Hazardous Substances Data Bank s1

Hazardous Substances Data Bank, National Library of Medicine, Bethesda, MD. http://toxnet.nlm.nih.gov/

Downloaded September, 2004

POLYBUTENE CASRN: 9003-29-6 For other data, click on the Table of Contents

Human Health Effects:

Human Toxicity Excerpts:

Vapor may act as a simple asphyxiant in high concentration. [U.S. Coast Guard, Department of Transportation. CHRIS - Hazardous Chemical Data. Volume II. Washington, D.C.: U.S. Government Printing Office, 1984-5.]**PEER REVIEWED**

Emergency Medical Treatment:

EMT Copyright Disclaimer: Portions of the POISINDEX(R) and MEDITEXT(R) database have been provided here for general reference. THE COMPLETE POISINDEX(R) DATABASE OR MEDITEXT(R) DATABASE SHOULD BE CONSULTED FOR ASSISTANCE IN THE DIAGNOSIS OR TREATMENT OF SPECIFIC CASES. The use of the POISINDEX(R) and MEDITEXT(R) databases is at your sole risk. The POISINDEX(R) and MEDITEXT(R) databases are provided "AS IS" and "as available" for use, without warranties of any kind, either expressed or implied. Micromedex makes no representation or warranty as to the accuracy, reliability, timeliness, usefulness or completeness of any of the information contained in the POISINDEX(R) and MEDITEXT(R) databases. ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ARE HEREBY EXCLUDED. Micromedex does not assume any responsibility or risk for your use of the POISINDEX(R) or MEDITEXT(R) databases. Copyright 1974-2004 Thomson MICROMEDEX. All Rights Reserved. Any duplication, replication, "downloading," sale, redistribution or other use for commercial purposes is a violation of Micromedex' rights and is strictly prohibited.

The following Overview, *** GENERAL OR UNKNOWN CHEMICAL ***, is relevant for this HSDB record chemical. Life Support:

o This overview assumes that basic life support measures have been instituted. Clinical Effects:

0.2.1 SUMMARY OF EXPOSURE 0.2.1.1 ACUTE EXPOSURE A) A SPECIFIC REVIEW on the clinical effects and treatment of individuals exposed to this agent HAS NOT YET BEEN PREPARED. The following pertains to the GENERAL EVALUATION and TREATMENT of individuals exposed to potentially toxic chemicals. B) GENERAL EVALUATION - 1) Exposed individuals should have a careful, thorough medical history and physical examination performed, looking for any abnormalities. Exposure to chemicals with a strong odor often results in such nonspecific symptoms as headache, dizziness, weakness, and nausea. C) IRRITATION - 1) Many chemicals cause irritation of the eyes, skin, and respiratory tract. In severe cases respiratory tract irritation can progress to ARDS/acute lung injury, which may be delayed in onset for up to 24 to 72 hours in some cases. 2) Irritation or burns of the esophagus or gastrointestinal tract are also possible if caustic or irritant chemicals are ingested. D) HYPERSENSITIVITY - 1) A number of chemical agents produce an allergic hypersensitivity dermatitis or asthma with bronchospasm and wheezing with chronic exposure. Laboratory:

A) A number of chemicals produce abnormalities of the hematopoietic system, liver, and kidneys. Monitoring complete blood count, urinalysis, and liver and kidney function tests is suggested for patients with significant exposure. B) If respiratory tract irritation or respiratory depression is evident, monitor arterial blood gases, chest x-ray, and pulmonary function tests. Treatment Overview:

0.4.2 ORAL EXPOSURE A) GASTRIC LAVAGE 1) Significant esophageal or gastrointestinal tract irritation or burns may occur following ingestion. The possible benefit of early removal of some ingested material by cautious gastric lavage must be weighed against potential complications of bleeding or perforation. 2) GASTRIC LAVAGE: Consider after ingestion of a potentially life-threatening amount of poison if it can be performed soon after ingestion (generally within 1 hour). Protect airway by placement in Trendelenburg and left lateral decubitus position or by endotracheal intubation. Control any seizures first. a) CONTRAINDICATIONS: Loss of airway protective reflexes or decreased level of consciousness in unintubated patients; following ingestion of corrosives; hydrocarbons (high aspiration potential); patients at risk of hemorrhage or gastrointestinal perforation; and trivial or non-toxic ingestion. B) ACTIVATED CHARCOAL 1) Activated charcoal binds most toxic agents and can decrease their systemic absorption if administered soon after ingestion. In general, metals and acids are poorly bound and patients ingesting these materials will not likely benefit from activated charcoal administration. a) Activated charcoal should not be given to patients ingesting strong acidic or basic caustic chemicals. Activated charcoal is also of unproven value in patients ingesting irritant chemicals, where it may obscure endoscopic findings when the procedure is justified. 2) ACTIVATED CHARCOAL: Administer charcoal as a slurry (240 mL water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents, 25 to 50 g in children (1 to 12 years), and 1 g/kg in infants less than 1 year old. C) DILUTION - 1) Immediate dilution with milk or water may be of benefit in caustic or irritant chemical ingestions. 2) DILUTION: Immediately dilute with 4 to 8 ounces (120 to 240 mL) of water or milk (not to exceed 4 ounces/120 mL in a child). D) IRRITATION - 1) Observe patients with ingestion carefully for the possible development of esophageal or gastrointestinal tract irritation or burns. If signs or symptoms of esophageal irritation or burns are present, consider endoscopy to determine the extent of injury. E) OBSERVATION CRITERIA - 1) Carefully observe patients with ingestion exposure for the development of any systemic signs or symptoms and administer symptomatic treatment as necessary. 2) Patients symptomatic following exposure should be observed in a controlled setting until all signs and symptoms have fully resolved. 0.4.3 INHALATION EXPOSURE A) DECONTAMINATION - 1) INHALATION: Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with inhaled beta2 agonist and oral or parenteral corticosteroids. B) IRRITATION - 1) Respiratory tract irritation, if severe, can progress to pulmonary edema which may be delayed in onset up to 24 to 72 hours after exposure in some cases. C) ACUTE LUNG INJURY - 1) ACUTE LUNG INJURY: Maintain ventilation and oxygenation and evaluate with frequent arterial blood gas or pulse oximetry monitoring. Early use of PEEP and mechanical ventilation may be needed. D) BRONCHOSPASM - 1) If bronchospasm and wheezing occur, consider treatment with inhaled sympathomimetic agents. E) OBSERVATION CRITERIA - 1) Carefully observe patients with inhalation exposure for the development of any systemic signs or symptoms and administer symptomatic treatment as necessary. 2) Patients symptomatic following exposure should be observed in a controlled setting until all signs and symptoms have fully resolved. 0.4.4 EYE EXPOSURE A) DECONTAMINATION: Irrigate exposed eyes with copious amounts of room temperature water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility. 0.4.5 DERMAL EXPOSURE A) OVERVIEW 1) DERMAL DECONTAMINATION - a) DECONTAMINATION: Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician may need to examine the area if irritation or pain persists. 2) PESTICIDES - a) DECONTAMINATION: Remove contaminated clothing and jewelry. Wash the skin, including hair and nails, vigorously; do repeated soap washings. Discard contaminated clothing. 3) IRRITATION - a) Treat dermal irritation or burns with standard topical therapy. Patients developing dermal hypersensitivity reactions may require treatment with systemic or topical corticosteroids or antihistamines. 4) DERMAL ABSORPTION - a) Some chemicals can produce systemic poisoning by absorption through intact skin. Carefully observe patients with dermal exposure for the development of any systemic signs or symptoms and administer symptomatic treatment as necessary. Range of Toxicity:

