(1-U-P) 1 Component Urethane Primer / Sealer

DESCRIPTION

SpecTech 1-U-P is a single COVERAGE Any material contacting the skin component moisture cured 300-400 sq. ft. per gallon per mil should be neutralized by polyurethane. (37.2 m² / L / .02 mm). Coverage washing with generous on rough or porous surfaces may quantities of water. Spray USAGE be as low as 100 sq. ft. per application can lead to inhalation Intended for use as a sealer to gallon (9.3 m² / L / .02 mm) and of particulate matter; be applied directly to concrete, on smooth surfaces up to 400 consequently, a respirator is wood, aluminum and epoxy sq. ft. per gallon (37.2 m² / L / . required for spray application. primer. It is also suitable for use 02 mm). ADHESION as a tie coat over weathered SOLIDS polymeric application of Excellent adhesion to metals, SpecTech coating systems.  Weight: 22.6% wood, concrete, masonry and most coating and plastic CONSISTENCY  Volume: 29.5% materials. 30 to 50 cps. FLASH POINT CLEANER COLOR  ASTM D-56  22°F (-6°C) T.C.C. Clean equipment with Xylol Transparent amber-brown. thinner and cleaner. FLAMMABILITY APPLIED PRODUCT DATA APPLICATION The dry film will support Apply a uniform wet coat using a HARDNESS combustion unless applied to a non-flammable substrate. Fire medium nap roller. Do not Forms a tough, resilient , rated systems (ASTM E-108 or puddle. 1-U-P can be sprayed abrasion-resistant film. UL 790) are not affected when using conventional equipment WATER VAPOR specified amount of coatings are but the applicator must take PERMEABILITIY applied over GacoFlex U-5677. precautions against inhalation of particulate matter. Use of a Cures to form a solvent vapor STORAGE STABILITY proper respirator is necessary. resistant film. One year in original unopened Do not heat 1-U-P before or WEATHERABILITY containers. Material may gel if during spray application. not kept tightly sealed or if Additional coats may be applied Poor. Do not expose to strong exposed to moisture. Normally, as soon as the previous coat is sunlight for more than two containers should be used up on firm, and preferably, within eight weeks. a job or within one week after hours. After 24 hours inter-coat CHEMICAL RESISTANCE originally opened. adhesion can be poor. Good solvent, acid, alkali and TOXICITY salt resistance. Does not have Contains solvents which require inhibitive properties. ventilation during application. V.O.C. Contains less than 2% polymeric isocyanate which may be 97.4 grams per liter / .81.25 lbs irritating to the skin and is toxic if per gallonPACKAGED inhaled as particulate matter. PRODUCT DATA

This information and technical advice provided herein are believed to be reliable and accurate to the best knowledge of SPEC Technologies Ilc. as based on tests and should serve only as recommendation. As the seller, SPEC Technologies Ilc. makes no representation or warranties of any kind, expressed, implied or statutory, including but not limited to all implied warranties of merchantability or fitness for use or a particular purpose for the product. SPEC Technologies Ilc. makes no representations or warranties as to the result of the use of the product and assumes no obligation or liability in the connection therewith. SPEC Technologies Ilc. is not liable for any incidental or consequential damages of any sort from the use of this product. The information provided herein is subject to change ant any time without notice. Information changes may include, but are not limited to, commercial and technical changes, changes in pricing, Physical characteristics and packaging.