Install SIL3512 Driver

Step 1: Put the card into PCI slot, start computer, Figure 2 will show on screen after the new hardware is found. If not, Right click “My Computer” into system, enter “Device Manager”. As shown in Figure 1.

Figure 1 Step 2: Click the “!( yellow) RAID Controller”, then Press “Update Driver Software”. As shown: Figure 2 Step 3: Select the second instruction showed in Figure 2, choosing different drivers according to different systems: ● windows （ WIN 98/ME/NT/2K/XP/VISTA/2003server/2008server/7 ） 32-bit driver files：SIL3512\Windows Driver\SiI3x12R_x86_10651 ● windows (WIN XP/VISTA/2003server/2008server/7) 64-bit driver files ： SIL3112\Windows Driver\SiI3512R_x64_10171\ext64

Press “OK”, then press “Next” to continue to setup，as shown in Figure 3：

Figure 3 Step 4: After step 3 was done, Figure 4 will show on screen, then press “Install”. Figure 4 Step 5: Figure 5 will show on screen after the driver was installed successfully. Press “Close”.

Figure 5 Step 6: After installation, Right click “My Computer” into system, enter “Device Manager” to check the device. Figure 6