Copy the LICENSE

Cole•Layer•Trumble Company

Landisc™ Enterprise Edition

Standard Version

Installation Guide

July 2, 2003

All rights reserved. No part of this document may be used or reproduced in any form or by any means, or stored in a database or retrieval system, without prior written permission of the copyright owner. For information, address Cole•Layer•Trumble Company, 3199 Klepinger Road, Dayton, Ohio 45406 or e-mail [email protected].

This document is provided as is, without warranty of any kind either expressed or implied, respecting the contents of this document, including but not limited to implied warranties for the document's quality, performance, merchantability, or fitness for any particular purpose. Cole•Layer•Trumble Company shall not be liable for to the purchaser or any other person or entity with respect to any liability, loss, or damage caused or alleged to be caused directly or indirectly by this document.

Information in this document, including pricing, is subject to change without notice and does not represent a commitment on the part of Cole•Layer•Trumble Company. The software described in this document is furnished under a license agreement.

Trademarks: All brand names and product names used in this document are trade names, trademarks, or registered trademarks of their respective owners.

Table of contents

1. LANDISC CONFIGURATION WORKSHEET 1 2. MAP THE COMMON DRIVE LETTER TO THE PROJECT'S SHARE DIRECTORY: 2 3. COPY THE “LANDISC EE SETUP.EXE” APPLICATION TO THE ROOT OF THE PROJECT’S SHARE LOCATION: 3 4. COPY THE LICENSE.DBF TO THE PROJECT’S DIRECTORY, IF IT DOESN’T ALREADY EXIST OR HAS BEEN UPDATED: 4 5. LAUNCH “LANDISC EE SETUP.EXE” AND THEN SELECT NEXT: 5

5.1. THERE ARE 4 TYPES OF INSTALLATIONS. EACH ONE IS BASED ON THE ROLE OF THE WORKSTATION: 5 5.1.1. Landisc Administrator workstation: 5 5.1.2. Landisc Master Collector workstation. 5 5.1.3. Landisc Image Collector workstation. 6 5.1.4. Landisc Image Distribution workstation. 6 5.2. NOTES: 6 6. LANDISC ADMINISTRATOR WORKSTATION INSTALLATION: 7

6.1. SELECT ADMINISTRATOR AND THEN SELECT NEXT: 7 6.2. DOUBLE CLICK THE LANDISC ADMINISTRATOR ICON ON THE DESKTOP: 8 6.3. SELECT FILE|OPTIONS FROM THE MENU: 8 6.4. THE LANDISC ADMINISTRATOR NEEDS TO ‘POINT’ TO YOUR PROJECT’S LANDISC DATABASE. 9 6.4.1. Click the button with the magnifying glass: 9 6.4.2. Select CREATE PROJECT: 10 6.4.3. Enter your project name and select OK: 10 6.4.4. Select the directory where your project is located and select OK: 11 6.5. AFTER YOU RETURN BACK TO THE OPTIONS WINDOW, YOUR PROJECT LOCATION INFORMATION WILL BE SHOWN. 12 6.6. CLOSE THE OPTIONS WINDOW BY CLICKING THE BUTTON WITH THE DOOR: 12 6.7. NOW CLOSE THE APPLICATION BY SELECTING FILE|EXIT FROM THE MENU: 13 6.8. DOUBLE CLICK THE LANDISC MAINTENANCE SYSTEM ICON ON THE DESKTOP: 13 6.9. SELECT FILE|OPTIONS FROM THE MENU: 14 6.10. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 14 6.11. SELECT YOUR PROJECT NAME: 15 6.12. AFTER YOU RETURN BACK TO THE OPTIONS WINDOW, YOUR PROJECT LOCATION INFORMATION WILL BE SHOWN. 15 6.13. CLOSE THE OPTIONS WINDOW BY CLICKING THE BUTTON WITH THE DOOR: 16 6.14. NOW CLOSE THE APPLICATION BY SELECTING FILE|EXIT FROM THE MENU: 16 6.15. DOUBLE CLICK THE LANDISC IMAGE LOADER ICON ON THE DESKTOP: 16 6.16. SELECT FILE|OPTIONS FROM THE MENU: 17 6.17. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 18 6.18. SELECT YOUR PROJECT NAME: 18 6.19. AFTER YOU RETURN BACK TO THE OPTIONS WINDOW, YOUR PROJECT LOCATION INFORMATION WILL BE SHOWN. 18 6.20. CLOSE THE OPTIONS WINDOW BY CLICKING THE BUTTON WITH THE DOOR: 19 6.21. NOW CLOSE THE APPLICATION BY SELECTING FILE|EXIT FROM THE MENU: 19 7. LANDISC MASTER COLLECTOR WORKSTATION INSTALLATION: 20

