SECTION 09300

TILE

Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2007 - 2013 ARCAT, Inc. - All rights reserved

PART 1 PRODUCTS

1.1 SECTION INCLUDES

A. Tile and Accessories: 1. ColorBody Porcelain Tile. 2. Glazed Porcelain. 3. Quarry Tile. 4. Floor and Wall Tile. 5. Wall Tile. 6. Glass and Metal Tile. 7. Mosaic Tile. 8. Natural Stone Tile. 9. Tile Setting Materials.

1.2 RELATED SECTIONS

A. Section 03505 - Self-Leveling Underlayment.

B. Section 07920 - Joint Sealants.

1.3 REFERENCES

A. American National Standards Institute (ANSI): 1. ANSI A108/A118/A136.1 - Specifications for the Installation of Ceramic Tile. 2. ANSI A137.1 - Specifications for Ceramic Tile.

B. American International (ASTM): 1. ASTM C 144 - Standard Specification for Aggregate for Masonry Mortar. 2. ASTM C 150 - Standard Specification for Portland Cement. 3. ASTM C 207 - Standard Specification for Hydrated Lime for Masonry Purposes. 4. ASTM C 503 - Specification for Marble Building Stone (Exterior). 5. ASTM C 615 - Specification for Granite Dimension Stone. 6. ASTM C 629 - Specification for Slate Dimension Stone. 7. ASTM C 847 - Standard Specification for Metal Lath. 8. ASTM C 1028 - Standard Test Method for Determining the Static Coefficient of Friction or Ceramic Tile and Other Like Surfaces by the Horizontal

09300-1 Dynamometer Pull-Meter Method. 9. ASTM D 4397 - Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications.

C. Tile Council of North America (TCNA): TCA Handbook for Ceramic Tile Installation, 2007.

1.4 PERFORMANCE REQUIREMENTS

A. Static Coefficient of Friction: Tile on walkway surfaces shall meet or exceed the following values as determined by testing in conformance with ASTM C 1028. 1. Level Surfaces: Minimum of 0.6 (Wet). 2. Step Treads: Minimum of 0.6 (Wet). 3. Ramp Surfaces: Minimum of 0.8 (Wet).

1.5 SUBMITTALS

A. Submit under provisions of Section 01300. Obtain approvals of submittals prior to delivering products to the jobsite.

B. Product Data: Manufacturer's data sheets on each product to be used, including: 1. Preparation instructions and recommendations. 2. Storage and handling requirements and recommendations. 3. Installation methods.

C. Shop Drawings: Indicate tile layout, patterns, color arrangement, perimeter conditions, junctions with dissimilar materials, control and expansion joints, thresholds, ceramic accessories, and setting details.

D. Selection Samples: Color charts illustrating full range of colors and patterns.

E. Selection Samples: Full-size samples of actual tiles for selection.

F. Verification Samples: For tile 8 by 8 inches (203 by 203 mm) and smaller, mount actual units on minimum 12 by 12 inch (305 by 305 mm) plywood panels and grout with selected grout. For larger tile, submit two units of each type, and grout chart indicating selections.

G. Manufacturer's Certificate: When applicable, submit a Master Grade Certificate signed by the manufacturer and the installer certifying that products meet or exceed the specified requirements of ANSI A137.1.

H. Maintenance Data: Include recommended cleaning methods, cleaning materials, and maintenance coatings.

1.6 QUALITY ASSURANCE

A. Installer Qualifications: Company specializing in performing the work of this section with minimum two years experience.

B. Single Source Responsibility: Obtain each type and color of tile from a single source. Obtain each type and color of mortar, adhesive and grout from the same source.

C. General: Provide tile that complies with ANSI A137.1 where applicable for types, compositions and other characteristics indicated. Provide tile in the locations and of the types colors and pattern indicated on the Drawings. 1. Factory Blending: For tile exhibiting color variations within the ranges selected under Submittal of samples, blend tile in the factory and package so tile taken

09300-2 from one package shows the same range of colors as those taken from other packages. 2. Mounting: For factory mounted tile, provide back or edge mounted tile assemblies as standard with the manufacturer, unless otherwise specified. 3. Factory Applied Temporary Protective Coatings: Where indicated under tile type, protect exposed surfaces of tile against adherence of mortar and grout by precoating with a continuous film of petroleum paraffin wax applied hot. Do not coat unexposed tile surfaces.

1.7 DELIVERY, STORAGE, AND HANDLING

A. Deliver and store products in manufacturer's unopened packaging until ready for installation.

B. Protect setting materials from freezing or overheating in accordance with manufacturer's instructions.

C. Store tile and setting materials on elevated platforms, under cover and in a dry location and protect from contamination, dampness, freezing or overheating.

1.8 ENVIRONMENTAL REQUIREMENTS

A. Do not install adhesives in an unventilated environment.

B. Maintain ambient and substrate temperature of 50 degrees F (10 degrees C) during tiling and for a minimum of 7 days after completion.

1.9 EXTRA MATERlALS

A. Provide for Owner's use a minimum of 2 percent of the primary sizes and colors of tile specified, boxed and clearly labeled.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: American Olean Tile Co., which is located at: 7834 C. F. Hawn Fwy. P. O. Box 17130 ; Dallas, TX 75217; Toll Free Tel: 888-AOT TILE; Tel: 214-398-1411; Fax: 215-822-1353; Email: request info ([email protected]); Web: www.americanolean.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2 TILE

A. ColorBody Porcelain Tile: 1. Series: Avenue One. a. Floor Field Tile Size: 1/2 by 6 inches. b. Floor Field Tile Size: 12 by 12 inches. c. Floor Field Tile Size: 12 by 24 inches. d. Floor Field Tile Size: 12 by 24 inches. e. Floor Field Tile Size: 18 by 18 inches. f. Floor Field Tile Size: 2 by 12 inches. g. Floor Field Tile Size: 24 by 24 inches. h. Moisture Absorption: Less than 0.5 percent.