A) No specific range of toxicity can be established for the broad field of chemicals in general. [Rumack BH POISINDEX(R) Information System Micromedex, Inc., Englewood, CO, 2004; CCIS Volume 122, edition expires Nov, 2004. Hall AH & Rumack BH (Eds): TOMES(R) Information System Micromedex, Inc., Englewood, CO, 2004; CCIS Volume 122, edition expires Nov, 2004.]**PEER REVIEWED**

Animal Toxicity Studies:

Non-Human Toxicity Excerpts:

EFFECTS OF POLYBUTENE EMULSION ON THE COMPOSITION OF PEPPERMINT OILS WAS STUDIED. TREATMENT CAUSED PREMATURE AGING OF LEAVES AND THE QUANTITATIVE COMPOSITION OF THE OILS HAD ALTERED RELATIVE TO CONTROLS, RESULTING IN LOW QUALITY OIL. [BRIGGS CJ; PLANTA MED 24 (2): 120 (1973)]**PEER REVIEWED**

The subacute inhalation toxicity of polybutene was studied in rats. Male Wistar rats were exposed to polybutene at concn ranges of 65 to 72 or 692 to 743 mg/cu m, 7 hr/day, 5 days/wk for 2 wk. The rats were observed for clinical signs of toxicity. They were killed, weighed, and necropsied after 2 wk. Three of four rats exposed to the high concentration of polybutene died. Lung weights were significantly increased in all high exposure groups. All high dose rats had significantly increased liver weights. Heart, kidney, and testes weights were increased in rats exposed to high concentrations of the alkylbenzenes. The major pathological finding was an increase in numbers of alveolar macrophages and increased macrophage vacuolation in the lungs of rats exposed to concentrations of polybutene. A slight hepatic fatty degeneration was seen in rats exposed to the high concentration of polybutene. Two weeks later the concentration averaged 2831 ug/g. /It was/ concluded that inhalation exposure to polybutene causes toxic effects in the lungs. [Skyberg K et al; Environ Res 53 (1): 48-61 (1990)]**PEER REVIEWED**

Metabolism/Pharmacokinetics:

Pharmacology:

Environmental Fate & Exposure:

Environmental Standards & Regulations:

FIFRA Requirements:

As the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their future use. Under this pesticide reregistration program, EPA examines health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether they are eligible for reregistration. In addition, all pesticides must meet the new safety standard of the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA, as amended in 1988, were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern and List D pesticides of less concern. Polybutene is found on List D. Case No: 4076; Pesticide type: Rodenticide (Bird Repellent); Case Status: RED Approved 12/94; OPP has made a decision that some/all uses of the pesticide are eligible for reregistration, as reflected in a Reregistration Eligibility Decision (RED) document.; Active ingredient (AI): Polybutene; Data Call-in (DCI) Date(s): 07/06/93; AI Status: OPP has completed a Reregistration Eligibility Decision (RED) document for the case/AI. [USEPA/OPP; Status of Pesticides in Registration, Reregistration and Special Review p.332 (Spring, 1998) EPA 738-R-98-002]**QC REVIEWED**

Polybutenes are exempt from the requirement of a tolerance for residues in or on the raw agricultural commodity cottonseed when used as sticker agent for formulations of the attractant gossyplure (1:1 mixture of (Z,Z)- and (Z,E)- 7,11-hexadecadien -1-ol acetate) to disrupt the mating of the pink bollworm. [40 CFR 180.1037(a) (4/1/92)]**PEER REVIEWED**

Polybutenes are exempt from the requirement of a tolerance for residues in or on the raw agricultural commodity artichokes when used as a sticker agent in multi-layered laminated controlled-release dispensers of (Z)- 11 hexadecenal to disrupt the mating of the artichoke plume moth. [40 CFR 180.1037(b) (4/1/92)]**PEER REVIEWED**

Atmospheric Standards:

This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Polybutene is produced, as an intermediate or a final product, by process units covered under this subpart. [40 CFR 60.489 (7/1/92)]**PEER REVIEWED**

FDA Requirements:

