Openeye Oe3-E240 and E120 Recorders

A&E SPECIFICATIONS

OPENEYE OE3-E240 AND E120 RECORDERS

1. SUMMARY

1.01 SUMMARY 1. The OE3 E-Series recorder shall be a reliable digital recording system designed to accept input from standard CCTV cameras and convert that signal to a digital image and securely store video on an internal hard disk drive (HDD). The E-=Series recorder shall have the ability to allow authorized users to access video, playback and setup features remotely over LAN/WAN connections using OpenEye proprietary software.

2. SPECIFICATIONS

2.01 GENERAL SPECIFICATIONS 1. The Digital Recorder shall have a processor built on ARM architecture of 250MHz,with 128MB of DDR RAM, and an internal 100/1000 Network Interface. 2. The Digital Recorder shall have a VGA monitor output and a BNC monitor output on all models. 3. The Digital Recorder shall operate on an Embedded Linux platform. 4. The digital recorder shall be housed in a 2U chassis designed to fit into a 19” EIA rack using the included rack mount kit. 5. The 8 and 16 channel models of the Digital Recorder shall offer the following onboard storage options with two internal HDDs: a. 4.0 Terabytes b. 2.0 Terabytes c. 1.0 Terabytes d. 500 Gigabytes 6. The 4 channel models of the Digital Recorder shall offer the following onboard storage options with one or two internal HDDs: a. 1.0 Terabytes b. 500 Gigabytes

7. The digital recorder shall provide 4, 8, or 16 video camera inputs, depending on model, at a minimum system wide recording rate of 120 images per second (IPS) for the 4 channel models and 240 IPS for 8 and 16 channel models. 8. The digital recorder shall have an equivalent number of looping video outputs to the number of video inputs available. The 16 channel models shall include BNC Dongles used for looping outputs. Looping outputs shall also have 75 Ohm auto-termination. 9. The digital recorder shall have an Instant Backup function that will create a backup, with minimal interaction from the user, or the most recent 30 minutes of recorded data across all channels. 10. The digital recorder shall allow up to 5 users to connect via local network (LAN) or, when properly configured, internet connections (WAN) simultaneously.

1 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30105 Rev AD 11. The digital recorder multiplexer portion of the system shall allow for various viewing/recording configurations of full-screen single channel, 4, 9, or 16 cameras and a picture in picture (PIP) option. 12. The digital recorder shall have the ability to customize cameras with operator defined names. These names must be viewable and transferable after proprietarily exporting the user configuration. 13. The digital recorder shall have built-in motion detection for each camera. 14. The digital recorder shall have a user adjustable motion detection area consisting of a 12x12 grid, where each section can be selected / deselected. 15. The digital recorder shall have a user adjustable motion detection sensitivity, with options from 1 (lowest sensitivity) to 10 (highest sensitivity). 16. The digital recorder shall have the ability to hide cameras from general users, yet still record. 17. The digital recorder shall have the ability to manually adjust each cameras brightness, contrast and hue independently. 18. The digital recorder shall include a hardware monitoring (watchdog) system which will monitor the systems hardware devices. If the system should ever lockup the hardware monitoring system shall automatically reboot the system. Therefore allowing the system to begin recording immediately upon startup. 19. The system shall provide for at least 20 different usernames (and passwords) to which specific privileges such as search, setup, PTZ, shutdown, and backup may be assigned. The administrator shall be capable of hiding any different combination of cameras from each of the users. 20. The digital recorder shall have 16 (8ch model will have 8 and 4ch model will have 4) sensor inputs which are capable of triggering alarm events or initiating recording. The operator shall be able to set each sensor input as normally open or normally closed. 21. The digital recorder shall provide 4 alarm / relay outputs to activate external devices. 22. The digital recorder shall include an internal RS-485 connection from which the operator may interface PTZ cameras. The operator shall have the ability to control the PTZ functions while connected to the digital recorder remotely. The operator shall have the ability to control different brands of PTZ cameras which utilize different protocols with a single digital recorder. 23. The digital recorder shall have the following PTZ control protocols available: a. OpenEye 500 (OPTIX 1) b. OpenEye 510 (OPTIX 3) c. OpenEye – Pelco D d. American Dynamics e. Cynix Speed Dome f. DynaColor g. ERNITech h. FastraxII i. Ganz-PT j. Honeywell MAXPRO k. Honeywell VCL l. Honeywell (GC-655P) m. Honeywell (HSD-250) n. Honeywell (HSD-251) o. HISHARP

