LATICRETE Plaza and Deck Installation System

LATICRETE® Plaza & Deck Installation System Data Sheet 290.0 1. PRODUCT NAME LATICRETE® Plaza and Deck Installation System •LATICRETE 9235 WATERPROOFING AND CRACK SUPPRESSION MEMBRANE - A thin, liquid-applied, fabric reinforced waterproof membrane applied over 2. MANUFACTURER LATICRETE Latex Mortar Bed. Non-flammable and non- LATICRETE International, Inc. hazardous. Provides secondary waterproofing and crack 1 LATICRETE Park North suppression protection. Bethany, CT 06524-3423 USA Telephone: (203) 393-0010 ext. 235 •LATICRETE LATEX THIN-SET MORTAR AND LATEX Toll Free: (800) 243-4788 ext. 235 MODIFIED GROUT - Ceramic tile, pavers, brick or natural Fax: (203) 393-1684 stone are installed directly over the LATICRETE Mortar Bed Internet: www.LATICRETE.com and Membrane with LATICRETE Latex Thin-Set Mortar and Latex Modified Grout for permanent, weather resistant and 3. PRODUCT DESCRIPTION maintenance-free installations. Thin-Set Mortar is prepared by mixing LATICRETE 211 Crete Filler Powder with LATICRETE

LATICRETE Plaza and Deck Installation provides a thin, 4237 Latex Thin-Set Mortar Additive. Grout is prepared by lightweight, weather and frost resistant installation for ceramic mixing LATICRETE 1500 Series Tri-Poly Fortified Sanded tile, pavers, brick or stone. This system is designed for use Grout with LATICRETE 1776 Grout Admix Plus with over roof waterproofing membranes. An integral subsurface Microban®. drainage component provides for elimination of infiltrated water. LATICRETE Plaza and Deck Installation System Coverage eliminates the dead load problems (501bs/ft2 /250 kg/m2) and high haulage/placement costs associated with conventional APPLICATION PRODUCT MIX RATIO COVERAGE gravel drain beds. Leveling Bed 226 Powder 60 Ibs to 1 gal. 32ft2 @ 1/4" Pitch w/ 3701 (7kg to (.7m2 @ 6mm) Layer Admix Uses 1 ℓ) thickness Recommended for new construction and renovations, such (Plastic Consist as: ency) • Plazas • Balconies • Walkways 2 • Exposed Decks • Terraces • Courtyards Mortar Bed 226 Powder 420 Ibs to 5 gal 22.5 ft @ 2" (Semi- w/3701A (200 kg to 20 ℓ) 2m2 @ 50mm Dry dmix thickness Advantages Pack) • Thin and lightweight, reduces dead load by 50% Thin Bed 211 Powder 35lbs to 1 gal 40 ft2 (1m2) • Frost and Weather Resistant (Trowel w/4237 (4kg to • Protects the tile installation from water damage and able) Admix 1 ℓ) frost heaving Grout (Plastic) 1500 Series 50 Ibs to 1 gal Refer to Grout • Provides integral subsurface drainage for extra heavy Grout w/ (6kg to Cover traffic conditions 1776 1 ℓ) age • Single source responsibility Admix Chart • Rated for Extra Heavy Traffic conditions • For new projects and renovations Shelf Life: Factory sealed containers of the LATICRETE Latex • Reduces potential for efflorescence liquids are guaranteed to be of first quality for two (2) years if stored at temperatures >32°F (0°C) and <110F' (43°C). Suitable Substrates Factory sealed containers of this product are guaranteed to be of Use over structurally sound and properly pitched: first quality for one (1) year if stored off the ground in a dry area. • Decks • Concrete • Precast *High humidity will reduce the shelf life of bagged product. • Exterior Grade Plywood that have been waterproofed with a primary roof waterproofing membrane. Limitations • Adhesives/mastics, mortars and grouts for ceramic tile, pavers, Packaging/Components brick and stone are not replacements for waterproof membranes. When a waterproof membrane is required, use a LATICRETE •LATICRETE DRAIN MAT - Lightweight, efficient Waterproof Membrane (see Section 10 Filing System) drainage mat; 300% better flow rate than crushed gravel drain bed. Mat Thickness: 1/4" (6mm) supplied in rolls. • A primary roof membrane must be installed first; the Mat is engineered to permit maximum load transfer to LATICRETE System is then loose-laid over the membrane structural deck while allowing lateral flow of infiltrated water to flow easily to drains - Patent # 5,383,314 • The elevated deck assembly must be structurally designed for maximum deflection not to exceed L/360 of the span of the •LATICRETE LATEX MORTAR BED - A high strength, structure under combined live and dead loads for ceramic tile and frost and shock resistant mortar that provides an extra L/480 for stone applications. heavy duty, loadbearing base for the bonded tile finish. Prepared by mixing with LATICRETE 226 Thick Bed Mortar • Consult local building codes and regulations for structural with LATICRETE 3701 Mortar Admix. Reinforced with 2" x requirements. 2" (5 x 5cm) 16 gauge galvanized wire.

Data sheets are subject to change without notice, for latest revision check our website. LDS2900.doc/RP/02/22/05 Cautions standing water. If membrane is to be left temporarily  During cold weather, protect finished work until fully cured. exposed, cover with protection board. Protect from rain with polyethylene sheet for 7 days @ 70°F (21°C) after  Contains Portland cement and silica sand. May irritate eyes installation. Flash membrane over edge of LATICRETE and skin. Avoid contact with eyes or prolonged contact with Mortar Bed at expansion joints (see detail drawing skin. In case of contact, flush thoroughly with water. 8003). NOTE: Do not bridge expansion joints with  Do not take internally. Silica sand may cause cancer or LATICRETE membrane. Flash membrane down into serious lung problems. Avoid breathing dust. Wear a joint and seal joint with foam backer rod and sealant. respirator in dusty areas. LATICRETE LATEX THIN-SET MORTAR - Install  Keep out of reach of children. ceramic tile, pavers and stone directly over LATICRETE 9235 Waterproof Membrane using 4. TECHNICAL DATA LATICRETE 4237 Latex Thin-Set Mortar Additive Physical Properties mixed with LATICRETE 211 Crete Filler Powder. Weight of System @ 2" (50mm) Thickness) 27lbs.1ft (132kg/m) LATICRETE Latex Modified Grout - Select grout (excluding veneer) color from Compressive Strength of System with 1/2" 432,000lbs/ft LATICRETE Grout Color Card Data Sheet 254.3US. 12mm Paver Tile (20.7MPa) Prepare grout using LATICRETE 1500 Series Tri-Poly Traffic Service Rating per ASTM C627-87 Extra Heavy Fortified Sanded Specifications subject to change without notification. Results shown are typical but Grout mixed with LATICRETE 1776 Grout Admix Plus reflect test procedures used. Actual field performance will depend on installation methods and site conditions. with Microban.

