Profibus International Certified Training Courses

PROFIBUS TRAINING COURSE REGISTRATION FORMS

PLEASE FAX COMPLETED REGISTRATION FORMS TO +27 11 465-8890

Instructions:

1. Read the information regarding course starting times, venues, food and accommodation 2. Complete an applicant information form (Section A) for EACH trainee 3. Complete the relevant order information for invoicing (Section B) 4. Read the conditions for registration and sign the order 5. Ensure that the correct number applicant information forms is included with your order and that this is reflected on the order information page 6. Fax the completed forms to +27 11 467-8890 Course Prerequisites and Positioning

l Certified Installer’s Troubleshooting t

Troubleshooting l

Course and Maintenance and Maintenance s

n Course and ASi Course c

Certified Engineer’s Course i

Certified PA Engineers Course

The above diagram illustrates the course target audience, course prerequisites and general training progression. All courses involve a Certified PROFIBUS Examination at the end of the course.

It should be noted all courses are of an international standard and candidates should be capable of rapid understanding of or be familiar with the concepts of digital systems and their operation. Candidates, especially for the Installer’s class courses, often do not cope with the quantity and complexity of topics presented in the courses.

Course prerequisites:  Certified Installer’s, Troubleshooting and Maintenance and Troubleshooting and Maintenance & ASi courses: These have no prerequisites besides that of the candidate having adequate fundamental background knowledge or comprehension of digital systems.  Certified Engineer’s Course: Requires the attendance of the Certified Installer course on the week of attendance. Certified Installer’s courses are normally scheduled to run in the same week as the Engineer’s course for this reason. Attendees with Certified Installer certification can join the Engineer’s course on the second day.  Certified PA Engineer’s Course: Requires the Certified Engineer’s Course qualification.

IDX PROFIBUS Competence Centre  1 Weaver Street – Fourways – 2055 – South Africa +27 (11) 548-9960 +27 (11) 465-8890 www.profibuscentre.co.za Times: 8:00 – 17:00 All courses will commence at 8:00am sharp. Please take into consideration the Johannesburg traffic and give yourself sufficient traveling time. The day officially ends at 5:00pm (based on the progress of the group/course you may be released earlier). The Installer, Engineer and PA Engineer courses finish at approximately 14:00 on the final course day.

Venue: The Johannesburg courses will be run from the IDXOnline offices, based in Fourways, Johannesburg.

IDXOnline: 1 Weaver Street, Fourways (turn left into Kingfisher off William Nicol heading north, and then the first left thereafter)

Onsite courses are available on request – please contact [email protected]

Meals: All participants will be provided with tea and biscuits in the morning, a full lunch, and further tea and biscuits in the afternoon. Please indicate any dietary preference on your application form.

IDX PROFIBUS Competence Centre  1 Weaver Street – Fourways – 2055 – South Africa +27 (11) 548-9960 +27 (11) 465-8890 www.profibuscentre.co.za Accommodation: A list of nearby accommodation and restaurants is available from the PCC or on our website.

More Information Should you need any more information such as available course dates, fees, course outlines please contact the Profibus Competence Centre at IDX:

Email: [email protected] Tel: +27 (11) 548-9960 Fax: +27 (11) 465-8890

IDX PROFIBUS Competence Centre  1 Weaver Street – Fourways – 2055 – South Africa +27 (11) 548-9960 +27 (11) 465-8890 www.profibuscentre.co.za Section A (Please complete one form per applicant)

Note: All courses are of a high international standard and include examinations. We have found attendees are often not adequately prepared or skilled to undertake these courses.

