C.A.P. (Ceramic-Aluminum-Polyvinyl Chloride)

This revolutionary, lightweight material places a smooth heat-reflective layer against your body providing unmatched warmth and comfort. The outer vinyl layer provides superb flexibility while the middle layer provides ultimate strength and durability. Feather-light in comparison to any other Trilaminate suit on the market, the C.A.P. Inner Shell weighs less than 5 pounds without boots.

C.A.P. provides the strength of ceramics, the warmth of aluminum, and the flexibility of the polyvinyl. You'll be wearing a lighter weight undergarment for a given temperature when compared to any other competitor's suit.

In the July 1999 issue of Germany's leading diving publication, TAUCHEN Magazine, thermal images were taken of the C.A.P. covered with the Twin Shell PRO Outer Shell, and the DUI CF200 and JWL Drysuits. While the DUI performed extremely well showing very little heat loss, the Twin Shell PRO showed ZERO heat loss. In fact, the camera resolution had to be tuned to a much finer setting in order to see any heat loss at all through the C.A.P.

The C.A.P. also features our Super Latex seals. Words cannot adequately explain the tremendous resilience of these seals. You'll have to see them to believe just how strong they are. Super Latex is used in both the wrist and neck seals for latex seal and feel combined with unmatched strength.

C.A.P. also features our neoprene rubber insulated boots. Mobby's nepreneboot is extremely comfortable and warm. The shank is reinforced to handle the wear and tear of your fin pocket and features a non-skid deck sole.

Si-Tech valves are featured on the Inlet and Exhaust. The Inlet is 360 degrees rotational for ease and simplicity in moving from 1 configuration to another. The Exhaust Valve features the Mobby's Omni-Touch venting. Offering a full range of automatic venting, the Exhaust can also be easily manually vented by simply touching anywhere on the valve face. No need to "hunt" for a small exhaust button, Omni-Touch makes sure that you're able to vent manually when needed. C.A.P. is indeed the material of the future. You can have it TODAY! Used exclusively with our Twin Shell Series, the C.A.P. Inner Shell should never be dived without the selected Outer Shell. Twin Shell PRO

The POWER of TWO.

Combining the comfort of a trilaminate with the streamlining of a neoprene suit, the Mobby's patented Twin Shell Series takes Drysuit diving to the next level of comfort, fashion and durability. By combining an innovative Inner Shell with a protective Outer Shell, you'll now have the perfect suit for a wide range of diving applications.

The Twin Shell PRO features an Outer Shell constructed of 1000 denier Cordura Nylon. This Outer Shell acts as a protective "coverall" for the Inner Shell. As you are diving, any accidental scrapes or rubs are taken by the Outer Shell. The "dry" Inner Shell is completely protected.

The two shells are attached using industrial strength Velcro above and below the dryzipper as well as around both the inlet and exhaust valve ports. Since the two shells are joined, you don't have to worry about putting on "two" different suits. In fact, the only time that you will notice that there are two shells is when you want to replace your old Outer Shell with a brand new color or style. You KEEP your "drysuit" which is the Inner Shell and replace the Outer "coverall". An economical way to have a "brand new" suit.

And since the Outer Shell is OUTSIDE the enclosed "dry" airspace, you can easily modify the Outer Shell to meet your needs. Any seamstress can easily sew on extra pockets or loops. Better yet, have your Outer Shell embroidered with your name, your club's logo, or sew on your patches and show everyone your training achievements. The options are endless with the Twin Shell Pro.

The PRO also features U/V protective cuffs and collar for your Super Latex seals. A waist belt divides the internal airspace for a much smoother flow transition during the dive. Ankle straps also help to minimize the flow of air into the boots should you become inverted.

Once the Outer Shell's zipper is closed, the expensive Inner Shell dryzipper is completely protected against strain and abrasion.

The Twin Shell PRO is available in Black or in Red/Black.

Additional features include:

- Insulated Neoprene Rubber Boots - Zippered Pockets and Ankles - Reinforced Seat and Knees - 4 Year Limited Warranty - 360 degrees Rotational Inlet - Omni-Touch Exhaust

DD9101 Twin Shell PRO Black DD9007 Twin Shell PRO Red/Black