SECTION 08 53 13.00.Brickmould

(Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying Brickmould Vinyl Windows and their installation. The specifier needs to edit these guide specifications to fit the needs of each specific project. Contact a JELD-WEN® representative to assist in appropriate product selections. Throughout the guide specification, there are Specifier Notes to assist in the editing of the file. The term Architect is used throughout these guide specifications and may be revised to read “Design Professional”,” Engineer”, “Owner” or other appropriate designation as required for specific projects.

References have been made within the text of the specification to MasterFormat 2004 Section numbers and titles, specifier need to coordinate these numbers and titles with sections included for the specific project. Brackets []; “AND/OR”; and “OR” have been used to indicate when a selection is required, in most cases the first option is the standard feature, and optional features are indicted in brackets. Some options may require additional lead-time, if this is a considera- tion, contact a JELD-WEN® representative for assistance.)

(Specifier Note: Brickmould Vinyl Windows are only available in Midwest and southeastern por- tions of the United States which include AL, GA, IA, IL, IN, KY, MI, MN, MO, MS, NC, OH, PA, SC, TN, VA, WI, and WV. More information is available at www.jeld-wen.com or by contacting a JELD-WEN® representative.)

SECTION 08 53 13.00.Brickmould VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows

PART 1 - GENERAL

0.1 SECTION INCLUDES

A. Awning Windows

B. Casement Windows

C. Double-Hung Windows

D. Fixed, Radius and Geometric Windows

E. Horizontal Sliding Windows

F. Single-Hung Tilt Windows

G. Sliding Patio Doors

0.2 REFERENCES

A. American Architectural Manufacturer Association (AAMA)

1. ANSI/AAMA/NWWDA 101/I.S.2 /NAFS; Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors

Project Name/Project Number/5-Apr-18 08 53 13 - 1 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows B. National Fenestration Rating Council (NFRC)

1. NFRC 100; Procedure for Determining Fenestration Thermal Properties

2. NFRC 200; Solar Heat Gain Coefficient and Visible Transmittance

0.3 DESIGN REQUIREMENTS

A. Provide windows capable of complying with requirements indicated, based on testing manufacturer’s window that are representative of those specified and that are of test size required by ANSI/AAMA/NWWDA 101 I.S.2/NAFS.

(Specifier Note: Include window design pressure (DP) ratings as part of the performance requirements. Required DP will vary dependent on project site, the location in the building and window size. Coordinate DP with the Structural Engineer. DP ratings and related window size and style are available at www.jeld- wen.com or by contacting a JELD-WEN® representative.)

B. Structural Requirements – Provide windows capable of complying with requirements indicated:

1. Design pressure: [Insert value] [As indicated on drawings]

(Specifier Note: Include NFRC ratings as part of the performance requirements. NFRC ratings qualifying for the Energy Star program are based on the performance of the whole window assembly. Qualifying windows vary to fit the needs of different regions throughout the country. NFRC ratings and related JELD-WEN® window size and styles are available at www.jeld-wen.com or by contacting a JELD-WEN® representative.)

C. NFRC Requirements – Provide windows capable of complying with the following total window ratings:

1. U-Factor: [Insert value] in accordance with NFRC 100.

2. Solar Heat Gain Coefficient (SHGC): [Insert value] in accordance with NFRC 200.

3. Visible Transmittance (VT): [Insert value] in accordance with NFRC 200.

0.4 SUBMITTALS

A. Refer to Section [01 33 00 Submittal Procedures] [Insert section number and title].

B. Product Data: Submit window manufacturer current product literature, including installation instruction.

Project Name/Project Number/5-Apr-18 08 53 13 - 2 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows C. Samples: Provide finish samples for all products.

D. Quality Assurance Submittals

(Specifier Note: DELETE design data, test reports submittal requirements when propriety specification is used and can be held. MAINTAIN design data, test reports submittal requirement when other products may be submitted as substitution.)

1. Design Data, Test Reports: Provide manufacturer test reports indicating product compliance with indicated requirements.

