LIMITED LIABILITY COMPANY « BROVARY – PLASTMASS»

13, Vokzalnaya st., Borispol, Kiev region, Ukraine 08304 tel. (044) 592-07-73; (044)451-70-90; tel./ fax (04595) 7-25-65 E-mai: [email protected] WWW: Plastmasss.com.ua

Dear Sirs!

LLC "Brovary Plastmass" invites You for cooperation in the sphere of polymeric pipes.

Out plant is located on the territory of Ukraine, Borispol, Kiev region. Web site of our enterprise: [email protected] (English version is available ) Enterprise LLC "Brovary-Plastmass» was founded in November 2001. For this period our firm has grown up from the dealer of well-known foreign and domestic enterprises to independent manufacturer of polymeric pipes. Main areas of acitivity - “water supply and sewage». Thanks to the use of new foreign equipment and trendsetting technologies polymeric pipes of LLC "Brovary-Plastmass» are considerably superior to domestic counterparts concerning quality and not worse than the world's leading manufacturers. Currently there are five working technological catenary lines with total annual capacity 8,5 thous. tonnes. Our enterprise also has own testing laboratory certified by Ukraine GosStandart. All our products have state registration certificate and corresponding certificates of Russian Federation, certifictaes of Belarus and Ukraine. Output products are certified according to ISO 9001:2009 (ISO 9001:2008).

The list of our products:

1. Two-layered fluted polymeric pipes for outdoor sewerage (POLYCORR). Polymeric pipes corresponds to the requirements of European standard project EN 1401-1; 1999, material for pipes production - block-copolymer polypropylene PP – of leading European manufacturers BASELL,ТVК. Nominal bore D 200, 300, 400, 500, 600, 800, «В» type of tube, circular rigidity SN4, SN8,SN16. Pipes are produced by means of continuos extrusion method, have double closed structure of wall. The smooth inner surface and the corrugated outer wall. Pipes are connected by means of flayers, produced on the pipes during production process. The color of standard pipes and molded pieces for sewerage -ginger, the color of inner walls of pipes - white. PP pipes are designed for nonramming underground systems of public sanitary and storm water drainage.

2. Polyethylene pressure pipes PE-100 for sewerage systems. Polyethylene pressure pipes for sewerage are used for construction and repair of outdoor pipelines, transporting water of household and drinking supply. Leading raw suppliers are European manufacturers SABIK, TOTAL. Pipes are made of polyethylene PE 100 class and correspond to standard dimension ratio SDR 41 - SDR 6, with nominal diameters from 25 to 500 mm, including main working pressures 4; 6; 8; 10; 12,5; 16; 20 bar. Pipes, produced in linear segments, have the length 12 m (or another by agreement with the customer). Pipes with

diameter not more than 160 mm can be produced in hanks (cylinders) from 50 to 1000 m. Pipes with diameter up to 110 can be connected by means of mechanic (compression) fittings. Polyethylene pipes of major diameters are connected mainly by means of jam-weld or by means of thermistor fittings that requires special welding equipement. Such connection is monolithic and considered to be the most reliable.

3. Polypropylene casing pipes with connecting threads for the construction of water supply wells and also production wells. The sinking of wells using casing pipes allows to avoid groundwater pollution, and also increase the speed of sinking thanks to reduced diameter in comparison with usual steel pipes. Blue casing pipes for wells have the following diameters:

Pipe outer Type Wall Unit of Pipe diameter, thickness, measure length mm mm 110 R08 7.2 p/m 3; 5 118 R08 7.4 p/m 3; 5 125 R10 7.4 p/m 3; 5 130 R10 7.6 p/m 3; 5 140 R10 8.0 p/m 3; 5 Pipes are made of copolymere propylenes, which have better mechanical and ecological chracteristics than PVC pipes for wells.

Nowadays LLC "Brovary Plastmass" exports its products to Russia, Moldova, Georgia, Kazakhstan.

Best regards Director of LLC "Brovary Plastmass" Khavriuta V.F.

Contact telephone numbers: Mob. : + 38(067)658-56-94 Mob. : + 38(067)658-56-98 E-mail: export@ Plastmasss.com .ua