VGA Video Monitor Adapter Gender Changer 15HD Male Female DVI

Total Page：16

File Type：pdf, Size：1020Kb

VGA Video Monitor Adapter Gender Changer 15HD Male Female DVI

VGA Adapters www.vpi.us/c/vga-adapters-257 15HD VGA Gender Changer, Female to Female 15HD VGA Gender Changer, Male to Male 15HD-FF 15HD-MM Change a male 15-pin HD VGA connector into a female connector. Change a female 15-pin HD VGA connector into a male connector. Enables mismatched D-sub 15HD connectors to mate. Enables mismatched D-sub 15HD connectors to mate. Panel mountable to allow cables through a bulkhead. Panel mountable to allow cables through a bulkhead. Fully shielded. Fully shielded. 15HD VGA Port Saver, Male to Female DVI-I Male to VGA Female Adapter 15HD-MF DVIM-15HDF Protect 15HD VGA port connectors that undergo frequent plugging and Connect a VGA monitor to a video card with DVI-I video output. unplugging from damage. Converts a female DVI-I video connector to a female VGA connector. Use as an in-line coupler to connect two 15HD VGA cables together to Male DVI-I to female 15HD connectors. form a single longer cable. Panel mountable to allow cables through a bulkhead. Fully shielded. Up Angled DVI-A Male to VGA Female Adapter DisplayPort Male to VGA Female Adapter DVIAM-15HDF-U DPM-15HDF Connect a VGA monitor to a video card with DVI output. Female VGA to male DisplayPort connectors. Up angled. Connect a VGA video display to a DisplayPort video source. DVI-A male to 15-pin HD female connectors. Supports resolutions up to 1920x1200 and 1080p. 1.800.626.7801 330.562.2622 330.562.1999 [email protected] 1 Toll Free: US & Canada International calls Worldwide fax www.vpi.us © 2019 VPI. All rights reserved. VGA Adapters www.vpi.us/c/vga-adapters-257 SUN 13W3 Video Male to VGA Female Adapter 13W3M-15HDF Connects a VGA monitor to a video card with SUN 13W3 video output. Converts a female SUN 13W3 video connector to a female VGA connector. Male SUN 13W3 to female 15HD connectors. DVI-I Male to VGA Female Adapter 1.800.626.7801 330.562.2622 330.562.1999 [email protected] Toll Free: US & Canada International calls Worldwide fax www.vpi.us 2 © 2019 VPI. All rights reserved..

Copy Link

Recommended publications

Display Technology Cathode Ray Tube
Display Technology Images stolen from various locations on the web... Cathode Ray Tube 1 Cathode Ray Tube Raster Scanning 2 Electron Gun Beam Steering Coils 3 Color Shadow Mask and Aperture Grille 4 Liquid Crystal Displays Liquid Crystal Displays 5 DLP Projector LCoS Liquid Crystal on Silicon Put a liquid crystal between a reflective layer on a silicon chip 6 Grating Light Valve (GLS) lots (8000 currently) of micro ribbons that can bend slightly Make them reflective The bends make a diffraction grating that controls how much light where Scan it with a laser for high light output 4000 pixel wide frame ever 60Hz Grating Light Valve (GLS) 7 Digistar 3 Dome Projector VGA Stands for Video Graphics Array A standard defined by IBM back in 1987 640 x 480 pixels Now superseded by much higher resolution standards... Also means a specific analog connector 15-pin D-subminiature VGA connector 8 The image cannot be displayed. Your computer may not have enough memory to open the image, or the image may have been corrupted. Restart your computer, and then open the ﬁle again. If the red x still appears, you may have to delete the imageVGA and then insert it again. Connector 1: Red out 6: Red return (ground) 11: Monitor ID 0 in 2: Green out 7 : Green return (ground) 12: Monitor ID 1 in or data from display 3: Blue out 8: Blue return (ground) 13: Horizontal Sync 4: Unused 9: Unused 14: Vertical Sync 5: Ground 10: Sync return (ground) 15: Monitor ID 3 in or data clock Raster Scanning 9 Raster Scanning “back“back porch” porch” “back porch” “front porch” VGA Timing Horizonal Dots 640 Vertical Scan Lines 480 60Hz vertical frequency Horiz.
