• Abstract and Figures
• Public Full-text

September 2006 doc.: IEEE 802.22-06/0191r1

IEEE P802.22 Wireless RANs

Recommended Practice Discussion Outline

Date: 2006-09-198

Author(s): Name Company Address Phone email Winston 10201 W. Pico Blvd. FOX 310-369-4367 Winston.caldwell@fo Caldwell Los Angeles, CA 90064 x.com Gerald Communications 3701 Carling Ave. 613-998-2500 Gerald.chouinard@cr Chouinard Research Centre Ottawa, Canada K2H-8S2 c.ca

Abstract Discussion topics are presented as an outline in consideration of the development of the 802.22 Recommended Practice – 802.22.2.

Notice: This document has been prepared to assist IEEE 802.22. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.

Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.22.

Patent Policy and Procedures: The contributor is familiar with the IEEE 802 Patent Policy and Procedures , including the statement "IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents essential for compliance with both mandatory and optional portions of the standard." Early disclosure to the Working Group of patent information that might be relevant to the standard is essential to reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair as early as possible, in written or electronic form, if patented technology (or technology under patent application) might be incorporated into a draft standard being developed within the IEEE 802.22 Working Group. If you have questions, contact the IEEE Patent Committee Administrator at .

Submission page 1 Winston Caldwell, FOX September 2006 doc.: IEEE 802.22-06/0191r1

Recommended Practice Discussion Outline

I. Introduction

II. Definition (of this Recommended Practice) A. Purposes i. Guidance ii. Operational clarification iii. Information B. Users i. Regulators ii. IEEE 802.22 iii. System operators iv. Other wireless technology groups (coexistence)

III. Development Procedure A. Policy & Procedures: to use 802.22 P&P (Agreed Y=6, N=0) B. Text development i. Base documents a. FRD (07-r47) and its annexes, b. 802.18 comments c. Spread sheet calculations ii. Possible FRD updates: document it and refer it to the main 802.22 main group C. Comment resolution D. Ballotting

IV. Deployment A. System i. Planning of service a. Advanced propagation prediction model (TIREM) b. Incumbent station database 1. Channel information 2. Polygons 3. Standardized format c. Separation distances d. Path loss exponent B. BS i. Availability a. Professional supplier C. CPE i. Availability

Submission page 2 Winston Caldwell, FOX September 2006 doc.: IEEE 802.22-06/0191r1

a. Consumer outlets

V. Installation A. System i. Application software B. BS i. Antenna a. TX antenna 1. Professional install 2. 75 m high 3. Vertical directivity 4. Sectorization b. RX antenna 1. Professional install 2. 75 m high 3. Vertical directivity 4. Sectorization c. Sense antenna 1. Professional install 2. 75 m high 3. Vertical directivity 4. Sectorization ii. TX/RX equipment a. OOB C. CPE i. Antenna a. TX antenna 1. 10 m high 2. Orientation 3. Polarization discrimination 4. Patterns 5. Gain 6. Front-to-back b. RX antenna 1. 10 m high 2. Orientation 3. Polarization discrimination 4. Patterns 5. Gain 6. Front-to-back c. Sense antenna 1. 10 m high

Submission page 3 Winston Caldwell, FOX September 2006 doc.: IEEE 802.22-06/0191r1

2. Orientation 3. Polarization discrimination 4. Patterns 5. Gain 6. Front-to-back ii. RF front end a. Noise figure b. Filtering iii. TX/RX equipment a. OOB iv. Cable loss v. Tamper-resistant

VI. Operation ? A. System i. Monitoring required on a continuous basis a. Mapping position of CPEs 1. Distributed sensing reliability b. Mapping position of polygons as a function of frequency in real time c. Mapping the TPC levels for verification of proper CPE installation ii. Assistance for operator a. CPE association/disassociation based on position information and sensing (to avoid odd-ball operation with far CPEs) iii. Active remote verification of CPE installations to see if a change has happened. iv. Mapping operation of Part 74 devices. v. Mapping of area for CPEs to have their parameters changed within a radius around microphone operation. vi. B. BS C. CPE

VII. Statements of Necessity

VIII. Means to Strengthen the Authoritativeness of the Recommended Practice

IX. Compliance

X. Enforcement

XI. Conclusion

Submission page 4 Winston Caldwell, FOX

Load more

  4

Copy Link