Product Guide Specification s7

MarchJuly, 2017

Product Guide Specification

Section 28 21 00: Video Surveillance Section 28 21 13: IP Cameras

IR MEGAPIXEL VARIFOCAL VARIFOCAL BULLETEYEBALL – 12 68 MP OUTDOOR NETWORK CAMERA

PART 1 – GENERAL

1.1 SUMMARY

1.A.Section Includes 1.A.1. Section 28 21 17: Video Surveillance – Surveillance Cameras – Camera Housings 1.A.2. Section 28 21 19: Video Surveillance – Surveillance Cameras – Camera Mounts 1.A.3. Section 28 27 00: Video Surveillance – Video Surveillance Sensors

1.B. Related Sections 1.B.1. [Section 28 33 15: Security Detection, Alarm and Monitoring – Security Monitoring and Control – Security Monitoring and Control Software].

**********Specifier’s note: Include those standards referenced elsewhere in this SECTION.

Project Name/Project #/5-31-18 28 21 13 - 1 IP Cameras 1.2 REFERENCES

2.A.Federal Communications Commission (FCC) (www.fcc.gov) 2.A.1. (SEFD1509190-B

2.B. Underwriters Laboratories, Inc. (UL) (www.ul.com) 2.B.1. E234884-A60-UL

2.C. CONFORMITE EUROPEENNE 2.C.1. EN60950:2000

2.D.Bureauveritas(www.bureauveritas.com) 2.D.1. EN50155:2007

2.E. E-mark(www.tuv.com) 2.E.1. ECE-Regulation NO.10

2.F. HD standards 2.F.1. Complies with the SMPTE 2036-1:2014 Strandard in: 2.F.1.a. Resolution: 3840x2160 2.F.1.b. Scan: Progressive 2.F.1.c. Color representation: complies with ITU-R BT.709 2.F.1.d. Aspect ratio: 16:9 2.F.1.e. Frame rate: 25 and 30 frames/s 2.F.2. Complies with the SMPTE 274M-2008 Standard in: 2.F.2.a. Resolution: 1920x1080 2.F.2.b. Scan: Progressive 2.F.2.c. Color representation: complies with ITU-R BT.709 2.F.2.d. Aspect ratio: 16:9 2.F.2.e. Frame rate: 25 and 30 frames/s 2.F.3. Complies with the 296M-2001 Standard in: 2.F.3.a. Resolution: 1280x720 2.F.3.b. Scan: Progressive 2.F.3.c. Color representation: complies with ITU-R BT.709 2.F.3.d. Aspect ratio: 16:9 2.F.3.e. Frame rate: 25, 30, 50 and 60 frames/s 2.F.3.f. Interference-Causing Equipment Standards

Project Name/Project #/5-31-18 28 21 13 - 2 IP Cameras 1.3 SYSTEM DESCRIPTION

3.A.Section Includes 3.A.1. Video Surveillance – Surveillance Cameras – IP Cameras

3.B. Performance Requirements 3.B.1. The IR BulletEyeball camera shall be a full-featured 12MP68MP unit designed for discrete video surveillance applications in indoor and outdoor environments. 3.B.2. The IR BulletEyeball camera shall offer a mechanical day/night IR cut filter that delivers color images during daylight and automatically switches to a monochrome image as the scene darkens. 3.B.3. The IR BulletEyeball camera shall be a high performance 1/1.72.5-in. progressive-scan day/night CMOS sensor with 12MP68MP resolution. 3.B.4. The IR BulletEyeball camera shall support 12V DC12V DC power supply. the following dual, redundant power options: 3.B.4.a. 12 VDC. 3.B.4.b. PoE (IEEE 802.3at). 3.B.4.c. The IR Bullet camera shall default to use power from PoE power supply, if connected. 3.B.4.d. The IR Bullet camera shall reboot and switch to the 12 VDC power supply if power from the PoE supply is lost. 3.B.5. The IR BulletEyeball camera shall offer Wide Dynamic Range for clear images in extreme high-contrast environments. 3.B.6. The IR BulletEyeball camera shall provide direct network connection using smart H.265 , H.265, smart H.264 and H.264 compression and bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality. 3.B.7. The IR BulletEyeball camera shall conform to the ONVIF profile S&G and CGI standards to provide interoperability with other conformant systems. 3.B.8. The IR BulletEyeball camera shall offer three (3) separate and configurable streams with one (1) individually configurable 12MP68MP stream at 1 to 301512 fps or 4K (3840x2160) at 1 to 30 fps. 3.B.9. The IR BulletEyeball camera shall have a Vari focal length from 4.12.7mm to 16.42mm . 3.B.10. The IR BulletEyeball camera shall offer Smart IR that provides integrated infrared illumination to capture images in low light or total darkness at a distance of 50.0 m (164 ft).