Expansion and Control Joints - Ensure that all wall/floor 5. INSTALLATION and field expansion joints are properly designed and spaced, Preparation and are free to move using a traffic-bearing, exterior grade Wood framed & plywood systems must be exterior sealant or pre-formed jointing material. Use LATICRETE grade. Slope concrete or wood structures to drain, or Latasil NS Natural Stone Sealant. to an edge, or scuppers must be provided, pitch ¼” per foot (18mm per 1 meter). 6. AVAILABILITY AND COST Application Availability PITCH LAYER - To provide pitch over a concrete LATICRETE and LATAPOXY® materials are available deck, prepare a LATICRETE® Latex Leveling Bed mix. worldwide. For distributor information: Apply mortar over dampened substrate. Build from 3 Toll Free: (800) 243-4788 featheredge up to /4" (18mm). Primary roof Telephone: (203) 393-0015 waterproofing membrane (provided by others) must be properly installed according to manufacturer's www.laticrete.com. instructions over the hardened pitch layer. Flood testing Cost: Contact a LATICRETE Distributor in your area. of primary waterproofing membrane is required prior to the installation of LATICRETE Plaza and Deck System. 7. WARRANTY Note: Contact roofing membrane manufacturer for installation and protection requirements. LATICRETE International, Inc. warrants that LATICRETE Plaza and Deck Installation System is free from LATICRETE DRAIN MAT - LATICRETE Drain Mat is manufacturing defects and will not break down, loose laid over primary waterproofing membrane. Mat is deteriorate or disintegrate under normal usage for a placed so that open cups face up. Roll out mat and cut period of ten (10) years from date of purchase subject to desired length with utility knife (protect waterproofing to the terms and conditions stated in Data Sheet membrane from damage). Interlock by placing one row 230.13 LATICRETE Product Warranty (see 10.) of disks over top of adjacent sheet and lay in. Sheets FILING SYSTEM). can be cut easily for precise fit at restraining wall surfaces. If Drain Mat will be exposed for a period of time. Cover with a protection board. Also, place 8. MAINTENANCE temporary weight on Drain Mat to prevent uplifting by LATICRETE and LATAPOXY grouts require routine cleaning wind. NOTE: Drain Mat interlocks in only one direction. with a neutral pH soap and water. All other LATICRETE and LATAPOXY materials require no maintenance but installation LATICRETE LATEX MORTAR BED - Screed the mortar in a normal manner, remembering to maintain performance and durability may depend on properly maintaining the proper pitch in the deck. Place galvanized wire products supplied by other manufacturers. reinforcing in the middle of the bed. Compact or tamp the mortar bed to ensure proper strength and durability. 9. TECHNICAL SERVICES A minimum bed thickness of 2" (50mm) is required. Note: Additional pitch can be built into mortar bed if Technical assistance primary membrane has not been sufficiently pitched Information is available by calling: (minimum required'/." per foot/ 18mm per meter. Toll Free: (800) 243-4788 ext. 235 Telephone: (203) 393-0015 ext. 235 LATICRETE 9235 WATERPROOF MEMBRANE (For detailed installation guidelines please refer to data FAX: (203) 393-1948 sheet 236.0, WPAF.5) LATICRETE 9235 Waterproof Technical and safety literature Membrane can be applied immediately after  To acquire technical and safety literature, please visit our LATICRETE Mortar Bed has hardened (12-24 hours @ 70°F (21°C). Do not install membrane over areas with website at www.LATICRETE.com.

Data sheets are subject to change without notice, for latest revision check our website. LDS2900.doc/RP/02/22/05 10. FILING SYSTEM Additional product information is available on our website at www.LATICRETE.com. The following is a list of related documents: DS 236.0: LATICRETE Waterproofing Membrane DS 231.0: LATICRETE 3701 Mortar Admix DS 239.1: LATICRETE 226 Thick Bed Mortar DS 230.1: LATICRETE 4237 Latex Thin-Set Mortar Additive DS 265.0: LATICRETE 1776 Grout Admix Plus DS 230.12: LATICRETE 10 Year System Warranty Guarantee DS 256.0: LATICRETE 1500 Series Tri-Poly Fortified Sanded Grout DS 254.3US: LATICRETE Grout Color Card Data Sheet DS WPAF.5: LATICRETE 9235 Waterproofing Membrane, LATICRETE Watertight Floor N' Wall Waterproofing, LATICRETE Blue 92 Anti-Fracture Membrane How To Booklet DS 640.0: LATICRETE Latasil HD Heavy Duty Floor Sealant DS 652.0: LATICRETE Latasil NS Natural Stone Sealant

Data sheets are subject to change without notice, for latest revision check our website. LDS2900.doc/RP/02/22/05 Key Notes 1. Tile, Brick, Pavers and Stone 2. LATICRETE Sanded Grout (500 series) with LATICRETE 3701 Mortar Admix or LATICRETE 1776 Grout Admix Plus 3. LATICRETE 4237 Latex Thin-Set Mortar Additive with LATICRETE 211 Crete Filler Powder 4. LATICRETE 9235 Waterproofing Membrane for Secondary Waterproofing and Crack Suppression 5. LATICRETE 3701 Mortar Admix, with LATICRETE 226 Thick Bed Mortar (Minimum 2" / 48mm) 6. LATICRETE Wire Reinforcing (16 Gauge, 2"x 2" (5cm x 5cm) Welded Galvanized wire mesh) 7. LATICRETE Drain Mat 8. Primary Waterproofing Membrane (Rooting Type) 9. Concrete Slab, Property Pitched: 1/4" per foot/ 18mm per meter 10. Expansion Joint 11. Foam Backer Rod Topped with Suitable Sealant 11a. Suitable Sealant 12 Flashing 13. Tile Base 14. Balcony Edging Tile 15. Edge Profile 16. Drip Edge 17. Gutter 18. Gap Between Edging Profile and Balcony Edging Tile

Data sheets are subject to change without notice, for latest revision check our website. LDS2900.doc/RP/02/22/05