[Show full text]
6 Ft Displayport to VGA Cable - M/M
6 ft DisplayPort to VGA Cable - M/M Product ID: DP2VGAMM6 The DP2VGAMM6 6ft DisplayPort to VGA (M-M) Cable lets you connect a VGA capable display to a DisplayPort video card/source. The cable provides a connection distance of 6 feet and features a male VGA connector and a male DisplayPort connector. The DisplayPort to VGA adapter cable supports high bandwidth video transmissions, easily delivering monitor resolutions up to 1920x1200 or HDTV resolutions up to 1080p - allowing you to take full advantage of your VGA display, while using a cutting edge DisplayPort video source. Backed by a StarTech.com 2-year warranty and free lifetime technical support. www.startech.com 1 800 265 1844 Certifications, Reports Applications and Compatibility • Keep your existing VGA display to use with newer DisplayPort monitors • The DisplayPort to VGA cable allows for an easy and hassle free connection to any VGA monitor or projector Features • All-in-one cable design • Supports PC resolutions up to 1920x1200 (HDTV - 1080p) • No software or drivers required www.startech.com 1 800 265 1844 Warranty 2 Years Hardware Active or Passive Adapter Active Adapter Style Cable Adapters Audio No Cable Jacket Type PVC - Polyvinyl Chloride Connector Plating Gold Performance Maximum Cable Length 6 ft [1.8 m] Maximum Digital Resolutions 1920x1200 / 1080p Connector(s) Connector A 1 - DisplayPort (20 pin) Male Connector B 1 - VGA (15 pin, High Density D-Sub) Male Environmental Humidity 20~80% RH Operating Temperature 5°C to 35°C (41°F to 95°F) Storage Temperature 0°C to 70°C (32°F to 158°F) Physical Cable Length 6 ft [1.8 m] Characteristics Color Black Product Length 6 ft [1.8 m] Product Weight 3.7 oz [104 g] Packaging Shipping (Package) Weight 4 oz [113 g] Information What's in the Box Included in Package 1 - 6 ft DisplayPort to VGA Cable - M/M Product appearance and specifications are subject to change without notice.
[Show full text]
VSC 50; Temperature/Humidity
Specifications Specifications, cont’d picture detail. It may be appropriate to change the switch General position after changing the position of the Over/Under switch. Power ............................................. 100VAC to 240VAC, 50/60 Hz, 15 watts, internal, 12 Signal Lock LED — When lit, the Signal Lock LED indicates that auto-switchable the input signal is within the range (800 x 600) of the VSC 50; Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to User’s Guide when blinking, it indicates that the signal is out of range; when 90%, non-condensing off, it indicates that no signal is present. Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing Specifications Rack mount ................................... No Enclosure type .............................. Metal Video input Enclosure dimensions ................. 2.25" H x 9.00" W x 6.25" D Number/signal type ................... 1 VGA, 1 Mac analog RGBHV, RGBS, RGsB 5.72 cm H x 22.86 cm W x 15.88 cm D Connectors .................................... VGA ........... 15-pin HD female (Add 0.5” for front panel knobs and 0.75” for rear panel connectors.) Mac............. 15-pin D female Shipping weight .......................... 6 lbs (2.7 kg) Nominal level(s) ........................... Analog ....... 0.7V p-p Vibration ....................................... NSTA 1A in carton (National Safe Transit Minimum/maximum level(s) .... Analog ....... 0V to 2V p-p with no offset Association) Impedance .................................... High Z or 75 ohms (DIP switch-selectable) Approvals ..................................... UL, CUL, CE, FCC Class A Horizontal frequency .................. Autoscan 24 kHz to 48 kHz MTBF ............................................. 30,000 hours Vertical frequency ....................... Autoscan 50 Hz to 120 Hz Warranty ......................................