Project Name/Project #/5-31-18 28 21 13 - 3 IP Cameras 3.B.11. The IR BulletEyeball camera shall offer: 3.B.11.a. IP67 environmental protection 3.B.11.b. IK10 vandal resistance 3.B.11.c. 4 KV lightning rating 3.B.11.d. 3.B.12. The IR Bullet camera shall offer 2ch alarm in & 1ch alarm out. 3.B.13. The IR BulletEyeball domeEyeball camera shall offer 1ch built-in micline- in audio & 1ch line-out with G.711 AAC audio codec. 3.B.14. The IR BulletEyeball camera shall offer micro SD slot maximum support 128GB storage capability.

3.B.15. The IR Bullet camera housing shall be a durable, rugged design with an acrylic bubble.

1.4 SUBMITTALS

4.A.Submit under provisions of Section [01 33 00.]

4.B. Product Data: 4.B.1. Manufacturer’s data, user and installation manuals for all equipment and software programs including computer equipment and other equipment required for complete video management system.

4.C. Dimensional Drawings; include 4.C.1. Overall device dimensions. 4.C.2. Dimensions specific for installation.

4.D.Closeout Submittals 4.D.1. User manual. 4.D.2. Parts list. 4.D.3. Maintenance requirements.

1.5 QUALITY ASSURANCE

5.A.Manufacturer: 5.A.1. Minimum of [10] years of experience in manufacture and design Video Surveillance Devices.

5.B. Video Surveillance System: 5.B.1. List certifying bodies (UL, etc.) 5.B.2. Provide evidence of compliance upon request.

5.C. Installer: 5.C.1. Minimum of [5] years of experience installing Video Surveillance System.

Project Name/Project #/5-31-18 28 21 13 - 4 IP Cameras 1.6 DELIVERY, STORAGE AND HANDLING

6.A.Comply with requirements of Section 01 60 00.

6.B. Deliver materials in manufacture’s original, unopened, undamaged containers; and unharmed original identification labels.

6.C. Protect store materials from environmental and temperature conditions following manufacturer’s instructions.

6.D.Handle and operate products and systems according to manufacturer’s instructions.

1.7 WARRANTY

7.A.Provide manufacturer’s warranty covering [23] years for replacement and repair of defective equipment. Warranty varies country to country.

1.8 MAINTENANCE

8.A.Make ordering of new equipment for expansions, replacements, and spare parts available to dealers and end users.

8.B. Provide factory direct technical support via phone and e-mail.

Project Name/Project #/5-31-18 28 21 13 - 5 IP Cameras PART 2 – PRODUCTS

2.1 MANUFACTURERS

1.A.[Acceptable Manufacturer: Zhejiang Dahua Technology Co.,Ltd No.1199,Bin’an Road,Binjiang District,Hangzhou Tel: +86 571 8768-8883 Fax: +86 571 8768-8815 Email: [email protected]

1.B. Substitutions: [Not permitted.] [Under provisions of Division 1.] 1.B.1. [All proposed substitutions must be approved by the Architect or Engineer professional.] 1.B.2. [Proposed substitutions must provide a line-by-line compliance documentation.]

2.2 IR MEGAPIXEL BULLETEYEBALL - 2MP68MP INDOOR/OUTDOOR NETWORK CAMERA – [DH-IPC-HDBW4231FP-M12 2.8mmHFDW8658301ERP-ZE] [DH-IPC- HDBW4231FP-M12 3.6mmFDW8658301ERN-ZE] [DH-IPC-HDBW4231FP-M12 6mm]

2.A.General Characteristics: 2.A.1. The IR BulletEyeball camera shall be a full-featured 2MP68MP unit designed for discrete video surveillance applications in indoor and outdoor environments. 2.A.2. The IR BulletEyeball camera shall offer a mechanical day/night IR cut filter that delivers color images during daylight and automatically switches to a monochrome image as the scene darkens. 2.A.3. The IR BulletEyeball camera shall be a high performance 1/1.72.52.8-in. progressive-scan day/night CMOS sensor with an effective pixel rating of 307238401920 x 96020482160. 2.A.4. The IR BulletEyeball camera shall support 12V DC12V DC power supply. the following dual, redundant power options: 2.A.4.a. 12 VDC. 2.A.4.b. PoE (IEEE 802.3af). 2.A.4.c. The IR Bullet camera shall default to use power from PoE power supply, if connected. 2.A.4.d. The IR Bullet camera shall reboot and switch to the 12 VDC power supply if power from the PoE supply is lost. 2.A.5. The IR BulletEyeball camera shall offer Digital Wide Dynamic Range for clear images in extreme high-contrast environments. 2.A.6. The IR BulletEyeball camera shall provide direct network connection using smart H.265 ,H.265,smart H.264 and H.264 compression and bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality. 2.A.7. The IR BulletEyeball camera shall conform to the ONVIF Profile S&G and CGI standards to provide interoperability with other conformant systems.

Project Name/Project #/5-31-18 28 21 13 - 6 IP Cameras 2.A.8. The IR BulletEyeball camera shall offer two three (23) separate and configurable streams with one (1) individually configurable 1.3 MP68MP stream at 1 to 30 3015 fps. . 2.A.9. The IR BulletEyeball camera shall have a fixed vari focal length of [2.8 mm] [3.6 mm].from 4.12.7mm to 16.412mm. 2.A.10. The IR BulletEyeball camera shall offer Smart IR that provides integrated infrared illumination to capture images in low light or total darkness at a distance of 3050.0 m (98 164 ft). 2.A.11. The IR BulletEyeball camera shall offer: 2.A.11.a. IP67 environmental protection 2.A.11.b. IK10 vandal resistance 2.A.11.c. 4KV lightning rating 2.A.11.d. 2.A.11.e. 2.A.12. The IR Bullet camera shall offer 2ch alarm in & 1ch alarm out. 2.A.13. The IR BulletEyeball domeEyeball camera shall offer 1ch built-in micline- in audio & 1ch line-out with G.711 AAC audio codec. 2.A.14. The IR BulletEyeball camera shall offer micro SD slot maximum support 128GB storage capability. The IR Bullet camera housing shall be a durable, rugged design with an acrylic bubble.

2.B. Imaging 2.B.1. The IR BulletEyeball camera shall offer a 1/1.72.52.8-inch type CMOS progressive-scan imager. 2.B.2. The IR BulletEyeball camera shall offer an effective number of pixels of 1920 30723840 x 204821601280 effective picture elements. 2.B.3. The IR BulletEyeball camera shall offer a 163:29 aspect ratio or 16:9 aspect ratio. 2.B.4. The IR BulletEyeball camera shall offer a fixed vari focal length from 4.12.7mm to 16.412mm.of [2.8 mm] [3.6 mm] [6 mm]. 2.B.5. The IR BulletEyeball camera shall have a [86110110°] ~[354087°] horizon[51°] field of view. 2.B.6. The IR BulletEyeball camera shall offer a maximum aperture of F1.5342.0. 2.B.7. The IR BulletEyeball camera shall produce a color image with a minimum scene illumination of 0.02509 lux at F1.534 (Color,1/3s,30IRE) , 0.2 lux at F1.4 (Color,1/30s,30IRE) 2.0 and a monochrome image, when in the night mode, with a minimum illumination of 0 lux at F1.5342.0. 2.B.8. The IR BulletEyeball camera shall produce an image at 0 lux when in IR mode.

