EN 54-2: Control and Indicating Equipment

Doc No: BF 1113 annex 3 APPLICATION FORM Revision No: 01.2

Date: 08 November 2011 Application For Certification Of Fire Detection And Alarm Systems / Components Page: 1 of 2 - 1 -Page 1 of 2

EN 54-2: Control and indicating equipment

PSE Distributed CIE ? Addressable/ No. of No. of No. of No. of Model Ref. Internal-integrated/ No. of cabinets Conventional inputs outputs processors programs external Dis. A C intn. intg. ext. Dis. A C intn. intg. ext. Dis. A C intn. intg. ext. Dis. A C intn. intg. ext. Dis. A C intn. intg. ext. Dis. A C intn. intg. ext. Dis. A C intn. intg. ext. Dis. A C intn. intg. ext.

Any other information that may be relevant to this aspect of the certification:

Uncontrolled copy if printed. © BRE Global Ltd 2011 Valid on day of printing only. Doc No: BF 1113 annex 3 APPLICATION FORM Revision No: 01.2

Date: 08 November 2011 Application For Certification Of Fire Detection And Alarm Systems / Components Page: 2 of 2 - 2 -Page 2 of 2

Options with requirements:

Model Ref. 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 7.10.4 7.11 7.12.1 7.12.2 7.12.3 7.13 8.3 8.4 8.9 9.5 10 11

Clause titles: 7.8 Output to fire alarm devices, 7.9.1 Output to fire alarm routing equipment, 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Output Type A), 7.10.2 Outputs to fire protection equipment (Output Type B) 7.10.3 Outputs to fire protection equipment (Output Type C), 7.10.4 Fault monitoring of fire protection equipment , 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A) , 7.12.2 Dependencies on more than one alarm signal (Type B) 7.12.3 Dependencies on more than one alarm signal (Type C), 7.13 Alarm counter, 8.3 Fault signals from points, 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment, 9.5 Disablement of each addressable points, 10 Test condition, 11 Standardised input/output interface