[Show full text]
Extron XTP T VGA Setup Guide
IMPORTANT: Refer to www.extron.com for the complete user guide, installation instructions, and specifications before connecting the XTP T VGA • Setup Guide product to the power source. This guide provides instructions for an POWER INPUTS OVER XTP SIG LINK experienced installer to install and connect 12V AUDIO 1.0 A MAX RS-232 IR the Extron XTP T VGA transmitter. For RESET XTP T VGA complete instructions, see the XTP T VGA UNIVERSAL LOOP-THRU Tx Rx G Tx Rx XTP OUT LAN User Guide at www.extron.com. AB CDIMPORTANT: EFGH Refer to www.extron.com for the complete Power and Input Connections Throughputuser guide, installationConnections instructions, and and Reset Button specifications before connecting the product to the power source. A DC power connector and LED indicator E RS-232/IR Over XTP connector B Universal analog 15-pin HD connector F XTP output connector C Analog 15-pin HD loop-through connector G LAN connector D Analog audio input connector H Reset button Figure 1. Rear Panel Features Installation 15-pin HD Connector Pinout for RGB Video Pin Function Pin Function Pin Function Pin Function Pin Function Pin Function Step 1 — Mounting 10 516 11 RedRed video video 6 Red6 retuRedrn return11 Monitor11 MonitorID bit ID bit 2 Green video 7 Green return 12 Monitor ID bit Turn off or disconnect all equipment power sources 2 Green video 7 Green return 12 Monitor ID bit 3 Blue video 8 Blue return 13 H. sync and mount the switcher as required (see the 3 Blue video 8 Blue return 13 H.
[Show full text]
Dell C7017T User's Guide
User‘s Guide Dell C7017T Regulatory model: C7017Tf NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2016 Dell Inc. All rights reserved. Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell™ and the DELL logo are trademarks of Dell Inc.; Microsoft®, Windows®, and the Windows start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. 2016 –07 Rev. A01 2 Contents About Your Monitor ..................................... 5 Package Contents . .5 Product Features . 7 Remote Control . 8 Identifying Parts and Controls. 11 Monitor Specifications . 14 Plug and Play Capability . 23 LCD Monitor Quality & Pixel Policy . 27 Maintenance Guidelines . 28 Setting Up the Monitor..................................29 Connecting Your Monitor . 29 Wall Mounting . 32 Operating the Monitor .................................. 33 Power On the Monitor . 33 Using the Front-Panel Controls . .33 Using the On-Screen Display (OSD) Menu. 34 Touch OSD Control . 47 OSD Messages . 48 Setting the Maximum Resolution . 51 Dell Web Management for Monitors .
[Show full text]
State of Michigan Monitor Comparison Guide
State of Michigan Monitor Comparison Guide As of 08/23/2021 For the purpose of this document, we define a monitor as a display screen to provide visual output from a computer, desktop, laptop, or tablet. There are three (3) monitors that are available in Sigma: the Dell 24” Ultrasharp (D123), Dell 27” monitor (D104), and the Dell 24” Touch monitor (T36). NOTE: Numbers listed in this document (DXX, LXX, TXX) are Sigma numbers. Details on each model are on the following pages Dell P2418HT 24” Touch Monitor (T36) – $239.99 This monitor is 24 inches, measured from corner to corner. Full HD with a resolution of 1920 x 1080. 10- point touch system. Articulating monitor stand. Technical Specifications • Diagonal size: 24” • Aspect ratio: Widescreen (16:09) • Resolution: Full HD 1920 X 1080 • Contrast ratio: 1000:1 • Brightness: 250 cd/m2 • 1 x HDMI • 1 x DisplayPort • 1 x VGA • Size without Stand: 21.17” X 2.13” X 12.65” • Weight: 6.88lbs • Cables included: 1 x VGA cable, 1 x DisplayPort cable, 1 x USB cable SOM-Monitor Standard FY21 v13.0 JS Dell U2422H 24” Ultrasharp Monitor (D123) – $209.00 This monitor is 24 inches, measured from corner to corner. Full HD with a resolution of 1920 x 1080. Technical Specifications • Diagonal size: 24” • Aspect ratio: Widescreen (16:09) • Resolution: Full HD 1920 X 1080 • Contrast ratio: 1000:1 • Brightness: 250 cd/m2 • 1 x HDMI port • 1 x DisplayPort (out) • 1 x USB-C upstream port (data only) • 2 x Super speed USB 10Gbps (USB Gen 2) Type-A • 1 x Super speed USB 10Gbps (USB 3.2 Gen 2) Type-A w/power charging • 1 x USB-C downstream port (10Gbps, 15W) • Size with Stand: 21.7” X 7.07” X 14.33” • Weight: 7.75lbs SOM-Monitor Standard FY21 v13.0 JS Dell P2719H 27” Monitor (D104) – $245.00 This monitor is 27 inches, measured from corner to corner.
