Dear Colleagues

Total Page:16

File Type:pdf, Size:1020Kb

Dear Colleagues Contents Part 1: Plenary Lectures The expanding role of applications in the development and validation of CFD at NASA D. M. Schuster .......…………………………………………….....…………………..………. Thermodynamically consistent systems of hyperbolic equations S. K. Godunov ...................................................................................................................................... Part 2: Keynote Lectures A brief history of shock-fitting M.D. Salas …………………………………………………………………....…..…………. Understanding aerodynamics using computers M.M. Hafez ……….............…………………………………………………………...…..………. Part 3: High-Order Methods A unifying discontinuous CPR formulation for the Navier-Stokes equations on mixed grids Z.J. Wang, H. Gao, T. Haga ………………………………………………………………................. Assessment of the spectral volume method on inviscid and viscous flows O. Chikhaoui, J. Gressier, G. Grondin .........……………………………………..............…..…. .... Runge–Kutta Discontinuous Galerkin method for multi–phase compressible flows V. Perrier, E. Franquet ..........…………………………………………..........………………..……... Energy stable WENO schemes of arbitrary order N.K. Yamaleev, M.H. Carpenter ……………………………………………………….............…… Part 4: Two-Phase Flow A hybrid method for two-phase flow simulations K. Dorogan, J.-M. Hérard, J.-P. Minier ……………………………………………..................…… HLLC-type Riemann solver for the Baer-Nunziato equations of compressible two-phase flow S.A. Tokareva, E.F. Toro ………………………………………………………………...........…… Parallel direct simulation Monte Carlo of two-phase gas-droplet laser plume expansion from the bottom of a cylindrical cavity into an ambient gas A.N. Volkov, G.M. O’Connor ………………………………………………................…........…… Study of a dispersed phase model for the simulation of a bubble column F. Sporleder, C.A. Dorao, H.A. Jakobsen ……………………………………………………. Application of invariant turbulence modeling of the density gradient correlation in the phase change model for steam generators Y. Obikane, S. Ikeo ………………………………………………………..............................… Part 5: Algorithms Reformulated Osher-type Riemann solver E.F. Toro, M. Dumbser …………………………………………………....................................… Entropy traces in Lagrangian and Eulerian calculations P.L. Roe, D.W. Zaide ………………………………………………………………….................. Automatic time step determination for enhancing robustness of implicit computational algorithms C. Lian, G. Xia, C.L. Merkle ………………………………………………..............................… Part 6: Boeing-Russia Cooperation Fifteen years of Boeing-Russia collaboration in CFD and turbulence modeling/simulation S.V. Kravchenko, P.R. Spalart, M.Kh. Strelets …………………………………………………. LES-based numerical system for noise prediction in complex jets M.L. Shur, A.V. Garbaruk, S.V. Kravchenko, P.R. Spalart, M.Kh. Strelets ………...……… Part 7: Discontinuous Galerkin Methods Local time-stepping for explicit Discontinuous Galerkin schemes G. Gassner, M. Dumbser, F. Hindenlang, C.-D. Munz ………………………………………………………...............................................................… Multi-dimensional limiting process for Discontinuous Galerkin methods on unstructured grids J.S. Park, C. Kim …………………………………………………........................................... Runge Kutta Discontinuous Galerkin to solve reactive flows G. Billet, J. Ryan …………………………………………………………................................. Comparison of the high-order compact difference and discontinuous Galerkin methods in computations of the incompressible flow A. Tyliszczak, M. Marek, A. Boguslawski …………………………………………………… On the boundary treatment for the compressible Navier-Stokes equations using high-order discontinuous Galerkin methods A. Richter, J. Stiller …………………………..