09300-3 i. Surface Finishes: Flamed, Honed, Plain, Polished, Textured. j. Trim Name: Bullnose, Cove Base, Cover Base Corner. 2. Series: Hennessey Place. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 2 by 2 inches. d. Floor Field Tile Size: 24 by 24 inches. e. Floor Field Tile Size: 5 by 7 inches. f. Floor Field Tile Size: 5 by 15 inches. g. Moisture Absorption: Less than 0.5 percent. h. Surface Finishes: Polished, Rustic, Plain, Honed, Textured. i. Trim Name: Bullnose. 3. Series: Highland Ridge. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 1 by 3 inches. c. Floor Field Tile Size: 18 by 18 inches. d. Floor Field Tile Size: 2 by 12 inches. e. Floor Field Tile Size: 4 by 12 inches. f. Floor Field Tile Size: 6 by 6 inches. g. Moisture Absorption: Less than 0.5 percent. h. Surface Finishes: Polished, Rustic, Plain, Honed, Textured. i. Trim Name: Bullnose, Cove Base, Cove Base Outcorner. 4. Series: Infusion. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Floor Field Tile Size: 6 by 24 inches. e. Floor Field Tile Size: 4 by 24 inches. f. Floor Field Tile Size: 8 by 20 inches. g. Floor Field Tile Size: 1 by 2 inches. h. Moisture Absorption: Less than 0.5 percent for floor tile, less than 20 percent for wall tile. i. Trim Name: Fabric Bullnose, Cove Base, Cove Base Outcorner, jolly. 5. Series: Shadow Bay. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 3 by 3 inches. d. Floor Field Tile Size: 24 by 24 inches. e. Surface Finishes: Polished, Plain, Unpolished. f. Trim Name: Bullnose, Cove Base, Cove Base Outcorner. 6. Series: St. Germain. a. Floor Field Tile Size: 1 by 2 inches. b. Floor Field Tile Size: 12 by 12 inches. c. Floor Field Tile Size: 12 by 24 inches. d. Floor Field Tile Size: 24 by 24 inches. e. Floor Field Tile Size: 6 by 24 inches. f. Moisture Absorption: Less than 0.5 percent. g. Surface Finishes: Textured, Flamed, Honed, Plain, Polished, Rustic. h. Trim Name: Bullnose, Cove Base, Cove Base Outcorner. 7. Series: Relevance. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 24 by 48 inches. c. Floor Field Tile Size: 12 by 24 inches. d. Moisture Absorption: Less than 0.5 percent. e. Surface Finishes: Textured, Unpolished. f. Trim Name: Bullnose, Cove Base, Cove Base Outcorner.

09300-4 8. Series: Scene. a. Floor Field Tile Size: 6 by 48 inches. b. Floor Field Tile Size: 8 by 48 inches. c. Floor Field Tile Size: 12 by 48 inches. d. Floor Field Tile Size: 12 by 24 inches. e. Floor Field Tile Size: 24 by 24 inches f. Moisture Absorption: Less than 0.5 percent. g. Surface Finishes: Light Polished, Unpolished. h. Trim Name: Bullnose, Cove Base, Cove Base Outcorner. 9. Series: Studio District. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Floor Field Tile Size: 6 by 6 inches. e. Floor Field Tile Size: 3 by 3 inches (12 by 12 inches sheet). f. Floor Field Tile Size: 10 by 24 inches. g. Floor Field Tile Size: 3 by 12 inches. h. Moisture Absorption: Less than 0.5 percent for floor tile, less than 20 percent for wall tile. i. Trim Name: Bullnose, Cove Base, Cove Base Outcorner, Jolly. 10. Series: Terreno. a. Floor Field Tile Size: 6 by 24 inches. b. Surface Finishes: Textured. c. Trim Name: Bullnose.

B. Glazed Porcelain: 1. Series: Amber Valley. a. Floor Field Tile Size: 13 by 13 inches. b. Floor Field Tile Size: 20 by 20 inches. c. Floor Field Tile Size: 3 by 3 inches. d. Floor Field Tile Size: 6 1/2 by 6 1/2 inches. e. Moisture Absorption: Less than 0.5 percent. f. Surface Finishes: Plain and Unpolished. g. Trim Name: Bullnose, Cove Base, Cove Base Outcorner. 2. Series: Arbor House. a. Floor Field Tile Size: 6 by 24 inches. b. Moisture Absorption: Less than 0.5 percent. c. Trim Name: Bullnose. 3. Series: Belmar. a. Floor Field Tile Size: 18 by 18 inches. b. Floor Field Tile Size: 12 by 12 inches. c. Floor Field Tile Size: 9 by 12 inches. d. Floor Field Tile Size: 6 by 6 inches. e. Floor Field Tile Size: 3 by 6 inches. f. Floor Field Tile Size: 4 by 12 inches. g. Floor Field Tile Size: 3 by 12 inches. h. Floor Field Tile Size: 2 by 2 inches. 4. Series: Bevalo. a. Floor Field Tile Size: 3 by 3 inches (76 mm by 76 mm). 12/24 sheet - dot mounted. b. Moisture Absorption: Less than 3 percent for field tile and mosaic tile, less than 20 percent for wall tile. c. Surface Finishes: Plain. d. Trim Name: Floor Bullnose, Wall Bullnose, Wall Bullnose Corner, Mosaic Bullnose Corner, Cove Base and Cove Base Outcorner. e. Color: Dove.

09300-5 f. Color: Mist. g. Color: Charcoal. h. Color: Earth. i. Trim Name: Bullnose, Surface Bullnose, Surface Bullnose Outcorner, Radius Bullnose, Radius Bullnose Outcorner, Mosaic Bullnose, Corner Rail, Corner Rail Outcorner, Quarter Round, Quarter Round Corner. 5. Series: Cascata. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Moisture Absorption: Less than 0.5 percent. e. Trim Name: Bullnose. 6. Series: Kendal Slate. a. Floor Field Tile Size: 18 by 18 inches. b. Floor Field Tile Size: 12 by 18 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Floor Field Tile Size: 6 by 6 inches. e. Floor Field Tile Size: 3 by 6 inches. f. Moisture Absorption: Les than 0.5 percent. g. Trim Name: Bullnose, Cove Base, Cove Corner. 7. Series: Montego. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 12 by 24 inches. d. Floor Field Tile Size: 12 by 12 inches. e. Floor Field Tile Size: 3 by 3 inches. f. Moisture Absorption: Les than 0.5 percent. g. Trim Name: Bullnose. 8. Series: Sure Step II and Paver. a. Floor Field Tile Size: 6 by 6 inches. b. Moisture Absorption: Less than 3.0 percent. c. Surface Finishes: Plain, Rustic, Textured. d. Trim Name: Bullnose, Bullnose Outcorner, Cove Base Corner, Inside Corner. 9. Series: Torre Venato. a. Floor Field Tile Size: 13 by 13 inches. b. Floor Field Tile Size: 20 by 20 inches. c. Floor Field Tile Size: 3 by 3 inches. d. Floor Field Tile Size: 6 1/2 by 6 1/2 inches. e. Floor Field Tile Size: 9 by 12 inches. f. Surface Finishes: Plain, Unpolished g. Trim Name: Cove Base Outcorner, Quarter Round, Quarter Round Corner, Bullnose, Bullnose Corner, Bullnose Outcorner, Counter Rail, Counter Rail Corner. 10. Series: Treymont. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Surface Finishes: Flamed, Honed, Rustic, Plain, Polished. d. Trim Name: Bullnose. 11. Series: Urban Tones. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 6 by 12 inches. d. Floor Field Tile Size: 6 by 18 inches. e. Floor Field Tile Size: 6 by 6 inches. f. Moisture Absorption: Less than 0.5 percent.

09300-6 g. Surface Finishes: Flamed, Honed, Plain, Polished, Rustic. Textured. h. Trim Name: Cove Base Outcorner, Cover Base, Bullnose, Bullnose Corner, Bullnose Outcorner. 12. Series: Vallano. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 3 by 12 inches. d. Floor Field Tile Size: 3 by 8 inches. e. Floor Field Tile Size: 6 by 6 inches. f. Moisture Absorption: Less than 3 percent. g. Surface Finishes: Flamed, Honed, Plain, Polished, Rustic. Textured. h. Trim Name: Cove Base Outcorner, Cover Base, Bullnose, Bullnose Corner, Bullnose Outcorner, Quarter Round, Quarter Round Corner, Counter Rail, Counter Rail Corner, Floor/Wall Bullnose Outcorner.

C. Quarry Tile: 1. Series: Quarry Naturals. a. Floor Field Tile Size: 3 7/8 by 8 inches. b. Floor Field Tile Size: 6 by 6 inches. c. Floor Field Tile Size: 8 by 8 inches. d. Moisture Absorption: Less than .3 percent. e. Surface Finishes: Rustic, Plain, Honed, Textured. f. Trim Name: Bullnose, Bullnose Outcorner, Corners, Transition Trim, Cove Round Top, Cove Base Outcorner. 2. Series: Quarry Tile. a. Floor Field Tile Size: 3 7/8 by 8 inches. b. Floor Field Tile Size: 6 by 6 inches. c. Moisture Absorption: Less than 3 percent. d. Surface Finishes: Rustic, Plain, Honed, Textured. e. Trim Name: Bullnose, Bullnose Outcorner, Corners, Transition Trim, Cove Round Top, Cove Base Outcorner. 3. Series: Sure Step II and Paver. a. Floor Field Tile Size: 6 by 6 inches. b. Moisture Absorption: Less than 3 percent. c. Surface Finishes: Rustic, Plain, Textured. d. Trim Name: Bullnose, Bullnose Outcorner, Cove Base Corner, Inside Corner.

D. Floor and Wall Tile: 1. Series: Ash Creek. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 3 by 12 inches. d. Floor Field Tile Size: 3 by 3 inches. e. Floor Field Tile Size: 3 by 9 inches. f. Floor Field Tile Size: 4 by 8 1/2 inches. g. Floor Field Tile Size: 6 by 6 inches. h. Moisture Absorption: 3.5 percent to 20 percent. i. Surface Finishes: Flamed, Honed, Rustic, Plain, Polished. j. Trim Name: Bullnose, Surface Bullnose, Surface Bullnose Corner, Bullnose Corner, Counter Rail, Counter Rail Corner, Mud Cap, Mud Cap Corner, Quarter Round, Quarter Round Corner. 2. Series: Avante. a. Floor Field Tile Size: 20 by 20 inches. b. Floor Field Tile Size: 13 by 20 inches. c. Floor Field Tile Size: 13 by 13 inches.

