2010 CE & ISO Seminar Agenda

Presented by IMCI and NMMA

March 15 ÷ 17, 2010 Sheraton Tampa Riverwalk Tampa, Florida

Times and Agenda Subject to Change

Monday, March 15, 2010

(Sessions through 5 pm are intended for those completely new to transporting to the EU and members new to CE Certification.)

Time/Location Subject Presenter

1:00 - 1:45 pm Welcome, seminar procedures, European Directives Tom Marhevko System explained by Blue Book, ISO standards, RSG Guidelines 1:45 - 2:45 pm News from the EU, EU market; Recreational Craft Ulrich Heinemann Directive (RCD) requirements today and tomorrow

2:45 - 3:00 pm Break

3:00 - 4:00 pm ISO Standards; CE Assessment Program Ulrich Heinemann

4:00 - 5:00 pm ABYC/IS0 Harmonized Requirements (not covered in Tom Marhevko other sessions)

5/19/2018 Tuesday, March 16, 2010 (Tuesday and Wednesday are intended for those both new to and experienced with CE Certification)

Time/Location Subject Presenter

8:00 - 8:30 Continental Breakfast

8:30 - 9:30 Free Quality Assurance System Tools through the IMCI Ulrich Manigel Application Forms, Checklists and Guided Application System (GAS)

9:30 - 10:00 Scantlings, basics of scantlings theory and the ISO Ulrich Heinemann approach to scantlings , overview of ISO 12215

10:00 - 10:15 Break

10:15 - 11:15 Scantlings, basics of scantlings Ulrich Heinemann

11:15 - 12:00 Craft Handling, ISO11591, ISO 11592 Ulrich Manigel

12:00 - 1:00 Lunch

Two – Track Breakout *Groups for breakout sessions will be assigned prior to session start Group A

Time Subject Presenter

1:00 - 2:00 Electricity, ISO 10133, ISO 13297, ISO 8846 Clyde Head

2:00 - 3:00 Cockpit, indoor workshop, ISO 11812 Ulrich Manigel

3:00 - 3:15 Break

3:15 - 4:00 Stability, power boats > 6m, Indoor workshop, ISO Michael Vollmer 12217-1

4:00 - 4:15 Break / Move to outdoor segment

4:15 - 4:45 Stability, power boats > 6m, Outdoor workshop, ISO Michael Vollmer 12217-1

4:45 - 5:30 Cockpit, outdoor workshop, ISO 11812 Ulrich Manigel

6:00 - 7:00 Happy Hour

5/19/2018 Group B

1:00 – 2.00 Engine and Fuel System Requirements, ISO 10088, ISO Denis Bonneau 11105, ISO15584, ISO 16147, ISO 21487

2.00 - 2:30 Man Overboard Prevention, ISO 15085 Steve Carrier

2:30 – 3:15 Openings, ISO9093, ISO 11812, ISO 12216 Marc Nugent

3:15 – 3:30 Break

3:30 – 4:15 Practical Applications, Q&A session based on photographs Ulrich Manigel shown of boats under assessment

4:15 – 4:45 Paperwork, ADCO list, DOC, builder’s plate, technical Ulrich Heinemann file, OM

4:45 – 5:30 Closing IMCI & NMMA procedures & contacts Ulrich Heinemann, Tom Marhevko 6:00 - 7:00 Happy Hour

5/19/2018 Wednesday, March 17, 2010 (Tuesday and Wednesday are intended for those both new to and experienced with CE Certification)

Group A

8:30 - 9:30 Engine and Fuel System Requirements, ISO 10088, ISO Denis Bonneau 11105, ISO15584, ISO 16147, ISO 21487

9:30 - 10:00 Man Overboard Prevention, ISO 15085 Steve Carrier

10:00 – 10:45 Openings, ISO9093, ISO 11812, ISO 12216 Marc Nugent

10:45 – 11:00 Break

11:00 – 11:45 Practical Applications, Q&A session based on photographs Ulrich Manigel shown of boats under assessment

11:45 – 12:15 Paperwork, ADCO list, DOC, builder’s plate, technical Ulrich Heinemann file, OM

12:15 – 1:00 Closing IMCI & NMMA procedures & contacts Ulrich Heinemann, Tom Marhevko

Group B

8:30 - 9:30 Electricity, ISO 10133, ISO 13297, ISO 8846 Clyde Head

9:30 - 10:30 Cockpit, indoor workshop, ISO 11812 Ulrich Manigel

10:30 - 10:45 Break

10:45 - 11:30 Stability, power boats > 6m, Indoor workshop, ISO Michael Vollmer 12217-1

11:30 - 11:45 Break / Move to outdoor segment

11:45 - 12:15 Stability, power boats > 6m, Outdoor workshop, ISO Michael Vollmer 12217-1

12:15 - 1:00 Cockpit, outdoor workshop, ISO 11812 Ulrich Manigel

5/19/2018