Metal Detector Check List

PJ Tech

Northlands Business Park Tel.: +27 (011) 704-7088 / 9 New Market Rd., North Riding Fax: +27 (011) 704-7019 Johannesburg, South Africa e-mail: [email protected] www: www.pjtech.co.za

APPLICATION CHECK LIST: METAL DETECTOR Quote Reference: Tag: Customer: End-User: Fax No/e- Date: mail:

In order to evaluate the application and to ensure that any system subsequently purchased will be compatible with the application, certain data is required. Please enter the data required on the sketch and questionnaire below.

PROBLEM METALS Smallest size metal to be detected (mm) X X mm Metal Type (s)

PROCESS MATERIAL PROCESSED MATERIAL: Is material Damp Wet Dry Contain iron Yes No (Mark Choice) What type % Iron Conductive Yes No

GENERAL FACILITY INFORMATION Equipment to be protected Crusher Setting Power supply available 220V AC 110V AC 50 Hz 60 Hz (Mark Choice) Is power regulated? Yes No (Mark Choice)

Belt Width (A) mm Belt Speed m/sec Trough Idler Angle (B) deg Belt Rise (Z) mm Idler Spacing (C) mm Idler Diameter (D) mm Outer Frame Width (E) mm Inside Frame Width (F) mm Average Nominal Burden Depth (G) mm Lump Size mm Total Height with Lumps mm Distance between bottom of carry and return belt (H) mm Distance between top of frame and bottom of carry belt (I) mm Belt Sag under full load (J) mm Steel Core Belt Yes No (Mark Choice) Are metal splices or clips used? Yes No (Mark Choice)

of 2 PJ Tech

Northlands Business Park Tel.: +27 (011) 704-7088 / 9 New Market Rd., North Riding Fax: +27 (011) 704-7019 Johannesburg, South Africa e-mail: [email protected] www: www.pjtech.co.za

GENERAL FACILITY INFORMATION (continued) Do flanges point like “X” or “Y”? X Y Desired control unit location (left/right) when viewed in belt movement direction Right Left Portable Plant? Yes No (Mark Choice) Moved Frequently? Yes No (Mark Choice) Search Coils location? Outdoors Indoors (Mark Choice) Explosive area? Yes No (Mark Choice) Control Enclosure location? Outdoors Indoors (Mark Choice) Cable length required between search coils and control enclosure meters

SPECIAL REQUIREMENTS (e.g. marking device, remote reset)

OPTIONAL - SKETCH OF CONVEYOR (Side View) or attach drawing (ACAD .dwg or .pdf )

CONFIRMATION OF TECHNICAL DETAILS AS SET OUT ABOVE (requirement of ISO 9000/9001) Print Name: Designation: Signature: Date:

FOR OFFICE USE Model purchased: Spray marking purchased: Clip detector purchased: Additional requirements: