First Meeting of State Level Environment Impact Assessment Authority, Chhattisgarh s1

Total Page:16

File Type:pdf, Size:1020Kb

First Meeting of State Level Environment Impact Assessment Authority, Chhattisgarh s1

SUMMARY RECORD OF THE 19 TH MEETING OF STATE LEVEL EXPERT APPRAISAL COMMITTEE, CHHATTISGARH

The 19th meeting of State Level Expert Appraisal Committee, Chhattisgarh was held on 26th December 2008 at Conference Hall, SEAC, Secretariat, 1-Tilak Nagar, Shiv Mandir Chowk, Main Road, Avanti Vihar, Raipur at 2:00 PM. Dr. Harendra Kumar, Chairman, SEAC, Chhattisgarh chaired the meeting. The following members of SEAC were present in the meeting: - 1. Dr. Piyush Kant Pandey, Member, SEAC 2. Shri Anant Prabhakar Rajimwale, Member, SEAC 3. Dr. M.L. Agrawal Co-opt. Member, SEAC At the outset, the Nodal Officer, SEAC, Chhattisgarh welcomed the Chairman and Members of State Level Expert Appraisal Committee, Chhattisgarh. Agenda wise discussions were carried out as follows: -

Agenda Item No. 1 - Confirmation of minutes of the 17th & 18th meeting of SEAC, Chhattisgarh

Minutes of the 17th & 18th meeting of SEAC, Chhattisgarh held on 29/11/2008 and 2/12/2008 was presented before the committee. The Committee approved minutes of the meeting.

Agenda Item No. 2 - Discussion on the proposals submitted for reconsideration.

(1) M/s K.L. Energy & Coal Benefication Private Limited, Village – Dhejari, District – Raigarh (C.G.) The Project proponent submitted application (Form-I, Project Report) for prescribing Terms of Reference (TOR) for preparing draft EIA report for Coal Beneficiation Plant of capacity 0.9 million tonnes per year (Output Basis) and Power Plant of 17 MW. The case was considered in the fourth meeting of SEAC held on 3 rd May, 2008. As the case was already being considered at Ministry of Environment and Forests level, the Committee then decided to consider the case after receipt of the case from Ministry of Environment & Forest, Government of India. Ministry of Environment & Forest, Government of India has forwarded the case to SEIAA/SEAC, Chhattisgarh vide letter no. J-11015/17/2008-IA.II (M) dated 13/06/2008. The application submitted was re- considered in eighth meeting of SEAC, Chhattisgarh held on 30th June 2008. The brief of the project is as follows: Proposed Site Khasra No. 47/1, 49/2, 51/3, 54/1, 59/1 , 60/3 Village – Dehjari, Kharsiya , Distt. Raigarh (CG) Product and Production 17 MW Power Plant Capacity 0.9 Million tonnes per year Coal Washery (Output Basis) Proposed Area 27 Acres Ash dyke Proposed 3 Acre Proposed Cost Rs. 4850.00 Lacs. Activity falls under the 1(d) & 2(a) Schedule of EIA Notification, 2006

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 1 Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the project proponent to submit the requisite information/documents. Project proponent submitted the desired information on 30/07/2008. The proposal was again discussed in tenth meeting of SEAC Chhattisgarh on 19/08/2008. Committee then decided to ask the project proponent to present the case. Project proponent made presentation in 15th meeting on 22nd October 2008 of SEAC Chhattisgarh. Committee then decided to ask the project proponent to submit the additional information/documents. Project proponent submitted the desired information on 01/12/2008. The proposal was reconsidered in 19th meeting on 26/12/08 of SEAC Chhattisgarh. The Committee was unanimously of the opinion that the study area should cover an area of 10 km radius around the proposed site and surface water, ground water, soil, noise and ambient air quality should be monitored at-least at eight locations around the proposed site. The proposed project does not fulfill the criteria as mentioned in general condition of Schedule of EIA Notification, 2006, hence falls under Category ‘B’. Based on the consideration of the documents submitted, the presentation made by the project proponent and discussion held, the Committee decided that the proposed project should be considered as ‘B1’ category and prescribed the Terms of Reference (TOR) for preparing draft EIA report for the above-mentioned project. The prescribed Terms of Reference (TOR) for preparing draft EIA report is enclosed as Annexure-I. (2) M/s Bhilai Entertainment World Developers Private Limited, Site: Opposite Surya Vihar, Junwani, Bhilai Distt. Durg, (CG). The Project proponent submitted application (Form-I, Form IA and Conceptual plan) for Environment Clearance to Ministry of Environment & Forest, Government of India on 06/11/2007. The Ministry of Environment & Forest, Government of India has forwarded the case to SEIAA/SEAC, Chhattisgarh. The Project proponent also submitted additional sets of application (Form-I, Form IA and Conceptual plan) for Environment Clearance to SEIAA, Chhattisgarh on 30/06/2008. SEAC, Chhattisgarh considered the application in tenth meeting held on 19th July 2008. The Project Proponent has proposed to establish Mall, Multiplex, Hotel and office complex. It has Retail Shopping Area, Entertainment Zone, Food Court, 4 Screen Multiplex, 58 Roomed Hotel and Office Block. The site is situated at khasara nos. 744/3 and 762/2, P.H. 15, opposite Surya Vihar, Junwani, Bhilai, District- Durg (CG). Total land area is 19700 sqm. Proposed Cost of the project is Rs. 117 Crores. Municipal Corporation, Bhilai has approved the building plan. Approval from Nagar Tatha Gram Nivesh Department, Government of Chhattisgarh, Durg has been obtained. Built-up area will be as follows: - Total built-up area = 33123.61 sqm  Proposed Ground Coverage of Building – 5886.67 sqm  Permissible Ground Coverage of Building – 5910.00 sqm  Proposed FAR @1.68 – 33123.61 sqm  Permissible FAR @ 1.75 – 34475.00 sqm  Total Parking Area – 21163.00 sqm  Two basements and six floor (Basement I – 7505.4 sqm, Ground floor – 5886.67 sqm, First floor – 6249.44 sqm, Second floor – 3620.88, Forth floor – 3980.31 sqm, Fifth floor – 3100.70 sqm and Sixth floor – 2780.20 sqm  Parking Area – Basement II – 7826.20 sqm, Second floor – 2741.24, Third floor – 2649.70 sqm, Forth floor – 2649.70 sqm, Fifth floor – 2649.70 sqm and Sixth floor – 2649.70 sqm  Services Area - Third floor – 2000.34 sqm  Total Height of the Building – 27 m

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 2  Total water requirement is 360 cum/day (Fresh + Recycled). Water will be supplied through Municipal water supply and Bore wells. 203-cum/day effluent will be generated. 225-cum/day capacity Sewage Treatment Plant comprise of Collection Sump, Primary Settling Tank, SAFE Reactor, Secondary Settling Tank, UV Treatment, Sludge Holing Tank, Filter Pres, Filtration Unit, Activated Carbon Filter, Treated Water Tank, Softner, Storage Tank will be installed. The estimated total quantity of solid wastes generated would be 1000 kg/day. Rain Water Harvesting pits of 7 nos. (Size 3.0 m dia and 4.0 m depth) will be provided. Total area provided for parking is 21163 sqm (668 ECS). Power requirement is 5.8 MW through CSEB and power back up will be 5 x 1500 KVA and 1 x 1250 KVA D.G. Sets. Capital cost of the project is Rs. 117.00 Crores. Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the Project proponent to submit the additional information/documents and present the case before SEAC, Chhattisgarh. Project proponent made presentation in 13th meeting on 22/09/08 of SEAC Chhattisgarh. Committee then decided to ask the project proponent to submit the additional information/documents. Project proponent submitted the desired information on 04/12/2008. The proposal was reconsidered in 19th meeting on 26/12/08 of SEAC, Chhattisgarh. Committee, after considering the proposals regarding management of land degradation, water pollution, air pollution, noise pollution, waste management, plantation, rainwater harvesting, storm water management, power requirement, energy conservation, environmental impact mitigation measures, safety measures socio- economic aspects, employment etc. awarded “Silver” grading to the project and recommended for grant of Prior Environmental Clearance for building construction, subject to fulfillment of terms and conditions enclosed as Annexure-II. (3) Jindal Electricity Generation Private Limited, Village – Moulimuda, Tehsil – Baghbehera, District – Mahasamund (C.G.) M/s Jindal Electricity Private Limited has proposed to set up a Biomass Based Power Project of 8 MW capacity at Village – Moulimuda, Tehsil – Baghbehera, District – Mahasamund (C.G.). The Project proponent had submitted application for prescribing Terms of Reference (TOR) for preparing draft EIA report for Environment Clearance to Ministry of Environment & Forests, Government of India. Ministry of Environment & Forests, Government of India prescribed the Terms of Reference (TOR) for preparing draft EIA report for Environment Clearance vide letter no. J-13012/165/2007-IA-II(T) dated 20/11/2007. Ministry of Environment & Forests, Government of India has forwarded the case to SEIAA/SEAC, Chhattisgarh vide letter no. J-13012/165/2007-IA- II(T) dated 18/07/2008. The Public Hearing was held on 12/06/2008 at Govt. Primary School, Village – Moulimuda, Tehsil – Baghbehera, District – Mahasamund (C.G.). The project proponent has prepared final Environment Impact Assessment Report after public hearing and submitted the application for environmental clearance to SEIAA, Chhattisgarh on 08/08/2008. The application submitted was considered in eleventh meeting of SEAC, Chhattisgarh held on 5th September 2008. Project proponent made presentation in the 15th meeting of SEAC, Chhattisgarh on 22/10/2008. Based on the consideration of the documents submitted and discussion held, the Committee decided to ask the project proponent to submit the additional information/documents. Project proponent submitted the information on 10/11/08 and reconsidered in 19th meeting on 26/12/08 of SEAC Chhattisgarh. The information submitted was not found complete. Committee then decided to ask the project proponent to submit the SPM datasheet. Committee decided that after receipt of the above mentioned information / documents, proposed activity should be considered. Project proponent should be intimated accordingly.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 3 (4) M/s Lanco Amarkantak Power Private Limited, Village- Pathadi, PO- Tilkeja, District- Korba (CG) The Project proponent submitted application Form-I and feasibility report for Environment Clearance on 04/06/2008. Project proponent was informed to submit application form –I A and Conceptual Plan with water allocation letter and area map on 23/06/2008. Accordingly PP submitted the application/information on 27/06/2008. The project proponent has proposed for the expansion of existing colony (145 Houses in Phase –I) by constructing additional 229 houses and swimming pool in Phase – II. The application was considered in the tenth meeting of SEAC, Chhattisgarh held on 19th July 2008. Project proponent along with their consultants made presentation in 13th meeting of SEAC, Chhattisgarh on 22nd September 2008. Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the project proponent to submit the additional information/documents. Project proponent submitted the information on 16/10/08 and 11/11/2008. The information submitted was reconsidered in 19th meeting on 26/12/08. The information submitted was not found complete. Committee noted that:-  RSPM is reported more than SPM. How?  SAF would be adopted instead of aeration tank.  Justification for selection of site for township may be considered ok.  It is reported that after secondary clarifier, mechanical filter press, pressures sand filter, activated carbon filter, chlorinator and clear water tank would be provided. The above are not reflected in the line diagram submitted. The capacity of sewage treatment plant in the line diagram is mentioned is 500 cum, which is not matching with the effluent generation.  The information regarding storm water collection/ treatment/ use not submitted. Committee decided to ask the project proponent to submit the following information/documents: -  Clarification regarding the data submitted with reference to RSPM and SPM.  Clarification regarding the quantity of water consumed, sewage generated, capacity of the sewage treatment plant and various units of sewage treatment plant (incorporating mechanical filter press, pressures sand filter, activated carbon filter, chlorinator and clear water tank etc.) with corrected drawings of sewage treatment plant.  The information regarding storm water collection/ treatment/ use.

Committee decided that after receipt of the above mentioned information / documents, proposed activity should be considered. Project proponent should be intimated accordingly.

(5) M/s. Balaji Metals & Minerals Private Limited, Works: Village-Dumarpara, Tehsil – Sakti, District- Janjgir-Champa (CG) Project proponent had applied for prior Environmental Clearance at Ministry of Environment & Forests, Government of India, New Delhi for increase in production capacity of Dolomine (60,000 TPA to 1,50,000 TPA) with crushing and screening for Dumarpara Dolomite mines, Tehsil - Shakti, District Janjgir-Champa (C.G.) having lease area 42.754 Ha. The proposal was considered by EAC (Mining) in 15th Meeting during 12 – 14th November 2007 for determination of TOR by Ministry of Environment & Forests, Government of India, New Delhi. TOR was issued vide letter No. J-11015 /589 /2007-IA.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 4 II (M) Dated 12/12/2007 by Ministry of Environment & Forests, Government of India, New Delhi. Project proponent had requested letter vide letter dated 14/04/2008 for amendment in issued TOR to Ministry of Environment & Forests, Government of India, New Delhi. Project proponent submitted that: -  In place of proposed production of 1,50,000 TPA, it has been wrongly termed as expansion of Dumarpara Dolomite mine for 60,000 TPA to 1,50,000 TPA.  Deputy Director (IA), Ministry of Environment & Forests, Government of India, New Delhi vide letter no. J-11015 /589 /2007-IA. II (M) dated 24/06/2008 informed the project proponent to take up the matter with the State Govt. of Chhattisgarh for any change in the status of mining proposal. Ministry of Environment & Forests, Government of India, New Delhi forwarded the proposal vide letter No. J-11015 / 589 /2007-IA. II (M) dated 24/06/2008 to SEIAA, Chhattisgarh.  The project proponent also submitted the application stating the above details to SEIAA, Chhattisgarh vide letter no. SBMMPL/SEIAA/08-09/01 dated 29/07/2008 regarding amendment in the issued TOR. The application submitted was considered by SEAC, Chhattisgarh in 11 th meeting held on 5th September 2008. Committee then noted that: -  Project proponent had applied for the grant of consent under Air (Prevention and Control of Pollution) Act, 1981 and Water (Prevention and Control of Pollution) Act, 1974 to CECB Raipur on 27/04/07.  Project proponent had applied for conducting Public Hearing as per the provisions of EIA Notification, 2006 to CECB, Raipur on 12/03/08.  Mean while project proponent also submitted the fresh application in From-I, Approved Mining Plan and Amended Mining Scheme vide letter no. SBMMPL/SEIAA/08-09/02 dated 25/08/2008 to SEIAA, Chhattisgarh. As per decision, the copy of the From-I, Approved Mining Plan and Amended Mining Scheme were circulated to the members. The proposal is for Dolomite Mine – 1,50,000 tonnes per annum capacity. The site is at Village-Dumarpara, Tehsil – Sakti, District- Janjagir-Champa. The cost of the project is Rs. 2.385 Crores. Total lease area is 42.754 ha. SEAC, Chhattisgarh considered the application in 12th meeting held on 12th September 2008. Committee then decided to ask the project proponent to submit the additional information/documents. Project proponent submitted the information on 17/11/2008. The information submitted was reconsidered in 19th meeting on 26/12/08. Committee decided to accept the request of the project proponent to consider the case as new proposal of 1.5 lacs TPA production of Dolomite mine (in place of expansion in production capacity from 60,000 TPA to 1,50,000 TPA). The committee also decided that the TOR issued by Ministry of Environment & Forests, Government of India, New Delhi vide letter No. J-11015 /589 /2007-IA. II (M) Dated 12/12/2007 would be applicable and remain unchanged. Project proponent should conduct EIA and Public Hearing as per the approved TOR. Project proponent should be intimated accordingly.

(6) M/s Essar Steel Limited, Works: Bailadila Iron Ore Benefication Plant, Palnar Road, Kirandul District – Dantewada (CG) The Project proponent submitted application (Form-I and Pre Feasibility Project Report) for prescribing Terms of Reference (TOR) for preparing draft EIA report for Environment Clearance on 09/07/2008. The project proponent has proposed 1x50 MW Captive Thermal Power Plant at Bailadila Benefication Plant, Palnar Road, Kirandul District – Dantewada (CG).

