SECTION 10 31 00 MANUFACTURED GAS FIREPLACES

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2016 - 2016 ARCAT, Inc. - All rights reserved

1 GENERAL

1.1 SECTION INCLUDES

1.1.1 Manufactured indoor vented gas fireplace systems and accessories.

1.1.2 Manufactured indoor unvented gas fireplace systems and accessories.

1.1.3 Manufactured outdoor vent-free gas fireplace systems and accessories.

1.1.4 Simulated log fire kits.

1.2 RELATED SECTIONS

1.2.1 Section 06 10 00 - Rough Carpentry.

1.2.2 Section - .

1.2.3 Section 22 14 13 - Facility Storm Drainage Piping.

1.2.4 Section 26 05 00 - Common Work Results for Electrical.

1.3 REFERENCES

1.3.1 National Fire Protection Association (NFPA) - NFPA 54 National Fuel Gas Code.

1.3.2 American National Standards Institute (ANSI): 1.3.2.1 ANSI Z223.1 - National Fuel Gas Code. 1.3.2.2 ANSI Z21.50 - Vented Gas Fireplaces. 1.3.2.3 ANSI Z21.88 - Vented Gas Fireplace Heaters. 1.3.2.4 ANSI Z21.91 - Ventless Firebox Enclosures for Gas-Fired Unvented Decorative 10 31 00-1 Room Heaters. 1.3.2.5 ANSI Z21.97 - Outdoor Decorative Gas Appliances. 1.3.2.6 ANSI Z21.11.2 - Gas-Fired Room Heaters, Volume II, Unvented Room Heaters.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Manufacturer's data sheets on each product to be used, including: 1.4.2.1 Preparation instructions and recommendations. 1.4.2.2 Storage and handling requirements and recommendations. 1.4.2.3 Installation methods.

1.4.3 Shop Drawings: Provide drawing of required clearances, rough-in of enclosure and utilities.

1.5 QUALITY ASSURANCE

1.5.1 Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.

1.5.2 Installer Qualifications: Minimum 2 year experience installing similar products.

1.5.3 Multiple Installation Mock-Up: Provide a mock-up for evaluation of site and framing preparation techniques and installation workmanship. 1.5.3.1 Provide representative fireplace in area designated by Architect. 1.5.3.2 Do not proceed with remaining units until workmanship, installation and operation are approved by Architect. 1.5.3.3 Remodel mock-up unit as required to produce acceptable work.

1.6 DELIVERY, STORAGE, AND HANDLING

1.6.1 Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations.

1.6.2 Store materials within absolute limits for temperature and humidity recommended by manufacturer. Protect from damage.

1.7 PROJECT CONDITIONS

1.7.1 Environmental Limitations: Do not deliver or install units until spaces are enclosed and weather tight, wet work in spaces is complete and dry.

1.7.2

10 31 00-2 Field Measurements: Verify field measurements as indicated on Shop Drawings. Where measurements are not possible, provide control dimensions and templates. 1.7.2.1 Coordinate installation and location of blocking and supports as requested. 1.7.2.2 Verify openings, clearances, storage requirements and other dimensions relevant to the installation and final application.

1.8 SEQUENCING

1.8.1 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.8.2 Pre-Installation Meeting: Convene minimum two weeks prior to starting work of this section.

1.9 WARRANTY

1.9.1 Warranty for Gas Fireplaces and Inserts: Provide manufacturer's standard 20 year limited warranty against defects in materials and workmanship.

1.9.2 Warranty for Simulated Log Fire Kits: Provide manufacturer's standard 3 year limited warranty against defects in materials and workmanship.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Superior Fireplaces, which is located at: 1508 Elm Hill Pike; Nashville, TN 37210; Toll Free Tel: 800-655-2008; Tel: 615-925-3417; Fax: 615-365-3068; Email: [email protected]; Web: superiorfireplaces.us.com

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 MANUFACTURED INDOOR GAS FIREPLACES - MERIT BCT2536 SERIES

2.2.1 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.2.1.1 Model: BCT2536TMx full model number as indicated on Drawings, Merit BCT2536 Series as manufactured by Superior Fireplaces. 2.2.1.2 Model: BCT2536TMN Merit Series as manufactured by Superior Fireplaces. 2.2.1.2.1 Fuel Type: Natural gas. 2.2.1.3 Model: BCT2536TMP Merit Series as manufactured by Superior Fireplaces. 2.2.1.3.1 Fuel Type: Propane/LP.

10 31 00-3 2.2.1.4 Gas Control: Millivolt gas control, electricity not required to operate. 2.2.1.5 Pilot Ignition: Piezoelectric igniter, matches/lighter not required. 2.2.1.6 Remote Controls: Provide optional MRC remote control system with receiver, handheld on/off remote control and dual safety lock feature.

2.2.2 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.2.2.1 Model: BCT2536TEx full model number as indicated on Drawings, Merit BCT2536 Series as manufactured by Superior Fireplaces. 2.2.2.2 Model: BCT2536TEN Merit Series as manufactured by Superior Fireplaces. 2.2.2.2.1 Fuel Type: Natural gas. 2.2.2.3 Model: BCT2536TEP Merit Series as manufactured by Superior Fireplaces. 2.2.2.3.1 Fuel Type: Propane/LP. 2.2.2.4 Pilot Ignition: Electrode igniter, requires 120 VAC to operate, lights automatically when unit is turned on. 2.2.2.5 Remote Controls: Provide optional WRC on/off electronic remote control kit.

2.2.3 Fireplace Description: 2.2.3.1 Compliance: Tested and approved under ANSI Z21.50 and ANSI Z223.1/NFPA 54 for indoor applications. 2.2.3.2 Maximum Input Rating: 18,000 BTU/hr. 2.2.3.3 Description of Fire: Multi-tiered flame system with random yellow flames and glowing, simulated embers. 2.2.3.4 Exterior Finish: Rough texture powder coating, black. 2.2.3.5 Interior Finish: Factory applied black finish. 2.2.3.6 Log Grates: Come standard with units. 2.2.3.7 Wall Switches: Provide optional GWMS2 wall mounted on/off switch. 2.2.3.8 Electrical Connections: Factory wired dual access electrical J box. 2.2.3.9 Doors: Fixed tempered glass doors, standard with units. 2.2.3.10 Fire Screens: Mesh pull screens, standard with unit. 2.2.3.11 Perimeter Trim: Provide optional LTC36x louver trim kits, finish indicated on Drawings. 2.2.3.12 Perimeter Trim: Provide optional LTC36B rolled louver trim kits, brushed brass finish. 2.2.3.13 Perimeter Trim: Provide optional LTC36P rolled louver trim kits, platinum finish. 2.2.3.14 Equipment Shutoff Valves: Provide optional equipment shutoff valves with 1/8 inch (3.2 mm) NPT tap in lieu of test gauge connections. 10 31 00-4 2.2.3.15 Blowers: Provide optional blowers, with control knob adjustment. 2.2.3.16 Outside Air Kits: Provide optional Outside Air Kits as indicated on the Drawings. 2.2.3.17 Outside Air Kits: Provide optional AK4 Outside Air Kits (complete kit, collar, hood and 36 inches (914 mm) of flex tube).

2.2.4 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.2.4.1 Model: ______as manufactured by Superior Fireplaces. 2.2.4.2 Model: Series and model number as indicated on Drawings. 2.2.4.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.2.4.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.2.4.5 Accessories: Provide optional accessories as indicated on Drawings.

2.3 MANUFACTURED INDOOR GAS FIREPLACES - MERIT BRT2000 SERIES

2.3.1 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.3.1.1 Model: BRT2032TMN Merit Series as manufactured by Superior Fireplaces. 2.3.1.1.1 Burner: Single tube burner, 15,000 BTU/hr maximum input rating. 2.3.1.1.2 Interior: Black painted sides and back with white stacked brick pattern hearth. 2.3.1.1.3 Venting: B-vent, 4 inches (102 mm). 2.3.1.2 Model: BRT2332TMN Merit Series as manufactured by Superior Fireplaces. 2.3.1.2.1 Burner: Dual tube burner, 25,000 BTU/hr maximum input rating. 2.3.1.2.2 Interior: Black painted sides and back with white stacked brick pattern hearth. 2.3.1.2.3 Venting: B-vent, 5 inches (127 mm). 2.3.1.3 Model: BRT2532TMN Merit Series as manufactured by Superior Fireplaces. 2.3.1.3.1 Burner: Dual tube burner, 25,000 BTU/hr maximum input rating. 2.3.1.3.2 Interior: White stacked brick pattern refractory panel sides, back and hearth. 2.3.1.3.3 Venting: B-vent, 5 inches (127 mm). 2.3.1.4 Gas Control: Millivolt gas control, electricity not required to operate. 2.3.1.5 Pilot Ignition: Piezoelectric igniter, matches/lighter not required. 2.3.1.6 Remote Controls: Provide optional MRC remote control system with receiver, handheld on/off remote control and dual safety lock feature.

2.3.2 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.3.2.1 10 31 00-5 Model: BRT2032TEN Merit Series as manufactured by Superior Fireplaces. 2.3.2.1.1 Burner: Single tube burner, 15,000 BTU/hr maximum input rating. 2.3.2.1.2 Interior: Black painted sides and back with white stacked brick pattern hearth. 2.3.2.1.3 Venting: B-vent, 4 inches (102 mm). 2.3.2.2 Model: BRT2332TEN Merit Series as manufactured by Superior Fireplaces. 2.3.2.2.1 Burner: Dual tube burner, 25,000 BTU/hr maximum input rating. 2.3.2.2.2 Interior: Black painted sides and back with white stacked brick pattern hearth. 2.3.2.2.3 Venting: B-vent, 5 inches (127 mm). 2.3.2.3 Model: BRT2532TEN Merit Series as manufactured by Superior Fireplaces. 2.3.2.3.1 Burner: Dual tube burner, 25,000 BTU/hr maximum input rating. 2.3.2.3.2 Interior: White stacked brick pattern refractory panel sides, back and hearth. 2.3.2.3.3 Venting: B-vent, 5 inches (127 mm). 2.3.2.4 Pilot Ignition: Electrode igniter, requires 120 VAC to operate, lights automatically when unit is turned on. 2.3.2.5 Remote Controls: Provide optional WRC on/off electronic remote control kit.

2.3.3 Fireplace Description: 2.3.3.1 Fuel Type: As indicated on Drawings. 2.3.3.2 Fuel Type: Natural gas. 2.3.3.3 Fuel Type: Propane/LP. 2.3.3.4 Compliance: Tested and approved under ANSI Z21.50 and ANSI Z223.1/NFPA 54 for indoor applications. 2.3.3.5 Description of Fire: Yellow flames and simulated embers. 2.3.3.6 Exterior Finish: Rough texture powder coating, black. 2.3.3.7 Log Grates: Come standard with units. 2.3.3.8 Electrical Connections: Factory wired dual access electrical J box. 2.3.3.9 Fire Screens: Mesh pull screens. 2.3.3.10 Doors: Provide optional xxxxx glass doors, finish and model indicated on Drawings. 2.3.3.11 Doors: Provide optional BD32 fixed tempered glass doors, black finish. 2.3.3.12 Doors: Provide optional BD32B fixed tempered glass doors, brushed brass finish. 2.3.3.13 Doors: Provide optional BD32P fixed tempered glass doors, platinum finish. 2.3.3.14 Doors: Provide optional PT32 extruded aluminum bi-fold glass doors, black finish. 2.3.3.15 Doors: Provide optional PT32B extruded aluminum bi-fold glass doors, brushed 10 31 00-6 brass finish. 2.3.3.16 Doors: Provide optional PT32P extruded aluminum bi-fold glass doors, platinum finish. 2.3.3.17 Perimeter Trim: Provide optional perimeter trim, finish model indicated on Drawings. 2.3.3.18 Perimeter Trim: Provide optional PT32 perimeter trim, black finish. 2.3.3.19 Perimeter Trim: Provide optional PT32B perimeter trim, brushed brass finish. 2.3.3.20 Perimeter Trim: Provide optional PT32P perimeter trim, platinum finish. 2.3.3.21 Wall Switches: Provide optional GWMS2 wall mounted on/off switch. 2.3.3.22 Interior Liners: Provide optional BL32 brick liner kits. 2.3.3.23 Outside Air Kits: Provide optional Outside Air Kits as indicated on the Drawings. 2.3.3.24 Outside Air Kits: Provide optional AK4 Outside Air Kits (complete kit, collar, hood and 36 inches (914 mm) of flex tube).

