Please Note: Separate Order Form Required for Each Door Set

SF75C ORDER FORM V.04.2015 PLEASE NOTE: SEPARATE ORDER FORM REQUIRED FOR EACH DOOR SET EXPOSE COMPANY NAME: LOCATION SHELTERED VERY EXPOSED D Within 5000 Address: metres of coast/tidal estuary or YES NO Post Code: near a swimming Delivery Address if different to pool above: Only complete the 2 sections Post Code: below if YES has been selected above Marine Finish YES NO Required Distance From Metres Swimming Pool Coast PANELS INSIDE / OUTSIDE STACKING NO. PANELS LEFT (viewed from inside) NO. PANELS RIGHT (viewed from inside) MANUFACTURI TEL No. NG WIDTH mm MANUFACTURI FAX No. NG HEIGHT mm POSITION Sunflex Quote No. REFERENCE YOUR REF / PO No. Eg. Kitchen Extention COLOUR AND Circle / Delete as Required TIMBER TYPE Special RAL Colour – Inside Stain Ref: Ref: Outside White RAL Aluminium RAL Anthracite Grey RAL Grey Aluminium RAL Silver Anodised -standard 9016 9006 7016 9007 (all standard colours are semi-gloss – any other gloss level would be a special ) - Outside Special RAL Ref: Gloss Level Matt Semi-Gloss (special) Timber Type Meranti Pine Oak (Inside) Timber Profile Moulded Plain Square (Inside) Handle Colour Black RAL 9011 Standard Silvery Grey Stainless Steel Special RAL Ref: (inside) Handle Colour Black RAL 9011 Colour as System Stainless Steel Standard Silvery (outside) grey Hinge Colour Black RAL 9011 White RAL 9016 Stainless Steel Special RAL Ref: (inside) Hinge Colour Black RAL 9011 Colour as System Stainless Steel (outside) Please note: changes to your order made after the order is placed may incur additional cost and increase the lead time. SF75C ORDER FORM V.04.2015 HANDLE AND KEY LOCK POSITIONS Locking style □ Vertical handle and no □ Latch lock with horizontal handle (odd No. configurations latch only) Handle Height mm (standard height 1050mm from underside of door if Non-Standard panel) Handles to Lead Inside Only / Both Sides Key Lock Inside Only / Both Sides Panel No.______Intermediate Keyed alike with additional sets YES NO key locks only on even configurations with no single door Only complete the next line below if you have a French door arrangement EG. 1/1, 3/1, 3/3, 5,1 or 7,1 5/3 etc. Master Door Left Right Handles to Slave Panel (No Inside Both Sides Viewed From Key Lock) Only Inside GLAZING Tick Option Required (System Supplied Glazed) Glazed with □ Glass Spec. Req.: 4mm Soft Coat x 18mm Argon x 4mm Soft Coat x 18mm Argon x 4mm 48mm sealed Toughened units Warm Edge Spacer Bar Colour: Black / White / Grey (centre pane 0.5 & overall U- Value = 0.9 W/m²) Unglazed ready □ Glass sizes will follow for 48mm units TRACK TYPE AND ACCESSORIES Bottom Track Weathered (same colour as external door Flush Track Silver Flush Track Bronze Type colour) Anodised Anodised Only the weathered track offers full weather protection Panel Catch Type will be black PVC or NA for even configurations and single doors not latching on to another panel Pull Handle Black White Colour (outward opening sets only) Trickle Vent YES / NO Size: 2500mm / 5000mm airflow No. Required: T.Vent Colour White RAL 9016 Black RAL 9011 Standard Silver Special RAL Ref Inside T.Vent Colour White RAL 9016 Black RAL 9011 Standard Silver Colour as System Outside Aluminium Sill Section (colour matched YES / NO Length: mm to external door colour) Aluminium Sill 190x25m 85x25mm 150x25mm Size m Special Requirements: CAD Drawing Req. YES / NO Ordered By: (name) (position) By signing this document I confirm the above information is correct and I accept full responsibility for any inaccuracies. Furthermore, I am in receipt of Sunflex UK’s current terms and conditions of trading. Signature Date

Please note: changes to your order made after the order is placed may incur additional cost and increase the lead time.