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 5 The application was considered in the tenth meeting of SEAC, Chhattisgarh held on 19th July 2008. Project proponent along with their consultants made presentation before SEAC, Chhattisgarh in 13th meeting on 22nd September 2008. During presentation project proponent submitted the information as desired vide letter dated 176/SEIAA-CG/EC/TPP/DNTWD/40/08 dated 09/09/2008. Committee then decided to ask the project proponent to submit additional information/documents. Committee also decided that as the proposed captive power plant is additional activity of the existing beneficiation plant, hence, three members Sub Committee would visit the site also. Project proponent submitted the desired information on 02/12/08. Sub Committee visited the site on 22/11/2008. During site visit of Sub Committee (Dr. Piyush Kant Pandey and Shri V.N. Singh) the top officials of the M/s Essar Steel also accompanied. The committee made a detailed inspection of the existing plant and the proposed power plant site. The sub- committee also visited the surrounding areas for the study of environmental susceptibilities. Accordingly, Sub Committee made the following recommendation/observations: - 1. The proposed site for the power plant comprises of a Hillock. The project proponent has informed that they plan to remove the hillock for sitting the power plant. This displacement of the Hillock appears environmentally undesirable. 2. The use of slime in the beneficiation process appears less than what was stipulated in the consent issued by Chhattisgarh Environment Conservation Board for the existing ore-beneficiation plant. 3. Greenbelt development in the existing plant is less than the required coverage. 4. Some internals roads are not yet tarred. The approach road is also not asphalted which creates dust due to heavy vehicular movement. 5. Project proponent should consider some optimization in the land requirement. The information submitted and the inspection report of the Sub-Committee was discussed in 19th meeting on 26/12/08 of SEAC Chhattisgarh. The Committee was unanimously of the opinion that the study area should cover an area of 10 km radius around the proposed site and surface water, ground water, soil, noise and ambient air quality should be monitored at-least at eight locations around the proposed site. The proposed project does not fulfill the criteria as mentioned in general condition of Schedule of EIA Notification, 2006, hence falls under Category ‘B’. Based on the consideration of the documents submitted, the presentation made by the project proponent and discussion held, the Committee decided that the proposed project should be considered as ‘B1’ category and prescribed the Terms of Reference (TOR) for preparing draft EIA report for the above-mentioned project. The prescribed Terms of Reference (TOR) for preparing draft EIA report is enclosed as Annexure-III. (7) M/s Rajat Power & Steel Private Limited, Plot No. 3-4 A, Industrial Area, Village- Sarora, Dist. – Raipur (C.G.) The Project proponent submitted application (Form-I and Pre-feasibility Report) for Environment Clearance. Project proponent has proposed to install an Oil Fired Rolling Mill (in Phase –I) of capacity - 21000 Tonnes Per Annum and Induction Furnace (in Phase –II) of capacity 21000 Tonnes Per Annum at Plot no. - 3-4A, Industrial Area Sarora, Raipur. SEAC, Chhattisgarh considered the application in tenth meeting held on 19th July 2008. Project proponent was present in 14th meeting of SEAC Chhattisgarh for presentation. Project proponent informed the committee that some more time would be required for submission of information/documents. Project proponent requested the

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 6 committee that the presentation should be made after compilation of the requisite information/documents. Hence, committee then decided to postpone the presentation for the next meeting. Project proponent made presentation in the 15th meeting on 22/10/2008. Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the project proponent to submit the additional information. Project proponent submitted the information on 10/12/2008. The information submitted was reconsidered in 19th meeting on 26/12/08 of SEAC, Chhattisgarh. Draft Guidelines of B category projects for considering as B1 or B2 was discussed in the 12th meeting. As per para 7 (i) I of Environment Impact Assessment, Notification, 2006, Ministry of Environment & Forests, Government of India, New Delhi has to issue guidelines for categorization of projects into B1 or B2. The guidelines to be issued by Ministry of Environment & Forests, Government of India, shall be final and binding to SEIAA/SEAC Chhattisgarh. After deliberation committee then decided that finalization of guidelines by SEAC for categorization of B1 & B2 projects is not necessary. The projects/proposals being put up for scrutinizing / scoping/appraisal shall be considered as B1 & B2 category depending up on the nature and location specificity of the project/ proposal case-to-case basis. Para 7 (i) I -Stage (1) – Screening of Environment Impact Assessment, Notification, 2006 states that “in case of category ‘B’ projects or activities, this stage will entail the scrutiny of an application seeking prior environmental clearance made in Form I by the concerned State level Expert Appraisal Committee (SEAC) for determining whether or activity requires further environmental studies for preparation of an Environmental Impact Assessment (EIA) for its appraisal prior to the grant of environmental clearance depending up on the nature and location specificity of the project.” The categorization of category ‘B’ projects or activities in to B1 or B2 lies in the purview of State level Expert Appraisal Committee (SEAC). The Committee considered the proposed activity from the point of view of its location (industrial area)., size and nature i.e. Rolling Mill and Induction Furnace of comparatively small capacity and felt that no significant impact on the surrounding is anticipated. Based on these considerations, the committee recommends to grant the project ‘B2’ category. It is therefore recommended to grant Environmental Clearance, subject to fulfillment of the following terms and conditions:-  Stack of rolling mill and induction furnace should be at the farthest possible point from the ring road.  Suction hood followed by spark arrestor, air base cooling system and bag filter should be installed to control gases emission from induction furnace.  Scrubber of adequate capacity should be installed to control the gaseous emission from the reheating furnace of rolling mill.  Outlet emission of particulate matter from stack/air vents would be less than 50 mg/NM3.  A closed cycle cooling tower should be provided for 100% recycling of the water in induction furnace and rolling mill.  Settling tank of adequate capacity should be installed for treatment of effluent generated from rolling mill and zero discharge condition should be maintained all the time.  Regular maintenance of the equipments should be done to control any possible noise pollution. Earplugs should be provided to all the employees working in high noise area.  All internal roads should be concrete and asphalted.  Stack height shall not be less than 35 m for rolling mill and 30 m for induction furnace.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 7  Low NOx burners should be installed.  Mill scales should be disposed off safe and scientific manner.  Adequate green belt in minimum 35% area should be developed all along the plant premises.  Only oil-fired furnace should be installed for rolling mill and good quality furnace oil should be used. No coal should be used.  Adequate funds shall be allocated for undertaking Socio-Economic activities (community welfare, environmental development activities apart from committed plantation) and in any case it shall not be less than 5% of the net profit.

SEIAA may be informed accordingly.

(8) M/s. SKS Ispat & Power Limited, Siltara Industrial Growth Center, Siltara, Raipur (C.G.) The project proponent submitted application (Form-I and Project Report) for prescribing Terms of Reference (TOR) for preparing draft EIA report for Environment Clearance on 23/08/08 for 0.96 MTPA Coal Washery at Village- Siltara, Block- Dharsiwa, District – Raipur (C.G.). The application submitted was considered in 12th meeting of SEAC, Chhattisgarh held on 12th September 2008. Project proponent made presentation in the 17th meeting of SEAC, Chhattisgarh on 29/11/2008. Based on the consideration of the documents submitted and discussion held, the Committee decided to ask the project proponent to submit the additional information. Project proponent submitted the information on 10/12/2008. The information submitted was reconsidered in 19th meeting on 26/12/08 of SEAC Chhattisgarh. Based on the consideration of the documents submitted, presentation made and discussion held, the Committee decided that a sub Committee comprising of three members should visit the site. After visit of three members Sub Committee, it should be placed before the Committee for further consideration. Project proponent should be intimated accordingly. (9) M/s Pharhada Lime Stone Mine, Works: Village-Pharhada, Tehsil-Simga, District- Raipur (C.G.) The Project proponent submitted application (Form-I, Feasibility Report and approved Mining Plan) for prescribing Terms of Reference (TOR) for preparing draft EIA report on 26/08/08 and 12/09/08 for mining of Lime Stone of capacity 60000 Tonnes per year at Khasra No. 1732/1, 1727/1 (Govt. revenue land) at Village-Pharhada, Tehsil- Simga, District- Raipur (C.G.). Lease Area is 21.373 ha. Lime Stone in 21.373 ha. Mining started from 20/10/2004. Mining plan was approved in 1995. Mining lease was granted from 23/12/1995 to 22/12/2015 for a period of 20 years. The case was considered in the sixteenth meeting of SEAC, Chhattisgarh held on 23rd October 2008. Committee asked to submit the desired information/documents. Project proponent submitted the information on 17/12/2008. The information submitted was reconsidered in 19th meeting on 26/12/08 of SEAC Chhattisgarh. The Committee decided to ask the project proponent to present the case along- with issues like site details, existing condition, land document, permission from concerned authority, power supply, water supply, materials balance, top soil, over burden, rejects details, mining process / flow sheet, water source, consumption with water balance and effluent generation, treatment and reuse, emission sources and emission control systems, solid waste / hazardous waste management, DG Set and noise pollution control, greenbelt, fugitive emission, storage facility, proposed monitoring

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 8 stations details along-with justification for selection, proposed EMP along-with community welfare/eco development works to be carried out and other relevant issues along-with proposed TOR/EMP. Project proponent should be intimated accordingly.

(10) M/s Gupta Infrastructure (India) Private Limited, Khasra no. 515, Scheme no. 32, Pandari Road, Devendra Nagar, Raipur The project proponent had previously submitted application (Form-I, Form IA and EIA/EMP) for Environment Clearance to Ministry of Environment & Forests, Government of India. Project proponent has also submitted application (Form-I, Form IA and EIA/EMP) for Environment Clearance to SEIAA on 24/04/2008 and 03/06/2008. As the proposal was already being considered at Ministry of Environment and Forests, Government of India level, SEIAA, Chhattisgarh informed the project proponent vide letter dated 04/06/2008 that the case could be considered after receipt of the case from Ministry of Environment & Forests, Government of India. Ministry of Environment & Forests, Government of India has forwarded the case to SEIAA/SEAC, Chhattisgarh vide letter dated 12th June 2008. The project proponent has applied for Environmental Clearance for City Center with Mall and Multiplex. The brief of the project is as follows: - Name of the Project Gupta Velocity Arcade, M/s Gupta Infrastructure (India) Private Limited Proposed Site Khasra no. 515, Scheme no. 32, Pandari Road, Devendra Nagar, Raipur Proposed Activity City Center with Mall, Star Hotel and Multiplex theaters, which include: - Star Hotel of 3 Floors X 1 Building, 80 Rooms 5 Screen Multiplex Screen 1- 356 seats. Screen 2- 324 seats. Screen 3–173 seats. Screen 4- 204 seats Screen 5- 208 seats. Total Multiplex Seats =1265 Seats. Offices 20, Shops 120, Shopping at ground floor. Hyper market at lower ground floor. Area of the Project Total area of plot - 23,082.00 sqm FSI - 2.00 Net area available - 46,164.00 sqm Green belt area - 50 % of open area

Floors B/U Balcony Area in sqm Area sqm Lower Ground Floor 8833.819 - Ground Floor 7305.317 - First Floor 8033.598 935.44 Second Floor 6066.110 906.74 Third Floor 8048.987 828.24 Fourth Floor 7665.225 828.24 Water requirement The total water consumption will be 700 KLD. Total fresh water and Water Supply consumption would be 460 KLD (supply by Municipal Source Corporation, Raipur/RDA Bore wells). During rainy season about 200 KLD rooftop water collected in raw water sumps shall be used for domestic purpose.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 9 Effluent Treatment Total waste water generation shall not be more than 232 KLD. Arrangement The STP capacity will be 250 KLD. The sewage treatment plant will be based on the rotating media aerobic attached growth process i.e. the Rotating Bio disk Contactor system followed by secondary lamella settler. Clear effluent will flow into a chlorine contact sump cum filter feed sump where chlorine will be dosed in the form of Sodium Hypo chlorite for dis-infection and trace organic destruction. Disinfected wastewater will be pumped through the tertiary treatment columns. The pressure sand filter which contains a specially designed bed of graded quartz sand will remove residual colloids while the activated carbon column remove the residual dissolved trace organic compounds thereby rendering the water almost free of organic contamination. The activated carbon will also remove excess chlorine residuals resulting from hypochlorite dosing. Treated effluent will be used for tollet flushing, cooling make-up, gardening and plantation within premises. 

Solid wastes About 760 Kg/day Total Parking 789 Nos. cars Power Requirement 08 MW through CSEB. Power Backup 4 x1500 KVA D.G. Sets Rain Water Rain Water harvesting technique is proposed. Rooftop water Harvesting from the building will be directed to proposed raw water sumps after first flush for domestic utilization, which will replace to the extent of 100 % of Municipal Corporation, Raipur water in rainy days. Proposed Cost Rs. 131.00 Crores Approved Building Municipal Corporation, Raipur has approved the building plan. Plan Approval from Nagar Tatha Gram Nivesh Department, Government of Chhattisgarh, Raipur has been obtained. The application submitted was considered in eighth meeting of SEAC, Chhattisgarh held on 30th June 2008. The Committee then decided to ask the project proponent to submit the various information/documents. The project proponent submitted the information/documents vide letter dated 12/08/2008. The information submitted was considered in eleventh meeting held on 5th September 2008, and decided to present the case before SEAC, Chhattisgarh with requisite information/documents/issues. Project proponent made presentation in the 15th meeting on 22/10/2008. Based on the consideration of the documents submitted and discussion held, the Committee decided to ask the project proponent to submit the additional information/documents. Project proponent submitted the desired information on 22/12/08. The information submitted was reconsidered in 19th meeting on 26/12/08 of SEAC, Chhattisgarh. Committee also noted that project proponent had applied for public hearing to Chhattisgarh Environment Conservation Board as per the provisions of EIA Notification, 1994. The public hearing was conducted on 18/10/2006 as per provisions of EIA Notification, 1994and public hearing documents were sent by Chhattisgarh Environment Conservation Board to Ministry of Environment & Forests, Government of India vide letter dated 26/12/06. Chhattisgarh Environment Conservation Board granted No Objection Certificate on 03/02/2007. Committee, after considering the proposals regarding management of land degradation, water pollution, air pollution, noise pollution, waste management, plantation, D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 10 rainwater harvesting, storm water management, power requirement, energy conservation, environmental impact mitigation measures, safety measures socio- economic aspects, employment etc. awarded “Silver” grading to the project and recommended for grant of Environmental Clearance for building construction, subject to fulfillment of terms and conditions enclosed as Annexure-IV.

(11) M/s. Bihaobod Quartzite & Sand Mine Bihaobod, Tehsil & District- Rajnandgaon, Works: Village – Bihaobod, Tahsil & District – Rajnandgaon The Project proponent submitted application (Form-I, Approved Mining Plan and Project Report) for Environment Clearance on 09/07/2008 for Quartzite and Silica sand mining of 8000 TPA capacity in 6.88 ha area. Project proponent has informed that they have small mining projects i.e. approx. 666 metric tonnes / month. Only Quartzite is excavated manually. No drilling, blasting and crushing operations is carried out at mines. No machinery is involved during extraction. Project proponent has requested for categorization the proposal as B -2 category. Indian Bureau of Mines, Nagpur had approved the mining plan on 13/04/2005 for quartzite mining 2000 metric tonnes/year. Mining lease was sanctioned on October 2005 for 6.88 ha SEAC, Chhattisgarh considered the application in tenth meeting held on 19th August 2008. Committee then decided to ask the project proponent to present the case along with the relevant information/documents in 14th meeting of SEAC, Chhattisgarh on 23/09/08. Project proponent did not come for the presentation. The committee decided that after receipt of the request for presentation from project proponent, appropriate decision would be taken. Project proponent has requested vide letter dated 14/10/08 for withheld of their application due to following reason: -  Gram Panchayat has acquired 2.0 ha land out of approved 6.880 ha lease area for the construction of Village road under “Rashtriya Rojgar Yojna”, therefore Gram Panchayat has requested the Government to reduce the 2.0 ha land from sanctioned lease. Therefore, committee permitted to withhold the application on the request of the project proponent and also recommended for delisting of the proposal. The proposal would be reconsidered after receipt of the requisite information/documents as desired vide letter date 09/09/2008 and request for presentation from project proponent. (12) M/s Dolomite Mining Corporation, Village - Khamaria, Tehsil – Jaijaipur Distt. Janjgir-Champa (CG) The project proponent submitted application (Form-I, Mining Plan and Project Pre- feasibility Report) for prescribing Terms of Reference (TOR) for preparing draft EIA report. The application was considered in the tenth meeting of SEAC, Chhattisgarh held on 19th July 2008. SEAC, Chhattisgarh then decided that project proponent should be asked to present the case before SEAC, Chhattisgarh along-with relevant information/documents. Accordingly, on 22nd September 2008 project proponent along with their consultants present before SEAC, Chhattisgarh. The project proponent has proposed to increase the production capacity of existing dolomite mine from 60,000 TPA to 1,50,000 TPA. The total mine lease area is 20.412 ha. There is no change in existing lease area for proposed expansion. Before the start of presentation, the project proponent then informed the committee that there were various discrepancies in the application submitted and documents submitted along with application to SEIAA, Chhattisgarh. The application/documents are required to be revised. Therefore, the project proponent then requested the committee to permit them for withdrawal of the application submitted. As per direction of Committee, the proposal was again discussed in 19th meeting of SEAC Chhattisgarh on 26/12/08. After deliberation, the committee permitted for withdrawal of

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 11 the application on the request of the project proponent. Committee also recommended for delisting of the proposal. (13) M/s Goyal Energy & Steel Private Limited, Tatibandh Chowk, Ring Road no. 02, District - Raipur (C.G.) The Project proponent submitted application (Form-I and Project Report) for Environment Clearance on 08/09/08 for the expansion of Rolling Mill from 21000 MTPA to 61000 MTPA capacity. The brief of the project is as follows:

Site Tatibandh Chowk, Ring Road no. 02 Dist.Raipur (C.G.) Capacity Existing Rolling Mill – 21000 MTPA Expansion Rolling Mill – 40000 MTPA Total - 61000 MTPA Cost Rs. 289.00 lacs Lease Area 2.052 Ha. Activity falls under the Schedule of 3(a) EIA Notification, 2006

SEAC, Chhattisgarh considered the application in 12th meeting held on 12th September 2008. Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the project proponent to submit additional information/documents. Committee also decided that three members Sub Committee would visit the site. Sub committee visited the site on 06/12/2008. During site visit of Sub committee the top officials of the M/s Goyal Energy & Steel Private Limited also accompanied. The committee made a detailed inspection of the existing plant and the expansion Rolling Mill site. The sub-committee also visited the surrounding areas for the study of environmental susceptibilities. Accordingly the following recommendation/observations are made: 1. Expansion work of the entire project is completed without the Prior Environmental Clearance. 2. At the time of inspection the industry was found to be running without a valid “Consent to operate”. 3. No pollution control measures have been provided in the industry. 4. Internal roads are not tarred. 5. Green belt coverage is far less than the stipulated norms and consent to establish conditions. 6. The stack emission monitoring has never been conducted and hence the performance of the industry cannot be evaluated as the industry was on shutdown mode on the day of inspection.

Project proponent submitted the desired information on 05/12/08. The information submitted and the inspection report of the sub-committee was discussed in 19th meeting on 26/12/08 of SEAC Chhattisgarh. After detailed deliberation following decision was taken by the SEAC, Chhattisgarh: -  PP has already completed the expansion, so the facts should be brought to the knowledge of SEIAA, Chhattisgarh and seek guidance for further course of action in this regard.

SEIAA may be informed accordingly.

(14) M/s Rija Steel & Power Private Limited, Village – Bana, Tehsil- Dharsiwa, District- Raipur (C.G.)

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 12 The project proponent submitted application (Form-I and Pre-feasibility Report) for Environment Clearance on 16/09/2008. It is an existing Rolling Mill of 15000 TPA capacity. The Project Proponent has proposed to expand the Rolling Mill by installing 10000 TPA additional capacity within the existing plant premises. The brief of the project is as follows: - Name of the Project M/s Rija Steel & Power Private Limited, Proposed Site Village – Bana, Tehsil- Dharsinwa, District- Raipur (C.G.) Production Capacity Existing Rolling Mill 15000 TPA Expansion of Rolling Mill 10000 TPA Total capacity after expansion – 25000TPA Proposed Cost Rs. 4.4 Crores Activity falls under 3 (a) the Schedule of EIA Notification, 2006 SEAC, Chhattisgarh considered the application in Sixteenth meeting held on 23rd October 2008. Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the project proponent to submit additional information/documents. Committee also decided that three members Sub Committee would visit the site also. Sub committee visited the site on 06/12/2008. During site visit of Sub committee the representatives of the Rija Steel & Power Private Limited also accompanied. The committee made a detailed inspection of the existing plant and the proposed Rolling Mill site. The sub-committee also visited the surrounding areas for the study of environmental susceptibilities. Accordingly the following recommendation/observations are made: 1. Internal roads are not tarred and the house keeping of the industry is poor. 2. Green belt coverage is far less than the stipulated norms and consent to establish conditions. 3. The stack emission monitoring has never been conducted and hence the performance of the industry cannot be evaluated as the industry was on shutdown mode on the day of inspection. The information submitted and the inspection report of the sub-committee was discussed in 19th meeting on 26/12/08 of SEAC Chhattisgarh. After detailed deliberation, the Committee decided to ask the project proponent to present the case with following details and accordingly, proposed activity should be considered as ‘B1 or B2’ category: -  Layout plan and area map of 10 km radius showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines, stone crushers and other polluting sources etc.  Site details: existing condition, land document, permission from concerned authority.  Details of raw materials and fuel supply sources, power supply source, water supply source (with permission of State Government for water allocation), materials balance, manufacturing process / flow sheet, water consumption with water balance, effluent generation, treatment and reuse, fuel consumption, type of fuel, emission sources and emission control system, fugitive emission control system, storage yards, solid waste / hazardous waste management.  DG Set and noise pollution control, greenbelt, proposed monitoring stations details along-with justification for selection.  Commitment for compliance of observation made by Sub-Committee.  Proposed EMP along-with community welfare/eco development works to be carried out and other relevant issues along-with proposed TOR. Project proponent should be intimated accordingly.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 13 (15) M/s Charbhuja Gold Cement, Village – Gondpendri, District – Durg (C.G.) The Project proponent submitted application (Form-I and Project Report) for Environment Clearance on 16/09/08. It is an existing Cement Clinker Grinding Unit of 100 TPD capacity. The Project Proponent has proposed to expand the unit by adding 350 TPD capacity. The brief of the project is as follows:- Proposed Site Village – Gondpendri, District – Durg (C.G.) Capacity Existing - Clinker Grinding 100TPD Expansion- Clinker Grinding 350 TPD Total After Expansion– Clinker Grinding 450 TPD Proposed Cost Rs. 4.8843 Crores Area 12.12 acres. Activity falls under the Schedule of 3 (b) EIA Notification, 2006

SEAC, Chhattisgarh considered the application in Sixteenth meeting held on 23rd October 2008. Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the project proponent to submit additional information/documents. Committee also decided that three members Sub Committee would visit the site also. Sub committee visited the site on 07/12/2008. During site visit of Sub committee the representatives of the M/s Charbhuja Gold Cement also accompanied. The committee made a detailed inspection of the existing plant and the proposed Cement Plant site. The sub-committee also visited the surrounding areas for the study of environmental susceptibilities. Accordingly the following recommendation/observations are made:  Safety rules and Personal Protective Equipments are not being provided / used by the workers.  Noise levels are high near the ball mills.  Internal roads are not tarred.  Green belt coverage need to be augmented.  Stack emission monitoring may be done regularly. The information submitted and the inspection report of the sub-committee was discussed in 19th meeting on 26/12/08 of SEAC, Chhattisgarh. After detailed deliberation, the Committee decided to ask the project proponent to present the case with following details: -  Layout plan and area map of 10 km radius showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines, stone crushers and other polluting sources etc.  Site details: existing condition, land document, permission from concerned authority.  Details of raw materials and fuel supply sources, power supply source, water supply source (with permission of State Government for water allocation), materials balance, manufacturing process / flow sheet, water consumption with water balance, effluent generation, treatment and reuse, fuel consumption, type of fuel, emission sources and emission control system, fugitive emission control system, storage yards, solid waste / hazardous waste management.  DG Set and noise pollution control, greenbelt, proposed monitoring stations details along-with justification for selection.  Commitment for compliance of observation made by Sub-Committee.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 14  Data regarding stack emission and ambient air quality within premises.  Proposed EMP along-with community welfare/eco development works to be carried out and other relevant issues along-with proposed TOR. Project proponent should be intimated accordingly.

(16) M/s Sapna Steels, Village – Sarora, Tehsil & District- Raipur (C.G.) The Project proponent submitted application (Form-I and Pre-feasibility Report) for Environment Clearance on 19/09/2008. SEAC, Chhattisgarh considered the application in Sixteenth meeting held on 23rd October 2008. It is an existing Rolling Mill of 14000 TPA. The Project Proponent has proposed to expand the Rolling Mill by installing 25000 TPA additional capacity in the existing premises. The brief of the project is as follows: - Name of the Project M/s Sapna Steels Proposed Site Village – Sarora, Tehsil & District- Raipur (C.G.) Production Capacity Existing Rolling Mill 14000 TPA Expansion of Rolling Mill 25000 TPA Total capacity After Expansion – 39000TPA Proposed Cost Rs. 1.75 Crores Activity falls under the 3 (a) Schedule of EIA Notification, 2006

SEAC, Chhattisgarh considered the application in Sixteenth meeting held on 23rd October 2008. Based on the consideration of the documents submitted and discussion held, the Committee then decided to ask the project proponent to submit additional information/documents. Committee also decided that three members Sub Committee would visit the site also. Sub committee visited the site on 06/12/2008. During site visit of Sub committee the representatives of the M/s Sapna Steels also accompanied. The committee made a detailed inspection of the existing plant and the proposed Rolling Mill site. The sub-committee also visited the surrounding areas for the study of environmental susceptibilities. Accordingly the following recommendation/observations are made:  Internal roads are not tarred.  Green belt coverage is far less than the stipulated norms and consent to establish conditions.  The stack emission monitoring has never been conducted and hence the performance of the industry cannot be evaluated as the industry was on shutdown mode on the day of inspection.  This industry is steel using the coal as a fuel. This is likely to cause heavy pollution hence; they may consider replacing the coal based technology with the oil fired with latest pollution control measures viz. low NOx burners and APC. The information submitted and the inspection report of the sub-committee was discussed in 19th meeting on 26/12/08 of SEAC, Chhattisgarh. After detailed deliberation, the Committee decided to ask the project proponent to present the case with following details and accordingly, proposed activity should be considered as ‘B1 or B2’ category: -

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 15  Layout plan and area map of 10 km radius showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines, stone crushers and other polluting sources etc.  Site details: existing condition, land document, permission from concerned authority.  Details of raw materials and fuel supply sources, power supply source, water supply source (with permission of State Government for water allocation), materials balance, manufacturing process / flow sheet, water consumption with water balance, effluent generation, treatment and reuse, fuel consumption, type of fuel, emission sources and emission control system, fugitive emission control system, storage yards, solid waste / hazardous waste management.  DG Set and noise pollution control, greenbelt, proposed monitoring stations details along-with justification for selection.  Proposal for replacing the coal based technology with the oil fired with latest pollution control measures viz. low NOx burners and APC.  Commitment for compliance of observation made by Sub-Committee.  During visit of Sub Committee project proponent assured for tarring/concreting the internal roads and plantation around premises. The action taken in this regard along with photographs.  Proposed EMP along-with community welfare/eco development works to be carried out and other relevant issues along-with proposed TOR. Project proponent should be intimated accordingly. (17) M/s Jhuradabri Quartize & Silica Sand Mine, Khasra No. 19, Village – Jhuradabri, Tehsil & District- Rajnandgaon (C.G.) The Project proponent submitted application (Form-I, Approved Mining Plan and Project Report) for the Environment Clearance on 24/09/2008 for Quartzite and Silica sand mining of maximum 12000 TPA capacity in 9.71 ha area at Khasra No. 19, Village – Jhuradabri, Tehsil & District- Rajnandgaon (C.G.). Project proponent has informed that mining lease was granted on 1987 vide letter no. 3-261/86/12/06 dated 15/01/87 by then Madhya Pradesh Government for a period of 20 years, for which environment clearance was given by Environment Planning and Co-ordination Organisation (EPCO), Bhopal. As the mining lease had expired on 14/01/2007, therefore for renewal of the mining lease, environmental clearance is required. Accordingly Project proponent has applied for grant of environmental clearance. Project proponent has requested for categorization the proposal as B -2 category. The case was considered in the sixteenth meeting of SEAC, Chhattisgarh held on 23rd October 2008. Project proponent submitted the information on 23/12/2008. The information submitted was reconsidered in 19th meeting on 26/12/08 of SEAC Chhattisgarh. The information submitted found incomplete with following respect:-  The clarification regarding production capacity is not clear. You have applied for mining up to 12000 TPA. The recently approved mining plan submitted reflects that the production will be maximum 6000 TPA. You have not submitted the approved mining plan for 12000 TPA capacity.  Year wise mining/ production data submitted by you reflect that in the year 2003. The production was 670.567 MT, which was more than 6000 TPA. You have not submitted copy of environmental clearance letter obtained as per provisions of Environment Impact Assessment Notification 1994 for this capacity expansion. The Committee decided to ask the project proponent to present the case along- with above information/documents and issues like layout plan, site details, existing condition, land document, permission from concerned authority, water supply, materials balance, top soil, over burden, rejects details, mining process / flow sheet, water source, consumption with water balance and effluent generation, treatment and reuse, emission sources and emission control systems, solid waste / hazardous waste management, DG D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 16 Set and noise pollution control, greenbelt, fugitive emission, storage facility, proposed monitoring stations details along-with justification for selection, proposed EMP along-with community welfare/eco development works to be carried out and other relevant issues along-with proposed TOR/EMP. Project proponent should be intimated accordingly.

Agenda Item No. 3- Any other issues with the permission of the Chairperson.

(1) M/s. Chhattisgarh Mineral Development Corporation Limited, Village – Visarpani, Tehsil – Sitapur, District- Sarguja, (Khasra No. 178/16,178/13, 178/13kh, 178/14,176 and 178, Lease Area 12.106 Ha. ) The Project proponent submitted application (Form-I, and Pre-Feasibility Report) for Environment Clearance on 30/07/08 for Bauxite mining of 50000 tonnes per annum capacity in 12.106 ha area. SEAC, Chhattisgarh considered the application in 12th meeting held on 12th September 2008. The Committee then decided to ask the project proponent to submit the requisite information/documents and present the case before SEAC, Chhattisgarh. Project proponent made presentation in the 18th meeting of SEAC, Chhattisgarh on 02/12/2008. The brief of the project is as follows:- Proposed Site Part of Khasra no. 178/16,178/13, 178/13kh,178/14,176 and 178 Village – Visarpani, Tehsil – Sitapur, District- Sarguja Proposed Production Capacity Bauxite Mine – 50000 Tonnes/Annum Proposed Cost Rs. 8.00 Lacs Lease Area 12.106 Ha. Mining Plan Approval Original Mining Plan was approved by IBM, Nagpur vide letter no. SRG/BX/MPLN-940/NGP dated 31/08/2006 and modified Mining Plan and Mine Closure Plan has been approved by IBM, Nagpur vide letter no. SRG/BX/MPLN-940/NGP dated 20/10/2008 for mining of Bauxite – 50000 Tonnes/Annum. Mining Lease Approval Mining lease has been approval by GoCG vide letter no F3-6/2005 Raipur, dated 06/10/2006 and the agreement has been executed with GoCG on 27/12/2006. Lease period from 27/10/2006 to 26/10/2036 for 30 years. Draft Guidelines of B category projects for considering as B1 or B2 was discussed in the 12th meeting. As per para 7 (i) I of Environment Impact Assessment, Notification, 2006, Ministry of Environment & Forests, Government of India, New Delhi has to issue guidelines for categorization of projects into B1 or B2. The guidelines to be issued by Ministry of Environment & Forests, Government of India, shall be final and binding to SEIAA/SEAC Chhattisgarh. After deliberation committee then decided that finalization of guidelines by SEAC for categorization of B1 & B2 projects is not necessary. The projects/proposals being put up for scrutinizing / scoping/appraisal shall be considered as B1 & B2 category depending up on the nature and location specificity of the project/ proposal case to case basis. Accordingly the proposed activity was considered by committee. No significant impact on the surrounding environment due to mining activity proposed by project proponent. No National Park/ Wildlife Sanctuary/ Reserve Forest are located within 10 km radius of site.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 17 Based on the consideration of the documents submitted and discussion held in 18th meeting on 02nd December 2008 of SEAC, Chhattisgarh, the Committee decided that the proposed project should be considered as ‘B2’ category and recommendation for grant of Environmental Clearance would be considered after submission of information/documents as desired vide letter no. 275/SEAC-CG/EC/Mining/AMB/49/08 Raipur, dated 01/12/2008 in writing. The project proponent submitted the information/documents in writing vide letter dated 17/12/2008. The information/ documents was perused by the Committee and decided to recommend for the grant of Prior Environmental Clearance. SEIAA, Chhattisgarh should be informed accordingly.

(2) M/s. Chhattisgarh Mineral Development Corporation Limited, Village – Kesra, Tehsil – Sitapur, District- Sarguja (Khasra No.462, Lease Area 13.13 Ha.) The Project proponent submitted application (Form-I, and Pre-Feasibility Report) for Environment Clearance on 30/07/08 for Bauxite mining of 30000 tonnes per annum capacity in 13.13 ha area. SEAC, Chhattisgarh considered the application in 12 th meeting held on 12th September 2008. The Committee then decided to ask the project proponent to submit the requisite information/documents and present the case before SEAC, Chhattisgarh. Project proponent made presentation in the 18th meeting of SEAC, Chhattisgarh on 02/12/2008. The brief of the project is as follows:- Proposed Site Khasra no. 462, Village – Kesra, Tehsil – Sitapur, District- Sarguja Proposed Production Bauxite Mine – 20000 Tonnes/Annum (at the time of Capacity presentation it is informed that mining capacity will be respected to 20000 Tonnes/Annum, accordingly form-I would be revised) Proposed Cost Rs. 10.00 Lacs Lease Area 13.13 Ha. Mining Plan Approval Modified Mining Plan and Mine Closure Plan has been approved by IBM, Nagpur vide letter no. SRG/BX/MPLN-926/NGP dated 20/10/2008 for mining of Bauxite – 20000 Tonnes/Annum. Mining Lease Mining lease has been approval by GoCG vide letter Approval no F3-75/2003/12 Raipur, dated 17/04/2006 and the agreement has been executed with GoCG on 27/12/2006. Lease period from 26/07/2006 to 25/07/2026 for 20 years.

The Committee was unanimously of the opinion that the study area should cover an area of 10 km radius around the proposed site and surface water, ground water, soil, noise and ambient air quality should be monitored at-least at eight locations around the proposed site. The proposed project fulfills the criteria as mentioned in the Schedule of EIA Notification, 2006, hence falls under Category ‘B’. Based on the consideration of the documents submitted, the presentation made by the project proponent, discussion held and considering the cumulative effect on the environment due to all the three mines (proposed two other mines of project proponent with lease areas 9.0 ha and 20.34 ha contiguous to the boundary of this proposed mine lease area), the Committee then decided that the proposed project should be considered as ‘B1’ category and the Terms of Reference (TOR) for preparing draft EIA report for the above-mentioned project would be prescribed after submission of information/documents as desired vide letter no. 274/SEAC-CG/EC/Mining/AMB/50/08 Raipur, dated 01/12/2008 in writing. The project proponent submitted the information/documents in writing vide letter dated //2008. The information/documents was perused by the Committee and prescribed Terms of

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 18 Reference (TOR) for preparing draft EIA report for the above-mentioned project mentioned at Annexure -V Project proponent should be informed accordingly.

(3) M/s. Chhattisgarh Mineral Development Corporation Limited, Village – Kesra, Tehsil – Sitapur, District- Sarguja (Khasra No.711, Lease Area 20.34 Ha.) The Project proponent submitted application (Form-I, and Pre-Feasibility Report) for Environment Clearance on 30/07/08 for Bauxite mining of 50000 tonnes per annum capacity in 20.34 ha area. SEAC, Chhattisgarh considered the application in 12 th meeting held on 12th September 2008. The Committee then decided to ask the project proponent to submit the requisite information/documents and present the case before SEAC, Chhattisgarh. Project proponent made presentation in the 18th meeting of SEAC, Chhattisgarh on 02/12/2008. The brief of the project is as follows:- Proposed Site Khasra no. 711, Village – Kesra, Tehsil – Sitapur, District- Sarguja Proposed Production Bauxite Mine – 20000 Tonnes/Annum ( at the time of Capacity presentation it is informed that mining capacity will be respected to 20000 Tonnes/Annum, accordingly form-I would be revised) Proposed Cost Rs. 10.00 Lacs Lease Area 20.34 Ha. Mining Plan Approval Modified Mining Plan and Mine Closure Plan has been approved by IBM, Nagpur vide letter no. SRG/BX/MPLN-925/NGP dated 20/10/2008 for mining of Bauxite – 20000 Tonnes/Annum. Mining Lease Mining lease has been approval by GoCG vide letter Approval no F3-76/2003/12 Raipur, dated 01/04/2006 and the agreement has been executed with GoCG on 26/07/2006. Lease period from 26/07/2006 to 25/07/2026 for 20 years.

The Committee was unanimously of the opinion that the study area should cover an area of 10 km radius around the proposed site and surface water, ground water, soil, noise and ambient air quality should be monitored at-least at eight locations around the proposed site. The proposed project fulfills the criteria as mentioned in the Schedule of EIA Notification, 2006, hence falls under Category ‘B’. Based on the consideration of the documents submitted, the presentation made by the project proponent, discussion held and considering the cumulative effect on the environment due to all the three mines (proposed two other mines of project proponent with lease areas 9.0 ha and 13.13 ha contiguous to the boundary of this proposed mine lease area), the Committee decided that the proposed project should be considered as ‘B1’ category and the Terms of Reference (TOR) for preparing draft EIA report for the above-mentioned project would be prescribed after submission of information/documents as desired vide letter no. 273/SEAC-CG/EC/Mining/AMB/51/08 Raipur, dated 01/12/2008 in writing. The project proponent submitted the information/documents in writing vide letter dated //2008. The information/documents was perused by the Committee and prescribed Terms of Reference (TOR) for preparing draft EIA report for the above-mentioned project mentioned at Annexure -VI Project proponent should be informed accordingly.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 19 (4) M/s. Chhattisgarh Mineral Development Corporation Limited, Works: Village – Kesra, Tehsil – Sitapur, District- Sarguja (Khasra No.807, Lease Area 9.00 Ha) The Project proponent submitted application (Form-I, and Pre-Feasibility Report) for Environment Clearance on 30/07/08 for Bauxite mining of 35000 tonnes per annum capacity in 9.0 ha area. SEAC, Chhattisgarh considered the application in 12th meeting held on 12th September 2008. The Committee then decided to ask the project proponent to submit the requisite information/documents and present the case before SEAC, Chhattisgarh. Project proponent made presentation in the 18th meeting of SEAC, Chhattisgarh on 02/12/2008. The brief of the project is as follows:-

Proposed Site Khasra no. 807, Village – Kesra, Tehsil – Sitapur, District- Sarguja Proposed Production Bauxite Mine – 30000 Tonnes/Annum ( at the time of Capacity presentation it is informed that mining capacity will be respected to 30000 Tonnes/Annum, accordingly form-I would be revised) Proposed Cost Rs. 10.00 Lacs Lease Area 9.0 Ha. Mining Plan Approval Modified Mining Plan and Mine Closure Plan has been approved by IBM, Nagpur vide letter no. SRG/BX/MPLN-927/NGP dated 20/10/2008 for mining of Bauxite – 30000 Tonnes/Annum. Mining Lease Mining lease has been approval by GoCG vide letter Approval no F3-73/2003/12 Raipur, dated 01/04/2006 and the agreement has been executed with GoCG on 26/07/2006. Lease period from 26/07/2006 to 25/07/2036 for 30 years.