2. Manufacturer Instructions: Provide manufacturer’s written installation instructions.

E. Closeout Submittals

1. Refer to Section [01 78 00 Closeout Submittals] [Insert section number and title].

0.5 QUALITY ASSURANCE

A. Certifications

(Specifier Note: JELD-WEN recommends that installers be trained for all projects. DELETE if installer training is not desired.)

1. Installer shall have successfully completed training through JELD- WEN’s Product Integrity Group approved installation method course.

B. Mock-ups

(Specifier Note: JELD-WEN® recommends mock-ups and installation audits for all projects. DELETE if mock-ups are not desired.)

1. Window mock-up shall incorporate surrounding construction, including wall assembly fasteners, flashing, and other related accessories installed in accordance with window manufacturer’s approved installation methods.

a. Mock-up size: [Insert size] [As indicated on drawings.] b. Mock-up may [not] remain as part of the work.

C. Pre-Installation Meeting 1. Refer to Section (01 31 19 Project Meetings) (Insert section number and title.)

0.6 DELIVERY, STORAGE AND HANDLING

Project Name/Project Number/5-Apr-18 08 53 13 - 3 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows A. Refer to Section [01 60 00 Product Requirements] [Insert section number and title].

B. Deliver windows materials and components in manufacturer’s original, unopened, undamaged containers with identification labels intact.

C. Store windows as recommended by manufacturer.

0.7 WARRANTY

A. Refer to Section [01 78 36 Warranties] [Insert section number and title].

(Specifier Note: DELETE warranty information not specific to project.)

(Specifier Note: SELECT lifetime warranty time period for owner occupied single- family residences only.)

B. Manufacturer standard warranty indicating that the window unit will be free from material and workmanship defects from the date of substantial completion for the time periods indicated below:

1. Window Unit: [Lifetime] [10 years]

(Specifier Note: SELECT warranty associated with the glazing types specified. Specialty glazing includes patterned and textured glass. Insulated glass that incorporates a specialty glass may be eligible for an extended warranty, but requires input from the manufacturer. Contact a JELD-WEN representative to discuss design options and their effect on the warranty.)

2. Glazing:

a. Insulated Glass: [Lifetime] [10 years] against seal breakage b. [Laminated Glass] [Specialty Glazing]: 5 years against delamination

PART 2 - PRODUCTS

(Specifier Note: Product information is proprietary to JELD-WEN®. If additional products are required for competitive procurement, contact JELD-WEN® for assistance in listing competitive products that may be available.)

0.1 MANUFACTURER

A. JELD-WEN® Windows and Doors; 3250 Lakeport Blvd. P.O. Box 1329; Klamath Falls, OR 97601-0268, USA; Phone 541.885.7412, fax 541.884.3331; Toll free 800.535. 3936; website www.jeld-wen.com

B. Basis of Design: Windows are based on the JELD-WEN®’s Vinyl Windows.

Project Name/Project Number/5-Apr-18 08 53 13 - 4 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows 0.2 MANUFACTURED UNITS

A. Frame 1. Jamb Depth a) Awning Windows: 3-3/8” (85.725mm) b) Casement Windows: 3-3/8” (85.725mm) c) Double- Hung Windows: 3-11/16” (93.6625mm) d) Fixed, Radius and Geometric Windows: 3-1/26” (77.7875mm) e) Horizontal Sliding Windows: 3-1/16” (77.7875mm) f) Single Hung Tilt Windows: 3-1/16” (77.7875mm)

B. Sash

(Specifier Note: DELETE thickness for styles not project specific.)

1. Thickness

a) Awning Windows: 2-1/4” b) Casement Windows: 2-1/2” c) Double-Hung Windows: 1-1/2” (38.1mm) d) Fixed, Radius and Geometric Windows: N/A e) Horizontal Sliding Windows: 1-1/2” (38.1mm) f) Single-Hung Tilt Windows: 1-1/2” (38.1mm)

C. Exterior Trim: Integral Brickmould J-channel

(Specifier Note: Drip cap option is not available on horizontal sliding windows. DELETE options not project specific.)

