Resume for Mark F Pepke

Lessle E. Williams 1821 Holly bush Rd (912)-253-3081Home (601)-900-2972Cell Pelahatchie, Ms 39145 2naji [email protected]

Summary : Seeking a position to utilize my work experience and abilities with an established company offering advancement for measured achievement. Please accept the attached resume as an application for the position of operator that is currently available within your company. Specifically, I’m seeking to better utilize my talents in production performance, lead operations, quality control, and Forman’s management with leadership qualities. My background includes full responsibility of all duties associated with shipping and receiving, preventative maintenance. Hazardous chemical/material disposal and general maintenance. Some responsibilities include assisting career employees with their assigned tasks. My success thus far is a result of mu strong perseverance, strong work ethic and attention to detail. I’ve proven my abilities to communicate and work effectively with management and staff at all levels of experience. I acquire knowledge and new skills rapidly. I can adapt to any work environment.

Technical Skills Job Analysis Compliance: Worked on fisher 46/60 and rule-co stick pilots. Performed monthly inspections 15+ or-15% MMS Apr-14-C. Changed out differential spring range adjustments settings. Tested PSV module type Anderson Greenwood 200. Set pressure rating +2psi or -3% above separator pressure. Tested stainless Steele auto-clave SSV and FSV Wheatly type. Tested also leakage*200cc/min of liquid or 5 cubic feet gases. Worked on LSH/L fishers/Liquid, Gases). I’ve been on eight-pile platforms performing dehydration systems, such as changing out Tyco glycol pumps; filtration pumps and settles in the stack exhaust. Performed daily activities observing the gravity of oil separators and monitored BS & W LACT units. Sub-Sea Experience: Worked on Siemens simatic OP7LP header and HP reservoir sub-sea filtrations systems. I’ve changed out stainless Sigma HP regulator circle seal check valves (2349-4pp) from LLOG sub-sea explorations panels. I’m familiar with Rosemount Transmitters and solenoids switches. I regulated HP volume from P18014 (A) HPU systems (Acculamative PSV bottles). I’ve changed out the versa type valves (VSP3501-MS-155) I tested annulus sub-sea (CIL/AML) valves every 6 months on FMC panels. I managed testing sub-sea down-hole hydraulic self-equalize ball valve monthly according to MMS standards & supervised well completions fluids for Halliburton services hand

Databases: CTU Online experience development in Operations Management

Programming Languages: Basic Information Technology

Software: Microsoft Office Word, Excel & Power Point presentations

Operating Systems: Familiar with Netscape, Wonder-ware, Delta V operation systems & PLC logic. Professional Experience

 Flow Petroleum 8/2010-Present  Performed Sim-Ops Operations for Hilcorp Ship Shoal 209 Field  Qualified pumper operation for field operation on satellites Facilities

Company: Wood group/Baker Energy (Thunder Hawk FPU) 5/2006- 1/2010 Deepwater Spar (Front-Runner, Murphy-USA)  Rebuilt repairs chemical pumps &rotary screw type pumps on pipeline pumps with Kinetic features  Performed guidelines on TUTA topside of the umbilical system for down-hole procedure  Commissioning Project for Murphy Oil Thunder Hawk on Positive displacement pumps equipment  Worked on projects with optimum energy & SBM for PSV inspection & leak testing on separators  Advanced moderate procedures expecting Helium Leak testing on piping- performed duties with lead operations& collate shift engineers with tour handover data as per Prd-208 Senior Production OPS-4  Maintain observation, pre-walking down piping for PNID’s & ISO engineering manuals structures drawings on MFD’S/Performed active surveillance on Sub-sea training with Aker Solution Team  Worked on dehydration systems purging and flaring wells in the field & glycol fired heater units  Monitored the wonder ware PLC modules outputs testing MMS procedures projects on PSV devices  Performed proper well testing configurations gravity & morning reports performance of all devices  Worked under the Lead Operator & Head Gauger Learning Management support system for Control Room Operation on Delta -V systems/Maintain Work Over Completion wells stimulations for Energy 21/ Change out Ex-lines on Waukesha compressors & worked on changing out ring gasket on 1st,2nd, 3rd suction and discharge cylinders  Monitored pig launching for incoming and outgoing wells surveillance on pipeline systems  Position Control Room Operator Re-entry Specialists Supervising SIMOPS well completions  Field operations Garden Banks and ship-shoal area Troubleshoot relays and mechanical devices  Performed Level an Operations in the Garden Banks 72 area for Enterprise and L.L.O.G.  Maintained operational support logistics common for Sub-Sea 205 and 378 Wells  Worked on the dominion Contract for Ship Shoal 246 block Area as Night Man (OPS)  Sub-Sea Operator PLC experience 5 years start up Turbine Compressors& VRU’s  Performed flow backs and purge wells into separators for recycling in storage tanks  Performed Land well formations for Forest Oil Corporation and supervised wire-line Ops  Assists drilling Operations of flow back procedures on well schematics and completions fluids  Maintain well maintenance mud- line procedures and manual valves checks on flow lines  Mobilize gem-co units for wire-line operations due to well gas-lift procedures  Unloaded well bore zones due to fluid compact below the surface line

Company: Danos & Curole - 11/96 -2001 & 3/2002-9/2005  Maintained supervision on production activities including subcontractors  Position Field Operator Performance on daily reports on glycol pumps & Subsea wells systems  Maintain platform area at Main Pass 299 and Ewing Banks Deep Water 826 BP platform facility  Worked on the Genesis Spar as a maintenance contract Operator assistance  Contracted in the 299 Ship Shoal area as a production control room operator  formed maintenance on thermal oxidizers and diesel –engine generators with mechanics assistance &maintain water well injection rates on electrical production submersible pumps  Monitor and operated wide range process of high pressure turbine compressors, coolers, and heat- exchangers gas treatment installation  Completed knowledge competencies of gas train volume tracing piping and analyze the troubleshoot process to maintain the efficient facility operations on gas process equipment

EDUCATION Operations Management: Colorado Technical University Online (April 2009- Present)  Expected graduation April 2011  GPA: (4.0)  Relevant Coursework: Electrical Technology & IT Communications  Certifications for Louisiana Technical College  Core Compliance (Initial) Awareness Training-Annual Refresher (2)  Rigging with API Certification-TPC0020  Daily Safety management  Dangers of Pressure with Danos & Curole Best Practices Certifications:  Offshore Water Survival Technology, Consulting & Safety Specialists, Inc.  T-2 Level 4 Lead & A Baker Operational Assessment  US Coast Guard Advance Fire Fighting & Basic Fire Fighting Safety  24 Hour HAZWOPER Technician with OSHA requirements  Confined Space Entry Attendant Rescue  Training and Offshore Hydraulic Crane Operator/Rigger  PEC/Premier Card Certification, Danos & Curole Offshore  Safe Gulf PEC Premier Card & TWIC