Display Hidden Notes to Specifier. (Don't Know How? Click Here) s54

SECTION 10 28 14 DIAPER CHANGING STATION

Display hidden notes to specifier. (Don't know how? Click Here)

PART 1 GENERAL

1.1 SECTION INCLUDES

1.A. Diaper changing stations.

1.B. Child wall seats.

1.C. Liner dispensers.

1.D. Diaper dispensers.

1.2 RELATED SECTIONS

2.A. Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.

1.3 SUBMITTALS

3.A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

3.B. Product Data: Manufacturer's data sheets on each product to be used, including: 3.B.1. Preparation instructions and recommendations. 3.B.2. Storage and handling requirements and recommendations. 3.B.3. Installation methods.

1.4 DELIVERY, STORAGE, AND HANDLING

4.A. Store products in manufacturer's unopened packaging until ready for installation.

1.5 PROJECT CONDITIONS

5.A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits

10 28 14-1 recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.6 WARRANTY

6.A. Warranty: Provide manufacture's standard limited 5-year warranty. All warranties are effective from the date of initial shipment from manufacturer.

PART 2 PRODUCTS

2.1 MANUFACTURERS

1.A. Acceptable Manufacturer: Foundations Worldwide, Inc., which is located at: 5216 Portside Dr,; Medina, OH 44256 ; Toll Free Tel: 877-716-2757; Tel: 330-722-5033; Fax: 330-722-5037; Email: request info ([email protected]); Web: www.foundations.com/changing-stations

1.B. Substitutions: Not permitted.

1.C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 DIAPER CHANGING STATIONS

2.A. Diaper changing stations shall meet ASTM safety standards, include ANSI warning labels, and shall be ADA compliant when installed.

2.B. Horizontal Polyethylene Diaper Changing Station: 2.B.1. Product: 100-EHBP - Horizontal Polyethylene Diaper Changing Station as manufactured by Foundations Worldwide, Inc. 2.B.1.a. Models shall include built-in liner dispensers, diaper hooks, mounting hardware, one-hand operation safety strap and buckle. 2.B.1.b. Provide backer plate mounting bracket. 2.B.1.c. Required mounting surface 16 inches (406 mm) high by 34.25 inches (870 mm) wide. 2.B.1.d. Changing surface extends 17.5 inches (445 mm) from wall in open position.

2.C. Vertical Polyethylene Diaper Changing Station: 2.C.1. Product: 100-EVBP - Vertical Polyethylene Diaper Changing Station as manufactured by Foundations Worldwide, Inc. 2.C.1.a. Models shall include built-in liner dispensers, diaper hooks, mounting hardware, one-hand operation safety strap and buckle. 2.C.1.b. Required mounting surface 30.5 inches (775 mm) high by 19.5 inches (495 mm) wide. 2.C.1.c. 10 28 14-2 Provide backer plate mounting bracket. 2.C.1.d. Changing surface extends 32 inches (813 mm) from wall in open position.

2.D. Clad Stainless Steel Diaper Changing Station: 2.D.1. Product: 100-SSC-R - Clad Stainless Steel Diaper Changing Station (Recessed) as manufactured by Foundations Worldwide, Inc. 2.D.1.a. Rough-in dimension for recessed model is 35.625 inches W by 19.625 inches H (905 mm W by 498 mm). 2.D.1.b. Changing surface extends 13.1875 inches (335 mm) from wall in open position. 2.D.2. Product: 100-SSC-SM - Clad Stainless Steel Diaper Changing Station (Surface Mounted) as manufactured by Foundations Worldwide, Inc. 2.D.2.a. Required mounting surface 21.375 inches (543 mm) high by 34.75 inches (883 mm) wide. 2.D.2.b. Changing surface extends 17.1875 inches (437 mm) from wall in open position. 2.D.3. Constructed of heavy-duty type 304 brushed stainless steel. 2.D.4. Pneumatic gas spring provides easy and safe open/close operation. 2.D.5. One-hand operation safety strap. 2.D.6. Cushioned safety corners.

2.E. Horizontal Full Stainless Steel Diaper Changing Station: 2.E.1. Product: 100-SSR-R - Horizontal Full Stainless Steel Diaper Changing Station (Recessed) as manufactured by Foundations Worldwide, Inc. 2.E.1.a. Rough-in dimensions for recessed unit: 34.5 inches W by 21.75 inches H (876 mm W by 552 mm H). 2.E.1.b. Changing surface extends 18 inches (457 mm) from wall in open position. 2.E.2. Product: 100-SSR-SM - Horizontal Full Stainless Steel Diaper Changing Station (Surface Mounted) as manufactured by Foundations Worldwide, Inc. 2.E.2.a. Required mounting surface 14 inches (356 mm) high by 32 inches (813 mm) wide. 2.E.2.b. Changing surface extends 21.375 inches (543 mm) from wall in open position. 2.E.3. Replaceable high-hygiene polystyrene tray. 2.E.4. Constructed of heavy-duty type 304 brushed stainless steel. 2.E.5. Pneumatic gas spring provides easy and safe open/close operation. 2.E.6. One-hand operation safety strap. 2.E.7. Cushioned safety corners.