2 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30105 Rev AD p. HSDN 251/230 q. KALATEL r. LG (LVC-A70X) s. LILIN t. ORX-1000 u. Pelco-D v. Pelco-P w. PTC-400C x. RS-485 DIRECT y. SCC-641 z. SCC-645A aa. SDM-100 bb. SJ-3728R1 cc. SK-P dd. SK-S ee. SPD-1600 ff. SRX-1008 gg. TBT-DOME hh. Vison-360 ii. Visiontech jj. WSD7425D kk. WV-CS854 ll. YOKO-CCTV 24. The digital recorder shall offer on screen PTZ camera control by clicking and dragging the mouse over the live video display. 25. The Digital Recorder shall include DDNS (Dynamic Domain Name System) for free for the life of the product. DDNS shall allow the operator to use a URL address instead of a static IP address. 26. The digital recorder shall provide email notification to one or more recipients for video loss, motion, sensor, hard drive smart check, and system power on/restart events. 27. The digital recorder shall provide a LAN/WAN connection. Required software for connecting to the recorder shall be provided free of charge. The remote operator shall also be capable of backing up still JPG images, and/or video segments to his/her local hard disk in AVI or proprietary file format. 28. The digital recorder shall support NTSC- or PAL-formatted video. 29. The digital recorder shall include a standard DVDRW drive capable of Read/Write to which the operator may backup video in its proprietary format. 30. The digital recorder shall have the ability to span backed up recorded video over multiple DVDs. 31. The digital recorder shall allow the inclusion of backup viewer software on the backup media to allow viewing the proprietary video. 32. The digital recorder shall provide the necessary software for image authenticity verification of each image recorded. 33. The digital recorder shall be capable of notifying the local operator by sound in the event video from a camera is lost (video loss alarm). 34. The digital recorder shall be capable of triggering an external alarm device through a control output in the event video a camera is lost (video loss alarm).

3 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30105 Rev AD 35. The digital recorder shall be capable of triggering an external alarm device through a control output in the event power is lost (power loss alarm). 36. The digital recorder shall have an operating temperature rate of 41°F to 104°F (5° to 40°C). 37. The digital recorder shall operate at a relative humidity rate of maximum 80% non-condensing. 38. The digital recorder shall be RoHS compliant, have CE Certification and have all clearly labeled on the outside of the box. 39. The digital recorder shall provide exportable system and event log files which may also be viewed and searched by date in the software interface.

2.02 RECORDING CAPABILITIES 1. The digital recorder shall have the following recording modes available: Continuous, Motion, Sensor, Continuous and Motion, Continuous and Sensor, Motion and Sensor. 2. The digital recorder shall provide a schedule from which the operator may choose whether the system will record based upon motion detection or continuously 24 hours a day, seven days a week. 3. The digital recorder shall accept special day preprogramming so recording schedules may be adjusted around holidays and/or special day events. 4. The digital recorder shall have intensive recording. This will allow the digital recorder to begin recording or boost recording speed based on sensor or motion detection. 5. The digital recorder shall have the ability to emergency record all cameras by simply pressing the record button on the IR remote control or the main screen. 6. The Digital Recorder shall allow configuration per video input of the resolution, quality, sensitivity, and number of images per second each camera will record. 7. The digital recorder shall be capable of recording in either NTSC or PAL format. 8. The digital recorder shall have pre and post alarm recording. A pre-alarm recording feature shall be available to record up to 5 seconds of video prior to an event. Post-alarm recording feature shall be available to record up to 30 seconds of after the event. 9. The digital recorder shall have the ability to automatically adjust for Daylight Savings Time changes, with no loss of video when the hour jumps forward or back. 10. The digital recorder shall be capable of recording up to 30IPS on a single channel. The operator shall have the ability to assign each channel a specific recording rate varying from 1 to 30IPS. The Digital Recorder shall support the following recording resolution and frame rate configurations:

Resolution CCTV 240 IPS Model 120 IPS Model 352x240 1CIF 240 PPS 120 PPS 704x240 2CIF 120 PPS 120 PPS 704x480 4CIF 60 PPS 60 PPS

11. The operator shall be able to assign each channel a different recording resolution. 12. The recorder shall have a quick setup function that will allow the user to set a global resolution, record mode, IPS and image quality for the DVR.

4 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30105 Rev AD 2.03 SEARCH FEATURES 1. The digital recorder shall include the ability to search by using fast forward or rewind. Using the feature the operator shall be able to search using any number of cameras and have the ability to speed up or slow down the speed of playback. 2. The digital recorder shall include an event search that indexes all events. Using this feature the operator shall be able to search through previously recorded video based on motion detection, sensor activation, emergency recording or video loss. 3. The digital recorder shall have the ability to search recorded video on the main screen by clicking the play button in the on-screen display menu or by pressing the reply button on the IR remote control or front panel control. 4. The digital recorder shall provide simultaneous playback viewing while recording live images, and backing up recorded images in true multiplex operation. 5. The digital recorder shall have the ability to search video based on time and date. 6. The digital recorder shall have the ability to begin playback from the earliest recorded data or from the most recent data. 7. The digital recorder shall have the ability to playback video that has been saved to an external USB device or a CD/DVD.