………………………..................................…. Analytical and numerical investigation of the influence of artificial viscosity in Discontinuous Galerkin methods on an adjoint-based error estimator J. Schütz, G. May, S. Noelle ………………………………………………….............……… Part 8: Vortex Dynamics Analysis of a swept wind turbine blade using a hybrid Navier-Stokes/vortex-panel model K. Suzuki, S. Schmitz, J.-J. Chattot …………………………………………………………........ Using feature detection and Richardson extrapolation to guide adaptive mesh refinement for vortex-dominated flows S.J. Kamkar, A. Jameson, A.M. Wissink, V. Sankaran ………………………………………… Triple decomposition method for vortex identification in two-dimensional and three-dimensional flows V. Kolář, P. Moses, J. Šístek …………………………………………………………………….. Part 9: Design Optimization Multi-point optimization of wind turbine blades using helicoidal vortex model M. Wijnen, J.-J. Chattot ……………………………………………………..........................… Performance evaluation of the numerical flux Jacobians in flow solution and aerodynamic design optimization A. Ezertas, S. Eyi ……………………………………………………….........................…...…. Design optimization in non-equilibrium reacting flows S. Eyi, A. Ezertas, M. Yumusak, ………………………………………………………………. Shock control bump design optimization on natural laminar aerofoil D.S. Lee, J. Periaux, K. Srinivas, L.F. Gonzalez, N. Qin, E. Onate …………………………. Uncertainty analysis utilizing gradient and Hessian information M.P. Rumpfkeil, W. Yamazaki, D.J. Mavriplis ………………………………………………… Part 10: Interface Tracking Augmented Lagrangian / well-balanced finite volume method for compressible viscoplastic flows D. Bresch, E.D. Fernandez-Nieto, I. Ionescu, P. Vigneaux ………………………………… Stable simulation of shallow-water waves by block advection L.-W. Tan, V.H. Chu …........................……………………………………………………… Flood-waves simulation by classical method of consistent transport T. Wang, L.-W. Tan, V.H. Chu .......……………………………………………….....………… Part 11: Vehicles and Vortices Numerical simulation and control of the 3D flow around Ahmed body C.-H. Bruneau, E. Creusé, D. Depeyras, P. Gilliéron, I. Mortazavi …………………....……… Aerodynamic multiobjective design exploration of flapping wing using a Navier-Stokes solver Y. Yamazaki, A. Oyama, T. Nonomura, K. Fujii, M. Yamamoto ………………………………. Study into effects of vortex generators on a supercritical wing J. Huang, Z. Xiao, S. Fu …………………………………………………………………..........… Part 12: Turbulence Modeling Numerical simulation of the turbulent detached flow around a thick flat plate C. Tenaud, Y. Fraigneau, V. Daru ………………………………………………………………….. Progress in DES for wall-modelled LES of complex internal flows C. Mockett, F. Thiele …………………………………………………………….......................… Enhancement of the performance of the Partial-Averaged Navier-Stokes method by using scale-adaptive mesh generation B. Basara, Z. Pavlovic ………………………………………………………...........................… Scrutinizing second-moment closure model to turbulent flow unsteadiness R. Maduta, S. Jakirlic ………………………………………………………........................…… Part 13: Compressible Flow A stabilized finite element method for compressible turbulent flows C. Wervaecke, H. Beaugendre, B. Nkonga …………………………………....................……… Receptivity of hypersonic flow over blunt-noses to freestream disturbances using spectral methods K. Hejranfar, M. Najafi, V. Esfahanian ………………………………………………………… A numerical study of diffuser performance of gas dynamic laser system* S.D. Ravi, P.S. Kulkarni, N.K.S. Rajan ………………………………………..............…..……… Part 14: Bio-Fluid Mechanics Flow structures in physiological conduits A.M. Gambaruto, A. Sequeira …………..…………………………………...............................