Polybutene, hydrogenated is an indirect food additive for use as a component of adhesives. [21 CFR 175.105 (4/1/93)]**PEER REVIEWED**

Allowable Tolerances:

Polybutenes are exempt from the requirement of a tolerance for residues in or on the raw agricultural commodity cottonseed when used as sticker agent for formulations of the attractant gossyplure (1:1 mixture of (Z,Z)- and (Z,E)-7,11-hexadecadien-1-ol acetate) to disrupt the mating of the pink bollworm. [40 CFR 180.1037(a) (4/1/92)]**PEER REVIEWED**

Polybutenes are exempt from the requirement of a tolerance for residues in or on the raw agricultural commodity artichokes when used as a sticker agent in multi-layered laminated controlled-release dispensers of (Z)- 11 hexadecenal to disrupt the mating of the artichoke plume moth. [40 CFR 180.1037(b) (4/1/92)]**PEER REVIEWED**

Chemical/Physical Properties:

Molecular Formula:

(C4-H8)X- **PEER REVIEWED**

Other Chemical/Physical Properties:

BEGINS TO DECOMPOSE @ ABOUT 350 DEG C & MONOMER IS ALMOST COMPLETELY REGENERATED [Lefaux, R. Practical Toxicology of Plastics. Cleveland: CRC Press Inc., 1968. 56]**PEER REVIEWED**

Chemical Safety & Handling:

Flash Point:

215-470 deg F (open cup) [U.S. Coast Guard, Department of Transportation. CHRIS - Hazardous Chemical Data. Volume II. Washington, D.C.: U.S. Government Printing Office, 1984-5.]**PEER REVIEWED**

Fire Fighting Procedures:

Carbon dioxide, dry chemical, or foam. Water may be ineffective. [U.S. Coast Guard, Department of Transportation. CHRIS - Hazardous Chemical Data. Volume II. Washington, D.C.: U.S. Government Printing Office, 1984-5.]**PEER REVIEWED**

Protective Equipment & Clothing:

Goggles or face shield. [U.S. Coast Guard, Department of Transportation. CHRIS - Hazardous Chemical Data. Volume II. Washington, D.C.: U.S. Government Printing Office, 1984-5.]**PEER REVIEWED**

Disposal Methods:

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices. **PEER REVIEWED** Occupational Exposure Standards:

Manufacturing/Use Information:

Major Uses:

Lubricating-oil additive; hot-melt adhesives; sealing tapes; special sealants; cable insulation; polymer modifier; viscosity index improvers; films and coatings [Sax, N.I. and R.J. Lewis, Sr. (eds.). Hawley's Condensed Chemical Dictionary. 11th ed. New York: Van Nostrand Reinhold Co., 1987. 933]**PEER REVIEWED**

CHEM INT FOR MOTOR OIL DISPERSANTS; COMPONENT OF AGRICULTURAL PRODUCTS, INKS & INDUST GREASES (1000-1500 MOL WT) [SRI]**PEER REVIEWED**

GASOLINE & LUBRICANT ADDITIVE (300-500, 1000-1500 MOL WT) [SRI]**PEER REVIEWED**

PLASTICIZER FOR POLYOLEFINS & ELASTOMERS (1000-1500 MOL WT) [SRI]**PEER REVIEWED**

ADDITIVE FOR FUNCTIONAL FLUIDS & DIELECTRIC OILS (300-500 MOL WT) [SRI]**PEER REVIEWED**

COMPONENT OF ADHESIVES, CAULKS, SEALANTS, LEATHER & PAPER COATINGS (1500-3000 MOL WT) [SRI]**PEER REVIEWED**

Insulating oil for medium- and high-voltage underground power cables [Gerhartz, W. (exec ed.). Ullmann's Encyclopedia of Industrial Chemistry. 5th ed.Vol A1: Deerfield Beach, FL: VCH Publishers, 1985 to Present.,p. VA15 476]**PEER REVIEWED**