2.3.4 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.3.4.1 Model: ______as manufactured by Superior Fireplaces. 2.3.4.2 Model: Series and model number as indicated on Drawings. 2.3.4.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.3.4.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.3.4.5 Accessories: Provide optional accessories as indicated on Drawings.

2.4 MANUFACTURED INDOOR GAS FIREPLACES - CUSTOM BRT4000 SERIES

2.4.1 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.4.1.1 Model: BRT4x36TMx full model number as indicated on Drawings, Custom BRT4000 Series as manufactured by Superior Fireplaces. 2.4.1.2 Model: BRT4036TMN Custom Series as manufactured by Superior Fireplaces. 2.4.1.2.1 Fuel Type: Natural gas. 2.4.1.2.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.1.3 Model: BRT4036TMP Custom Series as manufactured by Superior Fireplaces. 2.4.1.3.1 Fuel Type: Propane/LP. 2.4.1.3.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.1.4 Model: BRT4336TMN Custom Series as manufactured by Superior Fireplaces. 2.4.1.4.1 Fuel Type: Natural gas. 2.4.1.4.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 10 31 00-7 2.4.1.5 Model: BRT4336TMP Custom Series as manufactured by Superior Fireplaces. 2.4.1.5.1 Fuel Type: Propane/LP. 2.4.1.5.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 2.4.1.6 Model: BRT4536TMN Custom Series as manufactured by Superior Fireplaces. 2.4.1.6.1 Fuel Type: Natural gas. 2.4.1.6.2 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.1.7 Model: BRT4536TMP Custom Series as manufactured by Superior Fireplaces. 2.4.1.7.1 Fuel Type: Propane/LP. 2.4.1.7.2 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.1.8 Maximum Input Rating: 40,000 BTU/hr. 2.4.1.9 Gas Control: Millivolt gas control, electricity not required to operate. 2.4.1.10 Pilot Ignition: Piezoelectric igniter, matches/lighter not required. 2.4.1.11 Remote Controls: Provide optional MRC remote control system with receiver, handheld on/off remote control and dual safety lock feature.

2.4.2 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.4.2.1 Model: BRT4x42TMx full model number as indicated on Drawings, Custom BRT4000 Series as manufactured by Superior Fireplaces. 2.4.2.2 Model: BRT4042TMN Custom Series as manufactured by Superior Fireplaces. 2.4.2.2.1 Fuel Type: Natural gas. 2.4.2.2.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.2.3 Model: BRT4042TMP Custom Series as manufactured by Superior Fireplaces. 2.4.2.3.1 Fuel Type: Propane/LP. 2.4.2.3.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.2.4 Model: BRT4342TMN Custom Series as manufactured by Superior Fireplaces. 2.4.2.4.1 Fuel Type: Natural gas. 2.4.2.4.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 2.4.2.5 Model: BRT4342TMP Custom Series as manufactured by Superior Fireplaces. 2.4.2.5.1 Fuel Type: Propane/LP. 2.4.2.5.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 2.4.2.6 Model: BRT4542TMN Custom Series as manufactured by Superior Fireplaces. 2.4.2.6.1 Fuel Type: Natural gas. 2.4.2.6.2 10 31 00-8 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.2.7 Model: BRT4542TMP Custom Series as manufactured by Superior Fireplaces. 2.4.2.7.1 Fuel Type: Propane/LP. 2.4.2.7.2 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.2.8 Maximum Input Rating: 45,000 BTU/hr. 2.4.2.9 Gas Control: Millivolt gas control, electricity not required to operate. 2.4.2.10 Pilot Ignition: Piezoelectric igniter, matches/lighter not required. 2.4.2.11 Remote Controls: Provide optional MRC remote control system with receiver, handheld on/off remote control and dual safety lock feature.

2.4.3 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.4.3.1 Model: BRT4x36TEx full model number as indicated on Drawings, Custom BRT4000 Series as manufactured by Superior Fireplaces. 2.4.3.2 Model: BRT4036TEN Custom Series as manufactured by Superior Fireplaces. 2.4.3.2.1 Fuel Type: Natural gas. 2.4.3.2.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.3.3 Model: BRT4036TEP Custom Series as manufactured by Superior Fireplaces. 2.4.3.3.1 Fuel Type: Propane/LP. 2.4.3.3.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.3.4 Model: BRT4336TEN Custom Series as manufactured by Superior Fireplaces. 2.4.3.4.1 Fuel Type: Natural gas. 2.4.3.4.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 2.4.3.5 Model: BRT4336TEP Custom Series as manufactured by Superior Fireplaces. 2.4.3.5.1 Fuel Type: Propane/LP. 2.4.3.5.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 2.4.3.6 Model: BRT4536TEN Custom Series as manufactured by Superior Fireplaces. 2.4.3.6.1 Fuel Type: Natural gas. 2.4.3.6.2 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.3.7 Model: BRT4536TEP Custom Series as manufactured by Superior Fireplaces. 2.4.3.7.1 Fuel Type: Propane/LP. 2.4.3.7.2 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.3.8 Maximum Input Rating: 40,000 BTU/hr. 2.4.3.9 Pilot Ignition: Electrode igniter, requires 120 VAC to operate, lights automatically 10 31 00-9 when unit is turned on. 2.4.3.10 Remote Controls: Provide optional WRC on/off electronic remote control kit.

2.4.4 B-Vent Gas Fireplace Systems: Traditional, front view style. 2.4.4.1 Model: BRT4x42TEx full model number as indicated on Drawings, Custom BRT4000 Series as manufactured by Superior Fireplaces. 2.4.4.2 Model: BRT4042TEN Custom Series as manufactured by Superior Fireplaces. 2.4.4.2.1 Fuel Type: Natural gas. 2.4.4.2.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.4.3 Model: BRT4042TEP Custom Series as manufactured by Superior Fireplaces. 2.4.4.3.1 Fuel Type: Propane/LP. 2.4.4.3.2 Interior Finish: Black interior, red stacked brick pattern hearth. 2.4.4.4 Model: BRT4342TEN Custom Series as manufactured by Superior Fireplaces. 2.4.4.4.1 Fuel Type: Natural gas. 2.4.4.4.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 2.4.4.5 Model: BRT4342TEP Custom Series as manufactured by Superior Fireplaces. 2.4.4.5.1 Fuel Type: Propane/LP. 2.4.4.5.2 Interior Finish: Red stacked brick pattern on back, sides and hearth. 2.4.4.6 Model: BRT4542TEN Custom Series as manufactured by Superior Fireplaces. 2.4.4.6.1 Fuel Type: Natural gas. 2.4.4.6.2 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.4.7 Model: BRT4542TEP Custom Series as manufactured by Superior Fireplaces. 2.4.4.7.1 Fuel Type: Propane/LP. 2.4.4.7.2 Interior Finish: Red herringbone brick pattern on back, sides and hearth. 2.4.4.8 Maximum Input Rating: 40,000 BTU/hr. 2.4.4.9 Pilot Ignition: Electrode igniter, requires 120 VAC to operate, lights automatically when unit is turned on. 2.4.4.10 Remote Controls: Provide optional WRC on/off electronic remote control kit.

2.4.5 Fireplace Description: Traditional, front view style. 2.4.5.1 Compliance: Tested and approved under ANSI Z21.50 and ANSI Z223.1/NFPA 54 for indoor applications. 2.4.5.2 Description of Fire: Yellow flames and glowing, simulated embers. 2.4.5.3 Mounting: Flush face design. 10 31 00-10 2.4.5.4 Venting: B-vent, 6 inches (152 mm). 2.4.5.5 Exterior Finish: Powder coating, black. 2.4.5.6 Gas Controls: Concealed, with damper safety switch. 2.4.5.7 Log Grates: Come standard with units. 2.4.5.8 Electrical Connections: Factory wired dual access electrical J box. 2.4.5.9 Fire Screens: Mesh screens, retract into concealed screen pockets. 2.4.5.10 Doors: Provide optional fixed tempered glass doors, finish as indicated on Drawings. 2.4.5.11 Doors: Provide optional fixed tempered glass doors, black finish. 2.4.5.12 Doors: Provide optional fixed tempered glass doors, brushed brass finish. 2.4.5.13 Doors: Provide optional fixed tempered glass doors, platinum finish. 2.4.5.14 Doors: Provide optional extruded aluminum bi-fold glass doors, black finish. 2.4.5.15 Doors: Provide optional extruded aluminum bi-fold glass doors, brushed brass finish. 2.4.5.16 Doors: Provide optional extruded aluminum bi-fold glass doors, platinum finish. 2.4.5.17 Perimeter Trim: Provide optional perimeter trim, finish as indicated on Drawings. 2.4.5.18 Perimeter Trim: Provide optional perimeter trim, black finish. 2.4.5.19 Perimeter Trim: Provide optional perimeter trim, brushed brass finish. 2.4.5.20 Perimeter Trim: Provide optional perimeter trim, platinum finish. 2.4.5.21 Interior Liners: Provide optional textured refractory brick liner kits, pattern as indicated on Drawings. 2.4.5.22 Interior Liners: Provide optional stacked pattern, textured refractory brick liner kits, 2.4.5.23 Interior Liners: Provide optional herringbone pattern, textured refractory brick liner kits. 2.4.5.24 Outside Air Kits: Provide optional Outside Air Kits as indicated on the Drawings. 2.4.5.25 Outside Air Kits: Provide optional AK4 Outside Air Kits (complete kit, collar, hood and 36 inches (914 mm) of flex tube).

2.4.6 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.4.6.1 Model: ______as manufactured by Superior Fireplaces. 2.4.6.2 Model: Series and model number as indicated on Drawings. 2.4.6.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.4.6.4 Burners: Dual tube. 2.4.6.5 Accessories: Provide manufacturer's standard accessories and optional 10 31 00-11 ______. 2.4.6.6 Accessories: Provide optional accessories as indicated on Drawings.

2.5 MANUFACTURED INDOOR GAS FIREPLACES - MULTI-VIEW xRT40xx SERIES

2.5.1 B-Vent Gas Fireplace Systems: Traditional, see through design. 2.5.1.1 Model: BRT40STTMN Multi-View Series as manufactured by Superior Fireplaces. 2.5.1.2 Model: BRT40STTMP Multi-View Series as manufactured by Superior Fireplaces.

2.5.2 Direct Vent Gas Fireplace Systems: Traditional, see through design. 2.5.2.1 Model: DRT40STDMN Multi-View Series as manufactured by Superior Fireplaces. 2.5.2.2 Model: DRT40STDMP Multi-View Series as manufactured by Superior Fireplaces. 2.5.2.3 Model: DRT40STDEN Multi-View Series as manufactured by Superior Fireplaces.