2.F. Vertical Full Stainless Steel Diaper Changing Station: 2.F.1. 10 28 14-3 100-SSV-R - Vertical Full Stainless Steel Diaper Changing Station (Recessed) as manufactured by Foundations Worldwide, Inc. 2.F.1.a. Rough-in dimensions for recessed unit: 22.5 inches W by 34.125 inches H (572 mm W by 867 mm H). 2.F.1.b. Changing surface extends 30.375 inches (772 mm) from wall in open position. 2.F.2. 100-SSV-SM - Vertical Full Stainless Steel Diaper Changing Station (Surface Mounted) as manufactured by Foundations Worldwide, Inc. 2.F.2.a. Required mounting surface 26 inches (660 mm) high by 16 inches (406 mm) wide. 2.F.2.b. Changing surface extends 31.5 inches (800 mm) from wall in open position. 2.F.3. Replaceable high-hygiene polystyrene tray. 2.F.4. Constructed of heavy-duty type 304 brushed stainless steel. 2.F.5. Pneumatic gas spring provides easy and safe open/close operation. 2.F.6. One-hand operation safety strap. 2.F.7. Cushioned safety corners.

2.G. Special Needs Diaper Changing Station: 2.G.1. Product: 100-SSE-R - Extended Length Changer (Recessed) as manufactured by Foundations Worldwide, Inc. 2.G.1.a. Rough-in dimensions for recessed unit: 63.25 inches W by 21.75 inches H (1607 mm W by 552 mm H). 2.G.1.b. Changing surface extends 17.875 inches (454 mm) from wall in open position. 2.G.2. Product: 100-SSE-SM - Extended Length Changer (Surface Mounted) as manufactured by Foundations Worldwide, Inc. 2.G.2.a. Required mounting surface 14.75 inches (375 mm) high by 48 inches (1219 mm) wide. 2.G.2.b. Changing surface extends 21.375 inches (543 mm) from wall in open position. 2.G.3. Constructed of heavy-duty type 304 brushed stainless steel and is rated to support a static load of 400 lb (181 kg). 2.G.4. Replaceable high-hygiene polystyrene tray. 2.G.5. Dual pneumatic gas springs provide easy and safe open/close operation. 2.G.6. When closed, unit projects 1 inch (25 mm) from wall if recessed or 4 inches (102 mm) if surface mounted. 2.G.7. Replaceable high-hygiene polystyrene tray. 2.G.8. Features cushioned safety corners. 2.G.9. One-hand operation safety strap.

2.H. Horizontal Full Stainless Steel Diaper Changing Station: 10 28 14-4 2.H.1. Product: 5410339 - Horizontal Full Stainless Steel Diaper Changing Station as manufactured by Foundations Worldwide, Inc. 2.H.1.a. Surface mounted, required mounting surface 15.62 inches (397 mm) high by 34.69 inches (881 mm) wide. 2.H.1.b. Changing surface extends 17 inches (418 mm) from wall in open position. 2.H.2. Replaceable high-hygiene polystyrene tray. 2.H.3. Constructed of heavy-duty type 304 brushed stainless steel. 2.H.4. Pneumatic gas spring provides easy and safe open/close operation. 2.H.5. One-hand operation safety strap. 2.H.6. Cushioned safety corners. 2.H.7. I. Horizontal Polyethylene with Stainless Steel Frame Diaper Changing Station: 2.H.8. Product: 5240259 - Horizontal Polyethylene Diaper Changing Station as manufactured by Foundations Worldwide, Inc. 2.H.8.a. Models shall include built-in liner dispensers, diaper hooks, mounting hardware, one-hand operation safety strap and buckle. 2.H.8.b. Provide backer plate mounting bracket. 2.H.8.c. Recessed, required rough-in opening 35.625 inches (905 mm) wide by 19.625 inches (499 mm) high. 2.H.8.d. Changing surface extends 14.25 inches (362 mm) from wall in open position.

2.3 CHILD SAFETY SEATS

3.A. Child Safety Seat: Meet ASTM safety standards, include ANSI warning labels, and shall be ADA compliant when installed.

3.B. Wall Seat: 3.B.1. Product: 103-BQS - Wall Seat as manufactured by Foundations Worldwide, Inc. 3.B.2. Molded of high density polyethylene that is inherently bacterial resistant. 3.B.3. Required mounting surface 12 inches W by 16.3125 inches H (305 mm W by 415 mm H). 3.B.4. Seat extends 13.5 inches (343 mm) from wall when open.

2.4 DISPENSERS

4.A. Diaper Vendors: 4.A.1. Product: 106-SS - Diaper Vendor as manufactured by Foundations Worldwide, Inc. 4.A.2. Brushed 304 stainless steel. 4.A.3.

10 28 14-5 Can recess up to 3.75 inches (96 mm) using optional recessing flange Model 025-SS. 4.A.4. Refillable with diaper kits Model 107-DK. 4.A.5. Holds 24 diaper kits and is preset at $1.00 per sale.

4.B. Liner Dispensers: 4.B.1. Product: 200-SSLD - Liner Dispenser as manufactured by Foundations Worldwide, Inc. 4.B.2. Brushed 304 stainless steel. 4.B.3. Dispenser is recessed mounted separately from changing station. 4.B.4. Holds liner Models 036-LCR and 036-NWL.

PART 3 EXECUTION

3.1 EXAMINATION

1.A. Do not begin installation until substrates have been properly prepared.

1.B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

2.A. Clean surfaces thoroughly prior to installation.

2.B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

3.A. Install in accordance with manufacturer's instructions.

3.4 PROTECTION

4.A. Protect installed products until completion of project.

4.B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

10 28 14-6