Technical Product Specifications - Template s1

OMNIstar

Technical Product Specifications

of 9 Table of contents

1. General Specifications 3

2. Photometry 4

3. Mechanics 5

4. Electrical Characteristics 6

5. Power Supply 7

6. Environment 7

of 9 1. General Specifications

The OMNIstar is a multi-purpose high power modular LED luminaire solution designed to provide an unrivalled combination of performance and flexibility for lighting areas where high lumen packages are needed while offering maximum savings in energy and maintenance costs with a short payback time. This modular luminaire can be installed on high masts with a bracket of one, two or three luminaires to provide the lighting distribution and lumen package needed to meet the specifications of the area to be lit. Add flexibility with on-site photometric adjustment, the OMNIstar guarantees the perfect lighting to ensure safety and comfort. It offers a real alternative to luminaires equipped with high-power traditional light sources, with the added advantages of an LED solution: low energy consumption, improved visibility with white light, limited maintenance and longer life. The OMNIstar can be fitted with the Owlet range of control solutions to enable you to further maximize energy savings by adapting the light levels Product Description according to the real needs. A wide range of photometry is available. The LensoFlex® photometric engine allows flexibility of multiple light distributions to ensure that the specific requirements of each application are met. Other optics used are collimators for typical symmetrical floodlight distributions and reflectors for asymmetrical distributions. ThermiX®: The OMNIstar offers an efficient thermal management of both the LEDs and the power supply thanks to the separation between the optical unit and the gear box. The cooling fins on the optical unit optimize the heat dissipation. This design enables the OMNIstar to perfectly manage high ambient temperatures (Ta up to 55°C) and ensures reliability in the long term. The luminaire housing is manufactured of high- pressure die-cast aluminum. To withstand even the most corrosive environments, the luminaire housing is especially e-coated. It is designed for LED light sources between 108W and 463W Main applications  Industrial Areas - Highbay Industrial Warehouses  Indoor Sports: Swimming pools, Gymnasium, Action Cricket, Soccer and Netball venues  Outdoor Sport : Tennis Courts, Hockey Fields

of 9  Transport hubs (airport aprons, harbours, bus stations and train stations)  Streetlighting - large highway intersections, toll plazas  Area Lighting Recommended mounting height 8 - 40m

2. Photometry

Light source LED

LED 2mm2 or 4mm2 LED

Colour Temperature Neutral White (4000K)

Colour rendering (Ra) ≥70

LEDs / Wattage Lumen Package 32 LED @ 1000mA 40781lm 108W to to 63465lm 144LEDs @1000ma 453W

Optics Collimators: 5125*, 5126*, 5127* and 5128* Reflectors Asymmetrical: 2258, 2266, 2261, 2260 and 2259 LensoFlex®2: 5118*, 5119*, 5120*, 5121* and 5188

*Not available for high lumen output version

Photometry:

of 9 Page 6 of 9 Lifetime OVERVIEW residual flux Tq 250C OMNIstar- OMNIstar-midi maxi Number of Neutral white 32 40 48 64 144 LEDs LEDs (4000K) LEDs LEDs LEDs LEDs Nominal Flux - - - - 42549 100.000h (lm) (1) Current 90% Power 700mA (3) Consumption - - - - 315 (W) Nominal Flux 1792 54501/6346 11948 14935 23896 (lm) (1) (5) Current 2 5 60.000h 1000mA Power 80% (4) Consumption 108 135 162 216 463/453 (5) (W)

(1) The nominal flux is an indicative LED flux @ Tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. Nominal flux depends on the type of LED in use and likely to change in accordance with the continuous and rapid developments in LED technology. To follow the progress of the luminous efficiency of the LEDs used, please visit our website. (2) In accordance with IES LM-80 – TM-21 (3) Ta = 35˚ C max outdoor and indoor (4) Ta= 30˚ C max outdoor, 25 ˚ C indoor (5) Refer to High Lumen Output section in the Ordering Data table.

3. Mechanics

Electronic control Gear Constant Current Driver

Materials and finishing Housing – High quality high-pressure die-cast aluminum (EN 1706 AC-47100) Protector – High Impact Clear Glass

Finish Standard Pearl Light Grey (RAL 9022), Textured finish Optional: Any other RAL colour available on request

Installation Standard: Stirrup version Optional: Suspended version

Fixing 2 x ø 8mm bolts (standard version) 4 x ø 6mm eyebolts (suspended version)

Dimensions in mm (L x W x H) Maxi: 530 * 530 * 80 (Optical Block) Midi: 427 * 427 * 156

of 9 Weight (with gear) Maxi: Up to 25.2kg Midi: Up to 10.8kg

Access Yes

Aerodynamic resistance Maxi: 0.168m2 Midi: 0.12m2

4. Electrical Characteristics

Line Voltage 230VAC

Mains voltage Tolerance (AC) 198-264V

Line frequency 50Hz

Electrical Safety Class (IEC) Class I

Surge protection Yes - 10kV/10kA

Optional - 20kV/20kA

Lighting control Optional - OWLET Remote Management (Maxi only)

of 9 5. Power Supply

Power Factor ≥0.95

Removable Yes

Thermal Safety Yes

6. Environment

Storage temperature - 400C to +600C

0 0 Operating temperature (Ta) - 40 C to + 35 C

Enclosure Tightness IP 66

Enclosure Mechanical Withstand Impact Maxi: IK08 Midi: IK 07

* Certified Test Standard SANS IEC 60598 -2-3 (available on request)

Updated By : Approved by Document Revision / Date Nadja Smith Daniel Kasper 29/09/2017

(1) For specific Tq, Ta and life time data, contact BEKA Schréder