2.5.3 Direct Vent Gas Fireplace Systems: Traditional, peninsula design. 2.5.3.1 Model: DRT40PFDMN Multi-View Series as manufactured by Superior Fireplaces. 2.5.3.2 Model: DRT40PFDMP Multi-View Series as manufactured by Superior Fireplaces. 2.5.3.3 Model: DRT40PFDEN Multi-View Series as manufactured by Superior Fireplaces.

2.5.4 Direct Vent Gas Fireplace Systems: Traditional, corner design. 2.5.4.1 Model: DRT40CLDMN Multi-View Series as manufactured by Superior Fireplaces. 2.5.4.2 Model: DRT40CLDMP Multi-View Series as manufactured by Superior Fireplaces. 2.5.4.3 Model: DRT40CLDEN Multi-View Series as manufactured by Superior Fireplaces. 2.5.4.4 Model: DRT40CRDMN Multi-View Series as manufactured by Superior Fireplaces. 2.5.4.5 Model: DRT40CRDMP Multi-View Series as manufactured by Superior Fireplaces. 2.5.4.6 Model: DRT40CRDEN Multi-View Series as manufactured by Superior Fireplaces.

2.5.5 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.5.5.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.5.5.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.5.5.3 Accessories: Provide optional accessories as indicated on Drawings.

2.5.6 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.5.6.1 Model: ______as manufactured by Superior Fireplaces. 2.5.6.2 Model: Series and model number as indicated on Drawings. 10 31 00-12 2.5.6.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.5.6.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.5.6.5 Accessories: Provide optional accessories as indicated on Drawings.

2.6 MANUFACTURED INDOOR GAS FIREPLACES - MERIT DRx2000 SERIES

2.6.1 Direct Vent Fireplace Systems: Traditional style. 2.6.1.1 Model: DRT2033xxx Merit Series as manufactured by Superior Fireplaces. 2.6.1.2 Model: DRT2035xxx Merit Series as manufactured by Superior Fireplaces. 2.6.1.3 Model: DRT2040xxx Merit Series as manufactured by Superior Fireplaces. 2.6.1.4 Model: DRT2045xxx Merit Series as manufactured by Superior Fireplaces.

2.6.2 Direct Vent Fireplace Systems: Contemporary style. 2.6.2.1 Model: DRC2033xxx Merit Series as manufactured by Superior Fireplaces. 2.6.2.2 Model: DRC2035xxx Merit Series as manufactured by Superior Fireplaces. 2.6.2.3 Model: DRC2040xxx Merit Series as manufactured by Superior Fireplaces. 2.6.2.4 Model: DRC2045xxx Merit Series as manufactured by Superior Fireplaces.

2.6.3 Fireplace Description: Tested and approved under ANSI Z21.88 for indoor applications. 2.6.3.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.6.3.2 Fuel Type: As indicated on Drawings. 2.6.3.3 Fuel Type: Natural gas. 2.6.3.4 Fuel Type: Propane/LP. 2.6.3.5 Accessories: Provide manufacturer's standard accessories and optional ______. 2.6.3.6 Accessories: Provide optional accessories as indicated on Drawings.

2.6.4 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.6.4.1 Model: ______as manufactured by Superior Fireplaces. 2.6.4.2 Model: Series and model number as indicated on Drawings. 2.6.4.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.6.4.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.6.4.5 Accessories: Provide optional accessories as indicated on Drawings.

10 31 00-13 2.7 MANUFACTURED INDOOR GAS FIREPLACES - PRO DRx3000 SERIES

2.7.1 Direct Vent Fireplace Systems: Traditional, front view design. 2.7.1.1 Model: DRT3033xxx Pro Series as manufactured by Superior Fireplaces. 2.7.1.2 Model: DRT3035xxx Pro Series as manufactured by Superior Fireplaces. 2.7.1.3 Model: DRT3040xxx Pro Series as manufactured by Superior Fireplaces. 2.7.1.4 Model: DRT3045xxx Pro Series as manufactured by Superior Fireplaces.

2.7.2 Direct Vent Fireplace Systems: Contemporary, front view design. 2.7.2.1 Model: DRC3035DEN Pro Series as manufactured by Superior Fireplaces. 2.7.2.2 Model: DRC3040DEN Pro Series as manufactured by Superior Fireplaces.

2.7.3 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.7.3.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.7.3.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.7.3.3 Accessories: Provide optional accessories as indicated on Drawings.

2.7.4 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.7.4.1 Model: ______as manufactured by Superior Fireplaces. 2.7.4.2 Model: Series and model number as indicated on Drawings. 2.7.4.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.7.4.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.7.4.5 Accessories: Provide optional accessories as indicated on Drawings.

2.8 MANUFACTURED INDOOR GAS FIREPLACES - MULTIVIEW DRT3500 SERIES

2.8.1 Direct Vent Fireplace Systems: Traditional, see through design. 2.8.1.1 Model: DRT35STDMN Multi-View Series as manufactured by Superior Fireplaces. 2.8.1.2 Model: DRT35STDMP Multi-View Series as manufactured by Superior Fireplaces. 2.8.1.3 Model: DRT35STDEN Multi-View Series as manufactured by Superior Fireplaces.

2.8.2 Direct Vent Fireplace Systems: Traditional, peninsula design. 2.8.2.1 Model: DRT35PFDMN Multi-View Series as manufactured by Superior Fireplaces. 2.8.2.2 Model: DRT35PFDMP Multi-View Series as manufactured by Superior Fireplaces. 10 31 00-14 2.8.2.3 Model: DRT35PFDEN Multi-View Series as manufactured by Superior Fireplaces.

2.8.3 Fireplace Description: Tested and approved under ANSI Z21.88 for indoor applications. 2.8.3.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.8.3.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.8.3.3 Accessories: Provide optional accessories as indicated on Drawings.

2.8.4 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.8.4.1 Model: ______as manufactured by Superior Fireplaces. 2.8.4.2 Model: Series and model number as indicated on Drawings. 2.8.4.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.8.4.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.8.4.5 Accessories: Provide optional accessories as indicated on Drawings.

2.9 MANUFACTURED INDOOR GAS FIREPLACES - PRO DRx3500 SERIES

2.9.1 Direct Vent Fireplace Systems: Traditional, front view design. 2.9.1.1 Model: DRT3535xxx Pro Series as manufactured by Superior Fireplaces. 2.9.1.2 Model: DRT3540xxx Pro Series as manufactured by Superior Fireplaces. 2.9.1.3 Model: DRT3545xxx Pro Series as manufactured by Superior Fireplaces.

2.9.2 Direct Vent Fireplace Systems: Contemporary, front view design. 2.9.2.1 Model: DRC3535xxx Pro Series as manufactured by Superior Fireplaces. 2.9.2.2 Model: DRC3540xxx Pro Series as manufactured by Superior Fireplaces.

2.9.3 Fireplace Description: Tested and approved under ANSI Z21.88 for indoor applications. 2.9.3.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.9.3.2 Fuel Type: As indicated on Drawings. 2.9.3.3 Fuel Type: Natural gas. 2.9.3.4 Fuel Type: Propane/LP. 2.9.3.5 Accessories: Provide manufacturer's standard accessories and optional ______. 2.9.3.6 Accessories: Provide optional accessories as indicated on Drawings.

2.9.4 10 31 00-15 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.9.4.1 Model: ______as manufactured by Superior Fireplaces. 2.9.4.2 Model: Series and model number as indicated on Drawings. 2.9.4.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.9.4.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.9.4.5 Accessories: Provide optional accessories as indicated on Drawings.

2.10 MANUFACTURED INDOOR GAS FIREPLACES - SIGNATURE DRx6300 SERIES

2.10.1 Direct Vent Fireplace Systems: Traditional, front view design. 2.10.1.1 Model: DRT6340TEN Signature Series as manufactured by Superior Fireplaces. 2.10.1.2 Model: DRT6340TEP Signature Series as manufactured by Superior Fireplaces. 2.10.1.3 Model: DRT6345TEN Signature Series as manufactured by Superior Fireplaces. 2.10.1.4 Model: DRT6345TEP Signature Series as manufactured by Superior Fireplaces.

2.10.2 Direct Vent Fireplace Systems: Contemporary, front view design. 2.10.2.1 Model: DRC6340TEN Signature Series as manufactured by Superior Fireplaces. 2.10.2.2 Model: DRC6340TEP Signature Series as manufactured by Superior Fireplaces. 2.10.2.3 Model: DRC6345TEN Signature Series as manufactured by Superior Fireplaces. 2.10.2.4 Model: DRC6345TEP Signature Series as manufactured by Superior Fireplaces. 2.10.2.5 View Style: Front view. 2.10.2.6 Controls Optional Remote.

2.10.3 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.10.3.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.10.3.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.10.3.3 Accessories: Provide optional accessories as indicated on Drawings.

2.10.4 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.10.4.1 Model: ______as manufactured by Superior Fireplaces. 2.10.4.2 Model: Series and model number as indicated on Drawings. 2.10.4.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.10.4.4 Accessories: Provide manufacturer's standard accessories and optional

10 31 00-16 ______. 2.10.4.5 Accessories: Provide optional accessories as indicated on Drawings.

2.11 MANUFACTURED INDOOR GAS FIREPLACES - PRO DRL3000 SERIES

2.11.1 Direct Vent Fireplace Systems: Traditional, front view design. 2.11.1.1 Model: DRL3042TEN Pro Series as manufactured by Superior Fireplaces. 2.11.1.2 Model: DRT3042TEP Pro Series as manufactured by Superior Fireplaces. 2.11.1.3 Model: DRT3042TEN Pro Series as manufactured by Superior Fireplaces. 2.11.1.4 Model: DRT3042TEP Pro Series as manufactured by Superior Fireplaces.

2.11.2 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.11.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.11.2.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.11.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.11.3 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.11.3.1 Model: ______as manufactured by Superior Fireplaces. 2.11.3.2 Model: Series and model number as indicated on Drawings. 2.11.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.11.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.11.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.12 MANUFACTURED INDOOR GAS FIREPLACES - CUSTOM DRL4543 SERIES

2.12.1 Direct Vent Fireplace Systems: Contemporary design. 2.12.1.1 Model: DRL4543TEx full model number as indicated on Drawings, Custom DRL4543 Series as manufactured by Superior Fireplaces. 2.12.1.1.1 Fuel Type: As indicated on Drawings. 2.12.1.1.2 Fuel Type: Natural gas. 2.12.1.1.3 Fuel Type: Propane/LP. 2.12.1.2 Model: DRL4543TEN Custom Series as manufactured by Superior Fireplaces. 2.12.1.2.1 Fuel Type: Natural gas. 2.12.1.3 Model: DRL4543TEP Custom Series as manufactured by Superior Fireplaces.

10 31 00-17 2.12.1.3.1 Fuel Type: Propane/LP.

2.12.2 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.12.2.1 Accessories: Provide manufacturer's standard accessories and optional ______. 2.12.2.2 Accessories: Provide optional accessories as indicated on Drawings.

2.12.3 Burners/Fire Kits: Provide vented burner systems with accessories. 2.12.3.1 Model: ______as manufactured by Superior Fireplaces. 2.12.3.2 Model: Series and model number as indicated on Drawings. 2.12.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.12.3.4 Glass Media Color: Type and color number as indicated on Drawings. 2.12.3.5 Glass Media Color: Provide manufacturer's standard type and color. 2.12.3.6 Replacement Stock: Provide ___ bags of glass media per unit, in color indicated above, in addition to standard amount included with each unit. 2.12.3.7 Accessories: Provide manufacturer's standard accessories and optional ______. 2.12.3.8 Accessories: Provide optional accessories as indicated on Drawings.