JHB PROFIBUS Certified Engineer’s Course (3.5 Days) R14 000 (excl.) R 15 960 (incl.) DBN PROFIBUS Certified Engineer’s Course (3.5 Days) R14 900 (excl.) R 16 986 (incl.) JHB PROFIBUS Certified Installers Course (1.5 Days) R4 000 (excl.) R 4 560 (incl.) JHB PROFIBUS Certified Engineer’s Week (5 Days) R17 000 (excl.) R19 380(incl.) JHB Troubleshooting & Maintenance + Installer’s Exam (2 Days) R5 000 (excl.) R5700(incl.) DBN Troubleshooting & Maintenance + Installer’s Exam (2 Days) R5 500 (excl.) R6270 (incl.) JHB Troubleshooting & Maintenance +ASi Course (3 Days) R6 000 (excl.) R6840 (incl.) JHB PROFIBUS PA Engineers Module (2.5 Days) R 8 500 (excl.) R9 690(incl.)

Course Date: For an up to date training schedule please contact [email protected]

Applicant Information (please complete clearly for Certificate purposes)

Title: First Name(s): M Surname: ID Number: Position: Department:

Postal Address:

Code: Telephone: Mobile: Fax: Email:

Meals: Standard Vegetarian Kosher Halaal Other

Previous Knowledge: Good Fair Little None

IDX PROFIBUS Competence Centre  1 Weaver Street – Fourways – 2055 – South Africa +27 (11) 548-9960 +27 (11) 465-8890 www.profibuscentre.co.za Optional Extras: The following are available to PCC students at reduced cost.

PROFIBUS INTERNATIONALS “RECOMMENDATION FOR CABLING AND ASSEMBLY” Oil Resistant Paper (Order No: 8.022) R 410 excl. VAT

PROFIBUS Fast-Connect Cable stripping tool R1 440. excl. VAT

PROFIBUS NetTEST II Advanced Cable Test Kit R 32 900 excl. VAT*

PROFITrace Ultra PROFIBUS Troubleshooting Toolkit Plus With: PROFITrace, ScopeWare, Bar-Graph, Topology Scan and Automatic Report Generation R 34 900 excl. VAT*

* Subject to ROE adjustments. Must be ordered within 1 month of course attendance

IDX PROFIBUS Competence Centre  1 Weaver Street – Fourways – 2055 – South Africa +27 (11) 548-9960 +27 (11) 465-8890 www.profibuscentre.co.za Section B (Please complete once per training order)

Invoicing Information

We regret we only accept EFT payments – payment details to accompany invoice. Cheques are not accepted.

Attention: Company: Southern African RPA Member (15% discount on training) Department: VAT reg. Order No.

Telephone: Mobile: Fax: Email:

Send certificates directly to the candidates or Send certificates to the address below

Attention: Postal Address:

Number of trainee applications (Section A) attached:

IDX PROFIBUS Competence Centre  1 Weaver Street – Fourways – 2055 – South Africa +27 (11) 548-9960 +27 (11) 465-8890 www.profibuscentre.co.za Conditions for Registration

Certificates and Postage Please ensure that the postal addresses specified in Section A and/or B are valid. If applicant postal addresses are not available, please specify to have all certificates posted to a valid corporate postal address and administrative contact specified in Section B. All certificates are posted using registered mail. The PCC will not be responsible for certificates being lost due to incorrect postal address details being provided and will charge for any additional certificates and postage required.

Payment Please ensure that all payments are duly paid prior to commencement of the relevant course. Our commercial department will contact you once we have received this registration form to facilitate settlement of relevant course fees. No booking will be considered firm until payment has been received. The PCC retains the right to decline attendees access to training on the course date if payment has not been received.

Cancellations Bookings for all courses that are cancelled between 21 and 10 days prior to the course are subject to a 50% cancellation fee. Bookings that are cancelled 10 days prior to the course are subject to a 100% cancellation fee. We also reserve the right to cancel any course if an insufficient number of delegates have booked. In such an event, fees that have been paid will be refunded in full.

I have read and understood all the terms and conditions defined above for attendance of PCC courses.

Signed: At:

Full Name: Date:

IDX PROFIBUS Competence Centre  1 Weaver Street – Fourways – 2055 – South Africa +27 (11) 548-9960 +27 (11) 465-8890 www.profibuscentre.co.za