USER MANUAL Thank you for choosing our company designed and developed series of glasses products, hope it can you help your life happiness and enjoy your life. Featuresx` 1.Quality UV sunglasses lens 2.5.0 mega pixels HD DV, high definition digital video recording. 3.support TF card 2GB –16GB optional (suggest to use branded high speed card ) 4.Easy connection with PC/Laptops, no driver needed. 5.Trendy and sports stylish design 6With remote control，easy operation. 7.Real time live recording for best memory and easy to share with friendly and family. Operation A.Power On Long press power on/off button for 3 seconds, after a beep sound, blue light will shine, after flashing twice then always bright. The unit turns into standby status. B.Video Record In standby mode, short press video record or the remote control video record key when point the control to the sun glasses receive position, after the beep is heard , the blue light rapidly flashingt, the unit starts recording, long press the record again, the blue light always bright, the machine stops recording and saves the recorded content, the unit runs into standby mode.

C.Take photo In standby mode, point the remote to the receive position, short press the camera button, the blue light will flash once after a beep sound, the unit completes a photo shoot and saves the contents , the blue light backs to always bright and backs to standby.

D. Sound Record In standby mode, point the remote to the receive position, short press the sound record button, the blue light will flash slowly after a beep sound, the unit starts to sound record, press the sound record button again, the blue light turns to be always bright, the unit stops sound recording and saves the contents , the unit then backs to standby. E Power off In standby mode, short press on/off button or control on/off button when point the control to the receive position. The blue light will go off, the unit goes into power off status. D.setting time The product has the function of time display on video file, the date and time will be shown on the image, To set or correct the date and time, for example: 1.Edit a text file according to the format of “2011.01.01 20:00:00”. 2.Connect the product to computer, save the modified file “time.txt”to the root directory of the product memory 3.Disconnect the product from computer, turn the product on, the time will be set up auto. Connecting PC or Laptop 1.Plug in USB to the device and then connect to PC or Laptop thru USB port. 2.The computer will recognize the newly added disk and shall install driver. After the driver installed, a new folder window will pop up, the folder saves the recorded media files. Battery and Charge If the machine does not start, usually there is no electricity in the battery, it’s time to recharge the machine. To ensure the best use and keep the battery for longer using. The first three battery charge should be at least 8-12 hours, but can not exceed more than 24 hours. You can use the included USB cable to charge from PC, you can also use the included power line connected to the USB for direct charging. It usually needs 3-4 hours to fully charge status, it is charging when the yellow LED flashes, when it finishes, the yellow led will go off. If the unit not use for a long time, please fully charge it before using. Storage The device support TFcard 2GB -16GB ,when memory is full , blue led bright . 4 Reset function In case of system broken down or hung up ,please reset the product , There is a small Reset hole, use a thin stick to press the Reset button inside the hole ,Restart the product ,It will work normally again. Specifications Product size 165*80*50mm Physical weight 75g special remote control(MINI) Read/write speed 1.5MBps-60MBps USB 2.0 Battery 500MAH Li-polymer Battery Power consumption <0.59W Memory Support TF card 2GB -16GB Resolution 1280*720 Format AVI Effective pixels 5 mega pixels Recording speed 30fps Work temp -5℃ -40℃ Storage temp -20℃ -80℃ Player:Windows Media Real player, Stormcodec, QuickTime Menu language: English and Chinese Operation system:Win98, Winme,Win XP, Win2000 Windows,Vista Windows7

Troubleshooting 1 can not boot Battery has no electricity, please charge.

2 unit no response to control Press the reset button to restore factory settings.

3 it does not recognize the unit when connecting to the PC. Check the USB cable, if the computer interface is loose, re- Replace the USB cable , activate the USB port, update the driver.

4 content can not be not saved Check whether the memory is full, delete unnecessary files.

4 turns off automatically after powered on low battery, please charge.