09300-7 d. Floor Field Tile Size: 10 by 14 inches. e. Floor Field Tile Size: 3 by 6 inches. f. Floor Field Tile Size: 2 by 4 inches (12 by 12 inches sheet). g. Moisture Absorption: Less than 3 percent for mosaic tile, less than 0.5% for floor tile, less than 20 percent for wall tile. h. Trim Name: Bullnose, Surface Bullnose, Surface Bullnose Corner, Surface Bullnose Outcorner, Cove Base, Cove Base Outcorner. 3. Series: Bevalo. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 18 by 18 inches. d. Floor Tile Moisture Absorption: Less than 0.5 percent. e. Wall Tile Size: 10 by 14 inches. f. Wall Tile Moisture Absorption: Less than 20 percent. g. Trim Name: Floor Bullnose, Wall Bullnose, Wall Bullnose Corner, Mosaic Bullnose Corner, Cove Base and Cove Base Outcorner. h. Color: Dove. i. Color: Mist. j. Color: Charcoal. k. Color: Earth. 4. Series: Carriage House. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 2 by 2 inches. d. Floor Field Tile Size: 2 by 8 inches. e. Floor Field Tile Size: 3 by 8 inches. f. Floor Field Tile Size: 4 by 12 inches. g. Floor Field Tile Size: 6 by 6 inches. h. Floor Field Tile Size: 4 by 4 inches. i. Floor Field Tile Size: 8 by 10 inches. j. Moisture Absorption: 3.0 percent to 20 percent. k. Surface Finishes: Flamed, Honed, Rustic, Plain, Textured, Polished. l. Trim Name: Bullnose, Surface Bullnose, Surface Bullnose Corner, Bullnose Corner, Counter Rail, Counter Rail Corner, Mud Cap, Mud Cap Corner, Quarter Round, Quarter Round Corner. 5. Series: Castlegate. a. Floor Field Tile Size: 18 by 18 inches. b. Floor Field Tile Size: 12 by 12 inches. c. Floor Field Tile Size: 9 by 12 inches. d. Floor Field Tile Size: 2 by 2 inches (12 by 24 inches sheet). e. Moisture Absorption: Less than 3 percent for mosaic tile, less than 0.5% for floor tile, less than 20 percent for wall tile. f. Trim Name: Bullnose, Surface Bullnose, Surface Bullnose Outcorner, Mosaic Bullnose. 6. Series: Costa Rei. a. Floor Field Tile Size: 1 by 14 inches. b. Floor Field Tile Size: 10 by 14 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Floor Field Tile Size: 12 by 18 inches. e. Floor Field Tile Size: 12 by 20 inches. f. Floor Field Tile Size: 18 by 18 inches. g. Floor Field Tile Size: 2 by 1 inches. h. Floor Field Tile Size: 2 by 10 inches. i. Floor Field Tile Size: 2 by 2 inches. j. Floor Field Tile Size: 2 by 4 inches. k. Floor Field Tile Size: 3 by 14 inches.

09300-8 l. Floor Field Tile Size: 3 by 6 inches. m. Floor Field Tile Size: 6 by 6 inches. n. Moisture Absorption: 3.0 percent to 20 percent. o. Surface Finishes: Flamed, Honed, Rustic, Plain, Textured, Polished. p. Trim Name: Bullnose, Surface Bullnose, Surface Bullnose Corner, Bullnose Corner, Counter Rail, Counter Rail Corner, Mud Cap, Mud Cap Corner, Quarter Round Corner. 7. Series: Danya. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 18 by 18 inches. d. Floor Tile Moisture Absorption: Less than 0.5 percent. e. Wall Tile Size: 10 by 14 inches. f. Wall Tile Moisture Absorption: Less than 20 percent. g. Trim Name: Floor Bullnose, Wall Bullnose, Wall Bullnose Corner, Mosaic Bullnose. h. Color: Stream. i. Color: Cove. j. Color: Riverbed. k. Color: Basin. 8. Series: Decorum. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Floor Field Tile Size: 12 by 12 inches. e. Moisture Absorption: Less than 0.5 percent for tile, in all three finishes. f. Trim Name: Bullnose, Cove Base, Cove Base Outcorner. 9. Series: Entity. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Floor Field Tile Size: 12 by 12 inches. e. Floor Field Tile Size: 6 by 24 inches. f. Moisture Absorption: Less than 0.7 percent for tile, in both finishes. g. Trim Name: Bullnose, Cove Base, Cove Base Outcorner. Trim are unpolished. 10. Series: Mirasol. a. Floor Field Tile Size: 24 by 24 inches. b. Floor Field Tile Size: 12 by 24 inches. c. Floor Field Tile Size: 12 by 12 inches. d. Floor Field Tile Size: 10 by 14 inches. e. Floor Field Tile Size: 2 by 4 inches (12 by 12 inches sheet). f. Moisture Absorption: Less than 0.5% percent for mosaic and floor tile, less than 20 percent for wall tile. g. Trim Name: Bullnose, Surface Wall Bullnose, Surface Bullnose, Surface Bullnose Outcorner. 11. Series: Port West. a. Floor Field Tile Size: 12 by 24 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 13 by 13 inches. d. Moisture Absorption: 3 percent to 4 percent. e. Trim Name: Bullnose. 12. Series: Pozzalo. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 18 by 18 inches. c. Floor Field Tile Size: 2 by 2 inches.

09300-9 d. Floor Field Tile Size: 6 by 6 inches. e. Floor Field Tile Size: 9 by 12 inches. f. Surface Finishes: Flamed, Honed, Textured, Rustic, Plain, Polished. g. Trim Name: Bullnose, Counter Rail, Counter Rail Corner, Mosaic Bullnose, Quarter Round, Quarter Round Corner, Radius Bullnose, Radius Bullnose Outcorner, Surface Bullnose, Surface Bullnose Corner. 13. Series: Salcedo. a. Floor Field Tile Size: 18 by 18 inches. b. Floor Field Tile Size: 12 by 12 inches. c. Floor Field Tile Size: 10 by 14 inches. d. Floor Field Tile Size: 2 by 2 inches (12 by 24 inches sheet). e. Moisture Absorption: Less than 3 percent for field tile and mosaic tile, less than 20 percent for wall tile. f. Trim Name: Bullnose, Surface Bullnose, Surface Bullnose Outcorner, Mosaic Bullnose. 14. Series: Stone Claire. a. Floor Field Tile Size: 20 by 20 inches (508 mm by 508 mm). b. Floor Field Tile Size: 13 by 20 inches (330 mm by 508 mm). c. Floor Field Tile Size: 13 by 13 inches (330 mm by 330 mm). d. Floor Field Tile Size: 6-1/2 by 6-1/2 inches (165 mm by 165 mm). e. Wall Field Tile Size: 10 by 14 inches (254 mm by 356 mm). f. Wall Field Tile Size: 3 by 6 inches (76 mm by 152 mm). g. Moisture Absorption (Wall): Less than 20 percent. h. Moisture Absorption (Floor): Less than 0.5 percent. i. Trim Name: Bullnose, Surface Wall Bullnose, Surface Wall Bullnose Outcorner and Mosaic Bullnose. j. Color: Bluff. k. Color: Ashen. l. Color: Russet.

