GPS Personal Tracker

(GPS+GSM+SMS/GPRS)

Model No.: T19G

Version 1.6

Quick Start Guide

(In order to get the correct installation and quick operation, please kindly read the installation guide before use. If there are any changes in product appearance and color, please in kind prevail.) 1. KEY/BUTTON pictures

- 1 - Product Features *GSM Quad-band global using worldwide *GPS continuous locating, GPRS report regularly *Support SMS query location information *Three SOS specific number can be set up for remote monitoring and alarm *Can realize remote voice monitoring function *Low battery alarm function

3. Appearance of the terminal

4. Technical parameters GSM Frequency 850/900/1800/1900MHZ GSM/GPS MTK6252/MTK3326 GPRS Class 12,TCP/IP build in GSM MODULE GPS sensitivity -159dBm GPS location accuracy 10m (2D RM)

- 2 - LBS location accuracy 50-200m Speed accuracy 0.1m/Second GPS cold start <38 second GPS warm start <32 second GPS hot start <2 second Maximum Elev 18,000m battery capacity 3.7V 450mA maximum speed 515m/second external dimension 38.0(L)x35.0(W)x15.0(H)mm Weight 15g Working temperature - 20°C - +70°C Working humidity 20%~80%RH voltage 4.2V Average standby current <10mA

5. Get ready for the use 5.1 Open the box, and check equipment model is correct, accessories is complete or not, otherwise, please contact your dealer. 5.2 SIM card choice, terminal need to insert a GSM SIM card, the choice of SIM card please refer the the opinion of dealer. Notice: Please use GSM Network SIM Card; Please power off before install or remove the SIM card; Terminal SIM card need to open the GPRS function; Terminal SIM card need to open the Caller Identification function.

5.3 Installation Instructions:

- 3 - 6. Working mode There are four work modes for this device: Mode 1 (Standard Mode) Terminal GPS work all the time, and upload data regularly .

Mode 2 (Power Saving Mode, defaults mode for the terminal) The terminal immediately report data after GPS positioning, and then go to sleep situation. 10 minutes (The Minimum time of this mode is 5 minutes) later Automatic open GPS. Such a cycle working (If not position successfully will upload base station location data, and need platform to support)

Mode 3 (Base Station Location Mode) GPS do not work, gain base station positioning data and report (Need platform to support)

- 4 - GPS will be wake up when Centre number dial in or send SMS to the terminal, working 2 minutes and then sleep. Mode 4 (No Platform Mode, The Minimum Power Consumption) This mode do not need platform, only reply in the use of url# SMS command queries google the map link. Change Working mode commands are: m1,20# m2,620# m3,20# m4# Instructions described: m1 is Mode 1, 20 is upload interval time. The upload interval time of Mode 1 and Mode 3 are 10- 65535 Seconds. The upload interval time of Mode 2 is 300-65535 Seconds. (Details about the upload interval please check command sheet)

7. Terminal operation 7.1 LED and device screen display declaration

TKW19G screen display declaration

Label declaration

It means GPS module has been opened, but did not locate (if the position without any display indicates the GPS module does not open) It means GPS module has been opened and located (if the position without any display indicates the GPS module is not open) It means GSM signal strength, divided into 0, 1, 2, 3, 4.

It means no SIM card inserted

It means battery level, divided into 1, 2, 3 levels

It means power on charging status

It means power off charging status

It means power off charging full status

SOS It means SOS dial-up state

LED flashing instructions

Meaning flashing

GPS module shut down GPS lights turn off

GPS module has been opened, but not locate GPS lamp flashes per second

GPS module has been opened and located GPS lamp always ON

GSM not registered to the network GSM lamp flashes per second

GSM registered to the network GSM lamp flashes every five second

GPRS log in to the platform GSM lamp turn off

GPRS sending datas GSM lamp flashes every 50ms second

Rechargeable light effect Lamp of GPS and GSM lamp alternating flashing,

- 5 - recovery work light showing after charging full

Shutdown lighting GPS and GSM lights are all OFF

Remote upgrade GPS and GSM two lights are normal ON, both are OFF after the upgrade.

7.2 Power ON/OFF Power ON: Insert effective SlM Card to the terminal. Long press the power switch, power on status please see "light indication".