[Show full text]
Video for Audio Engineers
Video for Audio Engineers David G. Tyas IKON AVS Ltd, 238 Ikon Estate, Hartlebury, Worcs.. DY10 4EU www.ikonavs.com 1. Introduction The purpose of this seminar is to give a practical introduction to the use of both analogue and digital video. ’not intended as an in-depth technical appraisal but more biased towards the practicalities of using video to enhance or augment audio. Its regrettable that all to often a video presentation is let down by poor quality sound, so perhaps with a professional audio engineer in charge, this situation can change. Lets start at the beginning, with that I mean the most basic of analogue video signals you will encounter. My apologies if this appears very basic to some of you, but a brief resume of analogue video will help the migration to digital later. 2. Composite Video The most basic video signal is of course Composite Video; also know as CVBS (Composite Video Blanking Sync). ’normally a single unbalanced signal designed for a single point-to-point connection, rather like the original audio circuits used using impedance matching for reliability. Other than being an unbalanced signal, not a lot different, except for the frequency. Whilst with audio we are typically dealing with a frequency range of 20Hz to 20KHz, more or less, with composite video the frequency is more in the order of 5.5MHz and creates a greater need for due diligence in connection and termination. Video for Audio Engineers – Rev 1.03 page 1 2.1 Correct termination With all video signals it is important to have the correct termination at the receiver (usually a display of some type).
[Show full text]
HDMI/DVI to VGA Converter
ASP-HTV HDMI/DVI to VGA Converter User Manual Manual Number: 100902 Safety and Notice The ASP-HTV has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the ASP-HTV should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. z Follow all instructions and warnings marked on this unit. z Do not attempt to service this unit yourself, except where explained in this manual. z Provide proper ventilation and air circulation and do not use near water. z Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. z Use only the power adapter and power cords and connection cables designed for this unit. z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. Warning! This device is served purely for conversion between video formats. This device CANNOT convert the input/output video resolutions. ~ 1 ~ Introduction This ASP-HTV HDMI/DVI to VGA/Component & Audio Converter offers an easy and instant approach for converting digital HDMI to analog PC video (VGA) and component video (YPbPr) with digital audio (S/PDIF) and analog stereo audio. With this module, YPbPr/VGA based receivers such as LCD monitors or plasma TV can be readily connected to HDMI sources such as DVD players or PS3. In addition, the embedded HDMI / DVI selector facilitates the switch between the HDMI and DVI input sources.
[Show full text]
VGA to DVI Adapter.Indd
VGA to DVI Adapter II USER MANUAL www.gefen.com ASKING FOR ASSISTANCE Technical Support: Telephone (818)772-9100 (800) 545-6900 Fax (818)772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST Write To: Gefen Inc. c/o Customer Service 20600 Nordhoff Street Chatsworth CA 91311 [email protected] -- www.gefen.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. VGA to DVI Adapter is a trademark of Gefen Inc. © 2006 Gefen Inc., All Rights Reserved TABLE OF CONTENTS 1 Introduction 2 Features 3 Panel Descriptions 4 Connecting and Operating the VGA to DVI Adapter 5 Speciﬁ cations 6 Warranty INTRODUCTION Congratulations on your purchase of the VGA to DVI Adapter II. Your complete satisfaction is very important to us. Gefen’s line of KVM (Keyboard Video & Mouse), DVI, ADC, USB, switches, extenders, converters and hubs is designed to make com- puter use more comfortable, more productive and less expensive. KVM switches allow access to multiple computers from a single keyboard, while the ex- tenders give the user control over a computer up to 330 feet away from the work area. Gefen offers solutions for noise, space and security concerns, data center control, in- formation distribution, conference room presentation, and school and corporate training environments. Our Committment Gefen will always offer the ﬁ nest quality product at the best possible price. Included in that price is a lifetime of free support from a team of outstanding engineers.