E. Wall Tile: 1. Series: Bright. a. Floor Field Tile Size: 4 1/4 by 4 1/4 inches. b. Floor Field Tile Size: 6 by 6 inches. c. Moisture Absorption: Less than 20 percent. d. Surface Finishes: Plain, Rustic, Textured, e. Trim Name: Bullnose, Bullnose Corner, Quarter Round, Quarter Round Outcorner, Radius Bullnose, Radius Bullnose Outcorner, Cove Base, Cove Base Corner, Sink Rail, Sink Rail Incorner, Sink Rail Outcorner, Thin Lip Cove Base, Thin Lip Cove Base Corner. 2. Series: Ceramic Bath Accessories. 3. Series: Designer Elegance. a. Floor Field Tile Size: 1 by 10 inches. b. Floor Field Tile Size: 1 by 12 inches. c. Floor Field Tile Size: 1 by 4 inches. d. Floor Field Tile Size: 1 by 8 inches. e. Floor Field Tile Size: 2 by 10 inches. f. Floor Field Tile Size: 2 by 12 inches. g. Floor Field Tile Size: 2 by 2 inches. h. Floor Field Tile Size: 2 by 3 1/2 inches. i. Floor Field Tile Size: 2 by 8 inches. j. Floor Field Tile Size: 3 1/2 by 8 inches. k. Floor Field Tile Size: 4 1/4 by 4 1/4 inches. l. Floor Field Tile Size: 4 by 11 inches. m. Floor Field Tile Size: 4 by 11 3/4 inches.

09300-10 n. Floor Field Tile Size: 4 by 12 inches. o. Floor Field Tile Size: 4 by 13 inches. p. Floor Field Tile Size: 4 by 8 inches. 4. Series: Glass Block. a. Floor Field Tile Size: 4 by 8 inches. b. Floor Field Tile Size: 6 by 6 inches. c. Floor Field Tile Size: 6 by 8 inches. d. Floor Field Tile Size: 8 by 4 inches. e. Floor Field Tile Size: 8 by 6 inches. f. Floor Field Tile Size: 8 by 8 inches. g. Surface Finishes: Plain. 5. Series: Linea. a. Floor Field Tile Size: 1 by 8 inches. b. Floor Field Tile Size: 1/2 by 6 inches. c. Floor Field Tile Size: 1/2 by 8 inches. d. Floor Field Tile Size: 2 by 2 inches. e. Floor Field Tile Size: 2 by 6 inches. f. Floor Field Tile Size: 3/4 by 12 inches. g. Moisture Absorption: Less than 20 percent 6. Series: Matte. a. Floor Field Tile Size: 4 1/4 by 4 1/4 inches. b. Floor Field Tile Size: 6 by 6 inches. c. Moisture Absorption: Less than 20 percent. d. Surface Finishes: Plain, Rustic, Textured. e. Trim Name: Sink Rail, Sink Rail Incorner, Sink Rail Outcorner, Thin Lip Cove Base, Thin Lip Cove Base Corner, Bullnose, Bullnose Corner, Cove Base Corner, Quarter Round, Radius Bullnose, Radius Bullnose Outcorner, Radius Outcorner, Wall Bullnose, Wall Bullnose Corner, Cove Base, Cove Base Corner. 7. Series: Profiles. a. Floor Field Tile Size: 3 by 6 inches. b. Floor Field Tile Size: 6 by 6 inches. c. Moisture Absorption: Less than 20 percent. d. Surface Finishes: Plain, Rustic, Textured. e. Trim Name: Sink Rail, Sink Rail Incorner, Sink Rail Outcorner, Thin Lip Cove Base, Thin Lip Cove Base Corner, Bullnose, Bullnose Corner, Cove Base Corner, Quarter Round, Quarter Round Corner, Radius Bullnose, Radius Bullnose Incorner, Radius Bullnose Outcorner, Radius Outcorner, Wall Bullnose, Wall Bullnose Corner. 8. Series: Resin Bath Accessories. 9. Series: Switch Plates. a. Floor Field Tile Size: 4 13/16 by 4 7/8 inches. b. Floor Field Tile Size: 4 13/16 by 6 1/2 inches. c. Floor Field Tile Size: 4 15/16 by 3 3/16 inches. d. Floor Field Tile Size: 5 1/2 by 3 1/2 inches. e. Floor Field Tile Size: 5 1/2 by 5 1/2 inches. f. Floor Field Tile Size: 5 3/16 by 3 1/4 inches. g. Floor Field Tile Size: 5 3/16 by 5 3/16 inches. 10. Series: Urban Canvas. a. Floor Field Tile Size: 1 1/2 by 12 3/4 inches. b. Floor Field Tile Size: 1 by 12 inches. c. Floor Field Tile Size: 1 by 12 3/4 inches. d. Floor Field Tile Size: 1/2 by 8 1/2 inches. e. Floor Field Tile Size: 2 by 12 3/4 inches. f. Floor Field Tile Size: 2 by 4 inches. g. Floor Field Tile Size: 2 by 8 inches.

09300-11 h. Floor Field Tile Size: 2 by 8 1/2 inches. i. Floor Field Tile Size: 3 by 8 1/2 inches. j. Floor Field Tile Size: 4 1/4 by 12 3/4 inches. k. Floor Field Tile Size: 4 1/4 by 8 1/2 inches. l. Moisture Absorption: Less than 20 percent. m. Surface Finishes: Plain. n. Trim Name: Bullnose, Bullnose Corner, Flat Top Cove Base, Quarter Round, Surface Bullnose, Flat Top Cove Base.

