Z

CHANDRAS’ CHEMICAL ENTERPRISES (PVT.) LTD.

TECHNICAL DATA SHEET

YAMAPOXY EPOXIDE RESIN & YAMAPOXY POLYAMIDE HARDENER

Product : Yamapoxy Epoxide Resin is an Epoxy based product & Yamapoxy Polyamide hardener is a modified polyamide based Hardener. It is a two component product. Appearance : Resin part: Colorless hazy viscous liquid Hardener part: Light yellow honey color viscous liquid. Viscosity : Resin part: 17000 ± 2000cps at 30 ± 2°C Hardener Part: For Summer: 19000 ± 2000cps at 35 ± 2°C For Winter: 20000 ± 2000cps at 30 ± 2°C Pot Life of 9g mix For summer: 60 – 70min at 35 ± 2°C (Mixing Ratio R:H = For Winter: 50 – 60min at 30 ± 2°C 1: 0.8 by weight 1: 1 by volume) Shear Strength (Al/ Al) 180 – 240kg/cm2 (After 24hrs of application) Application Method : Make sure that the surfaces to be bonded are clean, dry and free from grease/oil. Take equal volume from each component, as per the requirement and mix thoroughly both the components. After mixing, it may be applied within 40 to 50minutes (at 30°C). The setting time of the above mix is around 60min. However, final strength is achieved after 24 hrs. Advantages : Solventless Very easy to mix Excellent dimensional stability Negligible shrinkage Water resistance Usage : It can be used for bangle industries, marble setting, hardwear application, glass fixing, electronics application, automobile etc. Storage : Store in a cool & dry place. Keep away from direct heat and sunlight. Precaution : Pack should be airtight after taking out the material from container at all the time. Shelf life : 12 months from the date of manufacturing under proper storage condition. Material Safety Data Hazardous ingredients : Amine compound in the hardener part. Flash Point : >200°C Flammability : Moderate. Protection: : Wash hand after use. Keep away from reach of children.