Complex Drilling Works Trust of State Oil Company of Azerbaijan Republic (SOCAR)

"Complex drilling works" trust of State Oil Company of Azerbaijan Republic (SOCAR) announces prolongation of application and bid submission deadline, as well as, opening date of an open procurement competition (№26018-16) in order to provide the requirement of Drill Bits

Documents to be submitted for participation in the competition: . Application letter for participation in the competition (the letter is attached); .Bank document on payment of the participation fee; .Bid.

Application for participation in the competition (signed and sealed) and the bank document on payment for participation fee should be submitted in Azerbaijani, Russian or English languages no later than 20.07.2016, 5:30 p.m. by Baku time, to the address of the Purchasing organization specified in the notice. The copies of the required documents (except the bid) may be sent to the e-mail address of the contact person specified in the notice. In this case, the originals of the documents shall be submitted to the Purchasing Organization until the last day of submission of the bids. The deadline for submission of the bids: . An original and two copies of the bid shall submitted to the Purchasing Organization before 28.07.2016, 9:30 a.m.by Baku time. .Late bids shall be rejected without opening.

The acquisition of the aninvitation to bid and participation fee: . Those wishing to acquire an invitation to bid in Azerbaijani, English or Russian languages can obtain it from the contact person in electronic or print form after paying 350 Azerbaijani manat ( VAT included) or an equivalent amount in any other freely convertible currency to the below-mentioned account, till the date specified in the paragraph I of the notice, on any business day of the week from 09:30 a.m. to 05:30 p.m.

.Account number: International Bank of Azerbaijan OJSC, AZ38IBAZ38010019449306332120, TIN: 9900003871, Customer Services Department, Code: 805250, Correspondent account: AZ03NABZ01350100000000002944, TIN: 9900001881, SWIFT BIK: İBAZAZ2Х

.The participation fee is not refundable The execution date of the Contract: It is required to fulfill the conditions of the purchase contract within 60 (sixty) calendar day.

The address of the Purchasing organization: AZ1029 (index), N.Narimanov district, Block 1222, building 12, “Caspian Line Business Center”, the 3rd floor, Baku, Azerbaijan Republic Contact person: Huseynov Anar Procurement and marketing department, Deputy Head

Phone: + 99 412 521-31-59 Fax: + 99 412 521-31-59 E-mail: [email protected]

The notice , information about the subject of procurement and application form to obtain tan invitation to bid are placed at the internet site: www.socar.az ( http://www.socar.az/socar/az/company/procurement-supply-chain-management/procurement-notices )

Time, place and the opening date of bids: Bids wil be opened on 28.07.2016at 10:00 a.m. by Baku timeat the address of the Purchasing Organization specified in paragraph V of the notice.

An information about contracts awards: An information about the final results of the competition can be obtained from the following web link: http://www.socar.az/socar/az/company/procurement-supply-chain-management/contract-awards

The procurement group of the “Complex drilling works” trust, SOCAR (In the firm blank of the applicant) Application form for participation in open competition and for acquisition of ITB- Invitation to Bid (Set of Basic Conditions)

______city “__”______20__

______No.

Attn.: Faig Huseynov Head of procurement group of “Complex drilling works” trust, SOCAR

Hereby we,[full name of the applicant consignor (Contractor) is specified]confirm the intent of participation in an open competition No. 26018-16 announced by “Complex drilling works” trust, SOCAR for purchasing Drill Bits.

At the same time, we confirm the absence of any cancellation or bankruptcy procedures, activity interruption in relation to [full name of the applicant consignor (Contractor) is specified] or any situation making it’sparticipationimpossible. We kindly ask You to send the soft copy of an invitation to bid to the following e-mail address:______.

The contact information for propmtly responding the queries relating the documents submitted by us and other issues: . Contact person: ______. Position of the contact person: ______. Phone number: ______. Fax: ______. E-mail address: ______

Appendix: 1. Original of the bank document on payment of the participation fee – __ pages. ______(name, surname, patronymic of the responsible person) (signature of responsible person) ______(position of responsible person)

Seal THE LIST OF PURCHASING GOODS

Seq uenc Unit of Name of the goods Quantity e measurement Standards of the Goods No.

Drill Bits

Matrix type, for directional drilling, 6 blades, 8 nozzles, drill bit made under PDC 311,1API IADC M222 specific conditions with PDC cutters 1 (Matrix type, 6 blades, ea 2 (total cutters -56), nozzle standard type 8 nozzles, H cutter =16 mm) 60 N, drill bit connection thread Nipple - 6 5/8Reg, with rotor and BHM, WOB is – 3-8 ton, flow rate 31-75 l/s Matrix type, for directional drilling, 6 blades, 6 nozzles, drill bit made under PDC 215.9 API IADC M 222 specific conditions with PDC cutters (total cutters -31), nozzle standard type 2 (Matrix type, 6 blades, 6 ea 3 60 N, drill bit connection thread Nipple - nozzles, H cutter =16 mm) 4 ½ Reg, with rotary and BHM, WOB is – 2-12 ton, flow rate 18-50 l/s

Matrix type, for directional drilling, 6 blades, 8 nozzles, drill bit made under PDC 215.9 API IADC M 333 specific conditions with PDC cutters 3 (Matrix type, 6 blades, 8 ea 3 (total cutters -40), nozzle standard type nozzles, H cutter =13 mm) 60 N, drill bit connection thread Nipple - 4 ½ Reg, can be used with rotary and BHM Matrix type, for directional drilling,5 PDC 295.3 API IADC M blades, 7 nozzles, drill bit made under 223 specific conditions with PDC cutters 4 ea 4 (total cutters -37), nozzle standard type (Matrix type, 5 blades, 7 60 N, drill bit connection thread Nipple - nozzles, H cutter =16 mm) 4 ½ Reg, with rotary and BHM, WOB is – 3-14 ton, flow rate 31-78 l/s with rotary and BHM, WOB is 7-27 ton, Tricone drill bit 444,5 API 5 ea 3 50-350 RPM, the bearings are equipped IADC 117 with exact gaskets, connection thread 7 5/8Reg. with rotary and BHM, WOB is 4-20 ton, Tricone drill bit 444,5 API 6 ea 5 50-280 RPM, the bearings are equipped IADC 215 with exact gaskets, connection thread 7 5/8Reg. with rotary and BHM, WOB is 8-20 ton, Tricone drill bit 393.7 API 7 ea 5 80-200 RPM, the bearings are equipped IADC 217 with exact gaskets, connection thread 7 5/8Reg. with rotary and BHM, WOB is 4-20 ton, Tricone drill bit 295.3 API 50-280 RPM, the bearings are equipped 8 ea 6 with exact gaskets, connection thread 6 IADC 214 5/8Reg., suitable for medium hard formations, at least 3 nozzles with rotary and BHM, WOB is 4-20 ton, Tricone drill bit 215.9 API 40-140 RPM, the bearings are equipped 9 ea 10 with exact gaskets, connection thread 6 IADC 214 5/8Reg., suitable for medium hard formations, at least 3 nozzles