……. Fluid mechanics in aortic prostheses after a Bentall procedure M.D. de Tullio, L. Afferrante, M. Napolitano, G. Pascazio, R. Verzicco …………….................….. * A revised version of the paper is not available yet. Optimization of stents for cerebral aneurysm C.J. Lee, S. Townsend, K. Srinivas ……………………………………………………....…… Micron particle deposition in the nasal cavity using the ν2 -f model K. Inthavong, J. Tu, C. Heschl …………………………………………………………......….. Part 15: Meshing Technology Adjoint-based adaptive meshing in a shape trade study for rocket ascent M. Gusman, J. Housman, C. Kiris ………………………………………………………....…… Mesh quality effects on the accuracy of Euler and Navier-Stokes solutions on unstructured meshes A. Katz, V. Sankaran .................................................……………….....................………...…… Analysis of a RK/implicit smoother for multigrid R.C. Swanson, E. Turkel, S. Yaniv …………………………………...........…………………… Anisotropic adaptive technique for simulations of steady compressible flows on unstructured grids O. Feodoritova, D. Kamenetskii, S. Kravchenko, A. Martynov, S. Medvedev, V. Zhukov …….. Part 16: Aeroacoustics Euler - Navier-Stokes coupling for aeroacoustics problems M. Borrel, L. Halpern, J. Ryan ………………………………………………….......................……. Computational aeroacoustics on a small flute using a direct simulation Y. Obikane …………………………………………………………….........................................… An iterative procedure for the computation of acoustic fields given by retarded-potential integrals F. Margnat ………………………………………………………………………...........…………… Innovative tool for realistic cavity flow analysis: global stability F. Mery, G. Casalis ………………………………………………………....................................... Part 17: Large-Scale Computations Comparison of parallel preconditioners for a Newton-Krylov flow solver J.E. Hicken, M. Osusky, D.W. Zingg ………………………………………………........………… Large-scale CFD data compression for building-cube method using wavelet transform R. Sakai, D. Sasaki, K. Nakahashi …………………………………………………................…… Part 18: Euler Solvers A conservative coupling method for fluid-structure interaction in the compressible case L. Monasse, V. Daru, C. Mariotti,
Recommended publications
  • Family Name Given Name Presentation Title Session Code
    Family Name Given Name Presentation Title Session Code Abdoulaev Gassan Solving Optical Tomography Problem Using PDE-Constrained Optimization Method Poster P Acebron Juan Domain Decomposition Solution of Elliptic Boundary Value Problems via Monte Carlo and Quasi-Monte Carlo Methods Formulations2 C10 Adams Mark Ultrascalable Algebraic Multigrid Methods with Applications to Whole Bone Micro-Mechanics Problems Multigrid C7 Aitbayev Rakhim Convergence Analysis and Multilevel Preconditioners for a Quadrature Galerkin Approximation of a Biharmonic Problem Fourth-order & ElasticityC8 Anthonissen Martijn Convergence Analysis of the Local Defect Correction Method for 2D Convection-diffusion Equations Flows C3 Bacuta Constantin Partition of Unity Method on Nonmatching Grids for the Stokes Equations Applications1 C9 Bal Guillaume Some Convergence Results for the Parareal Algorithm Space-Time ParallelM5 Bank Randolph A Domain Decomposition Solver for a Parallel Adaptive Meshing Paradigm Plenary I6 Barbateu Mikael Construction of the Balancing Domain Decomposition Preconditioner for Nonlinear Elastodynamic Problems Balancing & FETIC4 Bavestrello Henri On Two Extensions of the FETI-DP Method to Constrained Linear Problems FETI & Neumann-NeumannM7 Berninger Heiko On Nonlinear Domain Decomposition Methods for Jumping Nonlinearities Heterogeneities C2 Bertoluzza Silvia The Fully Discrete Fat Boundary Method: Optimal Error Estimates Formulations2 C10 Biros George A Survey of Multilevel and Domain Decomposition Preconditioners for Inverse Problems in Time-dependent
