Edit a Recording Select a recording for editing in one of two ways: In the My Recordings view, select the recording and click View/Edit Immediately after stopping a recording, the user will be taken to the View/Edit screen to view and/or edit the result In the View/Edit screen: Trim ("top 'n tail") Drag the left slider in to trim the front of the recording Drag the right slider in to trim the end of the recording Click the Apply Edits button * The trim(s) will be applied and the user will be returned to the My Recordings view. Cut a Segment Option 1: use playhead and marker buttons 1. The user positions the playhead on the section where they want the cut to start (e.g. 00:00:15) © 2009 Echo360, Inc. 63 2. Click the mark-in button. This will place the mark-in point at current playhead position. 3. The user positions the playhead on the section where they want the cut to end 4. Click the mark-out button. This will place the mark-out point at current playhead position. Option 2: drag marker sliders into position 1. Drag the left slider in to the start of the segment 2. Drag the right slider in to the end of the segment 1. Once they user is happy with their mark-in and mark-out points for the cut, they click the Cut button 2. The cut area(s) will appear grey on the timeline (see image below). Clearing Cuts To clear the last cut made, the user simply double-clicks on the grey cut area. © 2009 Echo360, Inc. 64 To clear all cuts made to the timeline, the user clicks the Clear Cuts button at the bottom of the application window. A popup appears asking for confirmation to clear all cuts from the recording. Click Clear all cuts. Reviewing Changes Use the playback control buttons to view and/or listen to the edited recording Saving Changes When clicking on Apply Edits, the user will be asked to confirm changes. Note: editing changes cannot be undone once the edits are applied. A popup will appear asking the user to confirm applying edits to the recording. Click OK. If the user is ready to upload their edited file, they click Publish Recording. If the user wants to discard their changes, they click Cancel. Clicking Apply Edits will return the user to the My Recordings screen. The recording will show a progress bar as the edits are applied. Once edits are complete, the status will change to 'Edited'. Clicking Publish will first apply the edits, then open a window asking the user to login to the ESS and provide information about which course they want to publish the recording to. Publish a Recording The user can select a recording for publication in one of two ways: In the My Recordings view of the Application, by selecting the recording in the list and click Publish Recording Immediately after completing a recording, the user will be taken to the View/Edit screen to view and/or edit the result. On this screen the user can click Publish.