F. Glass and Metal Tile: 1. Series: Garden Oasis Glass. a. Field Wall Tile Size: 3 by 6 inches. b. Trim: Bar and scallop liner. 3/4 inch by 7-3/4 inches (19 mm by 197 mm). c. Tile Color: Calla Lilly White. d. Tile Color: Soft Hydrangea Blue. e. Tile Color: Light Fern Green. f. Tile Color: Twig Brown. g. Tile Color: Dried Thistle Tan. h. Tile Color: Garden Mist Gray. i. Tile Color: Oasis Palm. j. Tile Color: Earthen Bronze. k. Moisture Absorption: Less than 0.5 percent. 2. Series: Legacy Glass. a. Floor Field Tile Size: 1 by 1 inch. b. Floor Field Tile Size: 1/2 by 6 inches. c. Floor Field Tile Size: 2 by 2 inches. d. Floor Field Tile Size: 2 by 4 1/4 inches. e. Floor Field Tile Size: 5/8 by 5/8 inches. f. Moisture Absorption: Less than .01 percent 3. Series: Saxon Metals. a. Floor Field Tile Size: 1 by 12 inches. b. Floor Field Tile Size: 12 by 16 inches. c. Floor Field Tile Size: 2 1/2 by 12 inches. d. Floor Field Tile Size: 2 by 12 inches. e. Floor Field Tile Size: 2 by 2 inches. f. Floor Field Tile Size: 3 by 3 inches. g. Floor Field Tile Size: 4 1/4 by 4 1/4 inches. h. Floor Field Tile Size: 6 by 6 inches. i. Moisture Absorption: Less than 0.5 percent j. Surface Finishes: Plain, Rustic. 4. Series: Visionaire. a. Floor Field Tile Size: 5/8 by 1 1/4 inch. b. Floor Field Tile Size: 5/8 by 5/8 inch. c. Moisture Absorption: Less than .50 percent d. Surface Finishes: Frosted and Glossy.

G. Mosaic Tile: 1. Series: Bevalo Mosaics. a. Floor Field Tile Size: 3 by 3 inches (76 mm by 76 mm). 12/24 sheet - dot mounted. b. Moisture Absorption: Less than 3 percent. c. Trim Name: Floor Bullnose, Wall Bullnose, Wall Bullnose Corner, Mosaic Bullnose Corner, Cove Base and Cove Base Outcorner. d. Color: Dove. e. Color: Mist.

09300-12 f. Color: Charcoal. g. Color: Earth. 2. Series: Chloe. a. Moisture Absorption: From .07 to 0.5 percent. 3. Series: Danya Mosaics. a. Floor Field Tile Size: 3 by 3 inches (76 mm by 76 mm). 12/24 sheet - dot mounted. b. Moisture Absorption: Less than 3 percent. c. Trim Name: Floor Bullnose, Wall Bullnose, Wall Bullnose Corner, Mosaic Bullnose Corner, Cove Base and Cove Base Outcorner. d. Color: Stream. e. Color: Cove. f. Color: Riverbed. g. Color: Basin. 4. Series: Garden Oasis Glass. a. Wall Tile Size: 3/4 by 1-1/2 inches (19 mm by 38 mm). b. Brick Joint Mosaic (solid color): 12/12 wall tile sheet. c. Trim: Bar and scallop liner. 3/4 inch by 7-3/4 inches (19 mm by 197 mm). d. Tile Solid Color: Calla Lilly White. e. Tile Solid Color: Soft Hydrangea Blue. f. Tile Solid Color: Light Fern Green. g. Tile Solid Color: Twig Brown. h. Tile Solid Color: Dried Thistle Tan. i. Tile Solid Color: Garden Mist Gray. j. Tile Solid Color: Oasis Palm. k. Tile Solid Color: Earthen Bronze. l. Brick Joint Mosaic (blend): 12/12 wall tile sheet. m. Brick Joint Mosaic (random linear blend): 13/12 wall tile sheet. n. Tile Blend Color: Daylight Sky Blend. o. Tile Blend Color: Afternoon Meadow Blend. p. Tile Blend Color: Marsh Fog Blend. q. Tile Blend Color: Prairie Dusk Blend. r. Tile Blend Color: Fresh Pastures Blend. s. Tile Blend Color: Evening Fields Blend. t. Moisture Absorption: Less than 0.5 percent. 5. Series: Lyndhurst Mosaics. a. Floor Field Tile Size: 2 by 2 inches. b. Moisture Absorption: Less than 3 percent. c. Surface Finishes: Plain. d. Trim Name: Bullnose, Bullnose Corner. 6. Series: Satinbrites. a. Floor Field Tile Size: 2 by 2 inches. b. Moisture Absorption: Less than 3 percent. c. Surface Finishes: Plain. d. Trim Name: Bullnose, Bullnose Outcorner, Cove Base, Cove Base Incorner, Cove Base Outcorner, Round Cap Incorner, Round Cap Outcorner, Stretcher, Universal Cove Base Outcorner, Built Up Base. 7. Series: Satinglo. a. Floor Field Tile Size: 1 by 1 inches. b. Floor Field Tile Size: 2 by 2 inches. c. Moisture Absorption: Less than 3 percent. d. Surface Finishes: Plain. e. Trim Name: Bullnose, Bullnose Outcorner, Cove Base, Cove Base Incorner, Cove Base Outcorner, Round Cap Incorner, Round Cap Outcorner, Stretcher, Universal Cove Base Outcorner, Built Up Base.

09300-13 8. Series: Stone Claire. a. Floor Field Tile Size: 3 by 3 inches (76 mm by 76 mm). 12/24 sheet - dot mounted. b. Moisture Absorption: Less than 8 percent. c. Trim Name: Bullnose, Surface Wall Bullnose, Surface Wall Bullnose Outcorner, Mosaic Bullnose. d. Color: Bluff. e. Color: Ashen. f. Color: Russet. 9. Series: Unglazed Mosaics and Options. a. Floor Field Tile Size: 1 1/4 by 1 1/4 inches. b. Floor Field Tile Size: 1 by 1 inches. c. Floor Field Tile Size: 2 by 1 inches. d. Floor Field Tile Size: 2 by 2 inches. e. Floor Field Tile Size: 3 by 3 inches. f. Floor Field Tile Size: 3/4 by 3/4 inches. g. Moisture Absorption: From .01 to 0.5 percent. h. Surface Finishes: Plain. i. Trim Name: Bullnose, Bullnose Outcorner, Cove Base, Cove Base Incorner, Cove Base Outcorner, Round Cap Incorner, Round Cap Outcorner, Stretcher, Universal Cove Base Outcorner, Built Up Base, Pool Nosing Corner, Pool Nosing, Universal Cove Base Outcorner.

