Direct Mail Template

3933 US Route 11 Cortland, NY 13045

Telephone: 1-607-758-6711 Facsimile: 1-607-758-1045 www.intertek-etlsemko.com

Letter Report number 3125558CRT-010 November 1, 2007

Manufacturer Atlantis Energy Systems. Module MegaSlate Nameplate Power 120 W

The information below will enable you, the manufacturer, to complete the required forms from the California Energy Commission in order for your MegaSlate modules to be included in the list of ”eligible renewable equipment” The CEC submittal forms can be obtained at: http://www.consumerenergycenter.org/erprebate/documents/EQUIPMENT_REQUEST.DOC

Symbol Value Units Maximum Power Pmp 117.0 Watts Voltage at Maximum Power Vmp 17.7 Volts Current at Maximum Power Imp 6.6 Amps Open Circuit Voltage Voc 24.0 Volts Short Circuit Current Isc 7.5 Amps Nominal Operating Cell Temperature NOCT 49.6 °C Temperature Coefficients at Voc ß Voc -0.347 %/°C at Vmp ß Vmp -0.488 %/°C at Isc α Isc 0.017 %/°C at Imp α Imp -0.022 %/°C

at Pmp g Pmp -0.506 %/°C Voltage at NOCT* VNOCT - Volts Current at NOCT* INOCT - Amps Voltage at Maximum Power Vlow - Volts and Low Irradiance* Current at Maximum Power Vlow - Amps and Low Irradiance* * Optional until Jan 1, 2008

The NOCT and power temperature coefficients were determined in accordance with the methods of IEC 61215-2005. These measurements were made at the Florida Solar Energy Center during October 2007 as part of Intertek project number 3125558.

Thomas R. Brown Title: Engineering Team Leader

Signature:

An Independent Organization Testing for Safety and Performance Page 1 of 1

This report is for the exclusive use of Intertek’s Client and is provided pursuant to the agreement between Intertek and its Client. Intertek’s responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report by itself does not imply that the material, product or service is or has ever been under an Intertek certification program.