2.13 MANUFACTURED INDOOR GAS FIREPLACES - SIGNATURE DRL6500 SERIES

2.13.1 Direct Vent Fireplace Systems: Contemporary, front view design. 2.13.1.1 Model: DRL65xxTEx full model number as indicated on Drawings, Custom DRL6500 Series as manufactured by Superior Fireplaces. 2.13.1.1.1 Fuel Type: As indicated on Drawings. 2.13.1.1.2 Fuel Type: Natural gas. 2.13.1.1.3 Fuel Type: Propane/LP. 2.13.1.2 Model: DRL6542TEP Signature Series as manufactured by Superior Fireplaces. 2.13.1.2.1 Fuel Type: Propane/LP. 2.13.1.3 Model: DRL6554TEN Signature Series as manufactured by Superior Fireplaces. 2.13.1.3.1 Fuel Type: Natural gas.

2.13.2 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.13.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.13.2.2 Accessories: Provide manufacturer's standard accessories and optional ______.

10 31 00-18 2.13.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.13.3 Burners/Fire Kits: Provide vented burner systems with accessories. 2.13.3.1 Model: ______as manufactured by Superior Fireplaces. 2.13.3.2 Model: Series and model number as indicated on Drawings. 2.13.3.3 Model: Custom Series Model xxxxxxx as manufactured by Superior Fireplaces. 2.13.3.4 Compliance: Tested and approved under ANSI Z21.11.2. 2.13.3.5 Glass Media Color: Type and color number as indicated on Drawings. 2.13.3.6 Glass Media Color: Provide manufacturer's standard type and color. 2.13.3.7 Replacement Stock: Provide ___ bags of glass media per unit, in color indicated above, in addition to standard amount included with each unit. 2.13.3.8 Accessories: Provide manufacturer's standard accessories and optional ______. 2.13.3.9 Accessories: Provide optional accessories as indicated on Drawings.

2.14 MANUFACTURED INDOOR GAS FIREPLACES - CUSTOM DRT4036/42 SERIES

2.14.1 Direct Vent Fireplace Systems: Traditional, front view design. 2.14.1.1 Model: DRT40xxTEx full model number as indicated on Drawings, Custom DRT4036/42 Series as manufactured by Superior Fireplaces. 2.14.1.1.1 Fuel Type: As indicated on Drawings. 2.14.1.1.2 Fuel Type: Natural gas. 2.14.1.1.3 Fuel Type: Propane/LP. 2.14.1.2 Model: DRT4036TEN Custom Series as manufactured by Superior Fireplaces. 2.14.1.2.1 Fuel Type: Natural gas. 2.14.1.3 Model: DRT4036TEP Custom Series as manufactured by Superior Fireplaces. 2.14.1.3.1 Fuel Type: Propane/LP. 2.14.1.4 Model: DRT4042TEN Custom Series as manufactured by Superior Fireplaces. 2.14.1.4.1 Fuel Type: Natural gas. 2.14.1.5 Model: DRT4042TEP Custom Series as manufactured by Superior Fireplaces. 2.14.1.5.1 Fuel Type: Propane/LP.

2.14.2 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.14.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.14.2.2 10 31 00-19 Accessories: Provide manufacturer's standard accessories and optional ______. 2.14.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.14.3 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.14.3.1 Model: ______as manufactured by Superior Fireplaces. 2.14.3.2 Model: Series and model number as indicated on Drawings. 2.14.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.14.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.14.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.15 MANUFACTURED INDOOR GAS FIREPLACES - CUSTOM DRT4040/45 SERIES

2.15.1 Direct Vent Fireplace Systems: Traditional, front view design. 2.15.1.1 Model: DRT404xTEx full model number as indicated on Drawings, Custom DRT4040/45 Series as manufactured by Superior Fireplaces. 2.15.1.1.1 Fuel Type: As indicated on Drawings. 2.15.1.1.2 Fuel Type: Natural gas. 2.15.1.1.3 Fuel Type: Propane/LP. 2.15.1.2 Model: DRT4040TEN Custom Series as manufactured by Superior Fireplaces. 2.15.1.2.1 Fuel Type: Natural gas. 2.15.1.3 Model: DRT4040TEP Custom Series as manufactured by Superior Fireplaces. 2.15.1.3.1 Fuel Type: Propane/LP. 2.15.1.4 Model: DRT4045TEN Custom Series as manufactured by Superior Fireplaces. 2.15.1.4.1 Fuel Type: Natural gas. 2.15.1.5 Model: DRT4045TEP Custom Series as manufactured by Superior Fireplaces. 2.15.1.5.1 Fuel Type: Propane/LP.

2.15.2 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.15.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.15.2.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.15.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.15.3 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories.

10 31 00-20 2.15.3.1 Model: ______as manufactured by Superior Fireplaces. 2.15.3.2 Model: Series and model number as indicated on Drawings. 2.15.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.15.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.15.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.16 MANUFACTURED INDOOR GAS FIREPLACES - SIGNATURE DRT63ST SERIES

2.16.1 Direct Vent Fireplace Systems: Traditional, see through design. 2.16.1.1 Model: DRT63STxxx full model number as indicated on Drawings, Signature DRT63ST Series as manufactured by Superior Fireplaces. 2.16.1.1.1 Fuel Type: As indicated on Drawings. 2.16.1.1.2 Fuel Type: Natural gas. 2.16.1.1.3 Fuel Type: Propane/LP. 2.16.1.2 Model: DRT63STTEN Signature Series as manufactured by Superior Fireplaces 2.16.1.2.1 Fuel Type: Natural gas. 2.16.1.3 Model: DRT63STTEP Signature Series as manufactured by Superior Fireplaces 2.16.1.3.1 Fuel Type: Propane/LP. 2.16.1.4 Model: DRT63STYN Signature Series as manufactured by Superior Fireplaces. 2.16.1.4.1 Fuel Type: Natural gas.

2.16.2 Fireplace Description: Tested and approved under ANSI Z21.50 for indoor applications. 2.16.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.16.2.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.16.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.16.3 Simulated Log Fire Kits: Provide vented burner systems with logs and accessories. 2.16.3.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.16.3.2 Model: ______as manufactured by Superior Fireplaces. 2.16.3.3 Model: Series and model number as indicated on Drawings. 2.16.3.4 Compliance: Tested and approved under ANSI Z21.11.2. 2.16.3.5 Accessories: Provide manufacturer's standard accessories and optional ______. 10 31 00-21 2.16.3.6 Accessories: Provide optional accessories as indicated on Drawings.

2.17 MANUFACTURED INDOOR GAS FIREPLACES - SIGNATURE VCM3026 SERIES

2.17.1 Vent-Free Fireplace Systems: Traditional, compact design. 2.17.1.1 Model: VCM3026Zxx full model number as indicated on Drawings, Signature VCM2036 Series as manufactured by Superior Fireplaces. 2.17.1.1.1 Fuel Type: As indicated on Drawings. 2.17.1.1.2 Fuel Type: Natural gas. 2.17.1.1.3 Fuel Type: Propane/LP. 2.17.1.2 Model: VCM3026ZTP Signature Series as manufactured by Superior Fireplaces. 2.17.1.2.1 Fuel Type: Propane/LP. 2.17.1.3 Model: VCM3026ZTN Signature Series as manufactured by Superior Fireplaces. 2.17.1.3.1 Fuel Type: Natural gas. 2.17.1.4 Model: VCM3026ZMP Signature Series as manufactured by Superior Fireplaces. 2.17.1.4.1 Fuel Type: Propane/LP. 2.17.1.5 Model: VCM3026ZMN Signature Series as manufactured by Superior Fireplaces. 2.17.1.5.1 Fuel Type: Natural gas.

2.17.2 Fireplace Description: Tested and approved under ANSI Z21.11.2 for indoor applications. 2.17.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.17.2.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.17.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.17.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.17.3.1 Model: ______as manufactured by Superior Fireplaces. 2.17.3.2 Model: Series and model number as indicated on Drawings. 2.17.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.17.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.17.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.18 MANUFACTURED INDOOR GAS FIREPLACES - MERIT VxT2000 SERIES

2.18.1

10 31 00-22 Vent-Free Fireplace Systems: Traditional, compact, circulating design. 2.18.1.1 Model: VxT20xxxx, full model number as indicated on Drawings, Merit VxT2000 Series as manufactured by Superior Fireplaces. 2.18.1.1.1 Refractory Liners: Provide interior paneling, pattern as indicated on Drawings. 2.18.1.1.2 Refractory Liners: Provide interior paneling, black. 2.18.1.1.3 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.18.1.2 Model: VRT2036B Merit Series as manufactured by Superior Fireplaces. 2.18.1.2.1 Refractory Liners: Provide interior paneling, black. 2.18.1.3 Model: VRT2036WS Merit Series as manufactured by Superior Fireplaces. 2.18.1.3.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.18.1.4 Model: VRT2042B Merit Series as manufactured by Superior Fireplaces. 2.18.1.4.1 Refractory Liners: Provide interior paneling, black. 2.18.1.5 Model: VRT2042WS Merit Series as manufactured by Superior Fireplaces. 2.18.1.5.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.18.1.6 Model: VCT2036B Merit Series as manufactured by Superior Fireplaces. 2.18.1.6.1 Refractory Liners: Provide interior paneling, black. 2.18.1.7 Model: VCT2036WS Merit Series as manufactured by Superior Fireplaces. 2.18.1.7.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.18.1.8 Model: VCT2042B Merit Series as manufactured by Superior Fireplaces. 2.18.1.8.1 Refractory Liners: Provide interior paneling, black. 2.18.1.9 Model: VCT2042WS Merit Series as manufactured by Superior Fireplaces. 2.18.1.9.1 Refractory Liners: Provide interior paneling with White Stacked pattern.

2.18.2 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.18.2.1 Fuel Type: As indicated on Drawings. 2.18.2.2 Fuel Type: Natural gas. 2.18.2.3 Fuel Type: Propane/LP. 2.18.2.4 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.18.2.5 Face Style: As indicated on Drawings. 2.18.2.6 Face Style: Flush faced model. 2.18.2.7 Face Style: Rolled louvered paneled model. 2.18.2.8 Accessories: Provide manufacturer's standard accessories and optional ______. 10 31 00-23 2.18.2.9 Accessories: Provide optional accessories as indicated on Drawings.