    [Show full text]
  • Boundary Particle Method with High-Order Trefftz Functions
    Copyright © 2010 Tech Science Press CMC, vol.13, no.3, pp.201-217, 2010 Boundary Particle Method with High-Order Trefftz Functions Wen Chen1;2, Zhuo-Jia Fu1;3 and Qing-Hua Qin3 Abstract: This paper presents high-order Trefftz functions for some commonly used differential operators. These Trefftz functions are then used to construct boundary particle method for solving inhomogeneous problems with the boundary discretization only, i.e., no inner nodes and mesh are required in forming the final linear equation system. It should be mentioned that the presented Trefftz functions are nonsingular and avoids the singularity occurred in the fundamental solution and, in particular, have no problem-dependent parameter. Numerical experiments demonstrate the efficiency and accuracy of the present scheme in the solution of inhomogeneous problems. Keywords: High-order Trefftz functions, boundary particle method, inhomoge- neous problems, meshfree 1 Introduction Since the first paper on Trefftz method was presented by Trefftz (1926), its math- ematical theory was extensively studied by Herrera (1980) and many other re- searchers. In 1995 a special issue on Trefftz method, was published in the jour- nal of Advances in Engineering Software for celebrating its 70 years of develop- ment [Kamiya and Kita (1995)]. Qin (2000, 2005) presented an overview of the Trefftz finite element and its application in various engineering problems. The Trefftz method employs T-complete functions, which satisfies the governing dif- ferential operators and is widely applied to potential problems [Cheung, Jin and Zienkiewicz (1989)], two-dimensional elastic problems [Zielinski and Zienkiewicz (1985)], transient heat conduction [Jirousek and Qin (1996)], viscoelasticity prob- 1 Center for Numerical Simulation Software in Engineering and Sciences, Department of Engineer- ing Mechanics, Hohai University, Nanjing, Jiangsu, P.R.China 2 Corresponding author.
    [Show full text]
  • Numerische Untersuchung Der Akustischen Eigenschaften Von Trennenden Und flankierenden Bauteilen
    Braunschweiger Schriften zur Mechanik Nr. 64-2008 Numerische Untersuchung der akustischen Eigenschaften von trennenden und flankierenden Bauteilen von Dirk Clasen Institut für Angewandte Mechanik Technische Universität Braunschweig Herausgegeben vom Mechanik-Zentrum der Technischen Universität Braunschweig Schriftleiter: Prof. Dr. rer. nat. H. Antes Institut für Angewandte Mechanik Postfach 3329 38023 Braunschweig Tel.: 0531 / 391-7101 Fax: 0531 / 391-5843 Von der Fakultät Architektur, Bauingenieurwesen und Umweltwissenschaften der Technischen Universität Carolo-Wilhelmina zu Braunschweig zur Erlangung des Grades eines Doktor-Ingenieur (Dr.-Ing.) genehmigte Dissertation Tag der Einreichung: 27.06.2007 Tag der Prüfung: 14.04.2008 Berichter: Prof. Dr.–Ing. S. Langer Prof. Dr.–Ing. O. von Estorff Copyright 2008 D. Clasen, Braunschweig BSM 64-2008 ISBN 978-3-920395-63-0 Alle Rechte, insbesondere der Übersetzung in fremde Sprachen, vorbehalten. Mit Genehmigung des Autors ist es gestattet, dieses Heft ganz oder teilweise zu vervielfältigen. Zusammenfassung Die Bevölkerung Deutschlands ist dem Lärm durch eine Vielzahl von Schallquellen ausgesetzt. Straßen, Schienenwege, Flugplätze, Gewerbeanlagen, Sportanlagen und nicht zuletzt Nachbarn führen häufig zu Lärmproblemen. Auf Grund dieser immer stärker werdenden Lärmbelastungen gewinnt die Berechnung der Schalldämmung zunehmend an Bedeutung. Dabei spielt die Erfas- sung von beliebigen geometrischen, bauphysikalischen und bauakustischen Randbedingungen ei- ne entscheidende Rolle. Oftmals wird der Nachweis