H. Natural Stone Tile: 1. Series: Granite Collection. a. Floor Field Tile Size: 12 by 12 inches. b. Surface Finishes: Flamed, Honed, Plain, Polished, Rustic. 2. Series: Limestone Collection. 3. Series: Marble Collection. 4. Series: Medallion Collection. 5. Series: Slate Collection. a. Floor Field Tile Size: 12 by 12 inches. b. Floor Field Tile Size: 16 by 16 inches. c. Surface Finishes: Flamed, Honed, Plain, Polished, Textured. 6. Series: Travertine Collection.

2.3 TILE SETTING MATERIALS

A. Tile Setting Materials: Comply with ANSI A108/A118/A136.1 as applicable to the installation methods referenced in Part 3 of this Section.

B. Silicone Sealant: Silicone sealant, moisture and mildew resistant type, white; use for shower floors and shower walls.

C. Patching and Leveling Compound: As recommended by tile manufacturer and compatible with both substrate and setting materials.

D. Cleavage Membrane at Floors: Polyethylene film, ASTM D 4397, 4.0 mil thickness.

E. Membrane at Walls: Polyethylene film, ASTM D 4397, 4.0 mil thickness.

F. Cementitious Backer Board: High density, cementitious, glass fiber reinforced with 2 inch (50 mm) wide coated glass fiber tape for joints and corners: 1. Thickness: 1/4 inch (6 mm). 2. Thickness: 1/2 inch (13 mm). 3. Thickness: 5/8 inch (16 mm).

09300-14 G. Stone Thresholds: Provide stone thresholds uniform in color and finish and fabricated from the following material: 1. Material: Marble, ASTM C 503. 2. Material: Granite: ASTM C 615. 3. Material: Slate: ASTM C 629. 4. Color and Finish: As selected.

PART 3 EXECUTION

3.1 EXAMINATION

A. Acceptability of Surfaces: Inspect surfaces to be tiled to ensure proper bonding can be achieved, and to verify that surfaces are free of curing membranes, oil, grease, wax and dust.

B. Substrate Tolerances: Before tiling, inspect surfaces to be tiled to verify that the following tolerances are not exceeded. If tolerances are exceeded, provide specified leveling coat to achieve specified tolerances. 1. Walls: 1/8 inch in 8 feet (3 mm in 2.4 m) for dry-set mortar, epoxy and organic adhesives. 2. Floors: 1/8 inch in 10 feet (3 mm in 3 m) for dry-set mortar and epoxy; 1/16 inch in 3 feet (1.5 mm in 1 m) for organic adhesive.

3.2 PREPARATION

A. Layout: Determine locations of control and expansion joints before starting tile work. Layout tile work to minimize cuts less than one-half tile in size.

3.3 INSTALLATION

A. General: Comply with ANSI A108/A118/A136.1 and manufacturer's recommendations. Comply with applicable TCA Handbook for Tile Installation requirements as listed below.

B. Floors, Exterior, Patios and Walkways: 1. TCA F101, cement mortar, bonded. 2. TCA F102, dry-set mortar. 3. TCA F102, latex-Portland cement mortar.

C. Floors, Exterior, Roof Deck, Membrane: 1. TCA F103, cement mortar.

D. Floors, Exterior, Balcony Deck: 1. TCA F104, thin-set.

E. Floors, Interior, Concrete Subfloor: 1. TCA F111, cement mortar, cleavage membrane. 2. TCA F112, cement mortar, bonded. 3. TCA F113, dry-set mortar. 4. TCA F113, latex-Portland cement mortar. 5. TCA F114, cement mortar, epoxy grout. 6. TCA F114, cement mortar, furan grout. 7. TCA F115, latex-Portland cement mortar, epoxy grout. 8. TCA F115, latex-Portland cement mortar, furan grout. 9. TCA F116, organic adhesive. 10. TCA F116, epoxy adhesive. 11. TCA F200, poured gypsum underlayment, bonded.

09300-15 12. TCA F205, cementitious self leveling underlayment, bonded.

F. Floors, Interior, Concrete Subfloor, Waterproof Membrane: 1. TCA F121, cement mortar bed. 2. TCA F122, thin-set.

G. Floors, Interior, Concrete Subfloor, Crack Isolation Membrane: 1. TCA F125, partial coverage. 2. TCA F125A, full coverage. 3. TCA F128, young concrete, uncoupling membrane.

H. Floors, Interior-Chemical Resistant, Concrete Subfloor: 1. TCA F131, epoxy mortar and grout. 2. TCA F132, epoxy mortar and grout on cementitious mortar bed. 3. TCA F133, furan resin mortar and grout. 4. TCA F134, epoxy mortar and grout. 5. TCA F134, furan resin.

I. Floors, Interior, Cork Underlayment on Concrete: 1. TCA F135, latex-Portland cement mortar with epoxy grout.

J. Floors, Interior, Radiant Heat on Concrete: 1. TCA RH110, hydronic system. 2. TCA RH111, poured gypsum underlayment, hydronic system, thin-set. 3. TCA RH112, cementitious self-leveling underlayment, hydronic system, thin- set. 4. TCA RH115, latex-Portland cement mortar, electric system. 5. TCA RH116, cementitious self-leveling underlayment, bonded electric system thin set.

K. Floors, Interior, Radiant Heat on Wood Subfloor: 1. TCA RH122, poured gypsum underlayment hydronic system thin-set. 2. TCA RH123, cementitious self-leveling underlayment, hydronic system thin- set. 3. TCA RH130, EGP (exterior glue plywood) latex-Portland cement mortar electric system. 4. TCA RH135, backer board electric system thin-set. 5. TCA RH140, cementitious self-leveling underlayment electric system.

L. Floors, Interior, Wood Subfloor: 1. TCA F141, cement mortar. 2. TCA F142, organic adhesive. 3. TCA F143, epoxy mortar and grout. 4. TCA F144, cementitious backer unit/fiber cement underlayment thin-set. 5. TCA F145, cement mortar, metal lath. 6. TCA F146, coated glass mat water-resistant gypsum backer board latex- Portland cement mortar. 7. TCA F147, uncoupling membrane, 24 inch on center joist spacing, thin-set. 8. TCA F148, uncoupling membrane, 19.2 inch on center joist spacing, thin-set. 9. TCA F149, plywood underlayment, 24 inch on center joist spacing, EGP (exterior glue plywood) latex-Portland cement mortar. 10. TCA F150, EGP (exterior glue plywood) latex-Portland cement mortar. 11. TCA F151, coated glass mat water-resistant gypsum backer board, 24 inch on center joist spacing, latex-Portland cement mortar. 12. TCA F152, membrane system, 24 inch on center joist spacing, latex-Portland cement mortar. 13. TCA F155, OSB subfloor, 24 inch on center joist spacing, EPG latex-Portland

09300-16 cement mortar. 14. TCA F160, EG/LWP (exterior glue/laminated wood panel underlayment) latex- Portland cement mortar. 15. TCA F170, fiber-reinforced water-resistant gypsum backer board latex- Portland cement mortar. 16. TCA F175, cementitious-coated foam backer board dry set mortar. 17. TCA F175, cementitious-coated foam backer board latex-Portland cement mortar. 18. TCA F180, poured gypsum underlayment, 16 inch on center joist spacing. 19. TCA F185, cementitious self leveling underlayment, 19.2 inch joist spacing, latex-Portland cement mortar.

M. Walls, Exterior and Interior: 1. TCA W201, cement mortar. 2. TCA W202, dry-set mortar. 3. TCA W202, latex-Portland cement mortar.

N. Walls, Interior, Masonry or Concrete: 1. TCA W211, cement mortar, bonded. 2. TCA W215, spot-bonding epoxy.

O. Walls, Interior, Solid Backing: 1. TCA W221, cement mortar. 2. TCA W222, one-coat method. 3. TCA W223, organic adhesive.

P. Walls, Interior, Wood Studs or Furring: 1. TCA W231, cement mortar.

Q. Walls, Interior, Metal Studs: 1. TCA W241, cement mortar. 2. TCA W242, gypsum board organic adhesive.

R. Walls, Interior, Wood or Metal Studs: 1. TCA W243, gypsum board thin-set. 2. TCA W244C, interior, thin-set. 3. TCA W244E, exterior, cementitious backer unit. 4. TCA W244F, fiber cement underlayment. 5. TCA W245, coated glass mat water-resistant gypsum backer board. 6. TCA W246, cementitious-coated foam backer board. 7. TCA W247, fiber-reinforced water-resistant gypsum backer board. 8. TCA W260, spot-bonding epoxy cementitious backer unit.

S. Ceilings, Soffits, Interior: 1. TCA C311, general. 2. TCA C312, gypsum board. 3. TCA C315, backer board.

T. Bathtub Walls (No Showerhead), Wood or Metal Studs: 1. TCA B413, gypsum board.

U. Bathtub/Shower Walls, Wood or Metal Studs: 1. TCA B411, cement mortar. 2. TCA B412, cementitious backer unit/fiber cement underlayment. 3. TCA B419, coated glass mat water-resistant gypsum backer board. 4. TCA B425, cementitious-coated foam backer board. 5. TCA B430, fiber-reinforced water-resistant gypsum backer board.

09300-17 V. Shower Receptors, Wood or Metal Studs: 1. TCA B414, cement mortar. 2. TCA B415, cementitious backer unit/fiber cement underlayment. 3. TCA B420, coated glass mat water-resistant gypsum backer board. 4. TCA B421, solid backing, bonded waterproof membrane. 5. TCA B422, solid backing with integrated bonding flange for bonded waterproof membranes. 6. TCA B426, cementitious-coated foam backer board. 7. TCA B431, fiber-reinforced water-resistant gypsum backer board.

W. Shower Receptor, Renovation: 1. TCA TR418, cement mortar. 2. TCA TR420, thin-set.

X. Countertops, Wood Base: 1. TCA C511, cement mortar. 2. TCA C512, thin-set. 3. TCA C513, backer board.

Y. Steam Rooms, Membrane: 1. TCA SR613, cement mortar. 2. TCA SR614, thin-set.

Z. Renovation, Tile Over Tile: 1. TCA TR711, walls and floors, tile over other surfacing materials, organic adhesive, interiors only. 2. TCA TR711, walls and floors, tile over other surfacing materials, dry-set mortar, interior and exterior. 3. TCA TR711, walls and floors, tile over other surfacing materials, latex- Portland cement mortar, interior and exterior. 4. TCA TR711, walls and floors, tile over other surfacing materials, tile-setting epoxy mortar. 5. TCA TR711, walls and floors, tile over other surfacing materials, tile-setting epoxy adhesive. 6. TCA TR711, walls and floors, tile over other surfacing materials, tile-setting modified epoxy emulsion mortar. 7. TCA TR712, interior floors, tile over tile. 8. TCA TR713, interior walls, tile over tile.

AA. Tile Tubs, Fountains and Curbs, Waterproof Membrane: TCA B417, cement mortar.

BB. Swimming Pools: TCA P601.

CC. Stairs: TCA S151, cement mortar.

DD. Refrigerator Rooms, Insulation: TCA R612, cement mortar.

EE. Window Stools: TCA WS610.

FF. Thresholds: TCA TR611.

GG. Glass Tile: As recommended by manufacturer.

HH. Metal and Metalized Tile: As recommended by manufacturer.

3.4 CLEANING AND PROTECTION

A. Cleaning: Clean tile within time period recommended by manufacturer, using

09300-18 materials recommended by manufacturer.

B. Protection: Prohibit foot and wheeled traffic from floors for a minimum of 3 days. Where traffic is unavoidable, provide large flat boards in walkways and wheelways for a minimum of 7 days after installation. Protect from construction dirt and debris with heavy-duty, non-staining construction paper, masked in place.

3.5 SCHEDULE

A. Schedule of Tile and Setting Methods:

END OF SECTION

09300-19