Instructions to Prepare the Paper for the KSME-JSME Joint International Conference on Manufacturing, Machine Design and Tribology

M. Yang*, M. Horie, and K. Inoue

* Department of Mechanical Engineering University of Seoul, Seoul, Korea e-mail: [email protected]

Abstract: Abstract starts from here. …… 10pts ……… …Abstract up to 200 words. …………… .. .. …… ……………… …… …… ……. …. ………….. ………… ……… Keywords: 3 – 4 words describing the abstract contents

Put Your First Level Subheading This Way imported into the document (permanent) and This document provides information and instructions contained within the text. for preparing an ICMDT paper using a computer and a printer. If you follow these instructions, the Table 1. Table captions should be 9-points type and end typeface, style, and basic layout of your paper should with a period. There should be two spaces between table look something like this document. number and table caption text. Table caption should go above table and text should be justified (aligned on left and All papers submitted must be formatted according to right). these directions and must be camera ready for printing (no photocopies). Papers which do not meet these formatting requirements cannot be included in Table Image Here the Proceeding of ICMDT. Papers should be a type of one, two or four-page, including tables and figures. One-page paper is allowed to contain abstract only. Two or four-page paper is allowed to contain main-script as ‘1. Introduction…,5. Conclusions as well as abstract. Caption Image Here Text must be single-spaced, justified (aligned on left and right margins) and in two-column format in 10- point font size unless otherwise indicated in these directions. All text, figures, or photographs must be in black and white. Electronic manuscripts must be Fig. 1. Figure captions should be 9-points type and end with a period. There should be two spaces between table printable on 216 by 279 mm paper. number and table caption text. Figure caption should go below figure and text should be justified (aligned on left Put Your First Level Subheading This Way and right). Put Your Second Level Subheading This Way Printing Do not use page numbers or footers on the front of Your paper will be printed directly from the pages the manuscript pages. Page numbers may be written you submit. No galley proofs will be prepared, so in pencil on the back of each page to ensure proper make sure your manuscript is carefully proofread order of printing. before submitting it. It is not possible to make Papers must not be folded, taped, or stapled and corrections after submission. Your document must cannot exceed four typed pages including tables and not be stapled or folded; folds and removed staples figures. cause shadows on the printed page.

Figures, Tables, and Photos All figures, tables and photos must be in black and Clearance white and must be clear and sharp; photocopies are Authors are responsible for obtaining company or not acceptable. Do not use tape, adhesives or staples other necessary clearance before submitting their anywhere in the document. All graphics must be manuscript. Copyright The conference proceeding is protected by Korea copyright laws; however, KSME makes no claim to the copyright of individual papers; authors maintain the copyright to their individual paper.

Paper submission Manuscript submissions are due April 30, 2005, to the ICMDT Technical Committee Chair.

References 1. Lindeke, R. R., F. C. Schoenig, Jr., A. K. Khan, and J. Haddad, (1991), “Machining of a Titanium with Ultra-High Pressure Through the Insert Lubrication/Cooling,” Transactions of the North American Manufacturing Research Institution of SME, Vol. 19, pp. 154-161. 2. Trigger, K. J., and B. T. Chao, (1951), “An Analytical Evaluation of Metal Cutting Temperatures,” ASME Transactions, Journal of Engineering for Industry, Vol. 73, pp. 57-68. 3. Ulsoy, A. G. and W. R. DeVries, (1989), Microcomputer Applications in Manufacturing, Jon Wiley and Sons, Inc., New York.