    [Show full text]
  • Modeling, Adaptive Discretization, Stabilization, Solvers
    INdAM Workshop on Multiscale Problems: Modeling, Adaptive Discretization, Stabilization, Solvers CORTONA, SEPTEMBER 18-22, 2006 http://www.mat.unimi.it/cortona06 Book of Abstracts ORGANIZING COMMITTEE: D. Boffi Universit`adi Pavia L. F. Pavarino Universit`adi Milano G. Russo Universit`adi Catania F. Saleri Politecnico di Milano A. Veeser Universit`adi Milano Contents M. Ainsworth, Modeling and Numerical Analysis of Masonry Structures 1 L. Beirao˜ da Veiga, Asymptotic Energy Analysis of Shell Eigenvalue Problems 2 S. Berrone, A Posteriori Error Analisys of Finite Element Approximations of Quasi- Newtonian Flows 3 F. Brezzi, Mimetic Finite Differences Methods 4 A. Buffa, A Multiscale Discontinuous Galerkin Method for Convection Diffusion Problems 5 E. Burman, A Minimal Stabilisation Procedure for Discontinuous Galerkin Approximations of Advection-Reaction Equations 6 P. Deuflhard, Multiscale Problems in Computational Medicine 7 Z. Dost`al, Scalable FETI Based Algorithms for Numerical Solution of Variational Inequal- ities 8 Y. Efendiev, Multiscale Finite Element Methods for Flows in Heterogeneous Porous Media and Applications 9 B. Engquist, Heterogeneous Multiscale Methods 10 A. Ern, Simulation with Adaptive Modeling 11 L. Gastaldi, The Finite Element Immersed Boundary Method: Model, Stability, and Nu- merical Results 12 A. Klawonn, Extending the Scalability of FETI-DP: from Exact to Inexact Algorithms 13 D. L. Marini, Stabilization Mechanisms in Discontinuous Galerkin Methods. Applications to Advection-Diffusion-Reaction Problems 14 G. Naldi, High Order Relaxed Schemes for non Linear Diffusion Problems 15 F. Nobile, Multiphysics in Haemodynamics: Fluid-structure Interaction between Blood and Arterial Wall 16 R. H. Nochetto, Convergence and Optimal Complexity of AFEM for General Elliptic Operators 17 L.
    [Show full text]
  • Symmetric Boundary Knot Method
    Symmetric boundary knot method W. Chen* Simula Research Laboratory, P. O. Box. 134, 1325 Lysaker, Norway E-mail: [email protected] (submitted 28 Sept. 2001, revised 25, Feb. 2002) Abstract The boundary knot method (BKM) is a recent boundary-type radial basis function (RBF) collocation scheme for general PDE’s. Like the method of fundamental solution (MFS), the RBF is employed to approximate the inhomogeneous terms via the dual reciprocity principle. Unlike the MFS, the method uses a non-singular general solution instead of a singular fundamental solution to evaluate the homogeneous solution so as to circumvent the controversial artificial boundary outside the physical domain. The BKM is meshfree, super-convergent, integration-free, very easy to learn and program. The original BKM, however, loses symmetricity in the presence of mixed boundary. In this study, by analogy with Fasshauer’s Hermite RBF interpolation, we developed a symmetric BKM scheme. The accuracy and efficiency of the symmetric BKM are also numerically validated in some 2-D and 3-D Helmholtz and diffusion-reaction problems under complicated geometries. Keyword: boundary knot method; radial basis function; meshfree; method of fundamental solution; dual reciprocity BEM; symmetricity * This research is supported by Norwegian Research Council. 1 1.Introduction In recent years much effort has been devoted to developing a variety of meshfree schemes for the numerical solution of partial differential equations (PDE’s). The driving force behind the scene is that the mesh-based methods such as the standard FEM and BEM often require prohibitive computational effort to mesh or remesh in handling high- dimensional, moving boundary, and complex-shaped boundary problems.