Construction material for...high temperature pressure pipes, filter pressure plates, strip wound vessels, and pumps [Gerhartz, W. (exec ed.). Ullmann's Encyclopedia of Industrial Chemistry. 5th ed.Vol A1: Deerfield Beach, FL: VCH Publishers, 1985 to Present.,p. VB1 7-37]**PEER REVIEWED**

Insulation jackets for wires, cable sleeves, pipes [Gerhartz, W. (exec ed.). Ullmann's Encyclopedia of Industrial Chemistry. 5th ed.Vol A1: Deerfield Beach, FL: VCH Publishers, 1985 to Present.,p. VA14 347]**PEER REVIEWED** Ingredient for skin and hair conditioning cosmetics [Kirk-Othmer Encyclopedia of Chemical Technology. 4th ed. Volumes 1: New York, NY. John Wiley and Sons, 1991-Present.,p. V7 585]**PEER REVIEWED**

...adhesives, caulks, sealants, and glazing compounds...plasticizers in rubber formulations with butyl rubber, SBR, and natural rubbers. [Kirk-Othmer Encyclopedia of Chemical Technology. 4th ed. Volumes 1: New York, NY. John Wiley and Sons, 1991-Present.,p. V8 951]**PEER REVIEWED**

In linear low density polyethylene (LLDPC) blends /polybutenes/ induce cling to stretch wrap films [Kirk-Othmer Encyclopedia of Chemical Technology. 4th ed. Volumes 1: New York, NY. John Wiley and Sons, 1991-Present.,p. V8 951]**PEER REVIEWED**

Widely employed in lubricants and dispersants...when modified...with polar functionality [Kirk-Othmer Encyclopedia of Chemical Technology. 4th ed. Volumes 1: New York, NY. John Wiley and Sons, 1991-Present.,p. V8 951]**PEER REVIEWED**

Plasticizer in hot-melt adhesives [Kirk-Othmer Encyclopedia of Chemical Technology. 4th ed. Volumes 1: New York, NY. John Wiley and Sons, 1991-Present.,p. V1 461]**PEER REVIEWED**

Manufacturers:

Amoco Corporation, Hq, 200 East Randolph Drive, Chicago, IL 60601, (312) 856-6111; Subsidiary: Amoco Chemical Company (address same as Hq), (312) 856-3200; Chemical & Specialty Product Group; Production sites: Texas City, TX 77592-0568; Whiting, IN 46394-2191 [SRI. 1994 Directory of Chemical Producers -United States of America. Menlo Park, CA: SRI International, 1994.. 864]**PEER REVIEWED**

Exxon Corp, Hq, 1251 Avenue of the Americas, New York, NY 10020, (212) 333-1000; Exxon Chemical Co, division; Exxon Chemical Americas, PO Box 3272, Houston, TX 77253-3272; Production sites: Baytown, TX 77520; Linden, NJ 07036 [SRI. 1994 Directory of Chemical Producers -United States of America. Menlo Park, CA: SRI International, 1994.. 864]**PEER REVIEWED**

The Lubrizol Corp, Hq, 29400 Lakeland Blvd, Wickliffe, OH 44092, (216) 943-4200; Production site: Deer Park, TX 77536 [SRI. 1994 Directory of Chemical Producers -United States of America. Menlo Park, CA: SRI International, 1994.. 864]**PEER REVIEWED**

Methods of Manufacturing: LOW-TEMPERATURE FRIEDEL-CRAFTS POLYMERIZATION (WITH ALUMINUM CHLORIDE CATALYST) OF DRIED, DESULFURIZED BUTANE/BUTYLENE REFINERY STREAMS OBTAINED FROM CRACKING OPERATIONS, MOL WT RANGE OF PRODUCT IS USUALLY 300-3,000 [SRI]**PEER REVIEWED**

General Manufacturing Information:

SPRAY APPLICATION OF INDOPOL POLYBUTENE, CONTROLLED THE TWO- SPOTTED SPIDER MITE ON EUONYMUS JAPONICA PLANTS IN A GREENHOUSE STUDY. [THOMPSON HE, GULDNER CD JR; J ECON ENTOMOL 66 (4): 997 (1973)]**PEER REVIEWED**

