Thermal expansion J. Payne 908-876-4017 908-876-4017 [email protected] F-3.20.24 HOMT A. Bausman 423-229-6059 423-229-8379 [email protected] F-3.30 Classification 98 J. Hollern 717-295-3400 717-295-3414 [email protected] F-3.30.01 Standard Classification (F104) J. Lingenfelder 713-467-1316 713-467-1326 [email protected] F-3.30.02 Classification of Composites (F868) M. Pollock 216-529-3902 216-529-3888 [email protected] F-3.30.03 Classification of FIP Gaskets J. Beckett 586-492-2265 586-575-2732 [email protected] F-3.30.04 Classification of MLS Gaskets R. Bratcher 262-862-2311 [email protected] F-3.40 Chemical Test Methods 98 D. Burgess 315-597-3386 800-543-0598 [email protected] F-3.40.05 Adhesion (F607) D. Guimond 508-668-0295 508-668-8082 [email protected] F-3.40.06 Fluid Resistance (F146) D. Guimond (tent.) 508-668-0295 508-668-8082 [email protected] F-3.40.09 Hot Compression Test J. Lingenfelder 713-467-1316 713-467-1326 [email protected] F-3.40.10 High Temp. Long Term Performance J. Payne 908-876-4017 908-876-4017 [email protected] F-3.40.14 High Temperature Effects (F495) R. Deegan 613-966-1442 613-966-1572 F-3.40.15 Corrosion Testing (F363) J. Staples 716-247-6509 F-3.40.21 Gasket Design Constants J. Payne 908-876-4017 908-876-4017 [email protected] F-3.40.22 Binder Durability (F148)/cork-rubber R. Bratcher 262-862-2311 [email protected] F-3.40.23 FSA Steam Test (Format to ASTM F03) N. Migeault 613-966-1442 613-966-1572 [email protected] F-3.50 Analytical Test Methods 01 N. Burkhart 937-498-2222 937-498-7544 [email protected] F-3.50.01 Thermal Analysis Inactive F-3.50.02 Leachable Chlorides (F1277) Vacant F-3.50.03 Volatility Vacant F-3.60 Specifications 98 A. Bausman 423-229-6059 423-229-8379 [email protected] F-3.60.01 Pail & Drum Gaskets (F1909) W. Healey 860-564-3321 860-564-5690 F-3.60.02 Fiber Gaskets for Process Plants J. Lingenfelder 713-467-1316 713-467-1326 [email protected] F-3.60.03 Graphite Gaskets for Process Plants M. Pollock 216-529-3902 216-529-3888 [email protected] F-3.60.04 PTFE Gaskets for Process Plants A. Bausman 423-229-6059 423-229-8379 [email protected] F-3.70 Formed-in-Place (solid/liquid) R. Dickerman 313-653-5624 313-653-5636 [email protected]

Word doc. C:\myfiles\astmf03structure