    [Show full text]
  • Computational Fluid-Structure Interaction with the Moving Immersed Boundary Method Shang-Gui Cai
    Computational fluid-structure interaction with the moving immersed boundary method Shang-Gui Cai To cite this version: Shang-Gui Cai. Computational fluid-structure interaction with the moving immersed boundary method. Mechanical engineering [physics.class-ph]. Université de Technologie de Compiègne, 2016. English. NNT : 2016COMP2276. tel-01461619 HAL Id: tel-01461619 https://tel.archives-ouvertes.fr/tel-01461619 Submitted on 15 May 2017 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Par Shang-Gui CAI Computational fluid-structure interaction with the moving immersed boundary method Thèse présentée pour l’obtention du grade de Docteur de l’UTC Soutenue le 30 mai 2016 Spécialité : Mécanique Avancée D2276 Shang-Gui CAI Computational fluid-structure interaction with the moving immersed boundary method Thèse présentée pour l’obtention du grade de Docteur de Sorbonne Universités, Université de Technologie de Compiègne. Membres du Jury : Y. Hoarau Professeur, Université de Strasbourg Rapporteur P. Pimenta Professeur, University of São Paulo Rapporteur H. Naceur Professeur, Université de Valenciennes, UVHC Examinateur J. Favier Maître de Conférences, Aix-Marseille Université Examinateur A. Ibrahimbegovic Professeur, Université de Technologie de Compiègne Examinateur E. Lefrançois Professeur, Université de Technologie de Compiègne Examinateur P.
    [Show full text]
  • Singular Boundary Method for Heat Conduction in Layered Materials
    Copyright © 2011 Tech Science Press CMC, vol.24, no.1, pp.1-14, 2011 Singular Boundary Method for Heat Conduction in Layered Materials H. Htike1;2, W. Chen1;2;3 and Y. Gu1;2 Abstract: In this paper, we investigate the application of the singular boundary method (SBM) to two-dimensional problems of steady-state heat conduction in isotropic bimaterials. A domain decomposition technique is employed where the bimaterial is decomposed into two subdomains, and in each subdomain, the solu- tion is approximated separately by an SBM-type expansion. The proposed method is tested and compared on several benchmark test problems, and its relative merits over the other boundary discretization methods, such as the method of fundamental solution (MFS) and the boundary element method (BEM), are also discussed. Keywords: Singular boundary method, origin intensity factor, heat conduction, bimaterials, meshless. 1 Introduction During machining processes, heat is a source that strongly influences the tool per- formance, such as tool wear, tool life, surface quality as well as process quality. The layers of material provide a barrier for the intensive heat flow from the con- tact area into the substrate material. Thus, a clear understanding of the temperature distribution in layered materials is very useful and important [Atluri (2005); Atluri, Liu, and Han (2006);Chang, Liu, and Chang (2010);Chen and Liu (2001)]. The method of fundamental solutions (MFS) [Karageorghis (1992);Fairweather and Karageorghis (1998);Chen, Golberg, and Hon (1998)] is a successful technique for the solution of some elliptic boundary value problems in engineering applica- tions. It is applicable when a fundamental solution of the operator of the governing equation is known.
    [Show full text]
  • J. Calderon-Sanchez
    Universidad Polit´ecnicade Madrid Escuela T´ecnicaSuperior de Ingenieros Navales Programa de Doctorado en Ingenier´ıaNaval y Oce´anica Numerical studies of the sloshing phenomenon using the Smoothed Particle Hydrodynamics (SPH) method. Javier Calderon-Sanchez Supervisor: Daniel Duque Campayo January, 2020 `Nothing in life is to be feared, it is only to be understood. Now is the time to understand more, so that we may fear less.' Marie Curie i ii Tribunal designado por la Comisión de Doctorado de la Universidad Politécnica de Madrid, en su reunión del día...............de.............................de 20..... Presidente: Vocal: Vocal: Vocal: Secretario: Suplente: Suplente: Realizado el acto de defensa y lectura de la Tesis el día..........de........................de 20 ... en la E.T.S.I. /Facultad.................................................... Calificación .................................................. EL PRESIDENTE LOS VOCALES EL SECRETARIO iv Declaration I hereby declare that the contents presented in this dissertation are original and, to the best of my knowledge, they contain no material published by another person, or substantial proportions of material that have been submitted for any degree or other purposes, except where specific reference is made to the work of others. I certify that the intellectual content of this thesis is the product of my own work and that all the assistance received in preparing this thesis and sources have been acknowledged. Javier Calderon-Sanchez January, 2020 v vi Abstract The purpose of the present thesis is to increase the applicability of Smoothed Particle Hydro- dynamics (SPH) method to sloshing problems relevant in engineering. The thesis is structured around three main topics: theoretical improvements on SPH, imple- mentation of tools and physical models within the open-source software AQUAgpusph, and studies on 3-D geometries and application cases.
    [Show full text]
  • Potential Problems by Singular Boundary Method Satisfying Moment Condition
    Copyright © 2009 Tech Science Press CMES, vol.54, no.1, pp.65-85, 2009 Potential Problems by Singular Boundary Method Satisfying Moment Condition Wen Chen1;2, Zhuojia Fu1 and Xing Wei1 Abstract: This study investigates the singular boundary method (SBM), a novel boundary-type meshless method, in the numerical solution of potential problems. Our finding is that the SBM can not obtain the correct solution in some tested cases, in particular, in the cases whose solution includes a constant term. To rem- edy this drawback, this paper presents an improved SBM formulation which is a linear sum of the fundamental solution adding in a constant term. It is stressed that this SBM approximation with the additional constant term has to satisfy the so-called moment condition in order to guarantees the uniqueness of the solution. The efficiency and accuracy of the present SBM scheme are demonstrated through detailed comparisons with the exact solution, the method of fundamental solutions and the regularized meshless method. Keywords: Singular boundary method, fundamental solution, singularity at the origin, moment condition, potential problem 1 Introduction Without a need of harassing mesh generation in the traditional FEM [Zienkiewicz and Taylor (1991)] and BEM [Ong and Lim (2005)], meshless methods [Li and Liu (2002)] have attracted much attention in recent years. This study focuses on the boundary-type meshless numerical techniques, for instance, method of funda- mental solutions (MFS) [Chen, Golberg and Hon (1998); Cheng, Young and Tsai (2000); Fairweather and Karageorghis (1998); Karageorghis (1992); Liu (2008); Marin (2008,2010a,2010b); Poullikkas, Karageorghis and Georgiou (1998); Reut- skiy (2005); Smyrlis and Karageorghis (2001)], boundary knot method (BKM) by Chen and Tanaka (2002), boundary particle method [Chen and Fu (2009): Fu, Chen 1 Center for Numerical Simulation Software in Engineering and Sciences, Department of Engineer- ing Mechanics, College of Civil Engineering, Hohai University, Nanjing, Jiangsu, P.R.China 2 Corresponding author.
    [Show full text]
  • Adaptive Reduced-Order Modeling for Non-Linear Fluid–Structure Interaction
    Delft University of Technology Adaptive reduced-order modeling for non-linear fluid–structure interaction Thari, Ali; Pasquariello, Vito; Aage, Niels; Hickel, Stefan DOI 10.1016/j.compfluid.2021.105099 Publication date 2021 Document Version Final published version Published in Computers and Fluids Citation (APA) Thari, A., Pasquariello, V., Aage, N., & Hickel, S. (2021). Adaptive reduced-order modeling for non-linear fluid–structure interaction. Computers and Fluids, 229, [105099]. https://doi.org/10.1016/j.compfluid.2021.105099 Important note To cite this publication, please use the final published version (if applicable). Please check the document version above. Copyright Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons. Takedown policy Please contact us and provide details if you believe this document breaches copyrights. We will remove access to the work immediately and investigate your claim. This work is downloaded from Delft University of Technology. For technical reasons the number of authors shown on this cover page is limited to a maximum of 10. Computers and Fluids 229 (2021) 105099 Contents lists available at ScienceDirect Computers and Fluids journal homepage: www.elsevier.com/locate/compfluid Adaptive reduced-order modeling for non-linear fluid–structure interaction Ali Thari a, Vito Pasquariello b, Niels Aage c, Stefan Hickel a,< a Aerodynamics Group, Faculty of Aerospace Engineering, Technische Universiteit Delft, Kluyverweg 1, 2629 HS Delft, The Netherlands b Lilium eAircraft GmbH, Claude-Dornier Str.
    [Show full text]
  • Singular Boundary Method for Solving Plane Strain Elastostatic Problems
    International Journal of Solids and Structures 48 (2011) 2549–2556 Contents lists available at ScienceDirect International Journal of Solids and Structures journal homepage: www.elsevier.com/locate/ijsolstr Singular boundary method for solving plane strain elastostatic problems ⇑ Yan Gu a,b, Wen Chen a,b, , Chuan-Zeng Zhang c a Center for Numerical Simulation Software in Engineering and Sciences, Department of Engineering Mechanics, Hohai University, Nanjing 210098, PR China b State Key Laboratory of Structural Analysis for Industrial Equipment, University of Technology, Dalian 116024, PR China c Department of Civil Engineering, University of Siegen, Paul-Bonatz-Str. 9-11, D-57076 Siegen, Germany article info abstract Article history: This study documents the first attempt to apply the singular boundary method (SBM), a novel boundary Received 15 December 2010 only collocation method, to two-dimensional (2D) elasticity problems. Unlike the method of fundamental Received in revised form 16 April 2011 solutions (MFS), the source points coincide with the collocation points on the physical boundary by using Available online 14 May 2011 an inverse interpolation technique to regularize the singularity of the fundamental solution of the equa- tion governing the problems of interest. Three benchmark elasticity problems are tested to demonstrate Keywords: the feasibility and accuracy of the proposed method through detailed comparisons with the MFS, bound- Singular boundary method ary element method (BEM), and finite element method (FEM). Collocation method Ó 2011 Elsevier Ltd. All rights reserved. Singularity Origin intensity factor Inverse interpolation technique Elasticity problem 1. Introduction Thus, over the past decade, some considerable effort was de- voted to eliminating the need for meshing.
    [Show full text]
  • Improving the Material Point Method Ming Gong
    University of New Mexico UNM Digital Repository Mathematics & Statistics ETDs Electronic Theses and Dissertations 9-1-2015 Improving the Material Point Method Ming Gong Follow this and additional works at: https://digitalrepository.unm.edu/math_etds Recommended Citation Gong, Ming. "Improving the Material Point Method." (2015). https://digitalrepository.unm.edu/math_etds/17 This Dissertation is brought to you for free and open access by the Electronic Theses and Dissertations at UNM Digital Repository. It has been accepted for inclusion in Mathematics & Statistics ETDs by an authorized administrator of UNM Digital Repository. For more information, please contact [email protected]. Ming Gong Candidate Mathematics and Statistics Department This dissertation is approved, and it is acceptable in quality and form for publication: Approved by the Dissertation Committee: Prof. Deborah Sulsky, Chair Prof. Howard L. Schreyer, Member Prof. Stephen Lau, Member Prof. Daniel Appelo, Member Prof. Paul J. Atzberger, Member i Improving the Material Point Method by Ming Gong B.S., Applied Math, Dalian Jiaotong University, 2009 B.S., Software Engineering, Dalian Jiaotong University, 2009 M.S., Applied Math, University of New Mexico, 2012 DISSERTATION Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy Mathematics The University of New Mexico Albuquerque, New Mexico July, 2015 Dedication For Xuanhan, Sumei, and Zhongbao. iii Acknowledgments I would like to thank my advisor, Professor Deborah Sulsky, for her support and guidance during my study at UNM. Not only have I learned the deep knowledge in numerical methods in PDEs from her, but I have also learned to do research in gen- eral.
    [Show full text]