DRT-9070 Distributed Remote Terminal

Mini-RTU and IED Gateway

Mini-RTU and IED Gateway The DRT 9070 is an economical mini-RTU/Gateway for The DRT-9070 Remote Terminal Unit is an economical distributed distributed monitoring and automation platform used for control, supervision, data acquisition control functions. and data reduction. The DRT-9070 can act as a mini-RTU, a Wall or pole-mounting distributed input-output point on your distribution network and as an Intelligent Electronic Device ( IED) data concentrator. Substation or distribution feeder IED Gateway The DRT-9070 maintains an internal database by scanning local hardwired inputs as well as the status and analog points within Supports a large library of master connected IEDs. These values may be polled by one or more station and IED protocols SCADA master stations over a variety of protocols and media. Then The DRT-9070 also time tags events which are available to Optional TCP/IP, web server the SCADA system’s master station, as sequence-of-events interface (SOE) data. Local calculation package for date manipulation, reduction and The DRT-9070 can be configured for communications through its automation. RS-232 or RS-485 serial ports. Optionally it can be equipped with a network interface for communication over one or two TCP/IP Advanced security features for based networks. Popular communications protocols are available NERC-CIP compliance for both the server connection ( to the master station) as well as locally to the IEDs. Sequence-Of-Events (SOE) capture

The DRT-9070 ca operate on 120 VAC service or directly from the Meets all applicable IEEE and IEC station battery. This arrangement can also provide the battery surge withstand requirements for trouble free operation backup for local communications equipment ( radios, routers, etc.)

Master and IED communications ports and other parameters are easily entered with QEI’s ConfigWiz® software from any standard WIndows® laptop or PC. DRT-9070 Distributed Remote Terminal

SPECIFICATIONS Control Outputs 3 control points each with 2 momentary Form C contacts, 10 amps @ 30 Vdc/277 VAC

24 contact inputs, optically isolated. Meet IEEE C37.1.90 SWC. 12, 24 48 or 125 Status Inputs Vdc keying voltage.

Ports One RS 232C and one RS-485 client or server ports (user configurable). One Diagnostic and programming RS-232 Port. Optional network interface card with 10baseT (RJ45) or 10baseAUI (DB15), 100baseTX (RJ45) or 100baseFX (multi-mode or single mode), RS232 PPP communication port and RS232 diagnostic port

Protocols Server: DNP or Single Client: DNP or Modbus Web Server Other Legacy Server (master Station) and Client (IED protocols) available from the QEI Automation Systems library

Power 1.0 Amp@120 VAC, 60 Hz, single phase (optional battery backup) 1.0 Amp@125 Vdc 1.5 Amp@48 Vdc 3.0 Amp@24 Vdc

Physical with optional thermostatic heater. 24”H 20” W 10” D NEMA 4 metal enclosure with front access

LED Indicators 12 LED Indicators to monitor power, communications and central processor

Enclosure NEMA 4, 24” X 20” X 10” front access cabinet, weight 80 lbs for wall or pole-top mounting.

QEI LLC 45 Fadem Road This literature is for illustration purposes Springfield, NJ 07081 USA only. And is not part of any contract. As we have a policy of continuous product T: +973-379-7400 F: +973-379-2138 improvement, any features may be modified E: [email protected] without notice. All trademarks and names mentioned in this document remain the W: www.qeiinc.com exclusive property of their holder.

V2.4 1/19