[Show full text]
Connector Setup Guide
Disconnect all power sources before making any connections Refer to User Manual for complete installtion instructions Débranchez toutes les sources d'énergie avant d'établir tous les rapports Référez-vous au manuel d'utilisateur pour des instructions complètes d'installtion Desconecte todas las fuentes de energía antes de hacer cualesquiera conexiones Refiera al manual de usuario para las instrucciones completas del installtion CONNECTOR SETUP GUIDE CONNECTORS EXCELLENT HDMI Cable BEST VGA BETTER YPbPr BETTER S-VIDEO GOOD (COMOPOSITE CVBS GOOD (RF) COAXIAL CONNECTIONS CABLE BOX/ SATELLITE BOX HDMI Cable 0235 S Video VCR PLAYER YPbPr Audio Cable Coaxial Cable GAME CONSOLE CVBS COMPUTER VGA DEFINITION OF CONNECTORS HDMI - (High-Definition Multimedia Interface) is an interface standard used for audiovisual equipment such S Video - Separate vidoe, abbreviated for Separate video and also known as Y/C is an analog video signal as high-definition television and home theater systems. With 19 wires wrapped in a single cable that that carries the video data as two separate signals, luma (~brightness) and chroma (colour), unlike resembles a USB wire, HDMI is able to carry a bandwidth of 5 Gbps (gigabits per second). This is more than composite video, which carries (lower-quality) picture information as a single signal, or component video, twice the bandwidth needed to transmit multi-channel audio and video, future-proofing HDMI for some time which carries (higher-quality) picture information as three separate signals, typically luma and two chroma to come. This and several other factors make HDMI much more desirable than its predecessors, component components. S-Video, as most commonly implemented, carries 480i or 576i resolution video, i.e.
[Show full text]
VGA Connector Datasheet
VGA connector 1 VGA connector VGA connector (DE-15/HD-15) A female DE-15 output in a laptop computer. Type Computer analog video connector Production history Designer IBM based on D-subminiature Designed 1987 Produced 1987 to present Superseded by DVI (1999) General specifications Hot pluggable No Video signal RGB video signal plus option H and V sync Pins 15 Connector DE-15 Data Data signal I²C data channel for DDC information Pin out A female DE15 socket (videocard side). Pin 1 RED Red video Pin 2 GREEN Green video Pin 3 BLUE Blue video VGA connector 2 Pin 4 ID2/RES formerly Monitor ID bit 2, reserved since E-DDC Pin 5 GND Ground (HSync) Pin 6 RED_RTN Red return Pin 7 GREEN_RTN Green return Pin 8 BLUE_RTN Blue return Pin 9 KEY/PWR formerly key, now +5V DC Pin 10 GND Ground (VSync, DDC) Pin 11 ID0/RES formerly Monitor ID bit 0, reserved since E-DDC Pin 12 ID1/SDA formerly Monitor ID bit 1, I²C data since DDC2 Pin 13 HSync Horizontal sync Pin 14 VSync Vertical sync Pin 15 ID3/SCL formerly Monitor ID bit 3, I²C clock since DDC2 The image and table detail the 15-pin VESA DDC2/E-DDC connector; the diagram’s pin numbering is that of a female connector functioning as the graphics adapter output. In the male connector, this pin numbering corresponds with the mirror image of the cable’s wire-and-solder side. A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector.
[Show full text]
How to Use the Model 9A60 VGA to Component Video Adapter
How to Use the Model 9A60 VGA to Component Video Adapter The Model 9A60 adapts VGA-type RGBHV video sources to Y Pb Pr Component video for use with High Defini- tion Television (HDTV) monitors. With compatible sources and monitors, it permits HDTV images generated by a set top box (STB) or personal computer to be displayed on an HDTV monitor that is capable of displaying the image format being produced by the source. The 9A60 is not a format converter. It passes the horizontal and vertical synchronization timings and pixel content to its outputs without modification. For example, a 1080i RGBHV source with a 9A60 will require your HDTV monitor to accept a 1080i Y Pb Pr component video input. Generally, 1080i, 720p and 480p sources may be dis- played on monitors designed for the desired format, using the 9A60. However, some combinations of sources and televisions may produce undesired display artifacts or fail to work at all. Installation Connect the 9A60 to the HDTV source using the supplied VGA cable and power it up with the included 12 volt power pack. Connect the output of the 9A60 to the HDTV (or “Progressive” or “Digital”) Component input jacks of the monitor. Power up the system and check for a picture. If none appears on the monitor, turn off the power and check and correct format compatibility before restarting the monitor. Caution: Do not operate the monitor for more than a minute with an unstable picture; damage to the deflection circuits or CRTs may result. Regarding the RCA DTC100 The 9A60 in most cases will provide good results when interfacing the DTC100 with HDTV televisions.
[Show full text]