1. Options: [Extension Jamb Retainer] [Drywall Retainer] [Drip Cap]

(Specifier Note: Extension jambs are not available on fixed, radius and geometric windows. DELETE option if not project specific.)

D. Extension Jambs: Provide at all four sides of frame [4-9/16 inch] [6-9/16 inch]

E. Weatherstripping

(Specifier Note: DELETE weatherstripping for window styles not project specific.)

1. Awning Windows: .270 fin pile combined with foam filled bulb

2. Casement Windows: .270 fin pile combined with foam filled bulb

3. Double-Hung Windows: .270 fin pile

4. Fixed, Radius and Geometric Windows: N/A Fixed Only

5. Horizontal Sliding Windows: .279 fin pile

6. Single-Hung Tilt Windows: .270 fin pile

Project Name/Project Number/5-Apr-18 08 53 13 - 5 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows F. Hardware

(Specifier Note: Fixed radius and geometric windows are non-operable and have no hardware. DELETE Hardware for window styles not project specific.)

1. Awning Windows a) Hinges: [standard hardware] [option: coastal package] b) Operator: [standard rotary operator] [option: maxim opening hardware] c) Lock: Concealed multi-point lock d) Handle Profile (standard): Manual Folding Crank e) Finish: Color match frame extrusion

2. Casement Windows a) Lock: Concealed multi-point lock b) Handle Profile (standard): Manual Folding Crank c) Finish: Color match frame extrusion

3. Double-Hung Windows a) Balance: Block and Tackle Balance System b) Lock: Cam Lock c) Finish: Color match window frame extrusion

4. Horizontal Sliding Windows a) Sliding System: Nylon Roller or Guides b) Lock: [standard: WEN-Lock™] [option: Cam Lock] [option: Style Cam Lock] c) Finish: Color match window frame extrusion

5. Single-Hung Tilt Windows a) Balance: Block and Tackle Balance System b) Lock: Tilt latches and [standard: WEN-Lock™] [option: Cam Lock] [option: Style Cam Lock] c) Finish: Color match window frame extrusion

G. Glazing

(Specifier Note: Various types of glass are available. Regional availabilities may differ. The most common types have been included here. Contact a JELD-WEN® representative to verify availability or when other options are required. DELETE glass not project specific.)

(Specifier Note: Reflective glare from glazing has been found to affect the beach nesting of turtles in coastal environments. Some governing authorities require the use of turtle glass which uses tinted glass to achieve an industry-approved, inside- to-outside visible light transmittance value of 45% or less (visible spectrum = 400 to 700 nanometers). Verify the requirements for turtle glass with local authorities in coastal environments.)

1. Strength: [standard: Annealed] [options: [Laminated] [Tempered]

Project Name/Project Number/5-Apr-18 08 53 13 - 6 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows 2. Insulated Glass (standard): a) Two panes of glass utilizing a continuous roll formed stainless steel and dual seal sealant. b) Type: [standard: Type 1- Clear] [options: [Type 2 – Tinted [Azurlite] [Bronze] [Gray]] [Specialty Glass – Obscure] [Glue Chip] [Rain]] c) Coating Options: [Low E on surface 2]

0.3 WINDOW ACCESSORIES

(Specifier Note: Insect screens are not available on fixed radius and geometric windows. DELETE insect screens when only fixed, radius and geometric windows are specified.)

A. Insect Screens

1. Material: Charcoal fiberglass screen cloth set in painted roll formed aluminum frame.

a. Frame Finish: Color match window frame extrusion.

(Specifier Note: DELETE grille option if not desired.)