The Committee was unanimously of the opinion that the study area should cover an area of 10 km radius around the proposed site and surface water, ground water, soil, noise and ambient air quality should be monitored at-least at eight locations around the proposed site. The proposed project fulfills the criteria as mentioned in the Schedule of EIA Notification, 2006, hence falls under Category ‘B’. Based on the consideration of the documents submitted, the presentation made by the project proponent, discussion held and considering the cumulative effect on the environment due to all the three mines (proposed two other mines of project proponent with lease areas 20.34 ha and 13.13 ha contiguous to the boundary of this proposed mine lease area), the Committee decided that the proposed project should be considered as ‘B1’ category and the Terms of Reference (TOR) for preparing draft EIA report for the above-mentioned project would be prescribed after submission of information/documents as desired vide letter no. 272/SEAC-CG/EC/Mining/AMB/52/08 Raipur, dated 01/12/2008 in writing The project proponent submitted the information/documents in writing vide letter dated //2008. The information/documents was perused by the Committee and prescribed Terms of Reference (TOR) for preparing draft EIA report for the above-mentioned project mentioned at Annexure -VII Project proponent should be informed accordingly. (5) M/s Bhajanka Ferro Alloy, 66C, Industrial Area, Korba (C.G.) The proposal was received from CECB Raipur for guidance regarding the requirement of environment clearance. The project proponent submitted that the process is basically based on acid leaching and it does not fall under the category of secondary metallurgical process, so this process does not require environment clearance as per the

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 20 provisions of EIA Notification, 2006. Proposal was considered in 12 th meeting of SEAC, Chhattisgarh on 12/09/08. Committee then decided that: -  Hydrometallurgy is involved in the process, so the proposal should require environmental clearance.  The proposal falls under project /activity 3 (a), category ‘B’ (i) All toxic and heavy metal producing units <20,000 tonnes/ annum of the schedule of EIA Notification, 2006.  The project proponent should be asked to submit application for obtaining environment clearance from SEIAA, Chhattisgarh. Accordingly recommendations were forwarded to SEIAA, Chhattisgarh vide letter dated 22/10/08. The SEIAA, Chhattisgarh discussed the recommendation in the 5th meeting on 07/11/08. SEIAA Chhattisgarh felt that SEAC, Chhattisgarh may like to have a re-look and inform, to facilitate for further needful action. Subsequently, the proposal for re-look was received by SEAC, Chhattisgarh vide letter dated 10/12/08. The case was reconsidered in the 19th meeting of SEAC, Chhattisgarh held on 26/12/2008. After deliberation the committee decided as follows: -  The process proposed by the project proponent involves the extraction of heavy metals like Nickel and Cobalt In the form of Sulphates and Oxides. Hence the process falls under secondary metallurgical processing industry producing toxic and heavy metals less than 20,000 TPA. Therefore it falls under project /activity 3 (a), category ‘B’ (i) All toxic and heavy metal producing units <20,000 tonnes/ annum of the schedule of EIA Notification, 2006. SEIAA may be informed accordingly. Meeting concluded with thanks.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 21 Annexure - I

TOR For M/s K.L. Energy & Coal Benefication Private Limited, Village – Dhejari, District – Raigarh (C.G.) for Coal Beneficiation Plant of capacity 0.9 million tonnes per year (Output Basis) and Power Plant of 17 MW

Source of Raw Coal:  Linkage of coal/ assurance for supply of raw coal for power plant and for Coal Washery. Sources for supply of rice husk.  The annual throughput of coal for the three years;  The list of clients/companies along with copy of agreement between project proponent and companies to whom the washed coal to be supplied and rice husk to be procured;  The list of clients/ companies along with copy of agreement between project proponent and companies to whom the rejects / coal fines to be supplied/sold/returned and quantity reused in proposed power plant.  The mode of transport/conveyance of incoming unwashed coal and outgoing washed coal, rejects, coal fines, ash etc. Transportation routes showing villages, schools/colleges, residential areas etc. to be given.  The transportation through rail should be explored and proposal along with action plan to be submitted.

Project Description:  A brief description of the plant, the technology used and energy conservation;  All the coordinates of the plant site with toposheet;  Detailed material balance and water balance, break up of raw coal, washed coal, rejects, coal fines, break up of water requirement as per different activities in the washing operations and in power plant;  Source of water supplied for use in washery operations and power plant, sanction of the competent authority in the State Government;  Examine close circuit system for 100% recycling and reuse of the treated effluent in the washery operations or other uses such as irrigating the greenbelt within premises etc.;  Examine the air cooled technology for water conservation;  Examine zero effluent discharge conditions;  Submission of sample test analysis of:- I. Characteristics of coal to be washed – this includes grade of coal and other characteristics – ash, S and Hg level etc. II. Characteristics – and quantum of washed coal. III. Characteristics and quantum of coal waste rejects;

Description of the Environment:  Study of alternative sites should also be submitted so as to justify the selected site from environmental angle.  Study area should cover an area of 10 km radius around the proposed site;  A study area map of the core zone and 10 km area of the buffer showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines and other polluting sources, which shall also indicate the migratory corridors of fauna, if any, and the areas where endangered fauna and plants of medicinal and economic importance found in the area;  Contour map along with the site plan of the project and project land use area statement including land for project operations, such as coal handling

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 22 plant, washery, power plant, building infrastructure, effluent treatment plants, raw coal, washed coal, reject coal, coal fines, ash stock yard, colony, greenbelt, undisturbed area, natural topographical features (such as existing roads, drains/natural water bodies if any) to be left undisturbed, proposed diversion / re-channeling of natural drainage or water courses, if any;  One complete season site specific meteorological data;  Information regarding surface hydrology, water regime, hydrogeology and ground water regime;  Information regarding drainage pattern of the study area;  Topography of study area, clearly indicating, whether the site requires any filling? If so, details of filling, filling material, quantity of filling material required, filling material supply source and transportation etc. The filling material should be fly/bottom/pond ash of thermal power plants;  Location of any National Park, Wildlife Sanctuary, Reserve Forest, Protected Forest and Eco-sensitive zones, elephant/tiger reserve (existing as well as proposed), migratory routes, if any, within 10 km of the project site be specified and marked on the map duly authenticated by concerned Government department;  Map showing the core zone delineating the agricultural land (irrigated and un-irrigated), uncultivable land (as defined in revenue records), forest areas (as per records), grazing land and waste land;  Land use statement of the study area well as project area;  Collection of one complete season (non-monsoon preferably winter season 2008) primary base line data (along-with dates of monitoring) on environmental quality such as air (RPM, SPM, SOx & NOx), noise, water (surface and ground water), soil;  The monitoring be conducted as per Central Pollution Control Board’s guidelines and parameters for water testing for both ground water as per ISI and surface water as per Central Pollution Control Board guidelines;  Surface water, ground water, soil, noise and ambient air quality be monitored at-least at eight stations / locations around the proposed site. At- least one monitoring station in the upwind direction/downstream/non-impact non-polluting area as a control station;  The location of the air monitoring stations decided after taking into consideration the predominant wind direction, population zone and sensitive receptors including Reserve Forests;  Details of various facilities to be provided for the personnel involved in raw coal / washed coal / rejects/ash transportation & handling in terms of parking, rest areas, canteen, sanitation, and effluents / pollution load from these activities;  Details of infrastructure facilities such as sanitation, fuel, restroom, canteen etc. to be provided to the labour force including casual workers during construction as well as during operation phase. Effluents / pollution load from these activities be included;  Details of workshop, if any, and treatment of workshop effluents;  Occupational health issues, baseline data on the health of the population;

Environmental Impacts:  Impacts of project, if any, in the land use, in particular agricultural land, forest land, grazing land, water bodies, drainage of the area and the surroundings;  Impact of choice of the selected coal washing technology and boiler technology for power plant and impact on air quality and waste generation (emission and effluents). D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 23  Impacts of transportation covering the entire sequence of supply, transportation, handling, transfer and storage of raw coal, washed coal, rejects and ash on air quality showing in a flow chart with the specific points of fugitive emissions generation;  Impact of the project on local infrastructure of the area, such as road network. Examine whether existing roads are adequate to take care of additional load of washed coal / rejects transportation? Whether any additional infrastructure would need to be constructed and the agency responsible for the same with time frame?  Prediction of impact of project on different environmental components inter- alia (1) air including noise, (2) water (surface and groundwater), (3) soil, (4) flora and fauna and (5) socio-economic. Also take into account the emission from the vehicles and loading & unloading activities;

Mitigation Measures:  Use of rejects and middling from washery as fuel should be optimized in fuel mix, so as to use entire rejects and middling from washery;  Details of pollution control measures with respect to effluent treatment, air pollutants emission control, noise control and scientific & safe disposal of all solid wastes and ash;  Specific pollution control and mitigative measures for the entire process, Specific pollution control / mitigative measures proposed to be put in place at every transfer and handling points;  Coal stock yard (raw coal, washed coal, coal rejects and coal fines) be housed in closed sheds in pucca platform above ground level and ash in silo provided with wind shields / wind breaking walls; storage size and capacity of coal stock be decided in consultation with DGMS and Chhattisgarh Environment Conservation Board;  Measures for occupational health and safety of the personnel and manpower for the project;  Compliance to the standards (Fugitive emission standards, effluent discharge standards, noise level standards) prescribed for coal washery and power plant by Ministry of Environment and Forests, Government of India / Central Pollution Control Board / Chhattisgarh Environment Conservation Board (which ever stringent);  Compliance to the Code of Practice prescribed for coal washery by Ministry of Environment and Forests, Government of India / Central Pollution Control Board;  Ensure the particulate matter emission limited to 50 mg/Nm3;  Scheme for rainwater harvesting;  Details along-with action plan for development of greenbelt in 33% land area with not less than 1500 trees per ha giving details of species, width of plantation, planting schedule etc;  Details regarding sale/disposal of solid wastes / rejects / coal fine/ash from the unit to miscellaneous purchasers (if any). Explore the possibility for use of coal fines in briquettes making and use in power plant;  Action plan for use of ash as per provisions of notification on use of fly ash. No ash dyke for storage of ash;

Environmental Management Plan:  The EIA-EMP report covering the impacts and management plan for the project specific activities on the environment of the region, and the environmental quality – air, water, noise, land, biotic community through collection of data and information, generation of data on impacts for a rated capacity;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 24  Detailed EMP to mitigate the adverse impacts due to project along-with item-wise cost of its implementation (capital and recurring);  Disaster Management Plan and mitigative measures for disaster prevention and control;  Risk assessment to be undertaken, based on the same, propose safeguard measures;  Details along-with action plan and year wise funds to be allocated for eco- development/community welfare works including maintenance of roads in nearby villages/areas;

Additional Study:  Public Hearing details covering the notices issued in the newspaper, proceedings/minutes of public hearing, the points raised by the general public and commitments made, in a tabular form. If the Public Hearing is in the regional language, provide an authenticated English translation of the same;  Status of litigations/court cases filed/ pending against the project (all cased including environment) and / or any direction / order passed by any hon’ble court of law against the project, if so, details thereof;  Examine the aspects, whether the company be permitted as per regulations to sell rejects / coal fines to nearby power plants and / or to brick kiln manufactures;

The following general points should be noted:  All documents should be properly indexed, page numbered.  Period/date of data collection should be clearly indicated.  Authenticated English translation of all material provided in regional languages.  After the preparation of the draft (as per the generic structure prescribed in Appendix –III of the EIA Notification, 2006) covering the above mentioned TOR issues, the project proponent shall get the Public Hearing conducted and take further necessary action for obtaining environmental clearance in accordance with the procedure prescribed under the EIA Notification, 2006.  The copy of the letter received from SEAC, Chhattisgarh on the TOR prescribed for the project should be attached as an annexure to the final EIA-EMP report. The compliance statement of TOR prescribed should also be incorporated.

The final EIA-EMP report submitted to SEIAA, Chhattisgarh must incorporate the issues in TOR and that raised in Public Hearing. The index of the final EIA-EMP report must indicate the specific chapter and page no. of the EIA-EMP report where the specific TOR prescribed by SEAC, Chhattisgarh and the issue raised in the Public Hearing have been incorporated.

.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 25 Annexure-II

CONDITIONS OF ENVIRONMENTAL CLEARANCE FOR M/S BHILAI ENTERTAINMENT WORLD DEVELOPERS PRIVATE LIMITED SITE: OPPOSITE SURYA VIHAR, JUNWANI, BHILAI DISTT. DURG (CG) .

PART A – SPECIFIC CONDITIONS I. Construction Phase Facility of Labourers during Construction: - i) Construction camp and temporary labour sheds shall be located away from the construction site. Construction camps shall be provided for construction personnel to avoid indiscriminate settlement of construction workers and labourers. ii) Provision of drinking water, wastewater disposal, solid wastes management and primary health facilities shall be ensured for labour camps. Proper sanitation facilities shall be provided at the construction site to prevent health related problem. Domestic as well as sanitary wastes from construction camps shall be cleared regularly. Provision shall be made for mobile toilets. The safe disposal of wastewater and solid wastes generated during construction phase shall be ensured. iii) Water usage during construction shall be optimized to avoid any wastage. iv) Adequate safely measures shall be adopted to the construction workers. v) All the labourers to be engaged for construction works shall be screened for health and adequately treated before issue of work permits. The contractor shall ensure periodic health check-up of construction workers. A first Aid room shall be provided in the project both during construction and operation of the project. vi) Provision shall be made for the supply of kerosene or cooking gas /pressure cooker to the labourers during construction phase.

Environmental Management during Construction: - i) As far as practicable, re-use of debris of demolished existing buildings/houses/structures at existing site is recommended with a special care for handling and disposal of asbestos waste, if any. Rest of waste is to be disposed at the sanitary landfill disposal site. ii) The asbestos waste, from demolition debris, if any, shall separated and shall be disposed at Common Hazardous Wastes, Treatment and Disposal Facility. iii) Appropriate measure like adequate drainage, embankment consolidation and slope stabilization shall be taken along the roads to avoid soil erosion. Top soils (20 cm) of the borrow pit sites shall be conserved and restored after completion of excavation. All the topsoil excavated during construction activities shall be stored for use in horticulture/landscape development within the project site. Proper erosion control and sediment control measures shall be adopted. iv) Earth material generated from excavation shall be reuse to the maximum possible extent as filling material during site development. The construction debris and surplus excavated material shall be disposed off by mechanical transport in suitable pre-identified dumping areas to avoid land degradation and water logging due to indiscriminate dumping. Dumping areas shall be biologically reclaimed through topsoil cover and plantation. v) A soil erosion and sedimentation control plan shall be prepared prior to construction. The soil erosion, sediment control and storm water practices shall be incorporated depending upon the site characteristics to control soil erosion and loss of topsoil during construction.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 26 vi) Disposal of muck including excavated material during construction phase shall not create any adverse effects on the neighboring communities and disposed off taking the necessary precautions for general safety and health aspects. vii) Low sulphur diesel type diesel generator sets should be used during construction phase. Diesel generator sets during construction phase shall have acoustic enclosures and shall conform to Environment (Protection) Rules, 1986 prescribed for air and noise emission standards. viii) All Vehicles/equipments deployed during construction phase shall be ensure in good working condition and shall conform to applicable air and noise emission standards. These shall be operated only during non-peaking hours. ix) Ambient noise levels shall conform to residential standards both during day and night. Incremental pollution loads on the ambient air and noise quality shall be closely monitored during construction phase. Equivalent noise levels shall be ensured during construction phase and closely monitored during construction phase. Adequate measures shall be provided to maintain ambient air quality and noise levels during construction phase, so as to conform to the stipulated standards by CPCB/CECB. Fortnightly monitoring of ambient air quality (RPM, SPM, SO2 and NOx) shall be done. x) The protective equipments such as earplugs etc. shall be provided to construction personnel exposed to high noise levels. Stationary construction equipments generating noise shall be placed away from inhabited areas and silence zones. Construction activities carried out near residential area shall be scheduled to daytime only. Only limited necessary construction shall be done during nighttime. No unloading of construction materials shall be done at night. Vehicular noise and use of horns shall be controlled through enforcement of laws and public awareness. Use of pressure horns shall be strictly prohibited. To reduce noise level, the roads shall be designed to have more rows of plantation. xi) Construction spoils, including bituminous material and other hazardous materials including oil from construction equipments must not be allowed to contaminate watercourses and the dumpsites for such material must be secured so that they shall not leach into the ground water. If necessary, oil trap shall be installed where heavy machineries are deployed. xii) Proper and prior planning, sequencing and scheduling of all major construction activities shall be done. Construction material shall be stored in covered godowns / sheds. Truck carrying soil, sand and other construction materials shall be duly covered to prevent spillage and dust emission. Adequate dust suppression measures shall be undertaken to control fugitive dust emission. Regular water sprinkling for dust suppression shall be ensured. xiii) Use of Ready-Mix concrete is recommended for this project. Water demand during construction shall be reduced by use of pre-mix concrete, curing agents and other best practices. xiv) Accumulation/stagnation of water shall avoid ensuring vector control. xv) Regular supervision of the above and other measures shall be in place all through the construction phase so as to avoid disturbance to the surroundings.

Selection of Materials for Better Energy Efficiency: - i) Use of fly ash based bricks/blocks/tiles/products shall be explored to the maximum extent possible. Blended cement with fly ash shall be used (not less than 17%). The provisions of Ministry of Environment and Forests, Government of India Notification No. 763(E) dated 14/09/1999 [amended notification no. SO 979 (E) dated 27/08/2003] regarding use of Fly ash must be complied with. Appropriate usage of other industrial wastes shall also be explored. Soil borrow area should be filled up with ash with proper compaction and covered with topsoil kept separately. Fly ash/pond ash should be used for low- lying areas filling. In embankments / road construction etc. ash should be utilized as per guidelines of Ministry of Environment and Forests, Government of India/ Central Pollution Control Board/

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 27 Indian Road Congress etc. concerning authorities. The use of perforated brick / hollow blocks / fly ash based lightweight aerated concrete etc. should also be explored so as to reduce load on natural resources. ii) Construction shall conform to the requirements of local seismic regulations. The project proponent shall obtain permission for the plans and designs including structural design, standard, safety, adequacy of firefighting equipments, protection measures for lightning and specifications of all construction works from concerned authority. iii) Reduce the use of glazed surface as per National Building Code 2005. Use of glass in various buildings may be reduced up to 40% to reduce the electricity consumption and load on air-conditioning. If necessary, use of high quality double glass with special reflective coating in windows. Roof of the various buildings should meet prescriptive requirement as per Energy Conservation Building Code by using appropriate thermal insulation material to fulfil requirement. Opaque wall should meet prescriptive requirement as per Energy Conservation Building Code which is proposed to be mandatory for all air conditioned spaces while it is inspirational for non-air-conditioned spaces by use of appropriate thermal insulation material to fulfil requirement. iv) Use of energy efficient construction materials to achieve the desired thermal comfort shall be incorporated. The desired level of roof assembling ‘U’ factor and insulation ‘R’ value must be achieved. Roof assembling ‘U’ factor for the top roof shall not exceed 0.4 Watt/sq.m/degree centigrade with appropriate modifications of specifications and building technologies. The provisions of National Building Code 2005 shall be strictly followed. v) Modern electrical power transmission & distribution system shall be installed. vi) Street lighting shall be energy efficient. The High Pressure Sodium Vapour (HPSV) Lamps & Compact Fluorescent Lamps (CFL) along the building network system shall be provided. High intensity, high mast lights to be installed at intersections, parking areas, vehicles stops and major pedestrian movement areas as per the specifications and guidelines prescribed by the Bureau of Indian Standards. Solar energy may be used for outdoor lighting. vii) Extensive network of cellular phones and landlines shall be provided. The telephone and electric cables shall be laid in the same corridor. Adequate vertical and horizontal separation between telephone and electric cable shall be maintained. viii) Reduce hard paving-onsite (open area surrounding building premises) and/or provide shade on hard paved surfaces to minimize heat island effect and imperviousness of the site. ix) All proposed air-conditioned buildings should follow the norms proposed in the ECBC regulations framed by the Bureau of Energy Efficiency. Use of chillers shall be CFC & HCFC free.

Water Body Conservation: - i) Improvement or rehabilitation of existing natural streams, channels / nallas falling within premises (if any) shall be carried out without disturbing the ecological habitat. ii) No untreated/treated wastewater shall be discharge in the any water bodies under any circumstances. iii) All the construction and preparatory activities shall be carried out during dry seasons only.

Water Supply: - i) Total water requirement shall not exceed 360 cum/day (Fresh + Recycled). Water will be supplied through Municipal water supply and Bore wells. Surface water supply should also be explored to reduce load on ground water.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 28 ii) The water treatment plant shall be provided for treatment of water. Appropriate arrangement shall be made for treatment and reuse of backwash water of filtration plant. iii) Project proponent shall provide adequate measuring arrangement at the inlet point of water uptake and at the discharge point for the measurement of water utilized in different categories to monitor the daily water consumption. Measuring arrangement for effluent generated shall also be provided. iv) Water saving practices such as usage of water saving devices / fixtures, low flow flushing systems, sensor based fixtures, auto control walls, pressure reducing devices etc. should be adopted.

Greening Programme: - i) Lay out of proposed buildings and roads etc. shall be made in such a way that it shall cause minimum disturbance to existing flora and fauna. Appropriate green belt shall be developed to compensate the habitat loss of trees for site clearing. The project proponent must obtain permission for tree cutting from competent authority as per prevailing Act/Rules. Plantation along the side of the roads and in the open spaces shall be developed to act as sinks of air pollutants. Adequate plantation programme along the roads and open spaces shall be planned. The plantation of trees shall be completed in the construction stage. The plantation programme shall be drawn to confirm the natural climate conditions. The plantations shall consist of mixture of available indigenous, fast growing and sturdy species of trees, shrubs and herbs. Preferential plantation of flowering trees with less timber and fruit value shall be carried out. Plantation shall be done in at-least 33% area.

Sewage Management: - i) The quantity of effluent shall not exceed 203-cum/day. As per the proposal submitted, 225-cum/day capacity Sewage Treatment Plant comprise of Collection Sump, Primary Settling Tank, SAFE Reactor, Secondary Settling Tank, UV Treatment, Sludge Holing Tank, Filter Pres, Filtration Unit, Activated Carbon Filter, Treated Water Tank, Softner, Storage Tank shall be installed. Sewage collection system of adequate capacity to convey the sewage during peak hours shall be laid to collect and convey the sewage from various buildings. The augmentation of Sewage Collection System, Sewage- Pumping Station (if any) and Sewage Treatment Plant shall be ensured before the completion of the buildings.

Rain Water Harvesting Scheme: - i) Rainwater from open spaces shall be collected and reuse for landscaping and other purposes. Rooftop rainwater harvesting shall be adopted for the buildings. Every building shall have rainwater-harvesting facilities. The storm water flowing in roadside drains shall also be recycled and reused to maintain the vegetation and discharged into natural water bodies. Before recharging the surface runoff, pre treatment must be done to remove suspended matter and oil & grease. ii) Net imperviousness of the site should not exceed the imperviousness factor as prescribed by the National Building Code of India, Bureau of Indian Standards, 2005.

Transport Management: - i) Dedicated pedestrian paths shall be provided along the roads. Appropriate access shall be provided for physically challenged people in the pedestrian paths. ii) Traffic congestion near the entry and exit points from the roads adjoining the project site must be avoided. The design of service roads and the

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 29 entry and exit from the building shall conform to the norms & standards prescribed by the National Highways Authority of India / State Public Works Department. iii) Permeable (porous) paving in the parking areas, and walkways & patio areas should be used to control surface water runoff by allowing storm water to infiltrate the soil and return to ground water. iv) All utility lines (electricity, telephone, cable, water supply, sewage, drainage, etc.) shall be laid below ground level. Ducts shall be provided along and across the roads to lay the utility lines. Major trunk (water/sewerage) lines are to be laid along the utility corridor. v) The road drainage shall be designed to enable quick runoff of surface water and prevent water logging. The road level shall be kept at least 0.5 to 1.0 meter above the observed high flood level. The guidelines on Urban Drainage, IRC: SP-50 shall be followed. On the both sides of all roads, well –lit and smooth surfaced footpaths shall be provided. The hoardings shall be strictly prohibited along the roads. vi) Total area provided for parking shall be at least 21163 sqm (668 ECS). Adequate provision shall be made to cater the parking needs. Parking shall be fully internalized and no public space should be utilized. Parking spaces standards as given in ‘Manual on Norms and Standards for Environmental Clearance of Large Construction Projects’ issued by Ministry of Environment & Forests, Government of India shall be adapted. Others: - i) All mandatory approvals and permissions as required from Airport Authority, Director of explosives and Fire Department etc. shall be obtained. ii) Unskilled construction labourers shall be recruited from the local areas. Construction materials shall be procured locally as far as possible. iii) Provisions shall be made for the integration of solar water heating system. iv) Provision of 30ermin-composting for the biodegradable solid wastes generated from the Complex as well as the large amount of biomass that shall be available from the tree plantation shall be made. v) The ground water shall not be abstracted without prior permission from the competent authority in the Complex area. Permission to draw ground water shall be obtained from the competent authority prior to construction / operation of the project. vi) Adequate roadside drains shall be provided along the road to facilitate its better maintenance and increase in the life of the carriageway, which shall avoid soil erosion and land degradation due to water stagnation. The roadside drains shall be provided on both sides of the road. Longitudinal and cross drainage system shall be regularly maintained. Adequate new drainage works and cross drainage structures shall be provided for smooth passage of runoff. Filling of existing natural drainage courses shall be strictly avoided. Suitable drainage at construction site and camp shall be provided to eliminate the formation of stagnant water pools. vii) Regular supervision of the above and other measures for monitoring should be in place all through the construction phase, so as to avoid disturbance to the surroundings. viii) Under the provisions of Environment (Protection) Act, 1986, legal action shall be initiated as the construction of the project has been started without obtaining Environmental clearance. I. Operation Phase

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 30 Sewage Treatment Plant: - i) An independent expert shall certify the installation of the Sewage Treatment Plant (STP) and report in this regard shall be submitted to SEIAA, Chhattisgarh before the project is commissioned. Project proponent shall operate and maintain the sewage collection / conveyance system, sewage pumping system and sewage treatment system regularly to ensure the treated effluent quality within the standards prescribed by Ministry of Environment and Forests, Government of India or prescribed by Environment Conservation Board (which ever stringent). All the effluent treatment system shall be kept in good running conditions all the time and failure (if any), shall be immediately rectified without delay, otherwise, same alternate arrangement shall be made for storage of untreated sewage until the control measures are rectified to achieve the desired efficiency. Project proponent shall install separate electric metering arrangement with time totalizer for the running of pollution control systems. The record (logbook) of power & chemical consumption for running the pollution control systems shall be maintained. ii) Properly treated and disinfected (Ultra Violet) sewage shall be utilized in flushing the toilets, gardening purpose, make up water in air conditioning systems etc. No treated/untreated effluent shall be discharged out side the premises under any circumstances. Zero discharge condition shall be maintained all the time. Necessary measures shall be made to mitigate the odour problems from Sewage Treatment Plant (STP). Emission of Diesel Generator Set: - i) Noise barriers shall be provided at appropriate locations so as to ensure that the noise levels do not exceed the prescribed standards. DG sets shall be provided with necessary acoustic enclosures and stack height as per Central Pollution Control Board’s norms. Use of low sulphur diesel shall be ensured.

Ensure Energy Efficiency: - i) Power requirement shall be 5.8 MW through CSEB and power back up shall be 5 x 1500 KVA and 1 x 1250 KVA D.G. Sets. The project proponent shall resort to solar energy at least for water heating for buildings. Use of solar panels may be done to the extent possible. ii) The buildings shall have adequate distance among them to allow movement of fresh air and passage of natural light, air and ventilation. iii) During maintenance, energy efficient electric light fittings & lamps – low power ballasts, low consumption high power luminaries, lux level limiters & timers for street lighting shall be provided. Used CFLs and TFLs shall be properly collected and disposed off/sent for recycling as per the prevailing guidelines/rules of the regulatory authority to avoid mercury contamination. A report on the energy conservation measures confirming to energy conservation norms finalized by Bureau of Energy Efficiency should be prepared incorporating details about building materials & technology, ‘R’ value & ‘U’ factors etc.

Municipal Solid Waste/ Other Wastes: - i) The total quantity of solid wastes generated shall be 1000 kg/day. Two-chambered container (one for recyclable wastes and other for all organic and compostable wastes) shall be placed at appropriate distance on the roadside and inside the building. Covered dustbins / garbage collector in convenient places to collect the municipal solid wastes shall be provided. Modern trucks capable of using hydraulic lifting as well as safe covered garbage containers shall be provided for transportation. ii) The proponent must develop the Solid Wastes Segregation, Collection, Handling, Transportation and Disposal Scheme ensuring safe and scientific segregation, collection, handling, transportation and disposal of organic and inorganic portion. The organic waste is to be composted / 31ermin composted at the compost plant. D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 31 The domestic wastes generated shall be collected by private vendors and disposed off at the approved municipal waste sites. The sludge generated from Sewage Treatment Plant (after drying) shall be used as manure for gardening purpose. Wet garbage of kitchens and food outlets, restaurants collected from various outlets shall be kept in refrigerated cold rooms at restaurant floors, food court levels. Dry solid waste from shops etc. and recycling of all recyclable wastes such as newspaper, aluminum cans, glass bottles, iron scrap and plastics etc. shall be ensured. All municipal solid wastes shall be segregated, collected, transported, treated and disposed as per provisions of the Municipal Solid Wastes (Management and Handling) Rules, 2000 (As amended). iii) Public awareness programmes of benefit of living a clean and healthy life by proper management of solid wastes shall be organized regularly. iv) All hazardous wastes shall be segregated, collected, transported, treated and disposed as per provisions of the Hazardous Materials (Management Handling and Tran boundary Movement) Rules, 2008. v) The use of hand gloves, shoes and safety dress for all waste collectors and sorters shall be enforced. vi) Recycling of all recyclable wastes such as newspaper, aluminium cans, glass bottles, iron scrap and plastics etc. shall be encouraged through private participation. iii) Necessary measures shall be made to mitigate the odour problems from solid wastes processing plant. Others: - I) Noise shall be controlled to ensure that it does not exceed the prescribed standards. During nighttime the noise level measured at the boundary of the building shall be restricted to the permissible levels to comply with the prevalent regulations. II) Weep holes in the compound walls shall be provided to ensure natural drainage of rainwater in the catchments area during the monsoon period. III) The ground water level and its quality shall be monitored regularly in consultation with Central Ground Water Authority.

PART B – GENERAL CONDITIONS i) The environmental safeguards and mitigation measures contained in the application shall be implemented in letter and spirit. ii) All the conditions, liabilities and legal provisions contained in the Environmental Clearance shall be equally applicable to the successor management of the project in the event of the project proponent transferring the ownership, maintenance of management of the project to any other entity. iii) The project proponent shall make financial provision in the total budget of the project for implementation of the above-mentioned conditions and for suggested environmental safeguard measures. The funds earmarked for the environmental protection measures shall not be diverted for other purposes. iv) Six monthly monitoring reports shall be submitted to the SEIAA, Chhattisgarh; Regional Office, Ministry of Environment and Forests, Government of India, Bhopal and Chhattisgarh Environment Conservation Board, Raipur, who shall be monitoring the implementation of environmental safeguards shall be given full cooperation, facilities and documents / data by the project proponents during their inspection. A complete set of all the documents shall submit to State Level Environmental Impact Assessment Authority, Chhattisgarh. v) The responsibility of implementation of environmental safeguards rests fully on the project proponent. Project proponent shall establish an environmental

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 32 management cell to carryout functions relating to environmental management under the supervision of senior executive, directly reporting to the head of organization. vi) In the case of any change(s) in the scope of the project, the project shall require a fresh appraisal by the SEIAA. vii) The issuance of this letter does not convey any property rights in either real or personal property, or any exclusive privileges, nor does it authorize any injury to private property or any invasion of personal rights, nor any infringement of Central, State or Local laws or regulations. viii) All other statutory clearances from Chief Controller of Explosives, Fire Department, Civil Aviation Department, Forest Conservation Act, 1980 and Wildlife (Protection) Act, 1972 etc. shall be obtained, as applicable by project proponent. Project proponent shall obtain statutory clearances / licenses/ permissions from concerned Central Government/State Government Departments, Boards, Bodies and Corporations etc. Project proponent shall follow direction issued by Central Government/ State Government, Central Pollution Control Board/Chhattisgarh Environment Conservation Board from time to time regarding control of water & air pollution and for environmental conservation. ix) The State Level Environmental Impact Assessment Authority, Chhattisgarh reserves the right to amend the above conditions and add additional safeguard measures subsequently, if found necessary, and to take action including revoking of the environment clearance under the provisions of the Environmental (Protection) Act. 1986, to ensure effective implementation of the suggested safeguard measures in a time-bound and satisfactory manner.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 33 Annexure-III

TOR For M/S Essar Steel Limited, Bailadila Iron Ore Benefication Plant, Palnar Road, Kirandul District – Dantewada (CG) for 1x50 MW Captive Thermal Power Plant

Source of Raw Coal:  Linkage of coal/ assurance for supply of raw coal for power plant.  The mode of transport/conveyance of incoming coal and outgoing ash etc. Transportation routes showing villages, schools/colleges, residential areas etc. to be given.  The transportation through rail should be explored and proposal along with action plan to be submitted.

Project Description:  The proposed site for the power plant comprises of a Hillock. The project proponent has informed that they plan to remove the hillock for sitting the power plant. This displacement of the Hillock appears environmentally undesirable. Hence, Hillock should not be disturbed. If at all it should be disturbed partly, then detailed study of flora and fauna should be incorporated along with its conservation plan;  Optimization in the land requirement should be done;  A brief description of the plant, the technology used and energy conservation;  All the coordinates of the plant site with toposheet;  Detailed material balance and water balance, break up of fuel, break up of water requirement as per different activities;  Source of water supplied for use in power plant, sanction of the competent authority in the State Government;  Examine close circuit system for 100% recycling and reuse of the treated effluent or other uses such as irrigating the greenbelt within premises etc.;  Examine the air cooled technology for water conservation;  Examine zero effluent discharge conditions ;  Submission of sample test analysis of fuel used.

Description of the Environment:  Study of alternative sites should also be submitted so as to justify the selected site from environmental angle;  Study area should cover an area of 10 km radius around the proposed site;  A study area map of the core zone and 10 km area of the buffer showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines and other polluting sources, which shall also indicate the migratory corridors of fauna, if any, and the areas where endangered fauna and plants of medicinal and economic importance found in the area;  Contour map along with the site plan of the project and project land use area statement including land for project operations, such as coal handling plant, power plant, building infrastructure, effluent treatment plants, raw coal, coal fines, ash stock yard, colony, greenbelt, undisturbed area, natural topographical features (such as existing roads, drains/natural water bodies if any) to be left undisturbed, proposed diversion / re-channeling of natural drainage or water courses, if any;  One complete season site specific meteorological data;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 34  Information regarding surface hydrology, water regime, hydrogeology and ground water regime;  Information regarding drainage pattern of the study area;  Topography of study area, clearly indicating, whether the site requires any filling? If so, details of filling, filling material, quantity of filling material required, filling material supply source and transportation etc. The filling material should be fly/bottom/pond ash of thermal power plants/industrial solid wastes;  Location of any National Park, Wildlife Sanctuary, Reserve Forest, Protected Forest and Eco-sensitive zones, elephant/tiger reserve (existing as well as proposed), migratory routes, if any, within 10 km of the project site be specified and marked on the map duly authenticated by concerned Government department;  Map showing the core zone delineating the agricultural land (irrigated and un-irrigated), uncultivable land (as defined in revenue records), forest areas (as per records), grazing land and waste land;  Land use statement of the study area well as project area;  Collection of one complete season (non-monsoon preferably winter season 2008) primary base line data (along-with dates of monitoring) on environmental quality such as air (RPM, SPM, Sox & Nox), noise, water (surface and ground water), soil;  The monitoring be conducted as per Central Pollution Control Board’s guidelines and parameters for water testing for both ground water as per ISI and surface water as per Central Pollution Control Board guidelines;  Surface water, ground water, soil, noise and ambient air quality be monitored at-least at eight stations / locations around the proposed site. At- least one monitoring station in the upwind direction/downstream/non-impact non-polluting area as a control station;  The location of the air monitoring stations decided after taking into consideration the predominant wind direction, population zone and sensitive receptors including Reserve Forests;  Details of various facilities to be provided for the personnel involved in raw coal/ash transportation & handling in terms of parking, rest areas, canteen, sanitation, and effluents / pollution load from these activities;  Details of infrastructure facilities such as sanitation, fuel, restroom, canteen etc. to be provided to the labour force including casual workers during construction as well as during operation phase. Effluents / pollution load from these activities be included;  Details of workshop, if any, and treatment of workshop effluents;  Occupational health issues, baseline data on the health of the population;

Environmental Impacts:  Impacts of project, if any, in the land use, in particular agricultural land, forest land, grazing land, water bodies, drainage of the area and the surroundings;  Impact of choice of the selected boiler technology for power plant and impact on air quality and waste generation (emission and effluents).  Impacts of transportation covering the entire sequence of supply, transportation, handling, transfer and storage of raw coal and ash on air quality showing in a flow chart with the specific points of fugitive emissions generation;  Impact of the project on local infrastructure of the area, such as road network. Examine whether existing roads are adequate to take care of additional load of coal / ash transportation? Whether any additional

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 35 infrastructure would need to be constructed and the agency responsible for the same with time frame?  Prediction of impact of project on different environmental components inter- alia (1) air including noise, (2) water (surface and groundwater), (3) soil, (4) flora and fauna and (5) socio-economic. Also take into account the emission from the vehicles and loading & unloading activities;

Mitigation Measures:  Details of pollution control measures with respect to effluent treatment, air pollutants emission control, noise control and scientific & safe disposal of all solid wastes and ash;  Specific pollution control and mitigative measures for the entire process, Specific pollution control / mitigative measures proposed to be put in place at every transfer and handling points;  Coal stock yard (raw coal and coal fines) be housed in closed sheds in pucca platform above ground level and ash in silo provided with wind shields / wind breaking walls; storage size and capacity of coal stock be decided in consultation with DGMS and Chhattisgarh Environment Conservation Board;  Measures for occupational health and safety of the personnel and manpower for the project;  Compliance to the standards (Fugitive emission standards, effluent discharge standards, noise level standards) prescribed for power plant by Ministry of Environment and Forests, Government of India / Central Pollution Control Board / Chhattisgarh Environment Conservation Board (which ever stringent);  Ensure the particulate matter emission limited to 50 mg/Nm3;  Scheme for rainwater harvesting;  Details along-with action plan for development of greenbelt in 33% land area with not less than 1500 trees per ha giving details of species, width of plantation, planting schedule etc;  Details regarding sale/disposal of solid wastes / coal fine/ash from the unit to miscellaneous purchasers (if any). Explore the possibility for use of coal fines in briquettes making and use in power plant;  Action plan for use of ash as per provisions of notification on use of fly ash. No ash dyke for storage of ash;

Environmental Management Plan:  The EIA-EMP report covering the impacts and management plan for the project specific activities on the environment of the region, and the environmental quality – air, water, noise, land, biotic community through collection of data and information, generation of data on impacts for a rated capacity;  Detailed EMP to mitigate the adverse impacts due to project along-with item-wise cost of its implementation (capital and recurring);  Disaster Management Plan and mitigative measures for disaster prevention and control;  Risk assessment to be undertaken, based on the same, propose safeguard measures;  Details along-with action plan and year wise funds to be allocated for eco- development/community welfare works including maintenance of roads in nearby villages/areas;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 36 Additional Study:  Public Hearing details covering the notices issued in the newspaper, proceedings/minutes of public hearing, the points raised by the general public and commitments made, in a tabular form. If the Public Hearing is in the regional language, provide an authenticated English translation of the same;  Status of litigations/court cases filed/ pending against the project (all cased including environment) and / or any direction / order passed by any hon’ble court of law against the project, if so, details thereof;

The following general points should be noted:  All documents should be properly indexed, page numbered.  Period/date of data collection should be clearly indicated.  Authenticated English translation of all material provided in regional languages.  After the preparation of the draft (as per the generic structure prescribed in Appendix –III of the EIA Notification, 2006) covering the above mentioned TOR issues, the project proponent shall get the Public Hearing conducted and take further necessary action for obtaining environmental clearance in accordance with the procedure prescribed under the EIA Notification, 2006.  The copy of the letter received from SEAC, Chhattisgarh on the TOR prescribed for the project should be attached as an annexure to the final EIA-EMP report. The compliance statement of TOR prescribed should also be incorporated.

The final EIA-EMP report submitted to SEIAA, Chhattisgarh must incorporate the issues in TOR and that raised in Public Hearing. The index of the final EIA-EMP report must indicate the specific chapter and page no. of the EIA-EMP report where the specific TOR prescribed by SEAC, Chhattisgarh and the issue raised in the Public Hearing have been incorporated.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 37 Annexure-IV

CONDITIONS OF ENVIRONMENTAL CLEARANCE FOR

M/S GUPTA INFRASTRUCTURE (INDIA) PRIVATE LIMITED, KHASRA NO. 515, SCHEME NO. 32, PANDARI ROAD, DEVENDRA NAGAR, RAIPUR (C.G.)

PART A – SPECIFIC CONDITIONS II. Construction Phase

Facility of Labourers during Construction: - i) Construction camp and temporary labour sheds shall be located away from the construction site. Construction camps shall be provided for construction personnel to avoid indiscriminate settlement of construction workers and labourers. ii) Provision of drinking water, wastewater disposal, solid wastes management and primary health facilities shall be ensured for labour camps. Proper sanitation facilities shall be provided at the construction site to prevent health related problem. Domestic as well as sanitary wastes from construction camps shall be cleared regularly. Provision shall be made for mobile toilets. The safe disposal of wastewater and solid wastes generated during construction phase shall be ensured. iii) Water usage during construction shall be optimized to avoid any wastage. iv) Adequate safely measures shall be adopted to the construction workers. v) All the labourers to be engaged for construction works shall be screened for health and adequately treated before issue of work permits. The contractor shall ensure periodic health check-up of construction workers. A first Aid room shall be provided in the project both during construction and operation of the project. vi) Provision shall be made for the supply of kerosene or cooking gas /pressure cooker to the labourers during construction phase.

Environmental Management during Construction: - i) As far as practicable, re-use of debris of demolished existing buildings/houses/structures at existing site is recommended with a special care for handling and disposal of asbestos waste, if any. Rest of waste is to be disposed at the sanitary landfill disposal site. ii) The asbestos waste, from demolition debris, if any, shall separated and shall be disposed at Common Hazardous Wastes, Treatment and Disposal Facility. iii) Appropriate measure like adequate drainage, embankment consolidation and slope stabilization shall be taken along the roads to avoid soil erosion. Top soils (20 cm) of the borrow pit sites shall be conserved and restored after completion of excavation. All the topsoil excavated during construction activities shall be stored for use in horticulture/landscape development within the project site. Proper erosion control and sediment control measures shall be adopted. iv) Earth material generated from excavation shall be reuse to the maximum possible extent as filling material during site development. The construction debris and surplus excavated material shall be disposed off by mechanical transport in suitable pre-identified dumping areas to avoid land degradation and water logging due to indiscriminate dumping. Dumping areas shall be biologically reclaimed through topsoil cover and plantation.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 38 v) A soil erosion and sedimentation control plan shall be prepared prior to construction. The soil erosion, sediment control and storm water practices shall be incorporated depending upon the site characteristics to control soil erosion and loss of topsoil during construction. vi) Disposal of muck including excavated material during construction phase shall not create any adverse effects on the neighboring communities and disposed off taking the necessary precautions for general safety and health aspects. vii) Low sulphur diesel type diesel generator sets should be used during construction phase. Diesel generator sets during construction phase shall have acoustic enclosures and shall conform to Environment (Protection) Rules, 1986 prescribed for air and noise emission standards. viii) All Vehicles/equipments deployed during construction phase shall be ensure in good working condition and shall conform to applicable air and noise emission standards. These shall be operated only during non-peaking hours. ix) Ambient noise levels shall conform to residential standards both during day and night. Incremental pollution loads on the ambient air and noise quality shall be closely monitored during construction phase. Equivalent noise levels shall be ensured during construction phase and closely monitored during construction phase. Adequate measures shall be provided to maintain ambient air quality and noise levels during construction phase, so as to conform to the stipulated standards by CPCB/CECB. Fortnightly monitoring of ambient air quality (RPM, SPM, SO2 and Nox) shall be done. x) The protective equipments such as earplugs etc. shall be provided to construction personnel exposed to high noise levels. Stationary construction equipments generating noise shall be placed away from inhabited areas and silence zones. Construction activities carried out near residential area shall be scheduled to daytime only. Only limited necessary construction shall be done during nighttime. No unloading of construction materials shall be done at night. Vehicular noise and use of horns shall be controlled through enforcement of laws and public awareness. Use of pressure horns shall be strictly prohibited. To reduce noise level, the roads shall be designed to have more rows of plantation. xi) Construction spoils, including bituminous material and other hazardous materials including oil from construction equipments must not be allowed to contaminate watercourses and the dumpsites for such material must be secured so that they shall not leach into the ground water. If necessary, oil trap shall be installed where heavy machineries are deployed. xii) Proper and prior planning, sequencing and scheduling of all major construction activities shall be done. Construction material shall be stored in covered godowns / sheds. Truck carrying soil, sand and other construction materials shall be duly covered to prevent spillage and dust emission. Adequate dust suppression measures shall be undertaken to control fugitive dust emission. Regular water sprinkling for dust suppression shall be ensured. xiii) Use of Ready-Mix concrete is recommended for this project. Water demand during construction shall be reduced by use of pre-mix concrete, curing agents and other best practices. xiv) Accumulation/stagnation of water shall avoid ensuring vector control. xv) Regular supervision of the above and other measures shall be in place all through the construction phase so as to avoid disturbance to the surroundings.

Selection of Materials for Better Energy Efficiency: - i) Use of fly ash based bricks/blocks/tiles/products shall be explored to the maximum extent possible. Blended cement with fly ash shall be used (not less than 17%). The provisions of Ministry of Environment and Forests, Government of India Notification No. 763(E) dated 14/09/1999 [amended notification no. SO 979 (E) dated 27/08/2003] regarding use of Fly ash must be complied with. Appropriate usage of other industrial wastes shall also be explored. Soil borrow area should be

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 39 filled up with ash with proper compaction and covered with topsoil kept separately. Fly ash/pond ash should be used for low- lying areas filling. In embankments/road construction etc. ash should be utilized as per guidelines of Ministry of Environment and Forests, Government of India/ Central Pollution Control Board/ Indian Road Congress etc. concerning authorities. The use of perforated brick / hollow blocks / fly ash based lightweight aerated concrete etc. should also be explored so as to reduce load on natural resources. ii) Construction shall conform to the requirements of local seismic regulations. The project proponent shall obtain permission for the plans and designs including structural design, standard, safety, adequacy of firefighting equipments, protection measures for lightning and specifications of all construction works from concerned authority. iii) Reduce the use of glazed surface as per National Building Code 2005. Use of glass in various buildings may be reduced up to 40% to reduce the electricity consumption and load on air-conditioning. If necessary, use of high quality double glass with special reflective coating in windows. Roof of the various buildings should meet prescriptive requirement as per Energy Conservation Building Code by using appropriate thermal insulation material to fulfil requirement. Opaque wall should meet prescriptive requirement as per Energy Conservation Building Code which is proposed to be mandatory for all air conditioned spaces while it is inspirational for non-air-conditioned spaces by use of appropriate thermal insulation material to fulfil requirement. iv) Use of energy efficient construction materials to achieve the desired thermal comfort shall be incorporated. The desired level of roof assembling ‘U’ factor and insulation ‘R’ value must be achieved. Roof assembling ‘U’ factor for the top roof shall not exceed 0.4 Watt/sq.m/degree centigrade with appropriate modifications of specifications and building technologies. The provisions of National Building Code 2005 shall be strictly followed. v) Modern electrical power transmission & distribution system shall be installed. vi) Street lighting shall be energy efficient. The High Pressure Sodium Vapour (HPSV) Lamps & Compact Fluorescent Lamps (CFL) along the building network system shall be provided. High intensity, high mast lights to be installed at intersections, parking areas, vehicles stops and major pedestrian movement areas as per the specifications and guidelines prescribed by the Bureau of Indian Standards. Solar energy may be used for outdoor lighting. vii) Extensive network of cellular phones and landlines shall be provided. The telephone and electric cables shall be laid in the same corridor. Adequate vertical and horizontal separation between telephone and electric cable shall be maintained. viii) Reduce hard paving-onsite (open area surrounding building premises) and/or provide shade on hard paved surfaces to minimize heat island effect and imperviousness of the site. ix) All proposed air-conditioned buildings should follow the norms proposed in the ECBC regulations framed by the Bureau of Energy Efficiency. Use of chillers shall be CFC & HCFC free.

Water Body Conservation: - i) Improvement or rehabilitation of existing natural streams, channels / nallas falling within premises (if any) shall be carried out without disturbing the ecological habitat. ii) No untreated/treated wastewater shall be discharge in the any water bodies under any circumstances. iii) All the construction and preparatory activities shall be carried out during dry seasons only.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 40 Water Supply: - i) Total water requirement shall not exceed 700 cum/day (Fresh + Recycled). Total fresh water consumption shall not exceed 460 cum/day. Water will be supplied through Municipal water supply and Bore wells. During rainy season about 200 cum/day rooftop water collected in raw water sumps shall be used for domestic purpose. Surface water supply should also be explored to reduce load on ground water. ii) The water treatment plant shall be provided for treatment of water. Appropriate arrangement shall be made for treatment and reuse of backwash water of filtration plant. iii) Project proponent shall provide adequate measuring arrangement at the inlet point of water uptake and at the discharge point for the measurement of water utilized in different categories to monitor the daily water consumption. Measuring arrangement for effluent generated shall also be provided. iv) Water saving practices such as usage of water saving devices / fixtures, low flow flushing systems, sensor based fixtures, auto control walls, pressure reducing devices etc. should be adopted.

Greening Programme: - i) Lay out of proposed buildings and roads etc. shall be made in such a way that it shall cause minimum disturbance to existing flora and fauna. Appropriate green belt shall be developed to compensate the habitat loss of trees for site clearing. The project proponent must obtain permission for tree cutting from competent authority as per prevailing Act/Rules. Plantation along the side of the roads and in the open spaces shall be developed to act as sinks of air pollutants. Adequate plantation programme along the roads and open spaces shall be planned. The plantation of trees shall be completed in the construction stage. The plantation programme shall be drawn to confirm the natural climate conditions. The plantations shall consist of mixture of available indigenous, fast growing and sturdy species of trees, shrubs and herbs. Preferential plantation of flowering trees with less timber and fruit value shall be carried out. Plantation shall be done in at-least 33% area.

Sewage Management: - Waste water generation shall not be more than 232 cum/day. As per the proposal submitted, 250-cum/day capacity Sewage Treatment Plant based on the rotating media aerobic attached growth process i.e. the Rotating Bio disk Contactor system followed by secondary lamella settler shall be installed. Clear effluent should flow into a chlorine contact sump cum filter feed sump where chlorine should be dosed in the form of Sodium Hypo chlorite for dis-infection and trace organic destruction. Disinfected wastewater should be pumped through the tertiary treatment columns. The pressure sand filter which contains a specially designed bed of graded quartz sand should remove residual colloids while the activated carbon column remove the residual dissolved trace organic compounds thereby rendering the water almost free of organic contamination. The activated carbon will also remove excess chlorine residuals resulting from hypochlorite dosing. Sewage collection system of adequate capacity to convey the sewage during peak hours shall be laid to collect and convey the sewage from various buildings. The augmentation of Sewage Collection System, Sewage- Pumping Station (if any) and Sewage Treatment Plant shall be ensured before the completion of the buildings.

Rain Water Harvesting Scheme: - i) Rainwater from open spaces shall be collected and reuse for landscaping and other purposes. Rooftop rainwater harvesting shall be adopted for the buildings.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 41 Every building shall have rainwater-harvesting facilities. The storm water flowing in roadside drains shall also be recycled and reused to maintain the vegetation and discharged into natural water bodies. Before recharging the surface runoff, pre treatment must be done to remove suspended matter and oil & grease. ii) Net imperviousness of the site should not exceed the imperviousness factor as prescribed by the National Building Code of India, Bureau of Indian Standards, 2005. Transport Management: - i) Dedicated pedestrian paths shall be provided along the roads. Appropriate access shall be provided for physically challenged people in the pedestrian paths. ii) Traffic congestion near the entry and exit points from the roads adjoining the project site must be avoided. The design of service roads and the entry and exit from the building shall conform to the norms & standards prescribed by the National Highways Authority of India / State Public Works Department. iii) Permeable (porous) paving in the parking areas, and walkways & patio areas should be used to control surface water runoff by allowing storm water to infiltrate the soil and return to ground water. iv) All utility lines (electricity, telephone, cable, water supply, sewage, drainage, etc.) shall be laid below ground level. Ducts shall be provided along and across the roads to lay the utility lines. Major trunk (water/sewerage) lines are to be laid along the utility corridor. v) The road drainage shall be designed to enable quick runoff of surface water and prevent water logging. The road level shall be kept at least 0.5 to 1.0 meter above the observed high flood level. The guidelines on Urban Drainage, IRC: SP-50 shall be followed. On the both sides of all roads, well –lit and smooth surfaced footpaths shall be provided. The hoardings shall be strictly prohibited along the roads. vi) Total area provided for parking shall be at least for 789 Nos. cars. Adequate provision shall be made to cater the parking needs. Parking shall be fully internalized and no public space should be utilized. Parking spaces standards as given in ‘Manual on Norms and Standards for Environmental Clearance of Large Construction Projects’ issued by Ministry of Environment & Forests, Government of India shall be adapted. Others: - i) All mandatory approvals and permissions as required from Airport Authority, Director of explosives and Fire Department etc. shall be obtained. ii) Unskilled construction labourers shall be recruited from the local areas. Construction materials shall be procured locally as far as possible. iii) Provisions shall be made for the integration of solar water heating system. iv) Provision of vermi-composting for the biodegradable solid wastes generated from the Complex as well as the large amount of biomass that shall be available from the tree plantation shall be made. v) The ground water shall not be abstracted without prior permission from the competent authority in the Complex area. Permission to draw ground water shall be obtained from the competent authority prior to construction / operation of the project. vi) Adequate roadside drains shall be provided along the road to facilitate its better maintenance and increase in the life of the carriageway, which shall avoid soil erosion and land degradation due to water stagnation. The roadside drains shall be provided on both sides of the road. Longitudinal and cross drainage system shall be regularly maintained. Adequate new drainage

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 42 works and cross drainage structures shall be provided for smooth passage of runoff. Filling of existing natural drainage courses shall be strictly avoided. Suitable drainage at construction site and camp shall be provided to eliminate the formation of stagnant water pools. vii) Regular supervision of the above and other measures for monitoring should be in place all through the construction phase, so as to avoid disturbance to the surroundings. viii) Under the provisions of Environment (Protection) Act, 1986, legal action shall be initiated as the construction of the project has been started without obtaining Environmental clearance. II. Operation Phase Sewage Treatment Plant: - i) An independent expert shall certify the installation of the Sewage Treatment Plant (STP) and report in this regard shall be submitted to SEIAA, Chhattisgarh before the project is commissioned. Project proponent shall operate and maintain the sewage collection / conveyance system, sewage pumping system and sewage treatment system regularly to ensure the treated effluent quality within the standards prescribed by Ministry of Environment and Forests, Government of India or prescribed by Environment Conservation Board (which ever stringent). All the effluent treatment system shall be kept in good running conditions all the time and failure (if any), shall be immediately rectified without delay, otherwise, same alternate arrangement shall be made for storage of untreated sewage until the control measures are rectified to achieve the desired efficiency. Project proponent shall install separate electric metering arrangement with time totalizer for the running of pollution control systems. The record (logbook) of power & chemical consumption for running the pollution control systems shall be maintained. ii) Properly treated and disinfected (Ultra Violet) sewage shall be utilized in flushing the toilets, gardening purpose, make up water in air conditioning systems etc. No treated/untreated effluent shall be discharged out side the premises under any circumstances. Zero discharge condition shall be maintained all the time. Necessary measures shall be made to mitigate the odour problems from Sewage Treatment Plant (STP). Emission of Diesel Generator Set: - i) Noise barriers shall be provided at appropriate locations so as to ensure that the noise levels do not exceed the prescribed standards. DG sets shall be provided with necessary acoustic enclosures and stack height as per Central Pollution Control Board’s norms. Use of low sulphur diesel shall be ensured.

Ensure Energy Efficiency: - i) Power requirement shall be 08 MW through CSEB and power back up shall be 4 x 1500 KVA D.G. Sets. The project proponent shall resort to solar energy at least for water heating for buildings. Use of solar panels may be done to the extent possible. ii) The buildings shall have adequate distance among them to allow movement of fresh air and passage of natural light, air and ventilation. iii) During maintenance, energy efficient electric light fittings & lamps – low power ballasts, low consumption high power luminaries, lux level limiters & timers for street lighting shall be provided. Used CFLs and TFLs shall be properly collected and disposed off/sent for recycling as per the prevailing guidelines/rules of the regulatory authority to avoid mercury contamination. A report on the energy conservation measures confirming to energy conservation norms finalized by Bureau of Energy Efficiency should be prepared incorporating details about building materials & technology, ‘R’ value & ‘U’ factors etc. D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 43 Municipal Solid Waste/ Other Wastes: - i) The total quantity of solid wastes generated shall be 760 kg/day. Two-chambered container (one for recyclable wastes and other for all organic and compostable wastes) shall be placed at appropriate distance on the roadside and inside the building. Covered dustbins / garbage collector in convenient places to collect the municipal solid wastes shall be provided. Modern trucks capable of using hydraulic lifting as well as safe covered garbage containers shall be provided for transportation. ii) The proponent must develop the Solid Wastes Segregation, Collection, Handling, Transportation and Disposal Scheme ensuring safe and scientific segregation, collection, handling, transportation and disposal of organic and inorganic portion. The organic waste is to be composted / vermi composted at the compost plant. The domestic wastes generated shall be collected by private vendors and disposed off at the approved municipal waste sites. The sludge generated from Sewage Treatment Plant (after drying) shall be used as manure for gardening purpose. Wet garbage of kitchens and food outlets, restaurants collected from various outlets shall be kept in refrigerated cold rooms at restaurant floors, food court levels. Dry solid waste from shops etc. and recycling of all recyclable wastes such as newspaper, aluminum cans, glass bottles, iron scrap and plastics etc. shall be ensured. All municipal solid wastes shall be segregated, collected, transported, treated and disposed as per provisions of the Municipal Solid Wastes (Management and Handling) Rules, 2000 (As amended). iii) Public awareness programmes of benefit of living a clean and healthy life by proper management of solid wastes shall be organized regularly. iv) All hazardous wastes shall be segregated, collected, transported, treated and disposed as per provisions of the Hazardous Materials (Management Handling and Tran boundary Movement) Rules, 2008. v) The use of hand gloves, shoes and safety dress for all waste collectors and sorters shall be enforced. vi) Recycling of all recyclable wastes such as newspaper, aluminum cans, glass bottles, iron scrap and plastics etc. shall be encouraged through private participation. iii) Necessary measures shall be made to mitigate the odour problems from solid wastes processing plant. Others: - i) Noise shall be controlled to ensure that it does not exceed the prescribed standards. During nighttime the noise level measured at the boundary of the building shall be restricted to the permissible levels to comply with the prevalent regulations. ii) Weep holes in the compound walls shall be provided to ensure natural drainage of rainwater in the catchments area during the monsoon period. iii) The ground water level and its quality shall be monitored regularly in consultation with Central Ground Water Authority.

PART B – GENERAL CONDITIONS i) The environmental safeguards and mitigation measures contained in the application shall be implemented in letter and spirit. ii) All the conditions, liabilities and legal provisions contained in the Environmental Clearance shall be equally applicable to the successor management of the project in the event of the project proponent transferring the ownership, maintenance of management of the project to any other entity.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 44 iii) The project proponent shall make financial provision in the total budget of the project for implementation of the above-mentioned conditions and for suggested environmental safeguard measures. The funds earmarked for the environmental protection measures shall not be diverted for other purposes. iv) Six monthly monitoring reports shall be submitted to the SEIAA, Chhattisgarh; Regional Office, Ministry of Environment and Forests, Government of India, Bhopal and Chhattisgarh Environment Conservation Board, Raipur, who shall be monitoring the implementation of environmental safeguards shall be given full cooperation, facilities and documents / data by the project proponents during their inspection. A complete set of all the documents shall submit to State Level Environmental Impact Assessment Authority, Chhattisgarh. v) The responsibility of implementation of environmental safeguards rests fully on the project proponent. Project proponent shall establish an environmental management cell to carryout functions relating to environmental management under the supervision of senior executive, directly reporting to the head of organization. vi) In the case of any change(s) in the scope of the project, the project shall require a fresh appraisal by the SEIAA. vii) The issuance of this letter does not convey any property rights in either real or personal property, or any exclusive privileges, nor does it authorize any injury to private property or any invasion of personal rights, nor any infringement of Central, State or Local laws or regulations. viii) All other statutory clearances from Chief Controller of Explosives, Fire Department, Civil Aviation Department, Forest Conservation Act, 1980 and Wildlife (Protection) Act, 1972 etc. shall be obtained, as applicable by project proponent. Project proponent shall obtain statutory clearances / licenses/ permissions from concerned Central Government/State Government Departments, Boards, Bodies and Corporations etc. Project proponent shall follow direction issued by Central Government/ State Government, Central Pollution Control Board/Chhattisgarh Environment Conservation Board from time to time regarding control of water & air pollution and for environmental conservation. ix) The State Level Environmental Impact Assessment Authority, Chhattisgarh reserves the right to amend the above conditions and add additional safeguard measures subsequently, if found necessary, and to take action including revoking of the environment clearance under the provisions of the Environmental (Protection) Act. 1986, to ensure effective implementation of the suggested safeguard measures in a time-bound and satisfactory manner.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 45 Annexure – V

Prescribed Terms of Reference (TOR) for Preparing Draft EIA Report for M/s. Chhattisgarh Mineral Development Corporation Limited, Village – Kesra, Tehsil – Sitapur, District- Sarguja (Khasra No. 462, Lease Area 13.13 Ha.) 1. Project Description:  A brief description of the mine, the technology used and energy conservation;  The mode of transport of outgoing mined mineral,  All the coordinates of the mine lease area with toposheet;  Detailed mined out material balance and water balance; break up of top soil, overburden, mineral and all solid wastes; break up of water requirement as per different activities in the mining operations including dust suppression;  Source of water supplied for use in mining operations, dust suppression; sanction of the competent authority in the State Government;  Examine 100% recycling and reuse of the treated mine effluent, if any, in the mining operations or other uses such as irrigating the greenbelt within premises etc.;  Examine zero effluent discharge conditions; 2. Description of the Environment:  Study area should cover an area of 10 km radius around the proposed site;  A study area map of the core zone and 10 km area of the buffer showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines and other polluting sources, which shall also indicate the migratory corridors of fauna, if any, and the areas where endangered fauna and plants of medicinal and economic importance found in the area;  Contour map along with the site plan of the mine and mine lease land use area statement including land for various mining operations, such as quarry area, overburden dumps, material handling plant, safety zone, building infrastructure, effluent treatment plants, stock yard, labour quarter/colony (within/adjacent to the mine lease area), greenbelt, undisturbed area, natural topographical features (such as existing roads, drains/natural water bodies if any) to be left undisturbed, natural drainage adjoining the lease area and modification thereof in terms of construction of embankments/bunds, proposed diversion / re-channeling of natural drainage or water courses, if any;  Stage of acquisition of mine lease area; Revenue records/letter from District Revenue Office in regard to land records/usage;  One complete season site specific meteorological data;  Information regarding surface hydrology, water regime, hydrogeology and ground water regime;  Information regarding drainage pattern of the study area;  Location of any National Park, Wildlife Sanctuary, Reserve Forest, Protected Forest and Eco-sensitive zones, elephant/tiger reserve (existing as well as proposed), migratory routes, if any, within 10 km of the mine site

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 46 be specified and marked on the map duly authenticated by concerned Government department;  Map showing the core zone delineating the agricultural land (irrigated and un-irrigated), uncultivable land (as defined in revenue records), forest areas (as per records), grazing land and waste land;  Land use statement of the study area well as mine area;  Collection of one complete season (non-monsoon) primary base line data (along-with dates of monitoring) on environmental quality such as air (RPM, SPM, SOx & NOx), noise, water (surface and ground water), soil;  The monitoring be conducted as per Central Pollution Control Board’s guidelines and parameters for water testing for both ground water as per ISI and surface water as per Central Pollution Control Board guidelines;  Surface water, ground water, soil, noise and ambient air quality be monitored at-least at eight stations / locations around the proposed site. At- least one monitoring station in the upwind direction/downstream/non-impact non-polluting area as a control station;  Wind roses to determine air pollutant dispersion;  The location of the air monitoring stations decided after taking into consideration the predominant wind direction, population zone and sensitive receptors including Reserve Forests;  Details of various facilities to be provided for the personnel involved in mined out materials and all solid wastes production, transportation & handling in terms of parking, rest areas, canteen, sanitation, and effluents / pollution load from these activities;  Details of infrastructure facilities such as sanitation, fuel, restroom, canteen etc. to be provided to the labour force including casual workers during construction as well as during operation phase. Effluents / pollution load from these activities be included;  Details of workshop, if any, and treatment of workshop effluents;  Occupational health issues, baseline data on the health of the population;  Study on the existing flora and fauna in the study area carried out by an institution of relevant discipline and the list of flora and fauna duly authenticated separately for core and buffer zone, names of the species along with the classification under the Wild Life Protection Act and a statement clearly specifying whether the study area forms a part of the migratory corridor of any endangered fauna;  Details of mineral reserves, geological status of the study area and the seams to be worked, ultimate working depth and stage wise working plan/scheme until end of mine life on the basis of approved rated capacity and calendar plans of production from the approved Mining Plan/scheme; Include Geological maps also; 3. Environmental Impacts:  Impacts of project, if any, in the land use, in particular agricultural land, forest land, grazing land, water bodies, existing users of water bodies, drainage of the area and the surroundings;  Impact of choice of the selected mining technology and impact on air quality and waste generation (emission and effluents); Impact of choice of selected use of HEMM machinery; impact of blasting, noise and vibrations;  Impacts of mined out materials and all solid wastes transportation covering the entire sequence of production, transportation, handling, transfer and

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 47 storage on air quality showing in a flow chart with the specific points of fugitive emissions generation;  Impact of the project on local infrastructure of the area, such as rood network. Examine whether existing roads are adequate to take care of additional load of mined out materials and solid wastes transportation. Whether any additional infrastructure would need to be constructed and the agency responsible for the same with time frame?  Prediction of impact of project on different environmental components inter- alia (1) air including noise, (2) water (surface and groundwater regime), (3) soil, (4) flora and fauna and (5) socio-economic. Also take into account the emission from the vehicles and loading & unloading activities;  The details of input data, emission factor and model used for air quality modeling. The air quality contours may be plotted on location map showing the location of project site, habitation nearby, sensitive receptors, if any. The wind roses should be shown on this map;  Examine the number and efficiency of mobile/static water sprinkling system along the main haul roads, approach roads and also the frequency of their use in impacting the air quality; 4. Mitigation Measures:  Details of pollution control measures with respect to effluent treatment, air pollutants emission control, noise control, vibration control and scientific & safe disposal of all solid wastes etc.;  Specific pollution control and mitigative measures for the entire mining operations, Specific pollution control / mitigative measures proposed to be put in place at every air pollutants emission points, transfer and handling points;  All solid wastes temporary storage yard/ overburden dumps be provided with wind shields / wind breaking walls;  Measures for occupational health and safety of the personnel and manpower for the project;  Compliance to the standards (effluent discharge standards, noise level standards particulate matter emission standards) prescribed by Ministry of Environment and Forests, Government of India / Central Pollution Control Board / Chhattisgarh Environment Conservation Board (which ever stringent);  Ensure the particulate matter emission limited to 50 mg/Nm3;  Scheme for rainwater harvesting and ground water recharging with mined out water, if any;  Details of Progressive mine Closure Plan and Details along-with action plan for development of greenbelt with not less than 1500 trees per ha giving details of species, planting schedule etc; details of waste generation such as topsoil and overburden as per approved calendar programme in the approved Mining Plan/Scheme for the rated capacity and their management shown in maps as well as in explanatory chapter with tables giving progressive mine development and mine closure plan, greenbelt development, backfilling programme and conceptual post mining land use; overburden dumps heights and terracing based on slope stability studies with a maximum of 280 angle as the ultimate slope; show the sections of the dumps (ultimate) (both longitudinal and cross section) with relation to the adjacent area;  Topsoil management when new land is broken;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 48  Impacts of change in land use of agricultural land for mining operations and whether the land can be restored for agricultural use post mining; also examine if, at the end of mine life, the depth of void left as water reservoir can be gently sloped to reduce risk to end users; 5. Environmental Management Plan:  The EIA-EMP report covering the impacts and management plan of 20000 tonnes/annum rated capacity for the project specific activities on the environment of the region, and the environmental quality – air, water, noise, land, biotic community through collection of data and information, generation of data on impacts for a rated capacity;  Detailed EMP to mitigate the adverse impacts due to project along-with item-wise cost of its implementation (capital and recurring) until the end of mine life;  Integrating in the EMP, measures for minimizing use of natural resources such as water, land energy, raw materials/mineral etc.;  Disaster Management Plan and mitigative measures for disaster prevention and control;  Risk assessment to be undertaken, based on the same, propose safeguard measures;  Conceptual mine closure plan along with the fund requirement for the detailed activities proposed there under;  Details along-with action plan and year wise funds to be allocated for eco- development/community welfare works including maintenance of roads in nearby villages/areas; 6. Additional Study:  Public Hearing details covering the notices issued in the newspaper, proceedings/minutes of public hearing, the points raised by the general public and commitments made, in a tabular form. If the Public Hearing is in the regional language, provide an authenticated English translation of the same;  Status of litigations/court cases filed/ pending against the project (all cased including environment) and / or any direction / order passed by any hon’ble court of law against the project, if so, details thereof; The following general points should be noted:  All documents should be properly indexed, page numbered.  Period/date of data collection should be clearly indicated.  Authenticated English translation of all material provided in regional languages.  Compliance statement of the Terms of Reference issued by Ministry of Environment and frorests, Government of India, for 20000 tonnes/annum mineral production.  After the preparation of the Draft EIA Report for 20000 tonnes/annum rated capacity (as per the generic structure prescribed in Appendix –III of the EIA Notification, 2006) covering the above mentioned TOR issues, the project proponent shall get the Public Hearing conducted and take further necessary action for obtaining environmental clearance in accordance with the procedure prescribed under the EIA Notification, 2006.  The copy of the letter received from SEAC, Chhattisgarh on the TOR prescribed for the project should be attached as an annexure to the final EIA-EMP report. The compliance statement of TOR prescribed should also be incorporated.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 49  The final EIA-EMP report to be submitted to SEIAA, Chhattisgarh must incorporate the issues in TOR and that raised in Public Hearing. The index of the final EIA-EMP report must indicate the specific chapter and page no. of the EIA-EMP report where the specific TOR prescribed by SEAC, Chhattisgarh and the issue raised in the Public Hearing have been incorporated.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 50 Annexure – VI

Prescribed Terms of Reference (TOR) for Preparing Draft EIA Report for M/s. Chhattisgarh Mineral Development Corporation Limited, Village-Kesra, Tehsil – Sitapur, District- Sarguja (Khasra No.711, Lease Area 20.34 Ha.)

1. Project Description:  A brief description of the mine, the technology used and energy conservation;  The mode of transport of outgoing mined mineral,  All the coordinates of the mine lease area with toposheet;  Detailed mined out material balance and water balance; break up of top soil, overburden, mineral and all solid wastes; break up of water requirement as per different activities in the mining operations including dust suppression;  Source of water supplied for use in mining operations, dust suppression; sanction of the competent authority in the State Government;  Examine 100% recycling and reuse of the treated mine effluent, if any, in the mining operations or other uses such as irrigating the greenbelt within premises etc.;  Examine zero effluent discharge conditions; 2. Description of the Environment:  Study area should cover an area of 10 km radius around the proposed site;  A study area map of the core zone and 10 km area of the buffer showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines and other polluting sources, which shall also indicate the migratory corridors of fauna, if any, and the areas where endangered fauna and plants of medicinal and economic importance found in the area;  Contour map along with the site plan of the mine and mine lease land use area statement including land for various mining operations, such as quarry area, overburden dumps, material handling plant, safety zone, building infrastructure, effluent treatment plants, stock yard, labour quarter/colony (within/adjacent to the mine lease area), greenbelt, undisturbed area, natural topographical features (such as existing roads, drains/natural water bodies if any) to be left undisturbed, natural drainage adjoining the lease area and modification thereof in terms of construction of embankments/bunds, proposed diversion / re-channeling of natural drainage or water courses, if any;  Stage of acquisition of mine lease area; Revenue records/letter from District Revenue Office in regard to land records/usage;  One complete season site specific meteorological data;  Information regarding surface hydrology, water regime, hydrogeology and ground water regime;  Information regarding drainage pattern of the study area;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 51  Location of any National Park, Wildlife Sanctuary, Reserve Forest, Protected Forest and Eco-sensitive zones, elephant/tiger reserve (existing as well as proposed), migratory routes, if any, within 10 km of the mine site be specified and marked on the map duly authenticated by concerned Government department;  Map showing the core zone delineating the agricultural land (irrigated and un-irrigated), uncultivable land (as defined in revenue records), forest areas (as per records), grazing land and waste land;  Land use statement of the study area well as mine area;  Collection of one complete season (non-monsoon) primary base line data (along-with dates of monitoring) on environmental quality such as air (RPM, SPM, SOx & NOx), noise, water (surface and ground water), soil;  The monitoring be conducted as per Central Pollution Control Board’s guidelines and parameters for water testing for both ground water as per ISI and surface water as per Central Pollution Control Board guidelines;  Surface water, ground water, soil, noise and ambient air quality be monitored at-least at eight stations / locations around the proposed site. At- least one monitoring station in the upwind direction/downstream/non-impact non-polluting area as a control station;  Wind roses to determine air pollutant dispersion;  The location of the air monitoring stations decided after taking into consideration the predominant wind direction, population zone and sensitive receptors including Reserve Forests;  Details of various facilities to be provided for the personnel involved in mined out materials and all solid wastes production, transportation & handling in terms of parking, rest areas, canteen, sanitation, and effluents / pollution load from these activities;  Details of infrastructure facilities such as sanitation, fuel, restroom, canteen etc. to be provided to the labour force including casual workers during construction as well as during operation phase. Effluents / pollution load from these activities be included;  Details of workshop, if any, and treatment of workshop effluents;  Occupational health issues, baseline data on the health of the population;  Study on the existing flora and fauna in the study area carried out by an institution of relevant discipline and the list of flora and fauna duly authenticated separately for core and buffer zone, names of the species along with the classification under the Wild Life Protection Act and a statement clearly specifying whether the study area forms a part of the migratory corridor of any endangered fauna;  Details of mineral reserves, geological status of the study area and the seams to be worked, ultimate working depth and stage wise working plan/scheme until end of mine life on the basis of approved rated capacity and calendar plans of production from the approved Mining Plan/scheme; Include Geological maps also; 3. Environmental Impacts:  Impacts of project, if any, in the land use, in particular agricultural land, forest land, grazing land, water bodies, existing users of water bodies, drainage of the area and the surroundings;  Impact of choice of the selected mining technology and impact on air quality and waste generation (emission and effluents); Impact of choice of selected use of HEMM machinery; impact of blasting, noise and vibrations;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 52  Impacts of mined out materials and all solid wastes transportation covering the entire sequence of production, transportation, handling, transfer and storage on air quality showing in a flow chart with the specific points of fugitive emissions generation;  Impact of the project on local infrastructure of the area, such as rood network. Examine whether existing roads are adequate to take care of additional load of mined out materials and solid wastes transportation. Whether any additional infrastructure would need to be constructed and the agency responsible for the same with time frame?  Prediction of impact of project on different environmental components inter- alia (1) air including noise, (2) water (surface and groundwater regime), (3) soil, (4) flora and fauna and (5) socio-economic. Also take into account the emission from the vehicles and loading & unloading activities;  The details of input data, emission factor and model used for air quality modeling. The air quality contours may be plotted on location map showing the location of project site, habitation nearby, sensitive receptors, if any. The wind roses should be shown on this map;  Examine the number and efficiency of mobile/static water sprinkling system along the main haul roads, approach roads and also the frequency of their use in impacting the air quality; 4. Mitigation Measures:  Details of pollution control measures with respect to effluent treatment, air pollutants emission control, noise control, vibration control and scientific & safe disposal of all solid wastes etc.;  Specific pollution control and mitigative measures for the entire mining operations, Specific pollution control / mitigative measures proposed to be put in place at every air pollutants emission points, transfer and handling points;  All solid wastes temporary storage yard/ overburden dumps be provided with wind shields / wind breaking walls;  Measures for occupational health and safety of the personnel and manpower for the project;  Compliance to the standards (effluent discharge standards, noise level standards particulate matter emission standards) prescribed by Ministry of Environment and Forests, Government of India / Central Pollution Control Board / Chhattisgarh Environment Conservation Board (which ever stringent);  Ensure the particulate matter emission limited to 50 mg/Nm3;  Scheme for rainwater harvesting and ground water recharging with mined out water, if any;  Details of Progressive mine Closure Plan and Details along-with action plan for development of greenbelt with not less than 1500 trees per ha giving details of species, planting schedule etc; details of waste generation such as topsoil and overburden as per approved calendar programme in the approved Mining Plan/Scheme for the rated capacity and their management shown in maps as well as in explanatory chapter with tables giving progressive mine development and mine closure plan, greenbelt development, backfilling programme and conceptual post mining land use; overburden dumps heights and terracing based on slope stability studies with a maximum of 280 angle as the ultimate slope; show the sections of the dumps (ultimate) (both longitudinal and cross section) with relation to the adjacent area;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 53  Topsoil management when new land is broken;  Impacts of change in land use of agricultural land for mining operations and whether the land can be restored for agricultural use post mining; also examine if, at the end of mine life, the depth of void left as water reservoir can be gently sloped to reduce risk to end users; 5. Environmental Management Plan:  The EIA-EMP report covering the impacts and management plan of 20000 tonnes/annum rated capacity for the project specific activities on the environment of the region, and the environmental quality – air, water, noise, land, biotic community through collection of data and information, generation of data on impacts for a rated capacity;  Detailed EMP to mitigate the adverse impacts due to project along-with item-wise cost of its implementation (capital and recurring) until the end of mine life;  Integrating in the EMP, measures for minimizing use of natural resources such as water, land energy, raw materials/mineral etc.;  Disaster Management Plan and mitigative measures for disaster prevention and control;  Risk assessment to be undertaken, based on the same, propose safeguard measures;  Conceptual mine closure plan along with the fund requirement for the detailed activities proposed there under;  Details along-with action plan and year wise funds to be allocated for eco- development/community welfare works including maintenance of roads in nearby villages/areas; 6. Additional Study:  Public Hearing details covering the notices issued in the newspaper, proceedings/minutes of public hearing, the points raised by the general public and commitments made, in a tabular form. If the Public Hearing is in the regional language, provide an authenticated English translation of the same;  Status of litigations/court cases filed/ pending against the project (all cased including environment) and / or any direction / order passed by any hon’ble court of law against the project, if so, details thereof;

The following general points should be noted:  All documents should be properly indexed, page numbered.  Period/date of data collection should be clearly indicated.  Authenticated English translation of all material provided in regional languages.  Compliance statement of the Terms of Reference issued by Ministry of Environment and frorests, Government of India, for 20000 tonnes/annum mineral production.  After the preparation of the Draft EIA Report for 20000 tonnes/annum rated capacity (as per the generic structure prescribed in Appendix –III of the EIA Notification, 2006) covering the above mentioned TOR issues, the project proponent shall get the Public Hearing conducted and take further necessary action for obtaining environmental clearance in accordance with the procedure prescribed under the EIA Notification, 2006.

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 54  The copy of the letter received from SEAC, Chhattisgarh on the TOR prescribed for the project should be attached as an annexure to the final EIA-EMP report. The compliance statement of TOR prescribed should also be incorporated.  The final EIA-EMP report to be submitted to SEIAA, Chhattisgarh must incorporate the issues in TOR and that raised in Public Hearing. The index of the final EIA-EMP report must indicate the specific chapter and page no. of the EIA-EMP report where the specific TOR prescribed by SEAC, Chhattisgarh and the issue raised in the Public Hearing have been incorporated.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 55 Annexure – VII

Prescribed Terms of Reference (TOR) for Preparing Draft EIA Report for M/s. Chhattisgarh Mineral Development Corporation Limited, Village-Kesra, Tehsil – Sitapur, District- Sarguja (Khasra No.807, Lease Area 9.00 Ha)

1. Project Description:  A brief description of the mine, the technology used and energy conservation;  The mode of transport of outgoing mined mineral,  All the coordinates of the mine lease area with toposheet;  Detailed mined out material balance and water balance; break up of top soil, overburden, mineral and all solid wastes; break up of water requirement as per different activities in the mining operations including dust suppression;  Source of water supplied for use in mining operations, dust suppression; sanction of the competent authority in the State Government;  Examine 100% recycling and reuse of the treated mine effluent, if any, in the mining operations or other uses such as irrigating the greenbelt within premises etc.;  Examine zero effluent discharge conditions; 2. Description of the Environment:  Study area should cover an area of 10 km radius around the proposed site;  A study area map of the core zone and 10 km area of the buffer showing major topographical features such as land use, drainage, location of habitats, major construction including railways, highways, pipelines, major industries / mines and other polluting sources, which shall also indicate the migratory corridors of fauna, if any, and the areas where endangered fauna and plants of medicinal and economic importance found in the area;  Contour map along with the site plan of the mine and mine lease land use area statement including land for various mining operations, such as quarry area, overburden dumps, material handling plant, safety zone, building infrastructure, effluent treatment plants, stock yard, labour quarter/colony (within/adjacent to the mine lease area), greenbelt, undisturbed area, natural topographical features (such as existing roads, drains/natural water bodies if any) to be left undisturbed, natural drainage adjoining the lease area and modification thereof in terms of construction of embankments/bunds, proposed diversion / re-channeling of natural drainage or water courses, if any;  Stage of acquisition of mine lease area; Revenue records/letter from District Revenue Office in regard to land records/usage;  One complete season site specific meteorological data;  Information regarding surface hydrology, water regime, hydrogeology and ground water regime;  Information regarding drainage pattern of the study area;  Location of any National Park, Wildlife Sanctuary, Reserve Forest, Protected Forest and Eco-sensitive zones, elephant/tiger reserve (existing

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 56 as well as proposed), migratory routes, if any, within 10 km of the mine site be specified and marked on the map duly authenticated by concerned Government department;  Map showing the core zone delineating the agricultural land (irrigated and un-irrigated), uncultivable land (as defined in revenue records), forest areas (as per records), grazing land and waste land;  Land use statement of the study area well as mine area;  Collection of one complete season (non-monsoon) primary base line data (along-with dates of monitoring) on environmental quality such as air (RPM, SPM, SOx & NOx), noise, water (surface and ground water), soil;  The monitoring be conducted as per Central Pollution Control Board’s guidelines and parameters for water testing for both ground water as per ISI and surface water as per Central Pollution Control Board guidelines;  Surface water, ground water, soil, noise and ambient air quality be monitored at-least at eight stations / locations around the proposed site. At- least one monitoring station in the upwind direction/downstream/non-impact non-polluting area as a control station;  Wind roses to determine air pollutant dispersion;  The location of the air monitoring stations decided after taking into consideration the predominant wind direction, population zone and sensitive receptors including Reserve Forests;  Details of various facilities to be provided for the personnel involved in mined out materials and all solid wastes production, transportation & handling in terms of parking, rest areas, canteen, sanitation, and effluents / pollution load from these activities;  Details of infrastructure facilities such as sanitation, fuel, restroom, canteen etc. to be provided to the labour force including casual workers during construction as well as during operation phase. Effluents / pollution load from these activities be included;  Details of workshop, if any, and treatment of workshop effluents;  Occupational health issues, baseline data on the health of the population;  Study on the existing flora and fauna in the study area carried out by an institution of relevant discipline and the list of flora and fauna duly authenticated separately for core and buffer zone, names of the species along with the classification under the Wild Life Protection Act and a statement clearly specifying whether the study area forms a part of the migratory corridor of any endangered fauna;  Details of mineral reserves, geological status of the study area and the seams to be worked, ultimate working depth and stage wise working plan/scheme until end of mine life on the basis of approved rated capacity and calendar plans of production from the approved Mining Plan/scheme; Include Geological maps also; 3. Environmental Impacts:  Impacts of project, if any, in the land use, in particular agricultural land, forest land, grazing land, water bodies, existing users of water bodies, drainage of the area and the surroundings;  Impact of choice of the selected mining technology and impact on air quality and waste generation (emission and effluents); Impact of choice of selected use of HEMM machinery; impact of blasting, noise and vibrations;  Impacts of mined out materials and all solid wastes transportation covering the entire sequence of production, transportation, handling, transfer and

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 57 storage on air quality showing in a flow chart with the specific points of fugitive emissions generation;  Impact of the project on local infrastructure of the area, such as rood network. Examine whether existing roads are adequate to take care of additional load of mined out materials and solid wastes transportation. Whether any additional infrastructure would need to be constructed and the agency responsible for the same with time frame?  Prediction of impact of project on different environmental components inter- alia (1) air including noise, (2) water (surface and groundwater regime), (3) soil, (4) flora and fauna and (5) socio-economic. Also take into account the emission from the vehicles and loading & unloading activities;  The details of input data, emission factor and model used for air quality modeling. The air quality contours may be plotted on location map showing the location of project site, habitation nearby, sensitive receptors, if any. The wind roses should be shown on this map;  Examine the number and efficiency of mobile/static water sprinkling system along the main haul roads, approach roads and also the frequency of their use in impacting the air quality; 4. Mitigation Measures:  Details of pollution control measures with respect to effluent treatment, air pollutants emission control, noise control, vibration control and scientific & safe disposal of all solid wastes etc.;  Specific pollution control and mitigative measures for the entire mining operations, Specific pollution control / mitigative measures proposed to be put in place at every air pollutants emission points, transfer and handling points;  All solid wastes temporary storage yard/ overburden dumps be provided with wind shields / wind breaking walls;  Measures for occupational health and safety of the personnel and manpower for the project;  Compliance to the standards (effluent discharge standards, noise level standards particulate matter emission standards) prescribed by Ministry of Environment and Forests, Government of India / Central Pollution Control Board / Chhattisgarh Environment Conservation Board (which ever stringent);  Ensure the particulate matter emission limited to 50 mg/Nm3;  Scheme for rainwater harvesting and ground water recharging with mined out water, if any;  Details of Progressive mine Closure Plan and Details along-with action plan for development of greenbelt with not less than 1500 trees per ha giving details of species, planting schedule etc; details of waste generation such as topsoil and overburden as per approved calendar programme in the approved Mining Plan/Scheme for the rated capacity and their management shown in maps as well as in explanatory chapter with tables giving progressive mine development and mine closure plan, greenbelt development, backfilling programme and conceptual post mining land use; overburden dumps heights and terracing based on slope stability studies with a maximum of 280 angle as the ultimate slope; show the sections of the dumps (ultimate) (both longitudinal and cross section) with relation to the adjacent area;  Topsoil management when new land is broken;

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 58  Impacts of change in land use of agricultural land for mining operations and whether the land can be restored for agricultural use post mining; also examine if, at the end of mine life, the depth of void left as water reservoir can be gently sloped to reduce risk to end users; 5. Environmental Management Plan:  The EIA-EMP report covering the impacts and management plan of 30000 tonnes/annum rated capacity for the project specific activities on the environment of the region, and the environmental quality – air, water, noise, land, biotic community through collection of data and information, generation of data on impacts for a rated capacity;  Detailed EMP to mitigate the adverse impacts due to project along-with item-wise cost of its implementation (capital and recurring) until the end of mine life;  Integrating in the EMP, measures for minimizing use of natural resources such as water, land energy, raw materials/mineral etc.;  Disaster Management Plan and mitigative measures for disaster prevention and control;  Risk assessment to be undertaken, based on the same, propose safeguard measures;  Conceptual mine closure plan along with the fund requirement for the detailed activities proposed there under;  Details along-with action plan and year wise funds to be allocated for eco- development/community welfare works including maintenance of roads in nearby villages/areas; 6. Additional Study:  Public Hearing details covering the notices issued in the newspaper, proceedings/minutes of public hearing, the points raised by the general public and commitments made, in a tabular form. If the Public Hearing is in the regional language, provide an authenticated English translation of the same;  Status of litigations/court cases filed/ pending against the project (all cased including environment) and / or any direction / order passed by any hon’ble court of law against the project, if so, details thereof;

The following general points should be noted:  All documents should be properly indexed, page numbered.  Period/date of data collection should be clearly indicated.  Authenticated English translation of all material provided in regional languages.  Compliance statement of the Terms of Reference issued by Ministry of Environment and frorests, Government of India, for 30000 tonnes/annum mineral production.  After the preparation of the Draft EIA Report for 30000 tonnes/annum rated capacity (as per the generic structure prescribed in Appendix –III of the EIA Notification, 2006) covering the above mentioned TOR issues, the project proponent shall get the Public Hearing conducted and take further necessary action for obtaining environmental clearance in accordance with the procedure prescribed under the EIA Notification, 2006.  The copy of the letter received from SEAC, Chhattisgarh on the TOR prescribed for the project should be attached as an annexure to the final

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 59 EIA-EMP report. The compliance statement of TOR prescribed should also be incorporated.  The final EIA-EMP report to be submitted to SEIAA, Chhattisgarh must incorporate the issues in TOR and that raised in Public Hearing. The index of the final EIA-EMP report must indicate the specific chapter and page no. of the EIA-EMP report where the specific TOR prescribed by SEAC, Chhattisgarh and the issue raised in the Public Hearing have been incorporated.

Secretary, SEAC Chairman, SEAC

D:\Docs\2018-04-07\083f1327b0d939b97da089bb02a0ce73.doc 60

Recommended publications