2.18.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.18.3.1 Model: ______as manufactured by Superior Fireplaces. 2.18.3.2 Model: Series and model number as indicated on Drawings. 2.18.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.18.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.18.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.19 MANUFACTURED INDOOR GAS FIREBOXES - PRO VxT3000 SERIES

2.19.1 Vent-Free Fireplace Systems: Traditional, front view design. 2.19.1.1 Model: VxT30xxxx, full model number as indicated on Drawings, Pro VxT3000 Series as manufactured by Superior Fireplaces. 2.19.1.1.1 Refractory Liners: Provide interior paneling, pattern as indicated on Drawings. 2.19.1.1.2 Refractory Liners: Provide interior paneling, black. 2.19.1.1.3 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.19.1.1.4 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.19.1.1.5 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.19.1.2 Model: VRT3032B Pro Series as manufactured by Superior Fireplaces. 2.19.1.2.1 Refractory Liners: Provide interior paneling, black. 2.19.1.3 Model: VRT3032WS Pro Series as manufactured by Superior Fireplaces. 2.19.1.3.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.19.1.4 Model: VRT3032RS Pro Series as manufactured by Superior Fireplaces. 2.19.1.4.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.19.1.5 Model: VRT3032RH Pro Series as manufactured by Superior Fireplaces. 2.19.1.5.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.19.1.6 Model: VRT3036B Pro Series as manufactured by Superior Fireplaces. 2.19.1.6.1 Refractory Liners: Provide interior paneling, black. 2.19.1.7 Model: VRT3036WS Pro Series as manufactured by Superior Fireplaces. 2.19.1.7.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.19.1.8 Model: VRT3036RS Pro Series as manufactured by Superior Fireplaces. 2.19.1.8.1 10 31 00-24 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.19.1.9 Model: VRT3036RH Pro Series as manufactured by Superior Fireplaces. 2.19.1.9.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.19.1.10 Model: VRT3042B Pro Series as manufactured by Superior Fireplaces. 2.19.1.10.1 Refractory Liners: Provide interior paneling, black. 2.19.1.11 Model: VRT3042WS Pro Series as manufactured by Superior Fireplaces. 2.19.1.11.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.19.1.12 Model: VRT3042RS Pro Series as manufactured by Superior Fireplaces. 2.19.1.12.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.19.1.13 Model: VRT3042RH Pro Series as manufactured by Superior Fireplaces. 2.19.1.13.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.19.1.14 Model: VCT3032B Pro Series as manufactured by Superior Fireplaces. 2.19.1.14.1 Refractory Liners: Provide interior paneling, black. 2.19.1.15 Model: VCT3032WS Pro Series as manufactured by Superior Fireplaces. 2.19.1.15.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.19.1.16 Model: VCT3032RS Pro Series as manufactured by Superior Fireplaces. 2.19.1.16.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.19.1.17 Model: VCT3032RH Pro Series as manufactured by Superior Fireplaces. 2.19.1.17.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.19.1.18 Model: VCT3036B Pro Series as manufactured by Superior Fireplaces. 2.19.1.18.1 Refractory Liners: Provide interior paneling, black. 2.19.1.19 Model: VCT3036WS Pro Series as manufactured by Superior Fireplaces. 2.19.1.19.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.19.1.20 Model: VCT3036RS Pro Series as manufactured by Superior Fireplaces. 2.19.1.20.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.19.1.21 Model: VCT3036RH Pro Series as manufactured by Superior Fireplaces. 2.19.1.21.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.19.1.22 Model: VCT3042B Pro Series as manufactured by Superior Fireplaces. 2.19.1.22.1 Refractory Liners: Provide interior paneling, black. 2.19.1.23 Model: VCT3042WS Pro Series as manufactured by Superior Fireplaces. 2.19.1.23.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.19.1.24 10 31 00-25 Model: VCT3042RS Pro Series as manufactured by Superior Fireplaces. 2.19.1.24.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.19.1.25 Model: VCT3042RH Pro Series as manufactured by Superior Fireplaces. 2.19.1.25.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.19.1.26 Model: FBF36WS-LS Pro Series as manufactured by Superior Fireplaces. 2.19.1.26.1 Refractory Liners: Provide interior paneling with White Stacked pattern.

2.19.2 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.19.2.1 Fuel Type: As indicated on Drawings. 2.19.2.2 Fuel Type: Natural gas. 2.19.2.3 Fuel Type: Propane/LP. 2.19.2.4 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.19.2.5 Face Style: As indicated on Drawings. 2.19.2.6 Face Style: Flush faced model. 2.19.2.7 Face Style: Rolled louvered paneled model. 2.19.2.8 Accessories: Provide manufacturer's standard accessories and optional ______. 2.19.2.9 Accessories: Provide optional accessories as indicated on Drawings.

2.19.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.19.3.1 Model: ______as manufactured by Superior Fireplaces. 2.19.3.2 Model: Series and model number as indicated on Drawings. 2.19.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.19.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.19.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.20 MANUFACTURED INDOOR GAS FIREPLACES - CUSTOM VxT4000Z SERIES

2.20.1 Vent-Free Fireplace Systems: Traditional radiant faced design. 2.20.1.1 Model: VxT40xxZEx, full model number as indicated on Drawings, Custom VxT4000Z Series as manufactured by Superior Fireplaces. 2.20.1.1.1 Fuel Type: As indicated on Drawings. 2.20.1.1.2 Fuel Type: Natural gas. 2.20.1.1.3 Fuel Type: Propane/LP. 10 31 00-26 2.20.1.2 Model: VRT4032ZEN Custom Series as manufactured by Superior Fireplaces. 2.20.1.2.1 Fuel Type: Natural gas. 2.20.1.3 Model: VRT4032ZEP Custom Series as manufactured by Superior Fireplaces. 2.20.1.3.1 Fuel Type: Propane/LP. 2.20.1.4 Model: VRT4036ZEN Custom Series as manufactured by Superior Fireplaces. 2.20.1.4.1 Fuel Type: Natural gas. 2.20.1.5 Model: VRT4036ZEP Custom Series as manufactured by Superior Fireplaces. 2.20.1.5.1 Fuel Type: Propane/LP. 2.20.1.6 Model: VCT4032ZEN Custom Series as manufactured by Superior Fireplaces. 2.20.1.6.1 Fuel Type: Natural gas. 2.20.1.7 Model: VCT4032ZEP Custom Series as manufactured by Superior Fireplaces. 2.20.1.7.1 Fuel Type: Propane/LP. 2.20.1.8 Model: VCT4036ZEN Custom Series as manufactured by Superior Fireplaces. 2.20.1.8.1 Fuel Type: Natural gas. 2.20.1.9 Model: VCT4036ZEP Custom Series as manufactured by Superior Fireplaces. 2.20.1.9.1 Fuel Type: Propane/LP.

2.20.2 Fireplace Description: Tested and approved under ANSI Z21.11.2 for indoor applications. 2.20.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.20.2.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.20.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.20.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.20.3.1 Model: ______as manufactured by Superior Fireplaces. 2.20.3.2 Model: Series and model number as indicated on Drawings. 2.20.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.20.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.20.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.21 MANUFACTURED INDOOR GAS FIREPLACES - MULTI-VIEW CUSTOM VxT43xx SERIES

2.21.1 Vent-Free Fireplace Systems: Traditional, multi-view design. 10 31 00-27 2.21.1.1 Model: VxT43xxWS, full model number as indicated on Drawings, Custom VRT3500 Series as manufactured by Superior Fireplaces.

2.21.2 Vent-Free Fireplace Systems: Traditional, see through design. 2.21.2.1 Model: VxT43STWS, full model number as indicated on Drawings, Custom VRT3500 Series as manufactured by Superior Fireplaces. 2.21.2.2 Model: VRT43STWS Multi-View Custom Series as manufactured by Superior Fireplaces. 2.21.2.3 Model: VCT43STWS Multi-View Custom Series as manufactured by Superior Fireplaces.

2.21.3 Vent-Free Fireplace Systems: Traditional, peninsula design. 2.21.3.1 Model: VRT43PFWS Multi-View Custom Series as manufactured by Superior Fireplaces.

2.21.4 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.21.4.1 Fuel Type: As indicated on Drawings. 2.21.4.2 Fuel Type: Natural gas. 2.21.4.3 Fuel Type: Propane/LP. 2.21.4.4 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.21.4.5 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.21.4.6 Accessories: Provide manufacturer's standard accessories and optional ______. 2.21.4.7 Accessories: Provide optional accessories as indicated on Drawings.

2.21.5 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.21.5.1 Model: ______as manufactured by Superior Fireplaces. 2.21.5.2 Model: Series and model number as indicated on Drawings. 2.21.5.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.21.5.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.21.5.5 Accessories: Provide optional accessories as indicated on Drawings.

2.22 MANUFACTURED INDOOR GAS FIREPLACES - CUSTOM VRL4543 SERIES

2.22.1 Vent-Free Fireplace Systems: Contemporary, front view design. 2.22.1.1 Model: VRL4543ZMx, full model number as indicated on Drawings, Custom VRL4543 Series as manufactured by Superior Fireplaces.

10 31 00-28 2.22.1.1.1 Fuel Type: As indicated on Drawings. 2.22.1.1.2 Fuel Type: Natural gas. 2.22.1.1.3 Fuel Type: Propane/LP. 2.22.1.2 Model: VRL4543ZMN Custom Series as manufactured by Superior Fireplaces. 2.22.1.3 Model: VRL4543ZMP Custom Series as manufactured by Superior Fireplaces.

2.22.2 Fireplace Description: Tested and approved under ANSI Z21.11.2 for indoor applications. 2.22.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.22.2.2 Accessories: Provide manufacturer's standard accessories and optional ______. 2.22.2.3 Accessories: Provide optional accessories as indicated on Drawings.

2.22.3 Burners/Fire Kits: Provide vent-free burner systems with accessories. 2.22.3.1 Model: ______as manufactured by Superior Fireplaces. 2.22.3.2 Model: Series and model number as indicated on Drawings. 2.22.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.22.3.4 Glass Media Color: Type and color number as indicated on Drawings. 2.22.3.5 Glass Media Color: Provide manufacturer's standard type and color. 2.22.3.6 Replacement Stock: Provide ___ bags of glass media per unit, in color indicated above, in addition to standard amount included with each unit. 2.22.3.7 Accessories: Provide manufacturer's standard accessories and optional ______. 2.22.3.8 Accessories: Provide optional accessories as indicated on Drawings.

2.23 MANUFACTURED INDOOR GAS FIREPLACES - PRO VRT2536 SERIES

2.23.1 Vent-Free Fireplace Systems: Traditional, front view design. 2.23.1.1 Model: VRT2536WS Pro Series as manufactured by Superior Fireplaces. 2.23.1.2 Refractory Liners: Provide interior paneling with White Stacked pattern.

2.23.2 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.23.2.1 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.23.2.2 Fuel Type: As indicated on Drawings. 2.23.2.3 Fuel Type: Natural gas. 2.23.2.4 Fuel Type: Propane/LP.

10 31 00-29 2.23.2.5 Accessories: Provide manufacturer's standard accessories and optional ______. 2.23.2.6 Accessories: Provide optional accessories as indicated on Drawings.

2.23.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.23.3.1 Model: ______as manufactured by Superior Fireplaces. 2.23.3.2 Model: Series and model number as indicated on Drawings. 2.23.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.23.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.23.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.24 MANUFACTURED INDOOR GAS FIREPLACES - MERIT VRT3500 SERIES

2.24.1 Vent-Free Fireplace Systems: Traditional, front view design. 2.24.1.1 Model: VRT35xxxx, full model number as indicated on Drawings, Merit VRT3500 Series as manufactured by Superior Fireplaces. 2.24.1.1.1 Refractory Liners: Provide interior paneling, pattern as indicated on Drawings. 2.24.1.1.2 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.24.1.1.3 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.24.1.2 Model: VRT3536WS Merit Series as manufactured by Superior Fireplaces. 2.24.1.2.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.24.1.3 Model: VRT3536WH Merit Series as manufactured by Superior Fireplaces. 2.24.1.3.1 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.24.1.4 Model: VRT3542WS Merit Series as manufactured by Superior Fireplaces. 2.24.1.4.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.24.1.5 Model: VRT3542WH Merit Series as manufactured by Superior Fireplaces. 2.24.1.5.1 Refractory Liners: Provide interior paneling with White Herringbone pattern.

2.24.2 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.24.2.1 Fuel Type: As indicated on Drawings. 2.24.2.2 Fuel Type: Natural gas. 2.24.2.3 Fuel Type: Propane/LP. 2.24.2.4 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.24.2.5 10 31 00-30 Accessories: Provide manufacturer's standard accessories and optional ______. 2.24.2.6 Accessories: Provide optional accessories as indicated on Drawings.

2.24.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.24.3.1 Model: ______as manufactured by Superior Fireplaces. 2.24.3.2 Model: Series and model number as indicated on Drawings. 2.24.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.24.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.24.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.25 MANUFACTURED INDOOR GAS FIREPLACES - CUSTOM VRT4000 SERIES

2.25.1 Vent-Free Fireplace Systems: Traditional, front view design. 2.25.1.1 Model: VRT40xxxx, full model number as indicated on Drawings, Custom VRT4000 Series as manufactured by Superior Fireplaces. 2.25.1.1.1 Refractory Liners: Provide interior paneling, pattern as indicated on Drawings. 2.25.1.1.2 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.25.1.1.3 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.25.1.1.4 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.25.1.1.5 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.25.1.2 Model: VRT4032WS Custom Series as manufactured by Superior Fireplaces. 2.25.1.2.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.25.1.3 Model: VRT4032WH Custom Series as manufactured by Superior Fireplaces. 2.25.1.3.1 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.25.1.4 Model: VRT4032RS Custom Series as manufactured by Superior Fireplaces. 2.25.1.4.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.25.1.5 Model: VRT4032RH Custom Series as manufactured by Superior Fireplaces. 2.25.1.5.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.25.1.6 Model: VRT4036WS Custom Series as manufactured by Superior Fireplaces. 2.25.1.6.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.25.1.7 Model: VRT4036WH Custom Series as manufactured by Superior Fireplaces. 2.25.1.7.1 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.25.1.8 10 31 00-31 Model: VRT4036RS Custom Series as manufactured by Superior Fireplaces. 2.25.1.8.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.25.1.9 Model: VRT4036RH Custom Series as manufactured by Superior Fireplaces. 2.25.1.9.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.25.1.10 Model: VRT4042WS Custom Series as manufactured by Superior Fireplaces. 2.25.1.10.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.25.1.11 Model: VRT4042WH Custom Series as manufactured by Superior Fireplaces. 2.25.1.11.1 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.25.1.12 Model: VRT4042RS Custom Series as manufactured by Superior Fireplaces. 2.25.1.12.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.25.1.13 Model: VRT4042RH Custom Series as manufactured by Superior Fireplaces. 2.25.1.13.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern.

2.25.2 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.25.2.1 Fuel Type: As indicated on Drawings. 2.25.2.2 Fuel Type: Natural gas. 2.25.2.3 Fuel Type: Propane/LP. 2.25.2.4 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.25.2.5 Accessories: Provide manufacturer's standard accessories and optional ______. 2.25.2.6 Accessories: Provide optional accessories as indicated on Drawings.

2.25.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.25.3.1 Model: ______as manufactured by Superior Fireplaces. 2.25.3.2 Model: Series and model number as indicated on Drawings. 2.25.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.25.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.25.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.26 MANUFACTURED INDOOR GAS FIREBOXES - CUSTOM VRT4500 SERIES

2.26.1 Vent-Free Fireplace Systems: Traditional, front view design. 2.26.1.1 Model: VRT45xxxx, full model number as indicated on Drawings, Custom VRT4500 Series as manufactured by Superior Fireplaces. 10 31 00-32 2.26.1.1.1 Refractory Liners: Provide interior paneling, pattern as indicated on Drawings. 2.26.1.1.2 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.26.1.1.3 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.26.1.1.4 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.26.1.1.5 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.26.1.2 Model: VRT4536RS Custom Series as manufactured by Superior Fireplaces. 2.26.1.2.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.26.1.3 Model: VRT4536RH Custom Series as manufactured by Superior Fireplaces. 2.26.1.3.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.26.1.4 Model: VRT4536WS Custom Series as manufactured by Superior Fireplaces. 2.26.1.4.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.26.1.5 Model: VRT4536WH Custom Series as manufactured by Superior Fireplaces. 2.26.1.5.1 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.26.1.6 Model: VRT4542RS Custom Series as manufactured by Superior Fireplaces. 2.26.1.6.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.26.1.7 Model: VRT4542RH Custom Series as manufactured by Superior Fireplaces. 2.26.1.7.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.26.1.8 Model: VRT4542WS Custom Series as manufactured by Superior Fireplaces. 2.26.1.8.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.26.1.9 Model: VRT4542WH Custom Series as manufactured by Superior Fireplaces. 2.26.1.9.1 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.26.1.10 Model: VRT4550RS Custom Series as manufactured by Superior Fireplaces. 2.26.1.10.1 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.26.1.11 Model: VRT4550RH Custom Series as manufactured by Superior Fireplaces. 2.26.1.11.1 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.26.1.12 Model: VRT4550WS Custom Series as manufactured by Superior Fireplaces. 2.26.1.12.1 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.26.1.13 Model: VRT4550WH Custom Series as manufactured by Superior Fireplaces. 2.26.1.13.1 Refractory Liners: Provide interior paneling with White Herringbone pattern.

2.26.2 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.26.2.1 10 31 00-33 Fuel Type: As indicated on Drawings. 2.26.2.2 Fuel Type: Natural gas. 2.26.2.3 Fuel Type: Propane/LP. 2.26.2.4 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.26.2.5 Accessories: Provide manufacturer's standard accessories and optional ______. 2.26.2.6 Accessories: Provide optional accessories as indicated on Drawings.

2.26.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.26.3.1 Model: ______as manufactured by Superior Fireplaces. 2.26.3.2 Model: Series and model number as indicated on Drawings. 2.26.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.26.3.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.26.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.27 MANUFACTURED INDOOR GAS FIREPLACES - SIGNATURE VRT6000 SERIES

2.27.1 Vent-Free Fireplace Systems: Traditional, front view design. 2.27.1.1 Model: VRT60xxxx, full model number as indicated on Drawings, Signature VRT6000 Series as manufactured by Superior Fireplaces. 2.27.1.1.1 Interior Liners: Provide Mosaic Masonry Brick, pattern as indicated on Drawings. 2.27.1.1.2 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Stacked pattern. 2.27.1.1.3 Interior Liners: Provide Mosaic Masonry Brick, Ivory Stacked pattern. 2.27.1.1.4 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Herringbone pattern. 2.27.1.1.5 Interior Liners: Provide Mosaic Masonry Brick, Ivory Herringbone pattern. 2.27.1.2 Model: VRT6036RS Signature Series as manufactured by Superior Fireplaces. 2.27.1.2.1 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Stacked pattern. 2.27.1.3 Model: VRT6036IS Signature Series as manufactured by Superior Fireplaces. 2.27.1.3.1 Interior Liners: Provide Mosaic Masonry Brick, Ivory Stacked pattern. 2.27.1.4 Model: VRT6036RH Signature Series as manufactured by Superior Fireplaces. 2.27.1.4.1 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Herringbone pattern. 2.27.1.5 Model: VRT6036IH Signature Series as manufactured by Superior Fireplaces. 10 31 00-34 2.27.1.5.1 Interior Liners: Provide Mosaic Masonry Brick, Ivory Herringbone pattern. 2.27.1.6 Model: VRT6042RS Signature Series as manufactured by Superior Fireplaces. 2.27.1.6.1 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Stacked pattern. 2.27.1.7 Model: VRT6042IS Signature Series as manufactured by Superior Fireplaces. 2.27.1.7.1 Interior Liners: Provide Mosaic Masonry Brick, Ivory Stacked pattern. 2.27.1.8 Model: VRT6042RH Signature Series as manufactured by Superior Fireplaces. 2.27.1.8.1 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Herringbone pattern. 2.27.1.9 Model: VRT6042IH Signature Series as manufactured by Superior Fireplaces. 2.27.1.9.1 Interior Liners: Provide Mosaic Masonry Brick, Ivory Herringbone pattern. 2.27.1.10 Model: VRT6050RS Signature Series as manufactured by Superior Fireplaces. 2.27.1.10.1 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Stacked pattern. 2.27.1.11 Model: VRT6050IS Signature Series as manufactured by Superior Fireplaces. 2.27.1.11.1 Interior Liners: Provide Mosaic Masonry Brick, Ivory Stacked pattern. 2.27.1.12 Model: VRT6050RH Signature Series as manufactured by Superior Fireplaces. 2.27.1.12.1 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Herringbone pattern. 2.27.1.13 Model: VRT6050IH Signature Series as manufactured by Superior Fireplaces. 2.27.1.13.1 Interior Liners: Provide Mosaic Masonry Brick, Ivory Herringbone pattern.

2.27.2 Fireplace Description: Tested and approved under ANSI Z21.91 for indoor applications. 2.27.2.1 Fuel Type: As indicated on Drawings. 2.27.2.2 Fuel Type: Natural gas. 2.27.2.3 Fuel Type: Propane/LP. 2.27.2.4 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.27.2.5 Accessories: Provide manufacturer's standard accessories and optional ______. 2.27.2.6 Accessories: Provide optional accessories as indicated on Drawings.

2.27.3 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.27.3.1 Model: ______as manufactured by Superior Fireplaces. 2.27.3.2 Model: Series and model number as indicated on Drawings. 2.27.3.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.27.3.4 10 31 00-35 Accessories: Provide manufacturer's standard accessories and optional ______. 2.27.3.5 Accessories: Provide optional accessories as indicated on Drawings.

2.28 MANUFACTURED OUTDOOR GAS FIREPLACES - PRO VRE3000 SERIES

2.28.1 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.28.1.1 Model: VRE30xxZMx, full model number as indicated on Drawings, Pro VRE3000 Series as manufactured by Superior Fireplaces. 2.28.1.2 Fuel Type: As indicated on Drawings. 2.28.1.3 Fuel Type: Natural gas. 2.28.1.4 Fuel Type: Propane/LP.

2.28.2 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.28.2.1 Model: VRE3036ZMN Pro Series as manufactured by Superior Fireplaces. 2.28.2.2 Fuel Type: Natural gas. 2.28.2.3 Rating (Variable): 28,000/41,000 BTU/hr.

2.28.3 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.28.3.1 Model: VRE3042ZMN Pro Series as manufactured by Superior Fireplaces. 2.28.3.2 Fuel Type: Natural gas. 2.28.3.3 Rating (Variable): 32,000/47,000 BTU/hr.

2.28.4 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.28.4.1 Model: VRE3036ZMP Pro Series as manufactured by Superior Fireplaces. 2.28.4.2 Fuel Type: Propane/LP. 2.28.4.3 Rating (Variable): 32,000/41,000 BTU/hr.

2.28.5 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.28.5.1 Model: VRE3042ZMP Pro Series as manufactured by Superior Fireplaces. 2.28.5.2 Fuel Type: Propane/LP. 2.28.5.3 Rating (Variable): 35,000/45,000 BTU/hr.

