Configuring Kaleel Order+ System for Dial-Up s1

Configuring Kaleel Order+ System for Dial-up

Use these directions if you have a dial-up Internet connection.

1. Print these instructions.

2. Set up your Kaleel Dial-in account: a. Click on Start  Control Panel Network Connections b. Click on “Create a new connection”

c. Click on Next.

d. Click on Next.

e. Choose “Set up my connection manually” and click Next.

f. Click Next.

g. Type in “Kaleel” and click Next.

h. Type in the phone number (18775964295) and click Next.

i. Type in the userid and password. Username – guest Password – kbi must be lowercase Confirm password - kbi Uncheck the box – “Make this the default Internet connection Click on Next.

j. Click on Finish.

3. Double-Click on the Order Plus+32 icon on your desktop.

4. Setup your customer id in the system: a. Click on Setup and then click on System Parameters.

b. The following window will appear. Type in the following information: Company Name – Your store name (optional) Laptop ID – Your Kaleel Brothers customer number. Your customer number can be found on the top right corner of your order guide. Password – A password is not needed on this screen. Click Apply. Hit Ok.

c. Contact Kaleel Brothers at 1-800-929-3663, ext. 229 to get set up in the on-line ordering system. Contact name is Jan Paxson.

5. Once you are set up, click on CommsRequest Updates

a. The first time, you will get the following screen, Click on Yes.

------ORDER ------There are no modem profiles to browse. Would you like to create a new one? ------Yes No ------

b. Complete the screen as follows: Profile Name = Dial-Up TCP/IP address = 192.9.200.1 Login name = orders Password = orders Confirm password = orders Change the Buffer size to 512 Check the box titled “Use Dial-Up Connection”

c. Click on the box titled “Select Dial-Up Connection”. Choose your newly created dial-up network connection (Kaleel).

d. Hit “Save as a new Profile”. Note: If an error is displayed (Missing TCP/IP Address), click on , then click on “Save as New Profile”.

6. Click on the new profile (Dial-Up) and click on the button “Select Profile”.

a. You will get the following screen. Click on the “New Databases” button. Click on OK.

b. You’ll go through the following screens:

Page 7 Click on Close.