7.1. SELECT MASTER COLLECTION AND THEN SELECT NEXT: 20 7.2. DOUBLE CLICK THE LANDISC MAINTENANCE SYSTEM ICON ON THE DESKTOP: 21 7.3. SELECT FILE|OPTIONS FROM THE MENU: 22 7.4. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 23

i 7.5. THE LANDISC MAINTENANCE SYSTEM NEEDS TO ‘POINT’ TO YOUR PROJECT’S LANDISC DATABASE. 23 7.6. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 23 7.7. SELECT CREATE PROJECT: 24 7.8. ENTER YOUR PROJECT NAME AND SELECT OK: 24 7.9. SELECT THE DIRECTORY WHERE YOUR PROJECT IS LOCATED AND SELECT OK: 25 7.10. AFTER YOU RETURN BACK TO THE OPTIONS WINDOW, YOUR PROJECT LOCATION INFORMATION WILL BE SHOWN. 25 7.11. CLOSE THE OPTIONS WINDOW BY CLICKING THE BUTTON WITH THE DOOR: 26 7.12. NOW CLOSE THE APPLICATION BY SELECTING FILE|EXIT FROM THE MENU: 26 7.13. DOUBLE CLICK THE LANDISC IMAGE LOADER ICON ON THE DESKTOP: 26 7.14. SELECT FILE|OPTIONS FROM THE MENU: 27 7.15. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 28 7.16. SELECT YOUR PROJECT NAME: 28 7.17. AFTER YOU RETURN BACK TO THE OPTIONS WINDOW, YOUR PROJECT LOCATION INFORMATION WILL BE SHOWN. 28 7.18. CLOSE THE OPTIONS WINDOW BY CLICKING THE BUTTON WITH THE DOOR: 29 7.19. NOW CLOSE THE APPLICATION BY SELECTING FILE|EXIT FROM THE MENU: 29 8. LANDISC IMAGE COLLECTOR WORKSTATION INSTALLATION: 30

8.1. SELECT IMAGE COLLECTION AND THEN SELECT NEXT: 30 8.2. DOUBLE CLICK THE LANDISC IMAGE LOADER ICON ON THE DESKTOP: 31 8.3. SELECT FILE|OPTIONS FROM THE MENU: 32 8.4. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 32 8.5. THE LANDISC IMAGE LOADER NEEDS TO ‘POINT’ TO YOUR PROJECT’S LANDISC DATABASE. 32 8.6. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 33 8.7. SELECT CREATE PROJECT: 33 8.8. ENTER YOUR PROJECT NAME AND SELECT OK: 33 8.9. SELECT THE DIRECTORY WHERE YOUR PROJECT IS LOCATED AND SELECT OK: 34 8.10. AFTER YOU RETURN BACK TO THE OPTIONS WINDOW, YOUR PROJECT LOCATION INFORMATION WILL BE SHOWN. 34 8.11. CLOSE THE OPTIONS WINDOW BY CLICKING THE BUTTON WITH THE DOOR: 34 8.12. NOW CLOSE THE APPLICATION BY SELECTING FILE|EXIT FROM THE MENU: 35 9. LANDISC IMAGE DISTRIBUTION WORKSTATION INSTALLATION: 36

9.1. SELECT IMAGE DISTRIBUTION AND THEN SELECT NEXT: 36 9.2. DOUBLE CLICK THE LANDISC IMAGE VIEWER ICON ON THE DESKTOP: 37 9.3. SELECT FILE|OPTIONS FROM THE MENU: 38 9.4. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 38 9.5. THE LANDISC IMAGE VIEWER NEEDS TO ‘POINT’ TO YOUR PROJECT’S LANDISC DATABASE. 38 9.6. CLICK THE BUTTON WITH THE MAGNIFYING GLASS: 39 9.7. SELECT CREATE PROJECT: 39 9.8. ENTER YOUR PROJECT NAME AND SELECT OK: 39 9.9. SELECT THE DIRECTORY WHERE YOUR PROJECT IS LOCATED AND SELECT OK: 40 9.10. AFTER YOU RETURN BACK TO THE OPTIONS WINDOW, YOUR PROJECT LOCATION INFORMATION WILL BE SHOWN. 40 9.11. CLOSE THE OPTIONS WINDOW BY CLICKING THE BUTTON WITH THE DOOR: 40 9.12. NOW CLOSE THE APPLICATION BY SELECTING FILE|EXIT FROM THE MENU: 41

ii 1. LANDISC CONFIGURATION WORKSHEET

 Common Network Drive Letter:______

 Project UNC/Share:______

 Project Directory:______

 Project Name: ______

The Common Network Drive Letter must be the same as the network drive letter that Landisc was installed into on the Server. Every workstation must use this same drive letter.

