The Registration Permit for Wood Working Operations Cover Any Operation Involving the Generation

Bureau of Air Quality Registration Permit Application Wood Working Operations

The registration permit for Wood Working Operations cover any operation involving the generation of small wood waste particles (shavings, sanderdust, sawdust, etc.) by any kind of mechanical manipulation of wood or wood byproducts. Includes, but is not limited to, sawing, planing, chipping, shaping, moulding, hogging, lathing and sanding and all applicable control devices such as baghouses, cyclones, and portable dust collectors or any internal combustion engines that may be used to power the woodworking equipment. Additionally, it covers any wood working waste transfer or collection units such as silos, cyclones, trailers, conveyors, etc. Some woodworking facilities also conduct surface finishing. This permit also covers the surface finishing of woods and all applicable finishing materials, control devices such as paint booth filters, cartridges, etc, and dryers, burn-off and curing ovens.

FACILITY INFORMATION SC Air Permit Number (8-digits only): - Application Date: Facility Name: Facility Federal Tax Identification Number: Primary SIC Code: Primary NAICS Code: Physical Address: County: City: State: SC Zip Code: Facility Coordinates Latitude: Longitude: NAD27 or NAD83

AIR PERMIT CONTACT Title/Position: Salutation: First Name: Last Name: Mailing Address (if different): City: State: Zip Code: E-mail Address: Phone No.: ( ) - Cell No.: ( ) -

OWNER OR OPERATOR Title/Position: Salutation: First Name: Last Name: Mailing Address (if different): City: State: Zip Code: E-mail Address: Phone No.: ( ) - Cell No.: ( ) - I certify that this facility meets the criteria and agrees to the conditions and terms of the permit. I certify, to the best of my knowledge and belief, that no applicable standards and/or regulations will be contravened or violated. I certify that any application form, report, or compliance certification submitted in this permit application is true, accurate, and complete based on information and belief formed after reasonable inquiry. I understand that any statements and/or descriptions, which are found to be incorrect, may result in the immediate revocation of any permit issued for this application.

Signature of Owner or Operator Date

DHEC 0872 (10/2013) Bureau of Air Quality Registration Permit Application Wood Working Operations

EQUIPMENT INFORMATION Complete and submit the “Wood Working Emissions Estimator - Wood Waste and/or Wood EF” along with this application. If a calculation method other than the Bureau Emission Estimator is used, please provide an example calculation with this application. Wood Working Equipment Installation / Control Device / Collection Equipment Make/Model Emission Point Modification Date Unit Example: Molder Bridgewood 1999 / N/A Cyclone #1 Cyclone #1

of 4 EQUIPMENT INFORMATION If the facility performs surface finishing, please complete and submit the “Surface Finishing Emission Estimator.” If the facility has combustion sources, please complete and submit the “Wood Working Combustion Emission Estimator.” If a calculation method other than the Bureau Emission Estimator is used, please provide an example calculation with this application. Combustion Sources Manufacture/ Maximum Maximum Rated Capacity Primary Secondary Equipment Make/Model Installation/ Sulfur Content Sulfur (Units) Fuel Fuel Modification Date (%) Content (%) 5.00 million Example: Curing Oven #1 Brownells 1977 /N/A Natural Gas N/A No. 2 Fuel Oil 0.05 BTU/hr

Paint Booths Installation/ Modification Equipment Make/Model Control Device Emission Point Date Example: Paint Booth #1 Nova Verta 2010 / N/A Filters PB#1

EMISSIONS INFORMATION Pollutant Total Particulate Particulate Volatile Highest Particulate Nitrous Hazardous Matter <10 Matter <2.5 Organic Hazardous Process Matter Oxides Air microns microns Compounds Air Pollutant (PM) (NOx) Pollutant (PM10) (PM2.5) (VOCs) (HAP) (TPY) (TPY) (HAP) (TPY) (TPY) (TPY) (TPY) (TPY) Wood Working Totals Source Test Data Wood Waste Tab Wood EF Tab N/A Other (Specify)

Total Surface Finishing Totals VOC-PM N/A Tab HAPs Tab N/A Other (Specify) N/A

Total N/A Usage Rate

(gallons/year) Combustion Source Totals Fuel Source Combustion Calculator Other (Specify) N/A

Total Facility Wide Totals Woodworking Totals + Surface Finishing Totals + Combustion Source Total

DHEC 0872 (10/2013)