Sensi-Care Adhesive Releaser Spray
Total Page：16
File Type：pdf, Size：1020Kb
Sensi-Care Adhesive Releaser Spray Information sheet/Protocol for Use What is it?
The Sensi-Care Adhesive Releaser Spray is a product that releases the adhesive bond, providing patient friendly way to release adhesives including tape, ostomy appliances, steri-strips, and Tegaderm. It is alcohol free, fragrance free, dye free, sting free, Latex free and hypoallergenic. The skin will be free of residue after use. The spray is 100% Silicone. The contents of the container are sterile (150 ml can).
Who can use it?
The Sensi-Care Adhesive Releaser Spray is safe for all ages. The spray can be used to release nearly all adhesives, and is safe to release Central Line/PICC Line dressings.
How is it used?
Spray Sensi-Care Adhesive Releaser directly onto the edge of the adhesive to be released, wait a few seconds (approximately 4-5). Gently peel the adhesive away from the skin, may use additional spray if necessary. The spray dries in seconds, and once dry will not affect the adhesion of subsequent dressings/appliances or the current dressing/tape should it need to be reapplied.
If the adhesive:
-is on the patient’s face
- is near an artificial airway or mucous membrane
-OR-
-if the patient is on isolation:
Spray Sensi-Care Adhesive Releaser into a clean medicine cup, scoop the product out with a cotton- tipped applicator, and apply.
Once the spray can container is empty, it is safe to dispose of in the regular trash.
The spray can container cannot be tubed via the pneumatic tube system.
The spray can container should not be left in a patient’s room; it must remain in the medication room for multiple patient uses.
The spray can container should be cleaned using disinfectant wipes (Sani-Wipe) after each patient use.