Liquid or solid Bronsted and Lewis acids...induce polymerization...by forming carbenium ions. Molecular mass is dependent on many reaction variables, especially temperature: increasing temperature generally results in lower molecular masses [Gerhartz, W. (exec ed.). Ullmann's Encyclopedia of Industrial Chemistry. 5th ed.Vol A1: Deerfield Beach, FL: VCH Publishers, 1985 to Present.,p. VA4 485]**PEER REVIEWED**

Consumption Patterns:

CHEM INT FOR AUTOMOTIVE MOTOR OIL DISPERSANTS, 77%; COMPONENT OF ADHESIVES, CAULKS, SEALANTS & SPECIALTY COATINGS, 12%; GASOLINE ADDITIVE, 5%; ADDITIVE FOR FUNCTIONAL FLUIDS, DIELECTRIC OILS & SPECIALTY LUBRICANTS, 4%; PLASTICIZER & OTHER, 2% (1978 EST) [SRI]**PEER REVIEWED**

Lube oil additives and specialty lubes, 68%; caulking and sealant compounds, 9%; industrial lubes, 8%; electrical 5%; adhesives, 3%; exports and misc, 7% (1984) [CHEMICAL PROFILE: POLYBUTENES, 1984]**PEER REVIEWED**

(1984) 2.46X10+11 g /Demand/ [CHEMICAL PROFILE: POLYBUTENES, 1984]**PEER REVIEWED**

CHEMICAL PROFILE: Polybutenes. Lube oil additives and specialty lubricants, 60%; caulking and sealing compounds, 11%; electrical applications, 7%; industrial lubricants, 6%; adhesives, 6%; exports, 5%; miscellaneous, 5%. [Kavaler AR; Chemical Marketing Reporter 231 (23): 54 (1987)]**PEER REVIEWED** CHEMICAL PROFILE: Polybutenes. Demand: 1986: 500 million lb; 1987: 512 million lb; 1991 /projected/: 590 million lb. [Kavaler AR; Chemical Marketing Reporter 231 (23): 54 (1987)]**PEER REVIEWED**

Demand: 1989: 640 million pounds; 1990: 655 million pounds; 1994: 725 million pounds [Chemical Profile: Polybutenes. April 9, 1990]**PEER REVIEWED**

Gasoline and lube oil additives, 65%; caulking and sealing compounds, 11%; adhesives, 8%; electrical applications, 5%; industrial lubricants, 4%; exports, 5%; miscellaneous, 2% [Chemical Profile: Polybutenes. April 9, 1990]**PEER REVIEWED**

U. S. Production:

(1977) 9.35X10+10 GRAMS (SALES) [SRI]**PEER REVIEWED**

(1978) 2.11X10+11 GRAMS (EST CONSUMPTION) [SRI]**PEER REVIEWED**

1994: 850 million pounds (capacity) [SRI. 1994 Directory of Chemical Producers -United States of America. Menlo Park, CA: SRI International, 1994.. 864]**PEER REVIEWED**

1990: 781 million pounds (capacity) [Chemical Profile: Polybutenes (1990)]**PEER REVIEWED**

(1992) ND [United States International Trade Commission. Synthetic Organic Chemicals - United States Production and Sales, 1992. USITC Publication 2720, Feb. 1994 Washington, D.C.: United States Trade Commission, 1994.p. 3-296]**PEER REVIEWED**

U. S. Imports:

Negligible [Chemical Profile: Polybutenes (1990)]**PEER REVIEWED**

U. S. Exports:

5% [Chemical Profile: Polybutenes (1990)]**PEER REVIEWED** Laboratory Methods:

Analytic Laboratory Methods:

TLC METHOD FOR DETECTING POLYBUTENE CONTAMINATION IN VOLATILE OILS. [BRIGGS CJ, MCLAUGHLIN LD; J CHROMATOGR; 101 (2): 403 (1974)]**PEER REVIEWED**