Project Name/Project #/5-31-18 28 21 13 - 7 IP Cameras 2.C. Video Characteristics 2.C.1. The IR Bullet shall broadcast a video data signal via a Wi-Fi (IEEE802.11b/g/n) network. 2.C.2. The IR BulletEyeball camera shall offer CBR/VBR bit rate control. 2.C.3. The IR BulletEyeball camera shall offer the following video compression protocols 2.C.3.a. Smart H.265 2.C.3.b. H.265 2.C.3.c. Smart H.264 2.C.3.d. H.264 2.C.4. The IR BulletEyeball camera shall offer BLC, HLC, and DWDR modes of backlight compensation. 2.C.5. The IR BulletEyeball camera shall offer Auto, Sunny, Night, Outdoor, and Customized white balance modes. 2.C.6. The IR BulletEyeball camera shall offer 3D DNR noise reduction. 2.C.7. The IR BulletEyeball camera shall offer 4 privacy masking areas. 2.C.8. The IR BulletEyeball camera shall offer motion detection (four zones) and region of interest (four zones) controls. 2.C.9. The IR BulletEyeball camera shall offer 16x digital zoom. 2.C.10. 2.D.Streaming Capability 2.D.1. The IR BulletEyeball camera shall generate 2MP68MP resolution using H.265 compression. 2.D.2. The IR BulletEyeball camera shall offer Unicast and Multicast streaming methods. 2.D.3. The IR BulletEyeball camera shall offer the following resolution streams: 2.D.3.a. 4K (3840 × 2160 pixels) 2.D.3.b. 6MP (3072 × 2048 pixels) 2.D.3.c. 5MP (3072 x 1728 pixels) 2.D.3.d. 5MP (2592 x 1944 pixels) 2.D.3.e. 4MP (2688 x 1520 pixels) 2.D.3.f. 3MP (2048 x 1536 pixels) 2.D.3.g. 3MP (2304 x 1296 pixels) 2.D.3.h. FHD (1920 x 1080 pixels) 2.D.3.i. 1.3MP (1280 x 960 pixels) 2.D.3.j. 720P (1280 x 720 pixels) 2.D.3.k. D1 (704 x 576 pixels/704 x 480 pixels) 2.D.3.l. VGA (640 x 480 pixels) 2.D.3.m. CIF (352 x 288 pixels/352 x 240 pixels) 2.D.3.n. 2MP6MP (30721280 × 20481280 pixels) 2.D.3.o. 2.D.3.p. 5MP (2560 x 1920 pixels)1.3MP(1280 × 960 pixels) 2.D.3.q. FHD 108720p60 (19201280 x 108720 pixels) 2.D.3.r. VGA (640 x 480 pixels) 2.D.4. The IR BulletEyeball camera shall generate three two (32) streams at the following maximum resolutions: 2.D.4.a. Main Stream: 682 MP at 301560 fps

Project Name/Project #/5-31-18 28 21 13 - 8 IP Cameras 2.D.4.b. Sub Stream 1: D1/ at 25/30 fps 2.D.4.c. Sub Stream 2: 2MP720P/ at 60 25/30 fps

2.E. IP Connectivity 2.E.1. The IR BulletEyeball camera shall allow full camera control and configuration capabilities via a TCP/IP network. 2.E.2. The IR BulletEyeball camera shall deliver 2 68MP video, at rates up to 60 3015 frames per second via TCP/IP over an RJ-45 (10/100/1000 Base-T) connection. 2.E.3. The IR BulletEyeball camera shall conform to the ONVIF Profile S&G and the CGI standard. 2.E.4. The IR BulletEyeball camera shall offer Quality of Service (QoS) configuration options. 2.E.5. The IR BulletEyeball camera shall support the IPv6 internet-layer protocol for packet switched internetworking across multiple IP networks. 2.E.6. The IR BulletEyeball camera shall support the following protocols: IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP,ARP, RTSP, UDP, UPnP, ICMP, IGMP, SNMP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, Bonjour, and 802.1x. 2.E.7. The IR BulletEyeball camera shall support the Smart PSS and DSS management software. 2.E.8. The IR BulletEyeball camera shall support the Android and the IOS mobile operating systems.

2.F. Installation Requirements 2.F.1. The IR BulletEyeball camera shall be capable of operating in an outdoor environment within a temperature range of –30° C to +60° C (–22° F to 140° F). 2.F.2. The IR BulletEyeball camera shall accept power, transmit video, and accept control via a TCP/IP connection. 2.F.3. The IR BulletEyeball camera shall support 12V DC12V DC power supply. the following dual, redundant power options: 2.F.3.a. 12 VDC. 2.F.3.b. PoE (IEEE 802.3af). 2.F.3.c. The IR Bullet camera shall default to use power from PoE power supply, if connected. 2.F.3.d. The IR Bullet camera shall reboot and switch to the 12 VDC power supply if power from the PoE supply is lost.

2.G.Housing Options 2.G.1. The IR BulletEyeball camera shall be offered in a metal housing. 2.G.2. The IR BulletEyeball camera housing shall conform to the IP67 standard for a weather-resistant package. 2.G.3. 2.G.4. The IR Bullet camera housing shall conform to the IK10 standard for vandal resistance.

Project Name/Project #/5-31-18 28 21 13 - 9 IP Cameras 2.3 ACCESSORIES

3.A.The IR BulletEyeball camera shall offer the following optional accessories: 3.A.1. Optional mounting hardware: 3.A.1.a. [Junction box] 3.A.1.b. [Wall mount bracket] 3.A.1.c. [Pole mount bracket] [Junction box] [Wall mount bracket] [Corner mount bracket]

Project Name/Project #/5-31-18 28 21 13 - 10 IP Cameras PART 3 – EXECUTION

3.1 EXAMINATION

1.A.Examine areas to receive devices and notify adverse conditions affecting installation or subsequent operation.

1.B. Do not begin installation until unacceptable conditions are corrected.

3.2 PREPARATION

2.A.Protect devices from damage during construction.

3.3 INSTALLATION

3.A.Install devices in accordance with manufacturer’s instruction at locations indicated on the floor drawings plans.

3.B. Perform installation with qualified service personnel.

3.C. Install devices in accordance with the National Electrical Code or applicable local codes.

3.D.Ensure selected location is secure and offers protection from accidental damage.

3.E. Location must provide reasonable temperature and humidity conditions, free from sources of electrical and electromagnetic interference.

3.4 FIELD QUALITY CONTROL

4.A.Test snugness of mounting screws of all installed equipment.

4.B. Test proper operation of all video system devices.

4.C. Determine and report all problems to the manufacturer’s customer service department.

3.5 ADJUSTING

5.A.Make proper adjustment to video system devices for correct operation in accordance with manufacturer’s instructions.

5.B. Make any adjustment of camera settings to comply with specific customer’s need.

3.6 DEMOSTRATION

Project Name/Project #/5-31-18 28 21 13 - 11 IP Cameras 6.A.Demonstrate at final inspection that video management system and devices functions properly. END OF SECTION

Project Name/Project #/5-31-18 28 21 13 - 12 IP Cameras