The Project UNC/Share is the computer name and shared location of the Landisc Server where the project is located. An example is “\\landisc-server\landisc”, where “\\landisc-server” is the computer name of the Landisc Server, and “\landisc” is the name of the shared location where the Landisc project exists.

The Project Directory is the drilled down path to the Landisc Project.

The Project Name is the designated name of the Landisc Project. Every workstation must use the same project name. There are no exceptions.

Universal Naming Convention (UNC): A naming convention for files that provides a machine-independent means of locating the file. A UNC name will usually include a reference to a shared location accessible over a network rather than specified by a drive letter and path.

1 2. MAP THE COMMON DRIVE LETTER TO THE PROJECT'S SHARE DIRECTORY:

Be sure to select ‘Reconnect at logon’:

2 3. COPY THE “LANDISC EE SETUP.EXE” APPLICATION TO THE ROOT OF THE PROJECT’S SHARE LOCATION:

3 4. COPY THE LICENSE.DBF TO THE PROJECT’S DIRECTORY, IF IT DOESN’T ALREADY EXIST OR HAS BEEN UPDATED:

If needed, the “read only” attribute will need to be turned off:

4 5. LAUNCH “LANDISC EE SETUP.EXE” AND THEN SELECT NEXT:

5.1. There are 4 types of installations. Each one is based on the role of the workstation:

5.1.1. Landisc Administrator workstation: The primary function is to perform housekeeping and administration of Landisc. Generally, there will only be one workstation designated and possibly an alternate. The selection will install the Landisc Administrator, Landisc Maintenance System, and the Landisc Image Loader

5.1.2. Landisc Master Collector workstation. The primary function is to perform parcel maintenance of Landisc. Generally, these workstations will have a role as a team leader. The selection will install the Landisc Maintenance System, and the Landisc Image Loader

5 5.1.3. Landisc Image Collector workstation. The primary function is parcel image viewing and/or loading. The selection will only install the Landisc Image Loader

5.1.4. Landisc Image Distribution workstation. The primary function is parcel image viewing only. The selection will only install the Landisc Image Loader

5.2. NOTES: After your selection of the type of workstation, Landisc EE will be installed and icons for all installed Landisc EE applications will appear on the desktop.

Based on some of the Windows drivers, you may be required to restart Windows at this time.

ALL Landisc EE applications will default to our test project Newtown. To set the project to your project:

6 6. LANDISC ADMINISTRATOR WORKSTATION INSTALLATION:

6.1. Select Administrator and then select Next:

7 6.2. Double click the Landisc Administrator icon on the desktop:

6.3. Select FILE|OPTIONS from the menu:

8 6.4. The Landisc Administrator needs to ‘point’ to your project’s Landisc database.

6.4.1. Click the button with the magnifying glass:

9 6.4.2. Select CREATE PROJECT:

6.4.3. Enter your project name and select OK:

10 6.4.4. Select the directory where your project is located and select OK:

11 6.5. After you return back to the options window, your project location information will be shown.

6.6. Close the OPTIONS window by clicking the button with the door:

12 6.7. Now close the application by selecting FILE|EXIT from the menu:

6.8. Double click the Landisc Maintenance System icon on the desktop:

13 6.9. Select FILE|OPTIONS from the menu:

6.10. Click the button with the magnifying glass:

14 6.11. Select your project name:

6.12. After you return back to the options window, your project location information will be shown.

15 6.13. Close the OPTIONS window by clicking the button with the door:

6.14. Now close the application by selecting FILE|EXIT from the menu:

6.15. Double click the Landisc Image Loader icon on the desktop:

17 6.17. Click the button with the magnifying glass:

6.18. Select your project name:

19 7. LANDISC MASTER COLLECTOR WORKSTATION INSTALLATION:

7.1. Select Master Collection and then select Next:

20 7.2. Double click the Landisc Maintenance System icon on the desktop:

7.5. The Landisc Maintenance System needs to ‘point’ to your project’s Landisc database.

23 7.7. Select CREATE PROJECT:

7.8. Enter your project name and select OK:

24 7.9. Select the directory where your project is located and select OK:

7.13. Double click the Landisc Image Loader icon on the desktop:

7.16. Select your project name:

29 8. LANDISC IMAGE COLLECTOR WORKSTATION INSTALLATION:

8.1. Select Image Collection and then select Next:

30 8.2. Double click the Landisc Image Loader icon on the desktop:

8.5. The Landisc Image Loader needs to ‘point’ to your project’s Landisc database.

8.7. Select CREATE PROJECT:

35 9. LANDISC IMAGE DISTRIBUTION WORKSTATION INSTALLATION:

9.1. Select Image Distribution and then select Next:

36 9.2. Double click the Landisc Image Viewer icon on the desktop:

9.5. The Landisc Image Viewer needs to ‘point’ to your project’s Landisc database.

9.7. Select CREATE PROJECT: