CNC Bevelling Machine for H-Beams Model BM55-6 1.Technical Specification of BM55-6 1) longitudinal slipway quantity: 1 longitudinal stroke: 300mm motor power: 0.37kW 2) transverse slipway : quantity: 1 transverse stroke: 1050mm motor power: 0.37kW 3) milling heads : quantity: 2 milling cutter: Cemented carbide indexable axially ajusting value : 80mm motor power of spindle: 15KW×2 size of workpiece:(as follows)

H=220 ~1250mm S= MAX 300mm B=100 ~ 600mm T= 10 ~ 55mm 4) Column: quantity: 2 stroke : 1300mm Motor power: 2.2KW×2

1 moving range of clamp: 100 ~ 600mm Clamp way: hydraulic clamp 5) stopper-mechanism: quantity: 2 stroke: 0 ~ 40mm motor power: 0.06KW×2 6) roller way: The length of off-line roller way: 5000mm Off-line motor power: 1.1kW On line motor power: 0.55kW 7) Overall dimension(Length ×width ×height): 7.0×4.0×2.8 m 8) Weight: Approx.11 t 9) Working temperature: 0℃ ~ 40 ℃ Power: Three phase four wire system AC Voltage: 380V Fluctuation of voltage: ±10% Frequency: 50 Hz 2. List of the main outsourcing components of BM55-6

No. Name Brand Country

1 Linear Roll Guideway HIWIN Taiwan China

2 Ballscrew NEFF Germany

3 Air Valve AIRTAC Taiwan China

4 Variable Vane Pump JUSTMARK Taiwan China

5 Inneraxial oil pump motor JUSTMARK Taiwan China

6 Hydraulic valve ATOS Italy

7 Transducer Siemens Germany

8 Encoder Koyo Japan

9 PLC Mitsubishi Japan

10 Tuch screen PROFACE Japan

11 Button,switch,AC contactor Schneider France

2 Note: The above is our fixed supplier. If the supplier can not supply the components in case of any special matter, we will adopt the components with the same level, but the quality is no worse than the above.

3.List of accessories and spare parts of BM55-6 No code name quantity remark 1 BM55/12.2-19 Holding screw 3 2 BM55/12.2-17 Washer 4 3 BM55/12.2-13 plain milling Laevorotation: 1 including those Dextrorotation: 1 cutter(with blade) installed in the 4 BM55/12.2-15 Arc milling cutter Laevorotation: 1 machine,includi Dextrorotation: 1 (with blade) ng50% standby 5 BM55/12.2-20a Coned milling cutter Laevorotation: 2 or Dextrorotation: 2 blade (with blade) 6 BM55/12.2-20b Coned milling Laevorotation: 2 or Dextrorotation: 2 cutter(with blade) 7 Nuts for fastening Big and small each blade 10 8 Tightening spanner of Big and small each 1 special cutter 9 BM55/12.2-54 Spanner 1 10 BM55/12.2-55 Handle 1 11 JB/GQ0341-89 tube fitting 12.5 2 12 ZBJ51002-87 hose clamp 25 2 13 HTD-585-5M Synchronous Belt 2 CIXIHENGLI 14 HFH2-P1-3-P-1 piezometer soft tube 1 LIMING 15 YN-63-I 10 pressure gauge 10MPa 1 LIMING

3