B. Grilles [Option: Grilles Between the Glass (GBG)] (Simulated Divided Lite (SDL)) 1. Simulated Divided Lites (SDL) a. Exterior Muntins 1) Material: Extruded aluminum contoured muntin permanently applied to exterior of insulating glass unit. 2) Pattern: As selected by Architect 3) Width: 7/8” (22.2 mm) 4) Finish: Match exterior finish OR

2. Grilles Between the Glass (GBG) a. Material: Make of roll formed aluminum suspended within the air cavity.

(Specifier Note: SELECT profile and width based on the desired aesthetic appearance. Utlize flat profile for a narrow aesthetic or contour profile for a wider aesthetic.) b. Profile: [Flat] [Contour] c. Pattern: As selected by Architect d. Width

(Specifier Note: for flat profile) [5/8 inch (16mm)] [7/8 inch (22mm)] OR (Specifier Note: for contour profile) [5/8 inch (16mm)] [1 inch (25mm)] e. Finish: Color match window frame extrusion.

Project Name/Project Number/5-Apr-18 08 53 13 - 7 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows 0.4 CONSTRUCTION ACCESSORIES

(Specifier Note: Construction accessories compatible with windows and required installation may be specified in this section or in related sections. COORDINATE with related sections to not duplicate information.)

A. Flashing

1. Refer to Section [04 20 00 Unit Masonry] [07 60 00 Flashing and Sheet Metal] [Insert section number and title].

B. Sealants

1. Refer to Section [07 92 00 Joint Sealants] [Insert section number and title]. OR

(Specifier Note: For sealants specified within this section list recommended products.)

2. Provide manufacturer recommended sealants to maintain watertight conditions.

3. Products:

a. [Insert products and manufacturer]

0.5 FABRICATION

A. General:

(Specifier Note: DELETE fabrication for window styles not project specific.)

B. (Awning Windows) (Casement Windows) (Horizontal Rolling Windows) (Single Hung Tilt Windows)

1. Frame: Heat fusion welded corners

2. Sash: Heat fusion welded corners

3. Glass: Mounted with silicone glazing compound and /or glazing tape

C. Fixed, Radius and Geometric Windows

1. Frame: Heat fusion welded corners

2. Glass: Mounted with silicone glazing compound and/or glazing tape

Project Name/Project Number/5-Apr-18 08 53 13 - 8 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows 0.6 FINISH

1. Color: [standard: White] [option: Desert Sand]

PART 3 - EXECUTION

0.1 GENERAL

A. Install windows in accordance with manufacturer’s installation guidelines and recommendations.

0.2 EXAMINATION

A. Inspect window prior to installation.

B. Inspect rough opening for compliance with window manufacturer recommendations. Verify rough opening conditions are within recommended tolerances.

0.3 PREPARATION

A. Prepare windows for installation in accordance with manufacturer’s recommendations.

0.4 INSTALLATION

A. Insert window into rough opening:

1. Shim side jambs straight. 2. Inspect window for square, level and plumb. 3. Fasten window through jamb, shim and into rough opening jamb. 4. Test and adjust for smooth operation of window. 5. Ensure weep holes are clear of debris for proper drainage.

0.5 CLEANING

A. Remove Preserve® film from glass.

B. Clean the exterior surface and glass with mild soap and water.

0.6 PROTECTION

A. Protect installed windows from damage.

Project Name/Project Number/5-Apr-18 08 53 13 - 9 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows 0.7 SCHEDULES

(Specifier Note: Below are sample schedules that require editing for specific project. When a single type of window is utilized on a project, specifier may elect to delete the schedule in its entirety. When schedules are included on the drawings, schedule should be deleted from the specification.)

A. Window Type A

1. Style: Single-Hung Tilt 2. Operation: Operable 3. Size: 22” x 30” 4. Exterior Finish: Desert Sand 5. Exterior Trim: standard, Drip cap 6. Extension Jamb: 4-9/16 inch 7. Hardware: Cam Lock 8. Hardware Finish: Desert Sand 9. Glazing: standard, Tempered, Low-E 10. Screen Finish: Desert Sand 11. Grilles: 5/8” Flat Profile

END OF SECTION

Project Name/Project Number/5-Apr-18 08 53 13 - 10 VINYL WINDOWS JELD-WEN® Brickmould Vinyl Windows