Power OFF: When power on, turn off the terminal power switch. Terminal will be power off in soon. As long as effective SlM CARD be inserted in terminal(GPRS function is opened already), it will be normally working after startup. Terminal will upload the location information to server as the time interval setting. GPS working period, the terminal will upload the location data regularly to server.

7.3 SOS call for help and remove the alarm When in an emergency need for help, press the SOS button for more than 3 seconds long, will trigger SOS emergency alarm for help. Terminal will loop calling pre-set three numbers, under the condition of no one answered, maximum circulation call twice. At SOS information to the platform, also can use platform issued instructions to remove alarm or edit text SMS alarm# to remove alarm. Note: Phone alarm function should be set up SOS specific number first !

7.4 Low battery alarm Battery level divided into 4 levels, when the power level is less than or equal to 1, the device will send SMS a low power alarm to the center number.

8. Online checking global service platform Service platform webpage: http://www.track188.com If you already have a log in account information in the platform, you can directly login the server. Otherwise, please contact your dealer and ask them to open the accounts for you. Provide login account and password. Enter the user login platform, fill in the access to log in to your account and password are presented after entering the service platform. As for the operating instructions of the service platform please contact your dealer to get "service platform operation guide".

9. Troubleshooting 1, The terminal for the first time boot unable to connect to the server, server show offline. Please check: 1) If the SIM card is properly installed, please refer to installation instructions. 2)Check the LED indicator light condition, when it’s normal,GSM status indicator bright every 0.1 seconds and go out for 2 seconds, GPS status indicator bright every

- 6 - 0.1 seconds and go out for 2 seconds. 3)Check if the GPS is located successful or not, if not please go to the outdoor at open air place to locate for the first time.

2, If the terminal show offline on server First observation if the 2 indicator lights of the equipment is normal, first check the status of a card, the steps are as follows: 1) The SIM card is overdue bills 2) Whether GPRS business was canceled (at the end of each month date offline). 3) Check the parameter setting of the device. Check the equipment serial number, GPRS transmission time interval is correct or not.

- 7 - Comparison List of GPS Watch Tracker commands (Model: T19G) Note: 1, All commands as below are by SMS. (default device password: 123456) 2, All the commands letter in lower case format. 3, All the setting or checking commands will be replied with related content by SMS. 4, If successful, it will reply: Set successfully! If not you need to re-set it. Settings as below: Commands Example 1 Center Number pw,device pw,123456,center, 13621925935# password,center,num ber# 2 Slave Number pw,device pw,123456,slave, 13621925935# password,slave,num bers# 3 Delete 1.pw,device pw,123456,center, d# Center Number password,center,d# 2.pw,device password,slave,d# 4 SOS Number 1.sos1,numbers# 1.sos1, 13621925935# Setting 2.sos2,numbers# 2.sos2, 13621925935# 3.sos3,numbers# 3.sos3,13800138000# 5 Delete SOS 1.sos1# 1.sos1# Number 2.sos2# 2.sos2# 3.sos3# 3.sos3# 6 APN Setting apn,apn name,,,# 1.apn,cmnet,,,# apn,cmnet 7 Server Setting ip,IP Adress,port,Port ip,115.29.228.122,port,7018# Number# 8 Work Mode 1: m1,t# (GPS has 1. m1,20# Setting been working) 2. m2,600# 2: m2,t# (Power 3. m3,120# Saving Mode) 4. m4# 3: m3,t# (LBS Mode) 4, m4# (Disable GPRS Mode) (”t” GPRS upload time interval) 9 Reboot Device reset# reset# 10 Modify User pw,New Password( 6 pw,888888# Password digits)# 11 GPRS upload time upload,t# upload,300# interval setting 15

Checking 15 Location url# url# checking Feedback: (Get location:Course:000,Speed:000.00,2013-09- Google 30 02:58:21, http://maps.google.com/maps? Map link) q=N22.540062,E114.077652 16 Address Where# The device will reply you a address,if not will tracking reply you”unable to get GPS data correctly, pls try again!” This function need support by platform 17 Check test# Feedback: parameter id:1308080030 ip:124.232.150.158 - 8 port:9500- AGPS:9 GPS:3 GPS fixed:0