2.04 REMOTE SOFTWARE 1. The digital recorder shall come with remote software and multi-site management software free of charge. 2. The Digital Recorder Manufacturer shall provide additional copies of remote and multi-site software via the web at no additional charge. 3. The Digital Recorder Manufacturer shall provide upgrades to Remote and Multi-Site Management software free of charge during the product warranty period. 4. The remote software shall provide the user with most of the functions that the user has locally, including administration privileges. The administrator shall also be able to add, delete, or update users when connected to the system remotely. 5. The digital recorder shall be remotely upgradeable via an internet or dialup connection. 6. The remote software shall use the same user accounts that the digital recorder uses locally. 7. The multi-site software shall be able to support multiple digital recorder connections simultaneously and control the digital recorders using a single PC workstation with appropriate network connectivity. 8. The multi-site remote software shall be capable of supporting up to 4 monitors. 9. The multi-site software shall be capable of displaying up to 256 cameras in live view. 10. The Remote and Multi-Site Software must be capable of exporting avi video and jpeg images - with a digital signature. 11. The multi-site remote software shall be able to create custom interactive maps and incorporate cameras and/or sensors to locations on the map, link multiple maps, use linked internet maps (Google, Etc). 12. The Multi-Site software shall be able to backup video data in proprietary format, AVI and/or JPEG. 13. The operator, using administrator privileges, shall be capable of administering the systems by remotely making changes to any setup options with the only exception of communications settings.

5 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30105 Rev AD 14. The digital recorder shall be capable of automatically transferring live images via TCP/IP to an emergency client workstation in the event a sensor is activated. The emergency agent software shall be capable of automatically opening without assistance from the operator.

2.05 REPORTSTAR INTEGRATION 1. The digital recorder shall come with the ability to connect to the ReportStar cloud based service. 2. The ReportStar Service shall provide email and SMS critical alert notifications for events that occur on the digital recorder. 3. The ReportStar service shall have the ability to report on SMART Hard Drive events. 4. The ReportStar service shall have the ability to report on Video Loss events. 5. The ReportStar service shall have the ability to report on Sensor inputs. 6. The ReportStar service shall have the ability to report when the digital recorder has not reported to the ReportStar service within 24 hours. 7. The ReportStar Service shall have the ability to send automated reports by email daily, weekly, or monthly. The reports will contain a compiled rollup of information collected during the reporting period including critical events, average recording duration and day/night images. 8. The ReportStar service shall have a report that shows daily day and night images for each camera connected to the digital recorder. 9. The ReportStar service shall have a report that shows the average recording duration on the digital recorder. 10. The ReportStar service shall have the ability to connect to the web interface of each digital recorder for viewing video. 11. The ReportStar service shall have the ability to allow unlimited number of user accounts with carrying permission levels. 12. The ReportStar service shall have the ability to add an unlimited number of supported OpenEye digital recorders and associate each to a Subscriber (end-user) account. 13. The ReportStar service shall have the ability to create unique custom portals for each Subscriber.

3. SUPPORT

3.01 SUPPORT 1. The 215 Camera shall come with an extensive support structure, including a 1-888 number for technical service, pre and post sales assistance, direct points of contact, and access to online sales and technical support. 2. Technical Support shall be available 24 hours per day, seven days per week to all integrators and dealers free of charge.

3.02 WARRANTY 1. The digital recorder shall come with a minimum 3 year manufacturers warranty with the 1st year including advance replacement service. Each unit shall have the purchase option to upgrade the warranty period up to 5 years and 2 years of advance replacement service.

4. SUPPORTED MODELS

6 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30105 Rev AD 4.01 SUPPORTED MODELS 1. The digital recorder shall be one of the following models or an approved equivalent:

OE3-E24016500 E-Series DVR, 240IPS, 16 Channel, 500GB Storage OE3-E240161T E-Series DVR, 240IPS, 16 Channel, 1TB Storage OE3-E240162T E-Series DVR, 240IPS, 16 Channel, 2TB Storage OE3-E240164T E-Series DVR, 240IPS, 16 Channel, 4TB Storage OE3-E24008500 E-Series DVR, 240IPS, 8 Channel, 500GB Storage OE3-E240081T E-Series DVR, 240IPS, 8 Channel, 1TB Storage OE3-E240082T E-Series DVR, 240IPS, 8 Channel, 2TB Storage OE3-E240084T E-Series DVR, 240IPS, 8 Channel, 4TB Storage OE3-E12004500 E-Series DVR, 120IPS, 4 Channel, 500GB Storage OE3-E120041T E-Series DVR, 120IPS, 4 Channel, 1TB Storage

4.02 ACCESSORIES 1. The following accessories are compatible with the OpenEye OE3 E-Series Recorders.

AC-OE3ERACK 2U 19” Rack Mount Kit AC-OE3EREMOTE E-Series Remote Control

7 | 23221 E. Knox Ave. Liberty Lake, WA 99019 | Phone: 509.777.6702 30105 Rev AD