2.28.6 Fireplace Description: Stainless steel construction. 2.28.6.1 Compliance: Tested and approved under ANSI Z21.60 for outdoor applications. 2.28.6.2 Mounting: Flush face design. 2.28.6.3 10 31 00-36 Pilot Ignition: Piezoelectric igniter, matches/lighter not required. 2.28.6.4 Description of Fire: Random, yellow flames with glowing, simulated embers. 2.28.6.5 Gas Control Valves: Concealed. 2.28.6.6 Log Grates and Burners: Stainless steel. 2.28.6.7 Fire Screens: Stainless steel mesh, retract into concealed screen pockets. 2.28.6.8 Refractory Liners: Provide interior paneling with pattern as indicated on Drawings. 2.28.6.9 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.28.6.10 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.28.6.11 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.28.6.12 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.28.6.13 Doors: Provide optional bi-fold glass doors with finish as indicated on Drawings. 2.28.6.14 Doors: Provide optional bi-fold glass doors with black finish. 2.28.6.15 Doors: Provide optional bi-fold glass doors with brushed brass finish. 2.28.6.16 Doors: Provide optional bi-fold glass doors with platinum finish. 2.28.6.17 Hoods: Provide optional fireplace hoods, stainless steel with 4 inch (102 mm) brow. 2.28.6.18 Panel Covers: Provide optional metal covers for closing fireplaces when not in use. 2.28.6.19 Drainpans: Provide optional drainpans with 1 inch (25 mm) stainless steel decorative face extension. 2.28.6.20 Remote Controls: Provide optional MRC remote control system with receiver, hand- held on/off remote control and dual safety lock feature. 2.28.6.21 Wall Switches: Provide optional GWMS2 wall mounted on/off switch. 2.28.6.22 Equipment Shutoff Valves: Provide optional equipment shutoff valves with 1/8 inch (3.2 mm) NPT tap in lieu of test gauge connections.

2.28.7 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.28.7.1 Model: ______as manufactured by Superior Fireplaces. 2.28.7.2 Model: Series and model number as indicated on Drawings. 2.28.7.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.28.7.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.28.7.5 Accessories: Provide optional accessories as indicated on Drawings.

2.29 MANUFACTURED OUTDOOR GAS FIREBOXES - CUSTOM VRE4000 SERIES

2.29.1 Vent-Free Gas Fireboxes: Traditional, front view style. 10 31 00-37 2.29.1.1 Model: VRE40xxxx, full model number as indicated on Drawings, Signature VRE4000 Series as manufactured by Superior Fireplaces. 2.29.1.2 Refractory Liners: Provide interior paneling, in pattern as indicated on Drawings. 2.29.1.3 Refractory Liners: Provide interior paneling with Red Stacked pattern. 2.29.1.4 Refractory Liners: Provide interior paneling with Red Herringbone pattern. 2.29.1.5 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.29.1.6 Refractory Liners: Provide interior paneling with White Herringbone pattern.

2.29.2 Vent-Free Gas Fireboxes: Traditional, front view style. 2.29.2.1 Model: VRE40xxRS, full model number as indicated on Drawings, Custom VRE4000 Series as manufactured by Superior Fireplaces. 2.29.2.2 Model: VRE4032RS Custom Series as manufactured by Superior Fireplaces. 2.29.2.3 Model: VRE4036RS Custom Series as manufactured by Superior Fireplaces. 2.29.2.4 Model: VRE4042RS Custom Series as manufactured by Superior Fireplaces. 2.29.2.5 Refractory Liners: Provide interior paneling with Red Stacked pattern.

2.29.3 Vent-Free Gas Fireboxes: Traditional, front view style. 2.29.3.1 Model: VRE40xxRH, full model number as indicated on Drawings, Custom VRE4000 Series as manufactured by Superior Fireplaces. 2.29.3.2 Model: VRE4032RH Custom Series as manufactured by Superior Fireplaces. 2.29.3.3 Model: VRE4036RH Custom Series as manufactured by Superior Fireplaces. 2.29.3.4 Model: VRE4042RH Custom Series as manufactured by Superior Fireplaces. 2.29.3.5 Refractory Liners: Provide interior paneling with Red Herringbone pattern.

2.29.4 Vent-Free Gas Fireboxes: Traditional, front view style. 2.29.4.1 Model: VRE40xxWS, full model number as indicated on Drawings, Custom VRE4000 Series as manufactured by Superior Fireplaces. 2.29.4.2 Model: VRE4032WS Custom Series as manufactured by Superior Fireplaces. 2.29.4.3 Model: VRE4036WS Custom Series as manufactured by Superior Fireplaces. 2.29.4.4 Model: VRE4042WS Custom Series as manufactured by Superior Fireplaces. 2.29.4.5 Refractory Liners: Provide interior paneling with White Stacked pattern.

2.29.5 Vent-Free Gas Fireboxes: Traditional, front view style. 2.29.5.1 Model: VRE40xxWH, full model number as indicated on Drawings, Custom VRE4000 Series as manufactured by Superior Fireplaces. 2.29.5.2 10 31 00-38 Model: VRE4032WH Custom Series as manufactured by Superior Fireplaces. 2.29.5.3 Model: VRE4036WH Custom Series as manufactured by Superior Fireplaces. 2.29.5.4 Model: VRE4042WH Custom Series as manufactured by Superior Fireplaces. 2.29.5.5 Refractory Liners: Provide interior paneling with White Herringbone pattern.

2.29.6 Firebox Description: Stainless steel construction. 2.29.6.1 Fuel Type: As indicated on Drawings. 2.29.6.2 Fuel Type: Natural gas. 2.29.6.3 Fuel Type: Propane/LP. 2.29.6.4 Compliance: Tested and approved under ANSI Z21.91. 2.29.6.5 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.29.6.6 Mounting: Flush hearth floor design; spacer not required for combustible floors. 2.29.6.7 Operation: Heater installed in firebox requires no electricity to operate. 2.29.6.8 Fire Screens: Stainless steel mesh. 2.29.6.9 Outside Air Kits: Provide optional Outside Air Kits as indicated on the Drawings. 2.29.6.10 Outside Air Kits: Provide optional AK4 Outside Air Kits (complete kit, collar, hood and 36 inches (914 mm) of flex tube). 2.29.6.11 Outside Air Kits: Provide optional AK4X Outside Air Kits (collar and hood, compatible with 4 inch (102 mm) flex tube). 2.29.6.12 Outside Air Kits: Provide optional AK4B Outside Air Kits (50pc bulk, collar only). 2.29.6.13 Hoods: Provide optional fireplace hoods with finish as indicated on Drawings. 2.29.6.14 Hoods: Provide optional fireplace hoods with bushed brass finish. 2.29.6.15 Hoods: Provide optional fireplace hoods with platinum finish. 2.29.6.16 Mantels: Provide optional mantels, type, style and finish as indicated on Drawings. 2.29.6.17 Mantels: Provide optional wall mantel, unfinished, Traditional style. 2.29.6.18 Mantels: Provide optional wall mantel, oak stain, Traditional style. 2.29.6.19 Mantels: Provide optional corner mantel, unfinished, Traditional style. 2.29.6.20 Mantels: Provide optional corner mantel, oak stain, Traditional style. 2.29.6.21 Mantels: Provide optional wall mantel, unfinished, Traditional style. 2.29.6.22 Mantels: Provide optional corner mantel, oak stain, Georgian style. 2.29.6.23 Perimeter Trim: Provide optional perimeter trim with finish as indicated on Drawings. 2.29.6.24 Perimeter Trim: Provide optional perimeter trim with black finish. 2.29.6.25 Perimeter Trim: Provide optional perimeter trim with brushed brass finish. 10 31 00-39 2.29.6.26 Perimeter Trim: Provide optional perimeter trim with platinum finish.

2.29.7 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.29.7.1 Model: ______as manufactured by Superior Fireplaces. 2.29.7.2 Model: Series and model number as indicated on Drawings. 2.29.7.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.29.7.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.29.7.5 Accessories: Provide optional accessories as indicated on Drawings.

2.30 MANUFACTURED OUTDOOR GAS FIREPLACES - CUSTOM VRE4300 SERIES

2.30.1 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.30.1.1 Model: VRE43xxZEx, full model number as indicated on Drawings, Custom VRE4300 Series as manufactured by Superior Fireplaces. 2.30.1.2 Fuel Type: As indicated on Drawings. 2.30.1.3 Fuel Type: Natural gas. 2.30.1.4 Fuel Type: Propane/LP.

2.30.2 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.30.2.1 Model: VRE4336ZEN Custom Series as manufactured by Superior Fireplaces. 2.30.2.2 Fuel Type: Natural gas. 2.30.2.3 Rating (Variable): 39,500/50,000 BTU/hr.

2.30.3 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.30.3.1 Model: VRE4342ZEN Custom Series as manufactured by Superior Fireplaces. 2.30.3.2 Fuel Type: Natural gas. 2.30.3.3 Rating (Variable): 39,500/50,000 BTU/hr.

2.30.4 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.30.4.1 Model: VRE4336ZEP Custom Series as manufactured by Superior Fireplaces. 2.30.4.2 Fuel Type: Propane/LP. 2.30.4.3 Rating (Variable): 37,000/46,000 BTU/hr.

2.30.5 Vent-Free Gas Fireplace Systems: Traditional, front view style. 2.30.5.1 Model: VRE4342ZEP Custom Series as manufactured by Superior Fireplaces. 10 31 00-40 2.30.5.2 Fuel Type: Propane/LP. 2.30.5.3 Rating (Variable): 37,000/46,000 BTU/hr.

2.30.6 Fireplace Description: Stainless steel construction. 2.30.6.1 Compliance: Tested and approved under ANSI Z21.97 for outdoor applications. 2.30.6.2 Mounting: Flush face design. 2.30.6.3 Pilot Ignition: Electric, intermittent, battery backup ensures operation without power. 2.30.6.4 Description of Fire: Random, yellow flames with glowing, simulated embers. 2.30.6.5 Gas Control Valves: DEXEN Concealed, electronic gas control valves. 2.30.6.6 Log Grates, Burners and Fire Screens: Stainless steel. 2.30.6.7 Decorative Volcanic Stones: Unit comes standard with three bags of stones. 2.30.6.8 Replacement Stock: Provide ___ bags of decorative volcanic stones FDVS per unit in addition to standard amount included with each unit. 2.30.6.9 Refractory Liners: Provide interior paneling with White Stacked pattern. 2.30.6.10 Refractory Liners: Provide interior paneling with White Herringbone pattern. 2.30.6.11 Doors: Provide optional bi-fold brushed stainless steel doors. 2.30.6.12 Fireplace Covers: Provide optional stainless steel Outdoor Weather Covers. 2.30.6.13 Hoods: Provide optional fireplace hood kits, brushed stainless steel. 2.30.6.14 Drainpans: Provide optional drainpans.

2.30.7 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.30.7.1 Model: ______as manufactured by Superior Fireplaces. 2.30.7.2 Model: Series and model number as indicated on Drawings. 2.30.7.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.30.7.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.30.7.5 Accessories: Provide optional accessories as indicated on Drawings.

2.31 MANUFACTURED OUTDOOR GAS FIREBOXES - SIGNATURE VRE4500 SERIES

2.31.1 Vent-Free Gas Fireboxes: Traditional, front view style. 2.31.1.1 Model: VRE45xxxx, full model number as indicated on Drawings, Signature VRE4500 Series as manufactured by Superior Fireplaces. 2.31.1.2 Refractory Liners: Provide interior paneling, in pattern as indicated on Drawings.

10 31 00-41 2.31.2 Vent-Free Gas Fireboxes: Traditional, front view style. 2.31.2.1 Model: VRE4536RS Signature Series as manufactured by Superior Fireplaces. 2.31.2.2 Model: VRE4542RS Signature Series as manufactured by Superior Fireplaces. 2.31.2.3 Model: VRE4550RS Signature Series as manufactured by Superior Fireplaces. 2.31.2.4 Refractory Liners: Provide interior paneling with Red Stacked pattern.

