Thinlac / Thinsol

THINNERS

THINLAC / THINSOL

THIN – CHEMIE offers a very comprehensive range of THINNERS. These are based on carefully selected pure solvents form well known original manufactures of solvents like IPCL, NOCIL, HPCL, BPCL, IOC etc and imported solvents. They have been blended to give the THINLAC & THINSOL range the best of properties in respect of SMELL, SOLVENCY, CUTTING POWER, EVAPORATION RATE, AZEOTROPY, ECONOMY etc resulting in the Smooth Finish, Excellent Flow, High Gloss of Paints and Superb Cutting Efficiency.

I. AIR DRYING THINNERS

SL.NO PRODUCT PROPERTIES EQVT. TO

1. THINSOL GP General Purpose Thinner _

2. THINSOL U Universal Thinner for Air Drying and Stoving Paints _

3. THINSOL QD Thinner for Quick Drying Enamels -

4. THINSOL 33 High Quality thinner for ICI Dulux Synthetic Enamels Thinner 61-33

5. THINSOL PS For Polystyrene Paints Approved by TVS

6. THINSOL PU For Polyurethane Paints Approved by TVS

II. N C THINNERS

1. THINLAC 70 Very fast evaporation, good Sheenlac D 13 cutting power & most economical

2. THINLAC 202 Medium with good cutting Dhirajlal’s 2002 power & good flow

2 SL.NO PRODUCT PROPERTIES EQVT TO

3. THINLAC 58 For primer surfaces and finishes Sheenlac SP 58 for good glow and gloss

4. THINLAC 606 High quality ICI Duco Thinner 60 - 6

5. THINLAC DA High Quality N.C Acrylic ICI Duco Super Acrylic Thinner

6. THINLAC DR High Quality Retarder ICI Duco Retarder 60-20 7. THINLAC 5667 NC IS 5667

8. THINLAC AC Anti- Chill IS 1873- 961& DTD 843

9. THINLAC AR High Quality Retarder Addisons Retarder F 2424 10. RETARDER General Purpose for use with economical N.C Thinners such as THINLAC 70

11. THINLAC EX For Polyurethane Lacquer Crepol Thinner used on TV Components of Bombay

12. THINLAC 76 For High impact Polystyrene Addisons Thinner 7676 Paints.

III STOVING THINNERS

1. THINSOL S Standard ICI 61 - 679

2. THINSOL 9020 Standard ICI 61 - 9020

3. THINSOL 1872 Stoving IS 1872

4. THINSOL TE High quality -

5. THINSOL DT Dipping Approved by Vinar

6. THINSOL ’ SE ‘ For Stoving Epoxy paints -

7. THINSOL ’ ES ‘ For Electrostatic paints Approved by TVS IV THINNERS FOR CHEMICAL RESISTANT PAINTS

SL.NO PRODUCT PROPERTIES EQVT TO

1. THINSOL CR For Chlorubber Paints ICI / ASIAN

2. THINSOL HCR For Hi- Build ICI / ASIAN Chlorubber Paints

3. THINSOL AE For Air drying Epoxy Paints ICI / ASIAN

4. THINSOL HAE For Hi- build Epoxy Paints ICI / ASIAN

V SPECIAL THINNERS

1. THINSOL CS Cleaning Solvent for paint Approved by TVS pipe lines, spray guns etc

2. THINSOL T For protective lacquers Approved by TVS for Cu, brass etc.

3. THINSOL ‘ K’ For thinning Chemphos 204 Approved by TVS

THINLAC / THINSOL can be formulated to meet any specification, individual requirement or special condition.

FURTHER INFORMATION

For further information on Special Oils, Coolants, Rust Preventives, Chemical Processes for Pretreatment of Metal Surfaces and Prevention of Corrosion, apply to the following.

CORPORATE OFFICE : THIN-CHEMIE FORMULATIONS ‘ BEJOYA ‘ 30, SCHOOL VIEW ROAD CHENNAI 600 028.

PHONE : 044 - 2493 8148

FAX NO : 044 – 2495 4012

E - MAIL : [email protected] [email protected]