Window Washing Anchors

1SECTION 11 2423

WINDOW WASHING ANCHORS

This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be revealed or hidden by one of the following methods:

Microsoft Word 2010: Display the FILE tab on the ribbon, click OPTIONS, then on left menu click on DISPLAY. Under ALWAYS SHOW THESE select or deselect HIDDEN TEXT.

Microsoft Word 2007: Click the OFFICE button, select WORD OPTIONS, select DISPLAY, then select or deselect the HIDDEN TEXT option.

Corel WordPerfect: From the pull-down menus select VIEW, then select or deselect the HIDDEN TEXT option.

PART 1 GENERAL

1.1 SUMMARY

1.A. Section Includes:

1.A.1. Permanently-attached window washing anchors.

1.B. Related Sections: 1.B.1. Division 01: Administrative, procedural, and temporary work requirements. 1.B.2. Section [03 3000 - Cast-In-Place Concrete] [______- ______]: Cast-in-place concrete substrate to receive fall protection anchors. 1.B.3. Section [03 4500 - Precast Architectural Concrete] [______- ______]: Precast concrete substrate to receive fall protection anchors. 1.B.4. Section [05 1200 - Structural Steel] [______- ______]: Steel framing to receive fall protection anchors. 1.B.5. Section [05 3123 - Steel Roof Decking] [______- ______]: Steel decking to receive fall protection anchors. 1.B.6. Section [06 1100 - Framing and Sheathing] [______- ______]: Wood [framing] [and] [sheathing] to receive fall protection anchors. 1.B.7. Section [06 1733 - Wood I-Joists] [______- ______]: Wood framing to receive fall protection anchors. 1.B.8. Section [06 1753 - Shop-Fabricated Wood Trusses] [______- ______]: Wood framing to receive fall protection anchors.

1.2 REFERENCES

2.A. American National Standards Institute / International Window Cleaning Association (ANSI/IWCA) I-14.1 - Window Cleaning Safety Standard.

2.B. ASTM International (ASTM): 2.B.1. A36/A36M - Standard Specification for Carbon Structural Steel. 2.B.2. A182 - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service.

1.3 SYSTEM DESCRIPTION

3.A. Design window washing anchors and attachments in accordance with ANSI/IWCA 1-14.1.

Super Anchor Safety 11 2423- Window Washing Anchors 05.28.2014 1.4 SUBMITTALS

4.A. Submittals for Review: 4.A.1. Shop Drawings: Indicate window washing anchor types, locations, attachments, and relationship to adjacent construction. 4.A.2. Product Data: Manufacturer’s descriptive data including components, materials, and finishes. 4.A.3. Samples: Each window washing anchor.

1.5 QUALITY ASSURANCE

5.A. Manufacturer Qualifications: Firm specializing in design and fabrication of anchoring systems for structures with minimum 10 years experience.

PART 2 PRODUCTS

2.1 MANUFACTURERS

1.A. Contract Documents are based on products by Super Anchor Safety, 8522 - 216th Street SE, Woodinville, WA USA, phone 425-488-8868, fax 360-668-1717, email mailto:[email protected],[email protected], website www.superanchor.com.

1.B. Substitutions: [Under provisions of Division 01.] [Not permitted.]

2.2 MATERIALS

2.A. Steel: ASTM A36/A36M or equivalent.

2.B. Stainless Steel: ASTM A182/A182M.

2.3 COMPONENTS

3.A. Window Washing Anchors: 3.A.1. Product: Commercial Roof Anchor. 3.A.2. Construction: 3.A.2.a. Stem: [Steel] [Stainless steel] pipe, 3 inch diameter x 1/4 inch wall thickness, with 5/8 inch diameter [loop] [pass through] top. 3.A.2.b. Base plate: 16 x 16 inch x 3/8 inch thick [steel] [stainless steel] plate with attachment and drain holes. 3.A.2.c. Factory-applied identification plaque and warning label. 3.A.3. Stem height: [12] [18] [__] inches. 3.A.4. Finish: [Galvanized.] [Powder coated.] 3.A.5. [Storm caps] [and] [flashing bases]: ABS plastic.

2.4 ACCESSORIES

4.A. Fasteners: Manufacturer’s standard, corrosion resistant coated steel.

PART 3 EXECUTION

3.1 INSTALLATION

1.A. Install window washing anchors in accordance with manufacturer’s instructions and approved Shop Drawings.

Window Washing Anchors 11 2423- Super Anchor Safety 05.28.2014 1.B. Separate dissimilar metals with bituminous coating or gaskets to prevent electrolysis.

1.C. Place anchors level, aligned, evenly spaced, and tightly fitted.

1.D. Coordinate installation of anchors and flashings with adjacent materials installation to produce watertight installation.

END OF SECTION

Super Anchor Safety 11 2423- Window Washing Anchors 05.28.2014