2.31.3 Vent-Free Gas Fireboxes: Traditional, front view style. 2.31.3.1 Model: VRE4536RH Signature Series as manufactured by Superior Fireplaces. 2.31.3.2 Model: VRE4542RH Signature Series as manufactured by Superior Fireplaces. 2.31.3.3 Model: VRE4550RH Signature Series as manufactured by Superior Fireplaces. 2.31.3.4 Refractory Liners: Provide interior paneling with Red Herringbone pattern.

2.31.4 Vent-Free Gas Fireboxes: Traditional, front view style. 2.31.4.1 Model: VRE4536WS Signature Series as manufactured by Superior Fireplaces. 2.31.4.2 Model: VRE4542WS Signature Series as manufactured by Superior Fireplaces. 2.31.4.3 Model: VRE4550WS Signature Series as manufactured by Superior Fireplaces. 2.31.4.4 Refractory Liners: Provide interior paneling with White Stacked pattern.

2.31.5 Vent-Free Gas Fireboxes: Traditional, front view style. 2.31.5.1 Model: VRE4536WH Signature Series as manufactured by Superior Fireplaces. 2.31.5.2 Model: VRE4542WH Signature Series as manufactured by Superior Fireplaces. 2.31.5.3 Model: VRE4550WH Signature Series as manufactured by Superior Fireplaces. 2.31.5.4 Refractory Liners: Provide interior paneling with White Herringbone pattern.

2.31.6 Firebox Description: Stainless steel construction, fully insulated firebox. 2.31.6.1 Fuel Type: As indicated on Drawings. 2.31.6.2 Fuel Type: Natural gas. 2.31.6.3 Fuel Type: Propane/LP. 2.31.6.4 Compliance: Tested and approved under ANSI Z21.91 for outdoor applications. 2.31.6.5 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.31.6.6 Fire Screens: Stainless steel mesh. 2.31.6.7 Outside Air Kits: Provide optional Outside Air Kits as indicated on the Drawings. 2.31.6.8 Outside Air Kits: Provide optional AK4 Outside Air Kits (complete kit, collar, hood 10 31 00-42 and 36 inches (914 mm) of flex tube) for sidewall installation. 2.31.6.9 Outside Air Kits: Provide optional AK4F Outside Air Kits (collar and hood, compatible with 4 inch (102 mm) flex tube) for floor installation.

2.31.7 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.31.7.1 Model: ______as manufactured by Superior Fireplaces. 2.31.7.2 Model: Series and model number as indicated on Drawings. 2.31.7.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.31.7.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.31.7.5 Accessories: Provide optional accessories as indicated on Drawings.

2.32 MANUFACTURED OUTDOOR GAS FIREPLACES - CUSTOM VRE4543 SERIES

2.32.1 Vent-Free Gas Fireboxes: Contemporary style. 2.32.1.1 Model: VRE4543xx, full model number as indicated on Drawings, Custom VRE4543 Series as manufactured by Superior Fireplaces. 2.32.1.2 Fuel Type: As indicated on Drawings. 2.32.1.3 Fuel Type: Natural gas. 2.32.1.4 Fuel Type: Propane/LP. 2.32.1.5 View Style: As indicated on Drawings. 2.32.1.6 View Style: Front view units. 2.32.1.7 View Style: See-through units, provide optional LVOST Outdoor See-Thru Door Kits.

2.32.2 Vent-Free Linear Gas Fireplace Systems: Contemporary style. 2.32.2.1 Model: VRE4543EN Custom Series as manufactured by Superior Fireplaces. 2.32.2.2 View Style: As indicated on Drawings. 2.32.2.3 View Style: Front view units. 2.32.2.4 View Style: See-through units, provide optional LVOST Outdoor See-Thru Door Kits. 2.32.2.5 Fuel Type: Natural gas. 2.32.2.6 Rating (Variable): 25,000/39,000 BTU/hr.

2.32.3 Vent-Free Linear Gas Fireplace Systems: Contemporary style. 2.32.3.1 Model: VRE4543EP Custom Series as manufactured by Superior Fireplaces. 2.32.3.2

10 31 00-43 View Style: As indicated on Drawings. 2.32.3.3 View Style: Front view units. 2.32.3.4 View Style: See-through units, provide optional LVOST Outdoor See-Thru Door Kits. 2.32.3.5 Fuel Type: Propane/LP. 2.32.3.6 Rating (Variable): 29,000/37,000 BTU/hr.

2.32.4 Fireplace Description: Stainless steel construction. 2.32.4.1 Compliance: Tested and approved under ANSI Z21.97 for outdoor applications. 2.32.4.2 Description of Fire: Yellow flames, open linear configuration. 2.32.4.3 Operation: Units come standard with remote control systems. 2.32.4.4 Interior Lighting: Light assembly located underneath the burner assembly, each unit comes standard with two G9 120V/20W light bulbs. 2.32.4.5 Replacement Stock: Provide ___ G9 120V/20W light bulbs per unit in addition to standard amount included with each unit. 2.32.4.6 Weather Shield: Units come standard with glass weather shield. 2.32.4.7 Pilot Ignition: Battery backed-up intermittent electric ignition ensures operation during power failure. 2.32.4.8 Gas Controls: Concealed in fireplace floor, three flame settings for heat control. 2.32.4.9 Interior: Reflective interior finish. 2.32.4.10 Sediment Traps: Provide optional sediment traps between fuel supply and fireplace. 2.32.4.11 Equipment Shutoff Valves: Provide optional equipment shutoff valves with 1/8 inch (3.2 mm) NPT tap in lieu of test gauge connections.

2.32.5 Burners/Fire Kits: Provide vent-free burner systems with accessories. 2.32.5.1 Model: ______as manufactured by Superior Fireplaces. 2.32.5.2 Model: Series and model number as indicated on Drawings. 2.32.5.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.32.5.4 Glass Media Color: Series and model number as indicated on Drawings. 2.32.5.5 Glass Media Color: Standard, mint green glass. 2.32.5.6 Glass Media Color: Provide optional clear glass. 2.32.5.7 Glass Media Color: Provide optional blue glass. 2.32.5.8 Glass Media Color: Provide optional amber glass. 2.32.5.9 Glass Media Color: Provide optional speckled orange glass. 2.32.5.10 Replacement Stock: Provide ___ bags of glass media per unit, in color indicated 10 31 00-44 above, in addition to standard amount included with each unit. 2.32.5.11 Accessories: Provide manufacturer's standard accessories and optional ______. 2.32.5.12 Accessories: Provide optional accessories as indicated on Drawings.

2.33 MANUFACTURED OUTDOOR GAS FIREBOXES - SIGNATURE VRE6000 SERIES

2.33.1 Vent-Free Gas Fireboxes: Traditional, front view style. 2.33.1.1 Model: VRE60xxxx, full model number as indicated on Drawings, Signature VRE6000 Series as manufactured by Superior Fireplaces. 2.33.1.2 Interior Liners: Provide Mosaic Masonry Brick, pattern as indicated on Drawings.

2.33.2 Vent-Free Gas Fireboxes: Traditional, front view style. 2.33.2.1 Model: VRE6036RS Signature Series as manufactured by Superior Fireplaces. 2.33.2.2 Model: VRE6042RS Signature Series as manufactured by Superior Fireplaces. 2.33.2.3 Model: VRE6050RS Signature Series as manufactured by Superior Fireplaces. 2.33.2.4 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Stacked pattern.

2.33.3 Vent-Free Gas Fireboxes: Traditional, front view style. 2.33.3.1 Model: VRE6036RH Signature Series as manufactured by Superior Fireplaces. 2.33.3.2 Model: VRE6042RH Signature Series as manufactured by Superior Fireplaces. 2.33.3.3 Model: VRE6050RH Signature Series as manufactured by Superior Fireplaces. 2.33.3.4 Interior Liners: Provide Mosaic Masonry Brick, Warm Red Herringbone pattern.

2.33.4 Vent-Free Gas Fireboxes: Traditional, front view style. 2.33.4.1 Model: VRE6036IS Signature Series as manufactured by Superior Fireplaces. 2.33.4.2 Model: VRE6042IS Signature Series as manufactured by Superior Fireplaces. 2.33.4.3 Model: VRE6050IS Signature Series as manufactured by Superior Fireplaces. 2.33.4.4 Interior Liners: Provide Mosaic Masonry Brick, Ivory Stacked pattern.

2.33.5 Vent-Free Gas Fireboxes: Traditional, front view style. 2.33.5.1 Model: VRE6036IH Signature Series as manufactured by Superior Fireplaces. 2.33.5.2 Model: VRE6042IH Signature Series as manufactured by Superior Fireplaces. 2.33.5.3 Model: VRE6050IH Signature Series as manufactured by Superior Fireplaces. 2.33.5.4 Interior Liners: Provide Mosaic Masonry Brick, Ivory Herringbone pattern.

2.33.6 10 31 00-45 Firebox Description: Stainless steel construction, fully insulated. 2.33.6.1 Fuel Type: As indicated on Drawings. 2.33.6.2 Fuel Type: Natural gas. 2.33.6.3 Fuel Type: Propane/LP. 2.33.6.4 Compliance: Tested and approved under ANSI Z21.91 for outdoor applications. 2.33.6.5 Rating: BTU/hr determined by type of simulated log fire kit/burner. 2.33.6.6 Fire Screens: Stainless steel mesh. 2.33.6.7 Outside Air Kits: Provide optional Outside Air Kits as indicated on the Drawings. 2.33.6.8 Outside Air Kits: Provide optional AK4 Outside Air Kits (complete kit, collar, hood and 36 inches (914 mm) of flex tube) for sidewall installation. 2.33.6.9 Outside Air Kits: Provide optional AK4F Outside Air Kits (collar and hood, compatible with 4 inch (102 mm) flex tube) for floor installation.

2.33.7 Simulated Log Fire Kits: Provide vent-free burner systems with logs and accessories. 2.33.7.1 Model: ______as manufactured by Superior Fireplaces. 2.33.7.2 Model: Series and model number as indicated on Drawings. 2.33.7.3 Compliance: Tested and approved under ANSI Z21.11.2. 2.33.7.4 Accessories: Provide manufacturer's standard accessories and optional ______. 2.33.7.5 Accessories: Provide optional accessories as indicated on Drawings.

3 EXECUTION

3.1 EXAMINATION AND PREPARATION

3.1.1 Verify that field measurements, surfaces, substrates and conditions are as required, and ready to receive Work.

3.1.2 Prepare substrates using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.1.3 Do not proceed with installation until substrates have been properly prepared and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.

3.1.4 If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.

3.1.5 Verify volume of indoor combustion air is provided by method described in the National Fuel Gas Code, ANSI Z223.1/NFPA 54 - Air for Combustion and Ventilation, the International Fuel Gas Code, and applicable local codes. 10 31 00-46 3.2 INSTALLATION

3.2.1 Install units plumb, square, in proper alignment and secured to opening, within manufacturer's recommended tolerances. Comply with manufacturer's installation instructions and approved submittals.

3.2.2 Install in accordance with ANSI Z21.60 and the requirements of authorities having jurisdiction. Use manufacturer's guidelines for anchoring components and minimum clearances to combustibles, walls, and finishes.

3.3 TESTING AND ADJUSTING

3.3.1 Test for proper operation, including control and safety devices.

3.3.2 Adjust components within tolerances recommended by manufacturer and such that moving components operate smoothly without warp or bind.

3.4 CLEANING AND PROTECTION

3.4.1 Clean exposed surfaces. Touch up, refinish, or replace damaged components in a manner acceptable to Architect.

3.4.2 Protect installed products until completion of project.

3.4.3 Repair or replace defective work as directed by Architect upon inspection.

END OF SECTION

10 31 00-47