Special References:

Synonyms and Identifiers:

Synonyms:

H 100 **PEER REVIEWED**

L 14 **PEER REVIEWED**

L 100 **PEER REVIEWED**

15H **PEER REVIEWED**

2000H **PEER REVIEWED**

300H **PEER REVIEWED** AMOCO H 300 **PEER REVIEWED**

AMOCO 15H **PEER REVIEWED**

BUTENE, HOMOPOLYMER **PEER REVIEWED**

BUTENE POLYMER **PEER REVIEWED**

BUTENE, POLYMERS **PEER REVIEWED**

CHEVRON 6 **PEER REVIEWED**

HE 1975 **PEER REVIEWED**

HE 375 **PEER REVIEWED**

HV-1900 **PEER REVIEWED**

HYVIS 10 **PEER REVIEWED**

HYVIS 7000/45 **PEER REVIEWED**

INDOPOL **PEER REVIEWED** INDOPOL H 50 **PEER REVIEWED**

INDOPOL H 100 **PEER REVIEWED**

INDOPOL H 300 **PEER REVIEWED**

INDOPOL L 10 **PEER REVIEWED**

LV 50 **PEER REVIEWED**

OKTOL 600 **PEER REVIEWED**

ORONITE 6 **PEER REVIEWED**

PB 2110 **PEER REVIEWED**

PETROFIN 100 **PEER REVIEWED**

POLYBUDEN 300H **PEER REVIEWED**

POLYBUTENE SH 015 **PEER REVIEWED**

POLYBUTYLENE **PEER REVIEWED**

L 14 [POLYMER] **PEER REVIEWED**

POLYVIS 015SH **PEER REVIEWED**

POLYVIS 2000CH **PEER REVIEWED**

POLYVIS OO **PEER REVIEWED**

SH 015 **PEER REVIEWED**

SV 7000 **PEER REVIEWED**

WITRON 131 **PEER REVIEWED**

Administrative Information:

Hazardous Substances Databank Number: 5158

Last Revision Date: 20030214

Last Review Date: Reviewed by SRP on 9/29/1994

Update History:

Complete Update on 02/14/2003, 1 field added/edited/deleted. Complete Update on 11/08/2002, 1 field added/edited/deleted. Complete Update on 08/06/2002, 1 field added/edited/deleted. Complete Update on 01/14/2002, 1 field added/edited/deleted. Complete Update on 08/09/2001, 1 field added/edited/deleted. Complete Update on 05/15/2001, 1 field added/edited/deleted. Complete Update on 06/12/2000, 1 field added/edited/deleted. Complete Update on 03/13/2000, 1 field added/edited/deleted. Complete Update on 02/08/2000, 1 field added/edited/deleted. Complete Update on 02/02/2000, 1 field added/edited/deleted. Complete Update on 09/21/1999, 1 field added/edited/deleted. Complete Update on 08/27/1999, 1 field added/edited/deleted. Complete Update on 06/02/1998, 1 field added/edited/deleted. Complete Update on 03/08/1998, 1 field added/edited/deleted. Complete Update on 11/01/1997, 1 field added/edited/deleted. Complete Update on 01/30/1997, 1 field added/edited/deleted. Complete Update on 05/13/1996, 1 field added/edited/deleted. Complete Update on 01/28/1996, 1 field added/edited/deleted. Complete Update on 04/25/1995, 1 field added/edited/deleted. Complete Update on 01/12/1995, 25 fields added/edited/deleted. Field Update on 01/04/1995, 1 field added/edited/deleted. Complete Update on 04/04/1994, 1 field added/edited/deleted. Field update on 01/04/1993, 1 field added/edited/deleted. Complete Update on 10/10/1990, 1 field added/edited/deleted. Complete Update on 05/04/1990, 1 field added/edited/deleted. Complete Update on 04/22/1988, 3 fields added/edited/deleted.